Home > Panasonic > Camera > Panasonic Sdr H40 Operating Instructions Manual

Panasonic Sdr H40 Operating Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Sdr H40 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11LSQT1337
    Quick Guide
    ∫Charging the battery
    1 Connect the AC cable to the AC adaptor 
    and the AC outlet.
    2 Insert the battery into the battery charger 
    by aligning the arrows.
    ∫Inserting the battery
    Insert the battery until it clicks while paying 
    attention to the direction of the battery.
    APush the center of the battery until it locks.
    ∫Removing the battery
    While pressing the button A, move B in the 
    direction of the arrow to unlock it and then 
    remove the battery.
    ∫How to turn on the power
    While pressing the lock release button A, set 
    the mode dial to , ,  or .
    ≥Align with the status indicator B.
    ≥To turn off the power, set the mode dial to OFF.
    ∫Inserting an SD card
    1 Open the SD card slot cover then Insert 
    the SD card into the card slot.
    2 Securely close the SD card slot cover.
    1
    2
    A
    B
    A
    A
    B
    2
    1
    3
    SDR-H60&41&40P&PC&PL-LSQT1337_mst.book  11 ページ  2007年11月12日 月曜日 午後1時46分 
    						
    							12LSQT1337
    ∫Recording motion pictures
    ≥Rotate the mode dial to select  .
    1 Press the MENU button, then select 
    [MEDIA SELECT] # [HDD] or [SD CARD] 
    to select the recording destination and 
    press the joystick.
    2 Press the recording start/stop button to 
    start recording.
    3 Press the recording start/stop button 
    again to pause recording.
    ∫Recording still pictures
    ≥Rotate the mode dial to select  .
    1 Press the MENU button, then select 
    [MEDIA SELECT] # [HDD] or [SD CARD] 
    to select the recording destination and 
    press the joystick.
    2 Press the recording start/stop button.
    ∫Playback
    ≥Rotate the mode dial to select   or  .
    1 Press the MENU button, then select 
    [MEDIA SELECT] # [HDD] or [SD CARD] 
    to select the desired medium and press 
    the joystick.
    2 Select the scene/file to be played back, 
    then press the joystick.
    3 Select the playback operation with the 
    joystick.
     Motion picture playback
    1/;: Playback/Pause
    :: Skip playback (backward)
    9: Skip playback (forward)
    ∫: Stops the playback and shows the 
    thumbnails.
     Still picture playback
    1/;: Slide show start/pause.
    2;: Plays back the previous picture.
    ;1: Plays back the next picture.
    ∫: Stops the playback and shows the 
    thumbnails.
    SDR-H60&41&40P&PC&PL-LSQT1337_mst.book  12 ページ  2007年11月12日 月曜日 午後1時46分 
    						
    							13LSQT1337
    Preparation
    Recording
    Playback
    With a PC
    Others
    14Before using
    27Setup
    SDR-H60&41&40P&PC&PL-LSQT1337_mst.book  13 ページ  2007年11月12日 月曜日 午後1時46分 
    						
    							14LSQT1337
    Before using
    1
    Parts identification and 
    handling
    1 Open/close switch for the lens cover
    2 Auto button [AUTO] (l34)
    3 Manual button [MANUAL AF/MF] (l48)
    4 Speaker
    5 When recording: Zoom lever [W/T] (l40)
    When playing back: Volume lever 
    [sVOLr] (l55)
    6 LCD monitor open part
    7 LCD monitor
    8 SD card slot cover [SD CARD] (l26)
    9 SD card access lamp [ACCESS] 
    (l25, 90)
    10 Reset button [RESET] (l107)
    8
    67 9101235
    4
    Due to limitations in LCD production 
    technology, there may be some tiny bright 
    or dark spots on the LCD monitor screen. 
    However, this is not a malfunction and 
    does not affect the recorded picture.
    Lens cover
    For the lens protection, be sure to close the 
    lens cover when not in use.
    Slide open/close switch for the lens cover.
    SDR-H60&41&40P&PC&PL-LSQT1337_mst.book  14 ページ  2007年11月12日 月曜日 午後1時46分 
    						
    							15LSQT1337
    11 L e n s
    12 Grip belt
    13 Microphone (built-in, stereo)
    14 White balance sensor (l51)
    LCD monitor
    Pull the LCD monitor out in the direction of 
    the arrow with your fingers.
    ≥It can open up to 90o.
    ≥It can rotate up to 180o A towards the lens 
    or 90o B towards the opposite direction.
    ≥The brightness and color level of the LCD 
    monitor can be adjusted. (l32)
    BA
    Grip belt
    Adjust the belt length and the pad position.
    1Flip the belt.
    2Adjust the length.
    3Replace the belt.
    (U.S.A. only):
    When this unit is purchased, a sensor tag is 
    attached to the grip belt. Remove the tag 
    before use.
    13
    11
    12
    14
    31
    2
    SDR-H60&41&40P&PC&PL-LSQT1337_mst.book  15 ページ  2007年11月12日 月曜日 午後1時46分 
    						
    							16LSQT1337
    15 Image stabilizer button [ , O.I.S.] (l42)
    16 Power LCD plus button 
    [POWER LCD PLUS] (l32)
    17 DVD COPY button [DVD COPY] (l93)
    18 HDD access lamp [ACCESS HDD] 
    (l25, 90)
    19 Status indicator (l27)
    20 Mode dial (l27)
    21 Joystick
    22 Recording start/stop button (l35, 38)
    23 Menu button [MENU] (l28)
    24 Delete button [ ] (l59)
    25 Terminal cover
    26 USB terminal [ ] (l74, 81, 90)
    27 Audio-video output terminal [A/V] 
    (l72, 80)
    19
    15
    16
    17
    182
    4
    23
    20
    22
    21
    26
    25
    27
    Joystick
    Use the joystick to select the recording 
    functions and playback operations, and to 
    operate the menu screen.
    Move the joystick up, down, left, or right to 
    select a setting or scene, and then press 
    the joystick to set it.
    1Select by moving up, down, left, or right.
    2Set by pressing the center.
    ≥Menu screen operations (l28)
    ≥To select the recording functions (l43)
    ≥To adjust manually (l48)
    ≥Playback operations (l54, 57)
    12
    SDR-H60&41&40P&PC&PL-LSQT1337_mst.book  16 ページ  2007年11月12日 月曜日 午後1時46分 
    						
