Panasonic Sdr S70 Operating Instructions Manual

101VQT3E42
∫Playback indicationsØ10/ Ø2 Self-timer recording (l 57)
R3000 Remaining number of still 
pictures (l45)
 (White)
 (Red) Still picture recording 
possible status
Recording still picture
HDD Falling detection 
(
l 8)
*3G
1/;/ 5 // 6// 7/8/D/E /
;1 /2;
Display during playback ( l62, 67)
0h00m00s Playback time ( l63)
No.10 Scene number
Repeat playback (l 66)
100-0001 Still picture folder/file name
DPOF already set
(to more than 1) ( l73)
RESUME PLAY ( l66)
Protected motion pictures/
still...

102VQT3E42
∫Indication of connection to 
other devices
∫ Confirmatory indications
∫ Confirmatory indications when 
a DVD burner is connected
Accessing the card ( l95)
Accessing the built-in memory 
( l 95)
*2
Accessing the HDD ( l95)*3
–– (Time 
display) The built-in battery is low. 
(
l 32)
Warning for face-to-face 
recording ( l36)
SD card is not inserted or is 
non-compatible.
The HDD cannot be accessed 
as the Drop Detection Function 
has detected that the unit was 
dropped.
If it detects that the...

103VQT3E42
Others
Indications
2
Messages
Major confirmation/error messages to be indicated on the screen in text.
*1  only
*2  only
RECOMMEND DATA BACK UP PERIODICALLY.*1*2
We recommend backing up important recorded motion pictures and still pictures 
periodically to a PC, DVD disc etc. to protect it. This message does not indicate that there 
is a problem with this unit.
HDD BACKUP RECOMMENDED.*2
There is a possible problem with the HDD. Copy the motion pictures and still pictures 
stored on the HDD to...

104VQT3E42
If faulty management information is found, the messages may appear. Be sure to follow 
directions in the messages. (Repairing may take time depending on the error.)
≥The above message is displayed when abnormal management information is detected 
when the scenes are displayed in thumbnail. To perform the repair, select the scene with 
 in the thumbnail, and start the playback. Please be aware that if the repair fails, 
scenes with   will be deleted.
≥ Use a sufficiently charged battery or the...

105VQT3E42
Others
Helpful hints
1
Functions that cannot be 
used simultaneously
Some functions in this unit are disabled or cannot be selected due to the unit’s 
specifications.
FunctionsConditions which disable the functions
Intelligent Auto Mode ≥In Manual Mode
≥ When the Color night rec function is used
AF/AE tracking ≥In Manual Mode
≥ When the Color night rec function is used
Fade ≥When PRE-REC is used
Auto slow shutter ≥When the Scene mode is used
Backlight compensation ≥When the Color night rec...

106VQT3E42
Others
Helpful hints
2
Troubleshooting
ProblemCheck points
This unit cannot be 
turned on.
This unit does not stay 
on long enough.
Battery runs down 
quickly. ≥
Charge the battery again to ensure it is sufficiently 
charged. ( l20)
≥ In cold places, the battery using time becomes 
shorter.
≥ The battery has a limited life. If the operating time is 
still too short even after the  battery is fully charged, 
the battery has worn out and needs to be replaced.
This unit is turned off...

107VQT3E42
ProblemCheck points
This unit cannot be 
operated though it is 
turned on.
This unit does not 
operate normally. ≥
Remove the battery or AC adaptor, wait about 
1 minute and then reconnect the battery or AC 
adaptor. Then about 1 minute later, turn on the 
power again. (Conducting the above operation while 
the media is being accessed may damage the data 
on the media.)
≥ If normal operation is still not restored, detach the 
power connected, and contact consumer support. 
(l 124, 125)
The...

108VQT3E42
Any scenes/still 
pictures cannot play 
back.≥
Any scenes/still pictures where the thumbnails are 
displayed as   cannot be played back.
Although this unit is 
correctly connected to 
a TV, images cannot 
be seen.
The images are 
squeezed horizontally. ≥
Please read the operating instructions of your TV 
and select the channel that matches the input used 
for the connection.
≥ Change the [TV ASPECT] setting to match the 
aspect ratio of the TV. ( l78)
Scenes cannot be 
deleted. ≥
Release the...

109VQT3E42
When connected by 
the USB cable, this 
unit is not detected by 
the PC.≥
After re-inserting the SD card into the unit, reconnect 
the supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. ( l89, 99)
≥ Connect the supplied USB cable again after 
restarting the PC and turning on this unit again.
When connected by 
the USB cable, this 
unit is not detected by 
the other devices. ≥
When connected to other devices using only the 
battery, reconnect using...

110VQT3E42
Others
Cautions for use
The unit and the SD card become warm 
during use. This is not a malfunction.
Keep this unit as far away as possible 
from electromagnetic equipment (such 
as microwave ovens, TVs, video games 
etc.).
≥If you use this unit on top of or near a TV, 
the pictures and/or sound on this unit may 
be disrupted by electromagnetic wave 
radiation.
≥ Do not use this unit near cell phones 
because doing so may result in noise 
adversely affecting the pictures and/or 
sound.
≥...