Panasonic Sdr H80 Operating Instructions Manual
Have a look at the manual Panasonic Sdr H80 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
81LSQT1449 Playback With other products 3 With other video devices [HDD] [SD] You can create a playlist by gathering the scenes on the HDD that you want to record (dub), then record (dub) only the scenes in this playlist to other devices. ( l64) ≥ Use the AC adaptor to free you from worrying about the battery running down. 1Connect this unit to a video device. 2Turn on this unit, then rotate the mode dial to select . 3Select the playback medium by the menu. ( l26) 4Start playback on this unit. Then start recording on the connected device. To stop recording (dubbing) Stop recording on the connected device. Then stop playback on this unit. ∫ Using SD card slot or USB terminal of other video devices If you have a DVD recorder with an SD card slot or a USB terminal, images recorded by this unit can be copied (dubbed) onto the hard disk or a DVD disc. Refer to the operating instructions of your DVD recorder for information about whether or not it supports copying (dubbing) from an SD card or a USB terminal. When using a USB terminal Connect this unit to a DVD recorder with the USB cable (supplied), then select [PC/RECORDER] on the USB function selection screen. ≥For details on how to copy (dub) the images, refer to the operating instructions of the DVD recorder. Recording (dubbing) images onto other video devices A AV cable (supplied) ≥ Insert the plugs as far as they will go. ≥ Do not use any other AV cables except the supplied one. ≥ Select the video input on the video device and TV that this unit and the video device are connected to. VIDEO IN AUDIO IN [MEDIA SELECT] # [HDD] or [SD CARD] If you record (dub) images and then play them back on a wide-screen TV, they may be squeezed horizontally. In this case, refer to the operating instructions of the device you are recording (dubbing) to or read the operating instructions of the wide-screen TV and set the aspect setting to 16:9 (Full). SDR-H90&80P_PC-LSQT1449_mst.book 81 ページ 2009年1月6日 火曜日 午後4時57分
82LSQT1449 Playback With other products 4 With a printer (PictBridge) [HDD] [SD] To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) ¬ Connect this unit to the AC adaptor and turn on the unit. 1Connect this unit to a printer. The USB function selection screen will appear. 2Select [PictBridge] # [HDD] or [SD CARD] then press the joystick. The [ ] indication appears on this unit’s screen. 3Select a file to be printed, then press the joystick. 4Select the desired number of prints, then press the joystick. ≥ You can set up to 9 prints. ≥ To cancel the setting, set the number of prints to [0]. ≥ Up to 8 files can be selected to be printed. 5Press the MENU button to display the PictBridge menus. 6Select the date print setting on [DATE PRINT], then press the joystick. ≥If the printer is not capable of date printing, this setting is unavailable. A USB cable (supplied) ≥ Insert the USB connectors as far as they will go. ≥ Do not use any other US B cables except the supplied one. (Operation is not guaranteed with any other USB cables.) SDR-H90&80P_PC-LSQT1449_mst.book 82 ページ 2009年1月6日 火曜日 午後4時57分
83LSQT1449 7Select the paper size setting on [PAPER SIZE], then press the joystick. [STANDARD]: Size specific to the printer [4k5 INCH]: L size [5 k7 INCH]: 2L size [4 k6 INCH]: Postcard size [A4]: A4 size ≥ You cannot set paper sizes not supported on the printer. 8Select the layout setting on [PAGE LAYOUT], then press the joystick. [STANDARD]: Layout specific to the printer [ ]: No frame print []: Frame print ≥You cannot set page layouts not supported on the printer. 9Select [PRINT] # [YES] and press the joystick. ≥ Exit PictBridge by disconnecting the USB cable after the pictures have been printed. When you want to stop printing halfway Move the joystick down. A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to step 3. ≥Avoid the following operations during printing. These operations disable proper printing. jDisconnecting the USB cable j Opening the SD card slot cover and removing the SD card j Switching the mode dial j Turning off the power ≥ Check the settings for the paper size, quality of print, etc. on the printer. ≥ The sides of pictures recorded in [ ] mode may be cut off. Check before printing (print preview). When using a printer with a trimming or borderless printing function, cancel this function before printing. (Refer to the operating instructions of the printer for details.) ≥ When the unit is connected directly to the printer, the DPOF settings cannot be used. ≥ Connect the printer directly to this unit. Do not use a USB hub. 0.2 SDR-H90&80P_PC-LSQT1449_mst.book 83 ページ 2009年1月6日 火曜日 午後4時57分
