Panasonic Sdr S50 Operating Instructions Manual

71VQT2L14
When you stop deleting halfwayPress the MENU button while deleting.
≥The scenes or still pictures that have 
already been deleted when the deletion is 
canceled cannot be restored.
To complete editingPress the MENU button.
≥You can also delete scenes by pressing 
the MENU button, selecting [EDIT 
SCENE]  # [DELETE]  # [ALL SCENES] 
or [SELECT].
≥ You can also delete still pictures by 
pressing the MENU button, selecting 
[PICT. SETUP]  # [DELETE] # [ALL 
SCENES] or [SELECT].
≥ Scenes/still...

72VQT2L14
Playback
Editing
2
Dividing a scene to 
partially delete
This divides the recorded scenes in two and deletes the front half or back half./
¬Change the mode to  , and switch play mode selection to [VIDEO/
Built-inMemory] ( l62)
¬ Change the mode to  , and switch play mode selection to [VIDEO/HDD] 
(l 62)
1Select the menu. ( l27)
2Select the scene to be divided, 
then press the joystick.
3When you reach the point where you 
want to divide the scene
Select [ ] with the joystick.
≥Move the joystick...

73VQT2L14
Playback
Editing
3
DPOF setting
You can write the data selecting still pictures to be printed and the number of prints (DPOF 
data) onto the SD card.
¬Change the mode to  , and switch play mode selection to [PICTURE/
SD CARD] ( l67)
1Select the menu. ( l27)
2Select the still picture to be 
set, then press the joystick.
3Select the number of prints, 
then press the joystick.
≥Up to 999 prints can be selected. (Prints 
for set number can be printed with a 
printer that supports DPOF.)
≥ To cancel...

74VQT2L14
Playback
Editing
4
Copying between SD card and Built-in 
Memory/HDD
Still pictures recorded with this unit can be copied between an SD card inserted in this unit 
and a built-in memory/HDD.
≥Motion pictures cannot be copied to SD card directly, can only be copied to PC.
∫ Confirming remaining capacity on the copy destination
The amount of space left on the SD card , the built-in memory and HDD can be checked.
≥ If the remaining capacity on a single SD card is not enough, you can copy to...

75VQT2L14
≥If there is not much remaining capacity in the SD card, a confirmation message asking to 
copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot 
be restored.
1Change the mode to  .≥Use a sufficiently charged battery or the 
AC adaptor.
2Select the menu. ( l27)
/
≥ Select   to copy information from 
the built-in memory to the SD card, or 
select   to copy information from 
the SD card to the built-in memory, then 
press the center of the joystick to...

76VQT2L14
Playback
Editing
5
Formatting
Please be aware that if a medium is formatted, then all the data recorded on the 
medium will be erased and cannot be restored. Back up important data on a PC, DVD 
disc etc. (l79, 86)
Select the menu. ( l27)
Select [YES], then press the joystick.
≥ After formatting is complete, press the MENU button to close the message screen.
//
1Select [SD CARD], [Built-inMemory] or [HDD] and press the joystick.
2Select [YES], then press the joystick.≥After formatting is...

77VQT2L14
Playback
With a TV
1
Watching Video/Pictures 
on your TV
The motion pictures and still pictures recorded by this unit can be played back on a TV.
≥Use the AC adaptor to free you from worrying about the battery running down.
≥ If you have a TV with an SD card slot, the mo tion pictures and still pictures recorded on an 
SD card may be played back on the TV. (Refer  to the operating instructions of the TV for 
details about TV compatibility.)
1Connect this unit and a TV.
2Turn on this unit, and...

78VQT2L14
∫To watch images on a regular 
TV (4:3) or when both sides of 
the images do not appear on 
the screen
Change the menu setting to display the 
images correctly. (Check the TV setting.)
Select the menu. ( l27)
Example of images with a 16:9 aspect 
ratio on a regular TV (4:3)
≥If a wide-screen TV is connected, adjust 
the aspect setting on the TV. (Refer to the 
operating instructions of the TV for 
details.)
∫ To display the on-screen 
information on the TV
The information displayed on the...

79VQT2L14
Backup
With other products
1
Connecting a DVD burner 
to copy to/play back a disc
Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by 
connecting a DVD burner (optional) to this unit using a Mini AB USB Connection Cable 
(supplied with DVD burner). The copied DVD disc can also be played back.
≥ Please read the operating instructions of the DVD burner for how to use it.
∫ About discs that can be used for copying
*1 Use a new disc. You can additionally copy...

80VQT2L14
1Connect the AC adaptor (supplied with DVD burner) to the DVD 
burner.
≥You cannot supply power to the DVD burner from this unit.
2Connect this unit to the AC adaptor and change the mode to  .
3Connect this unit to the DVD burner with the Mini AB USB 
Connection Cable (supplied with DVD burner).
A Mini AB USB Connection Cable (supplied with DVD burner)
B DVD burner (optional)
≥ Insert the plugs as far as they will go.
4Insert the disc in the DVD burner.≥Insert the DVD disc with the recording...