Panasonic Sdr H60 Operating Instructions Manual

							61LSQT1394
Editing
2
Editing scenes
¬Rotate the mode dial to select  .
FunctionOperating method
Locking motion 
pictures
[HDD] [SD]
This is for preventing 
motion picture scenes 
from being deleted by 
mistake.
(However, please be aware 
that if a medium is 
formatted, then all the data 
on the medium will be 
erased.)
¬Select [HDD] or [SD CARD] in [MEDIA SELECT].
1Select the menu. (l28)
[EDIT SCENE] # [LOCK SET] # [YES]
2Select the scene to be protected, then press 
the joystick.
[ ] appears and the selected scene is locked.
≥Press the joystick again to release the lock setting.
≥You can also select multiple scenes in succession.
To complete the settings
Press the MENU button.
SDR-H60P&PC-LSQT1394_mst.book  61 ページ  ２００８年３月４日　火曜日　午後２時３５分 
						

							62LSQT1394
FunctionOperating method
Dividing a scene to 
delete
[HDD]
This divides the recorded 
scenes in two and deletes 
the front half or back half.
¬Select [HDD] in [MEDIA SELECT].
1Select the menu. (l28)
[EDIT SCENE] # [SPLIT&DELETE] # [YES]
2Select the scene to be divided, then press the 
joystick.
3When you reach the point where you want to divide the scene
Select [ ] with the joystick.
≥Move the joystick left or right to fast forward/rewind playback.
≥Using slow-motion playback or frame-by-frame playback makes it 
easy to search for the point where you want to divide the scene. 
(l55)
4Select the half that you want to delete and 
press the joystick.
Continued on next page.
SDR-H60P&PC-LSQT1394_mst.book  62 ページ  ２００８年３月４日　火曜日　午後２時３５分 
						

							63LSQT1394
FunctionOperating method
Dividing a scene to delete
(Continued)5Select [YES], then press the joystick to play 
back the part to be deleted.
≥When [NO] is selected, the confirmation message appears. 
Proceed to step 6.
When you stop the playback, the confirmation message appears.
6Select [YES], then press the joystick.
To continue dividing and deleting other scenes
Repeat steps 2 to 6.
To complete editing
Press the MENU button.
≥It is impossible to divide and delete scenes with a short recording 
time. The length of the remaining scenes must be 3 seconds or 
longer.
≥It is impossible to set the dividing point at the beginning or the 
end of the scene.
≥When a scene that was divided and deleted using the 
SPLIT&DELETE function is copied to a disc using the DVD 
burner or the supplied software and played back on another 
device, a maximum of about 1 second of the deleted part may be 
played back.
≥If a scene with [ ] (copied icon) is divided and deleted, the 
copied information is erased. (l75)
≥The actual division may slightly slip off the previously designated 
dividing point.
SDR-H60P&PC-LSQT1394_mst.book  63 ページ  ２００８年３月４日　火曜日　午後２時３５分 
						

							64LSQT1394
Editing
3
Using playlists
[HDD]
You can create a playlist by gathering your favorite recorded scenes.
Since the playlist is not created by copying data, playlists consume a very small amount of HDD space.
≥When you create or delete playlists, the original scenes will not be modified. Editing scenes on a 
playlist will not affect the original scenes.
≥You can create a playlist on the HDD only. You cannot create a playlist on an SD card.
≥The maximum number of playlists on the HDD: 4
The maximum number of playlist scenes on the HDD: 99
≥If original scenes are deleted, the portion of playlists created with these scenes is also deleted.
¬Rotate the mode dial to select  .
¬Select [HDD] in [MEDIA SELECT].
1Select   (PLAYLIST), then press 
the joystick.
2Select [CREATE], then press the 
joystick.
Creating a new playlist
A
B
ARecorded scenes
BPlaylist
SDR-H60P&PC-LSQT1394_mst.book  64 ページ  ２００８年３月４日　火曜日　午後２時３５分 
						

							65LSQT1394
3Select the scene to be added to 
the playlist, then press the 
joystick.The selected scene is encircled by a red frame.
≥To unselect the scene, press the joystick again.
≥Up to 50 scenes can be selected and added.
≥The scenes are registered in the playlist in the 
order that they were selected.
4Press the MENU button.
5When the confirmation message appears
Select [YES], then press the 
joystick.
Editing scenes on a playlist will not affect the original scenes.
¬Rotate the mode dial to select  .
¬Select [HDD] in [MEDIA SELECT].
1Select   (PLAYLIST), then press 
the joystick.
2Select the playlist to be edited, 
then press the joystick.
Editing a playlist
FunctionOperating method
Deleting scenesThe method for deleting playlist scenes is the same as for 
“Deleting scenes/files”. (l59)
≥If you delete scenes on a playlist, it will not affect the original 
scenes.
≥When [ALL] is selected, the selected playlist will be deleted.
≥You can also delete playlist scenes by the menu. Select [EDIT] # 
[DELETE].
≥Deleting scenes on a playlist will not increase the remaining 
capacity for recording.
≥The playlist itself is deleted if you delete all the scenes in it.
≥When a playlist is deleted, the number of each subsequent 
playlist decreases by one.
SDR-H60P&PC-LSQT1394_mst.book  65 ページ  ２００８年３月４日　火曜日　午後２時３５分 
						