84LSQT1449 With a PC Before using 1 What you can do with a PC When you have installed VideoCam Suite from the supplied CD-ROM and connected your PC to the unit, you can perform the operations described below. A Copy images recorded by this unit onto the PC hard disk. B Create original DVD-Video discs. C Edit images copied to a PC. Create playlists. D Play back images recorded by this unit on a PC. E DVD COPY function You can easily create DVD-Video discs. (l 92) F WEB MODE function You can easily upload motion pictures to YouTube. ( l93) ≥VideoCam Suite can handle images recorded with this unit or by using VideoCam Suite. Images created with other video cameras, DVD recorders, software and commercial DVD-Videos are not supported. ≥ We cannot guarantee proper operation of this unit if you use software other than that supplied. ≥ Do not copy images recorded on this unit using any software other than the supplied software. SDR-H90&80P_PC-LSQT1449_mst.book 84 ページ 2009年1月6日 火曜日 午後4時57分
85LSQT1449 With a PC Before using 2 Operating environment ≥A CD-ROM drive is necessary to install the supplied software applications. (A compatible DVD writer drive and media are necessary for writing to a DVD.) ≥ When two or more USB devices are connected to a PC, or when devices are connected through USB hubs or by using extension cables , proper operation is not guaranteed. ≥ Use the supplied USB cable when connecting to t he PC. (Operation is not guaranteed with any other USB cables.) ∫ VideoCam Suite 2.0 Personal computer IBM PC/AT compatible personal computer OSMicrosoft Windows 2000 Professional Service Pack 4 Microsoft Windows XP Home Edition Service Pack 2/Service Pack 3 Microsoft Windows XP Professional Service Pack 2/Service Pack 3 Microsoft Windows Vista Home Basic or Service Pack 1 Microsoft Windows Vista Home Premium or Service Pack 1 Microsoft Windows Vista Ultimate or Service Pack 1 Microsoft Windows Vista Business or Service Pack 1 CPUIntel PentiumIII 1.0 GHz or higher (including compatible CPU) ≥ Intel Pentium 4 1.8 GHz or higher is recommended when a playback function or MPEG2 conv ersion function is used. RAM 512 MB or more (1 GB or more recommended) DisplayHigh Color (16 bit) or more (32 bit or more recommended) Desktop resolution of 1024 k768 pixels or more (1280k1024 pixels or more recommended) Video card supporting DirectX 9.0c (supports overlay of DirectDraw) PCI Express ™k16 compatible recommended Free hard disk space Ultra DMA — 33 or more 450 MB or more (for installing the application) ≥When writing to a DVD or an SD card, more than double the amount of free space as the disc being created is necessary. Necessary software DirectX 10.1 (pre-installed on Windows Vista Service Pack 1) DirectX 10 (pre-installed on Windows Vista) DirectX 9.0c (Windows XP/2000) ≥If you install the software on a PC that is not compatible with DirectX 9.0c, the PC may not work properly. If you are unsure whether or not your PC is compatible, contact the maker of your PC. Sound DirectSound support InterfaceUSB port [Hi-Speed USB (USB 2.0)] Other requirementsMouse or equivalent pointing device SD card reader/writer (required to read and write the SD card) Internet connection SDR-H90&80P_PC-LSQT1449_mst.book 85 ページ 2009年1月6日 火曜日 午後4時57分
