Panasonic Sdr Sw21 Operating Instructions Manual

70VQT2A1771VQT2A17
With still pictures, all scenes are copied at once. With motion pictures\
, either 
all scenes can be copied or specific scenes or scenes on specific dates \
can be 
selected and copied.
Copying still pictures to discs
 Select [BURN DISC] on the [DVD BURNER] display (P.69).
 Select  [PICTURE].Copying begins. Hereafter, operate the unit as 
instructed by the displayed messages.
 To cancel copying
Press . The [DVD BURNER] display now returns.
After copying the still pictures, another...

72VQT2A1773VQT2A17
With other products
4
Using DVD burners 
(sold separately) (cont.)
Motion pictures and still pictures recorded with this unit can be copied\
 to 
discs using DVD burners (sold separately). 
 Copying using a DVD burner
After copying is complete but before erasing the data on the SD card, ch\
eck 
that the disc plays back and that data was copied correctly. (P.73)
While copying is underway, do not turn off the power of the unit or DVD 
burner or disconnect the mini AB USB connection...

72VQT2A1773VQT2A17
With other products
4
Using DVD burners 
(sold separately) (cont.)
Motion pictures and still pictures recorded with this unit can be copied\
 to 
discs using DVD burners (sold separately). 
 Copying using a DVD burner
After copying is complete but before erasing the data on the SD card, ch\
eck 
that the disc plays back and that data was copied correctly. (P.73)
While copying is underway, do not turn off the power of the unit or DVD 
burner or disconnect the mini AB USB connection...

74VQT2A1775VQT2A17
With a 
computer
1Software on the CD-ROM
The supplied CD-ROM contains the software below:
This CD-ROM can only be used on Windows computers.
 Image management/DVD production software VideoCam Suite 2.0This software allows motion pictures and still pictures to be acquired f\
rom this 
unit, edited and output.
The acquired motion pictures and still pictures can also be attached to \
e-mail 
or edited and saved on DVD.
For information about how to use VideoCam Suite, read the PDF...

74VQT2A1775VQT2A17
With a 
computer
1Software on the CD-ROM
The supplied CD-ROM contains the software below:
This CD-ROM can only be used on Windows computers.
 Image management/DVD production software VideoCam Suite 2.0This software allows motion pictures and still pictures to be acquired f\
rom this 
unit, edited and output.
The acquired motion pictures and still pictures can also be attached to \
e-mail 
or edited and saved on DVD.
For information about how to use VideoCam Suite, read the PDF...

76VQT2A1777VQT2A17
With a 
computer
3Operating environmentA computer with the specifications below is required to use this software\
.
 Operating environment required for VideoCam SuitePC IBM® PC/AT compatible personal computer with an Intel® Pentium® 1.0 GHz or higher 
CPU (including compatible CPU)
(When using Playback function and the MPEG2 conversion function, Intel® Pentium® 4 
1.8 GHz or higher is recommended.)
OS Preinstalled
Microsoft® Windows Vista® Home Basic or Service Pack 1
Microsoft®...

76VQT2A1777VQT2A17
With a 
computer
3Operating environmentA computer with the specifications below is required to use this software\
.
 Operating environment required for VideoCam SuitePC IBM® PC/AT compatible personal computer with an Intel® Pentium® 1.0 GHz or higher 
CPU (including compatible CPU)
(When using Playback function and the MPEG2 conversion function, Intel® Pentium® 4 
1.8 GHz or higher is recommended.)
OS Preinstalled
Microsoft® Windows Vista® Home Basic or Service Pack 1
Microsoft®...

78VQT2A1779VQT2A17
With a 
computer
4Installing VideoCam SuiteVideoCam Suite only runs on Windows computers.
Install and uninstall the software with administrator authorization.
●
●
Before installing the software, check your operating environment (P.76) and 
close any other software applications which are running.
Do not perform other computer operations while installing the software.
Do not connect this unit to the computer until installation is complete.\
Install VideoCam Suite only from the supplied...

78VQT2A1779VQT2A17
With a 
computer
4Installing VideoCam SuiteVideoCam Suite only runs on Windows computers.
Install and uninstall the software with administrator authorization.
●
●
Before installing the software, check your operating environment (P.76) and 
close any other software applications which are running.
Do not perform other computer operations while installing the software.
Do not connect this unit to the computer until installation is complete.\
Install VideoCam Suite only from the supplied...

80VQT2A1781VQT2A17
Importing motion pictures and still pictures
When this unit is connected to the computer, VideoCam Suite starts up 
automatically. To use the application with Windows Vista, log on with administrator 
authorization or via a standard user account. Guest accounts cannot be u\
sed. 
To use the application with Windows XP or 2000, log on with administrator 
authorization.
Connect the unit and AC adaptor (P.22) and set the mode dial to a position 
other than [OFF].
Connect this unit and a...