							66LSQT1394
FunctionOperating method
Adding scenes to 
playlist
Scenes can be added to 
the created playlist.
Select the menu. (l28)
[EDIT] # [ADD] # [YES]
The following steps are the same as steps 3 to 5 in “Creating a new 
playlist”. (l64)
Moving scenes 
within a playlist
It is possible to change 
the sequence of scenes in 
the playlist by moving 
them to another position.
1Select the menu. (l28)
[EDIT] # [MOVE] # [YES]
2Select the scene to be moved, then press the 
joystick.
The selected scene is encircled by a red frame, and the position for 
insertion is shown by a yellow bar.
3Select the position to insert the scene, then 
press the joystick.
To continue moving other scenes in the playlist
Repeat steps 2 to 3.
To complete editing
Press the MENU button.
SDR-H60P&PC-LSQT1394_mst.book  66 ページ  ２００８年３月４日　火曜日　午後２時３５分 
						

							67LSQT1394
Editing
4
Editing still pictures
¬Rotate the mode dial to select  .
FunctionOperating method
Locking still pictures
[HDD] [SD]
This is for preventing still 
picture files from being 
deleted by mistake.
(However, please be aware 
that if a medium is 
formatted, then all the data 
on the medium will be 
erased.)
¬Select [HDD] or [SD CARD] in [MEDIA SELECT].
1Select the menu. (l28)
[PICT. SETUP] # [LOCK SET] # [YES]
2Select the file to be protected, then press the 
joystick.
[ ] appears and the selected file is locked.
≥Press the joystick again to release the lock setting.
≥You can also select multiple files in succession.
To complete the settings
Press the MENU button.
SDR-H60P&PC-LSQT1394_mst.book  67 ページ  ２００８年３月４日　火曜日　午後２時３５分 
						

							68LSQT1394
FunctionOperating method
DPOF setting
[SD]
This is for writing the print 
data on selected still 
pictures.
∫What is DPOF?
DPOF (Digital Print Order 
Format) is a format which 
allows the user of a digital 
camera to define which 
captured images on the SD 
card are to be printed, 
together with information on 
the number of copies they 
wish to print. (Please note: 
Not all commercial printing 
services support this feature 
at this time.)
¬Select [SD CARD] in [MEDIA SELECT].
1Select the menu. (l28)
[PICT. SETUP] # [DPOF SET] # [SET]
2Select the file to be set, then press the joystick.
3Select the number of prints, then press the 
joystick.
≥To cancel the setting, set the number of prints to [0].
≥You can also select multiple files in succession.
To complete the settings
Press the MENU button.
To cancel all DPOF settings
Select [PICT. SETUP] # [DPOF SET] # [CANCEL ALL].
≥The DPOF setting can be established for up to 999 files.
≥DPOF settings made on other devices may not be recognized by 
this unit. Please perform the DPOF settings on this unit.
≥You cannot add the recording date to pictures to be printed with 
the DPOF settings.
SDR-H60P&PC-LSQT1394_mst.book  68 ページ  ２００８年３月４日　火曜日　午後２時３５分 
						

							69LSQT1394
FunctionOperating method
Copying still picture 
files
[HDD] [SD]
This is for copying still 
picture files from the HDD 
to an SD card or vice 
versa.
1Select the menu. (l28)
[PICT. SETUP] # [COPY]
2Select desired direction and press the joystick.
:Copying from the HDD to an SD card
:Copying from an SD card to the HDD
3Select [SELECT] or [ALL] then press the 
joystick.
≥When [ALL] is selected, all still picture files in the HDD or SD card 
will be copied. Proceed to step 6.
4(Only when [SELECT] is selected in step 3)
Select the file to be copied, then press the 
joystick.
The selected file is encircled by a red frame.
≥To unselect the scene, press the joystick again.
≥Up to 50 files can be selected to be copied.
≥The files are copied in the order that they were selected.
5(Only when [SELECT] is selected in step 3)
Press the MENU button.
6When the confirmation message appears
Select [YES], then press the joystick.
Continued on next page.
SDR-H60P&PC-LSQT1394_mst.book  69 ページ  ２００８年３月４日　火曜日　午後２時３５分 
						

							70LSQT1394
FunctionOperating method
Copying still picture files
(Continued)(Only when [SELECT] is selected in step 3)
To continue copying other files
Repeat steps 4 to 6.
To cancel copying halfway
Press the MENU button.
To complete editing
Press the MENU button.
≥Do not turn off this unit while copying.
≥When you copy files, use a battery with sufficient battery power or 
use the AC adaptor.
≥Do not open the card slot cover while copying. The copying will 
stop.
≥In case of [ALL], the copying may take time if there are many 
files.
≥The copied files are recorded after the still picture files in the copy 
destination. (The file names or the folder names will differ from 
the original file.)
≥The lock and DPOF settings of the file cannot be copied.
≥When a still picture is copied to an SD card using a PC or other 
equipment, it may not show up on the display of the unit. In this 
case, the image will not be copied to the HDD even if [ALL] is 
selected.
SDR-H60P&PC-LSQT1394_mst.book  70 ページ  ２００８年３月４日　火曜日　午後２時３５分