86LSQT1449 ≥Even if the system requirements mentioned in t hese operating instructions are fulfilled, some personal computers cannot be used. ≥ Supplied CD-ROM is available for Windows only. ≥ This software is not compatible with Microsoft Windows 3.1, Windows 95, Windows 98, Windows 98SE, Windows Me and Windows NT. ≥ Operation on an upgraded OS is not guaranteed. ≥ Operation on an OS other than the one pre-installed is not guaranteed. ≥ This software is not compatib le with a multi-boot environment. ≥ This software is not compatible with a multi-monitor environment. ≥ Operation is not guaranteed on Microsoft Windows Vista Enterprise, Windows XP Media Center Edition, Tablet PC Edition and not compatible with 64 bit operation systems. ≥ Input is not supported in languages other than English, German, French, Simplified Chinese and Japanese. ≥ If using Windows XP/2000, an administrative account user only can use this software. If using Windows Vista, administrative account and standard a ccount users only can use this software. (An administrative account user should install and uninstall this software.) ≥ DirectX 9.0c will be installe d automatically during installation of the supplied software. ≥ Operation cannot be guaranteed on all DVD drives. ≥ DVD discs authored with this software are not guaranteed to play in all DVD players. ≥ Depending upon the environment of your PC, if it does not support Hi-Speed USB (USB 2.0), for example, frame dropout may occur, the audio may be intermittent, or the software may run slowly when you play back recorded images. ≥ If your PC does not satisfy the above system requirements, an error may occur when writing data to disc. ∫ SD card reader function (mass storage) ≥The USB equipment operates with the driver installed as standard in the OS. Personal computer IBM PC/AT compatible personal computer OSMicrosoft Windows 2000 Professional Service Pack 4 Microsoft Windows XP Home Edition Service Pack 2/Service Pack 3 Microsoft Windows XP Professional Service Pack 2/Service Pack 3 Microsoft Windows Vista Home Basic or Service Pack 1 Microsoft Windows Vista Home Premium or Service Pack 1 Microsoft Windows Vista Ultimate or Service Pack 1 Microsoft Windows Vista Business or Service Pack 1 CPUWindows Vista: 32-bit (k86) Intel Pentium III 1.0 GHz or higher processor Windows XP/2000: Intel Pentium III 450 MHz or higher or Intel Celeron 400 MHz or higher RAM Windows Vista Home Basic: 512 MB or more Windows Vista Home Premium/Ultimate/Business: 1 GB or more Windows XP/2000: 128 MB or more (256 MB or more recommended) InterfaceUSB port SDR-H90&80P_PC-LSQT1449_mst.book 86 ページ 2009年1月6日 火曜日 午後4時57分
87LSQT1449 Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the term s and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Panasonic Corporation (“Panasonic”), its distribut ors or dealers from which you made the purchase. Article 1 License Licensee is granted the right to use the software, including the information recorded or described on the CD-ROM, instruction manuals, and any other media provided to Licensee (collectively “Software”), but all applicable rights to patents, copyrights, tradem arks and trade secrets in the Software are not transferred to Licensee. Article 2 Use by a Third Party Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to use, copy or modify the Software, except as expressly provided for in this Agreement. Article 3 Restrictions on Copying the Software Licensee may make a single copy of the Software in whole or a part solely for back-up purpose. Article 4 Computer Licensee may use the Software only on one computer, and may not use it on more than one computer. Article 5 Reverse Engineering, Decompiling or Disassembly Licensee may not reverse engineer, decompile, or di sassemble the Software, except to the extent either of them is permitted under law or regulation of the country where Licensee resides. Panasonic, or its distributors will not be responsible for any defects in the Software or damage to Licensee caused by Licensee’s reverse engineering, decompiling, or disassembly of the Software. Article 6 Indemnification The Software is provided “AS-IS” without warranty of any kind, either expressed or implied, including, but not limited to, warranties of non-infringement, merchantability and/or fitness for a particular purpose. Further, Panasonic does not warrant that t he operation of the Software will be uninterrupted or error free. Panasonic or any of its distributors will not be liable for any damage suffered by Licensee arising from or in connection with Licensee’s use of the Software. Article 7 Export Control Licensee agrees not to export or re-export to any country the Software in any form without the appropriate export licenses under regulations of the country w here Licensee resides, if necessary. Article 8 Termination of License The right granted to Licensee hereunder will be autom atically terminated if Licensee contravenes any of the terms and conditions of this Agreement. In th is event, Licensee must destroy the Software and related documentation together with all the copies thereof at Licensee’s own expense. End User License Agreement SDR-H90&80P_PC-LSQT1449_mst.book 87 ページ 2009年1月6日 火曜日 午後4時57分
88LSQT1449 With a PC Setup 1 Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close any other software applications which are running. ≥ Do not perform any other operations on your PC while the software is being installed. For Windows Vista: If [User Account Control] dialog appears, click [Continue]. 1Insert the CD-RO M into the PC. ≥If the installation screen does not appear automatically, double-clic k the CD-ROM drive icon in [My Computer (Computer)]. 2Click [Next]. 3Select where the application is to be installed, then click [Next]. 4Select [Yes] or [No] to create shortcut. 5Select the country or region where you live, then click [Next]. ≥ If the country or region cannot be selected, select [NTSC Area]. ≥ When the confirmation message appears, click [Yes]. 6Click [Install] to start the installation process. 7When installation is complete, some notes will appear Check the contents, then close the window. Installing VideoCam Suite SDR-H90&80P_PC-LSQT1449_mst.book 88 ページ 2009年1月6日 火曜日 午後4時57分
89LSQT1449 8Select [Yes, I want to restart my computer now.], then click [Finish]. ≥Depending on the operating environment, you may be required to install DirectX 9.0c. If so, click [Yes], and install it. If you install the software on a PC that is not compatible with DirectX 9.0c, the PC may not work properly. If you are unsure whether or not your PC is compatible, contact the PC manufacturer. Follow the steps below to uninstall the software if it is no longer required. ∫ For Windows Vista 1Select [Start] # [Control Panel] # [Uninstall a program]. 2Select [VideoCam Suite 2.0], then click [Uninstall]. ∫ For Windows XP 1Select [start] # [Control Panel] # [Add or Remove Programs]. 2Select [VideoCam Suite 2.0], then click [Remove]. ∫ For Windows 2000 1Select [Start] # [Settings] # [Control Panel] # [Add/Remove Programs]. 2Select [VideoCam Suite 2.0], then click [Change/Remove]. The PC must be rebooted for the application to work. Uninstalling the software SDR-H90&80P_PC-LSQT1449_mst.book 89 ページ 2009年1月6日 火曜日 午後4時57分
90LSQT1449 With a PC Setup 2 Connection and recognition After the software is installed, the unit must be connected to the PC and be correctly recognized by the PC. ≥Remove the supplied CD-ROM from your PC. ¬ Connect this unit to the AC adaptor and turn on the unit. 1Connect this unit to a PC. The USB function selection screen will appear. 2Select [PC/RECORDER] # [HDD] or [SD CARD] then press the joystick. This unit is automatically detected by the PC. ≥ When the unit is connected to a PC, its power cannot be turned off. Disconnect the USB cable before turning this unit off. (l 91) ≥ Do not disconnect the USB cable or AC adaptor while the access lamp is on or access icon ( or ) appears on the LCD monitor. Doing so may damage the data on the HDD or SD card. ≥ The HDD and SD card cannot be accessed simultaneously. ≥ It may be necessary to reboot the PC after connecting this unit to it for the first time. When the unit is connected to a PC, it is recognized as an external drive. ≥ This unit supports only the readout of data using the PC. The PC cannot write data to the unit, or erase data from the unit. ≥ Depending on the operating environment of the PC, the shape of the drive icon and the drive name will differ.∫ Drive icons The icon is displayed in [My Computer (Computer)]. When accessing the HDD ≥Windows Vista: ≥ Windows XP: ≥ Windows 2000: A USB cable (supplied) ≥ Insert the USB connectors as far as they will go. ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) About the PC display SDR-H90&80P_PC-LSQT1449_mst.book 90 ページ 2009年1月6日 火曜日 午後4時57分