    							17LSQT1337
    28 SD card slot (l26)
    29 Tripod receptacle
    30 Battery holder (l19, 21)
    31 Battery release lever [BATTERY] 
    (l19, 21)
    Tripod receptacle
    This is a hole for attaching the unit to the 
    optional tripod.
    ≥When the tripod is used, the SD card slot 
    cover cannot be opened. Insert an SD card 
    and the battery before attaching this unit to 
    the tripod. (l19, 26)
    29 30
    31
    28
    SDR-H60&41&40P&PC&PL-LSQT1337_mst.book  17 ページ  2007年11月12日 月曜日 午後1時46分 
    						
    							18LSQT1337
    Before using
    2
    Power supply
    ∫About batteries that you can use with this unit
    The Panasonic battery that can be used with this unit is Supplied battery/VW-VBG130/VW-
    VBG260/VW-VBG6.
    Supplied battery/VW-VBG130/VW-VBG260/VW-VBG6 come with a function to check whether the 
    battery and unit can be safely used together.
    ≥The battery pack holder kit VW-VH04 (optional) is necessary if using VW-VBG260/VW-VBG6.
    ≥Batteries made by other companies which have been certified by Panasonic may be used with this 
    unit, but we offer no guarantee as to the quality, performance or safety of such batteries.
    ≥In order to safely use the unit we recommend that you use genuine Panasonic batteries which have 
    been subject to our quality control process.
    ≥We cannot accept any liability whatsoever for damages to the unit or accidents caused by 
    non-genuine Panasonic batteries (including those that have been certified by Panasonic).
    ≥Exercise care when purchasing batteries. Many fake or imitation batteries have been found among 
    those sold at unusually low prices and those which customers cannot check for themselves before 
    purchasing.
    When this unit is purchased, the battery is not charged. Charge the battery before using this unit.
    Important:
    If the DC cable is connected to the AC adaptor, the battery will not charge. Remove the DC cable 
    from the AC adaptor.
    Charging the battery
    Charging lamp [CHARGE]A
    Lights up:
    Charging (l20, Charging time)
    Goes off:
    Charging completed
    Flashing:
    ≥When the battery temperature is excessively 
    high or low, the lamp flashes and the charging 
    time will be longer than normal.
    ≥Remove dirt, foreign objects or dust on the 
    terminals of the battery or the AC adaptor.
    If the lamp is still flashing, something may be 
    wrong with the battery or AC adaptor.
    Contact consumer support (l122, 123).
    1 2
    A
    SDR-H60&41&40P&PC&PL-LSQT1337_mst.book  18 ページ  2007年11月12日 月曜日 午後1時46分 
    						
    							19LSQT1337
    1Connect the AC cable to the AC adaptor and the AC outlet.
    2Insert the battery on the battery charger by aligning the arrows.
    ≥We recommend using Panasonic batteries. (l9, 20, 118)
    ≥If you use other batteries, we cannot guarantee the quality of this product.
    Insert the battery until it clicks while paying attention to the direction of the 
    battery.
    APush the center of the battery until it locks.
    ≥Be sure to set the mode dial to OFF and check 
    that the status indicator is off before removing 
    the battery.
    ≥Do not heat or expose to flame.
    ≥Do not leave a battery pack in an automobile 
    exposed to direct sunlight for a long period of 
    time with doors and windows closed.
    Inserting the battery
    A
    Removing the battery
    While pressing button B, move C in the 
    direction of the arrow to unlock it and then 
    remove the battery.
    ≥Hold the battery with your hand so that it 
    does not fall.
    C
    B
    CAUTION
    Danger of explosion if battery is incorrectly 
    replaced. Replace only with the same or 
    equivalent type recommended by the 
    manufacturer. Dispose of used batteries 
    according to the manufacturer’s instructions.
    SDR-H60&41&40P&PC&PL-LSQT1337_mst.book  19 ページ  2007年11月12日 月曜日 午後1時46分 
    						
    							20LSQT1337
    ∫Charging time
    ≥Temperature: 25oC (77oF)/humidity: 60%
    ≥If the temperature is higher or lower than 25oC (77oF), the charging time will become longer.
    ∫Recordable time
    ≥Temperature: 25oC (77oF)/humidity: 60%
    ≥These times are approximations.
    ≥The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, 
    turning the unit on/off, moving the zoom lever, etc.
    ≥The recordable times will vary depending on the status of use. The recordable time will become 
    shorter when you use this unit with the LCD monitor lit up by pressing the POWER LCD PLUS button.
    ≥Be aware that low temperatures will shorten the amount of time the battery will remain charged. We 
    recommend carrying a spare battery.
    ≥The batteries heat up after use or charging. This unit will also heat up while being used. This is not a 
    malfunction.
    Charging time and recordable time
    Battery model numberVoltage/capacityCharging time
    Supplied battery 7.2 V/770 mAh 1 h 35 min
    VW-VBG130 (optional) 7.2 V/1320 mAh 2 h 35 min
    VW-VBG260 (optional) 7.2 V/2640 mAh 4 h 40 min
    VW-VBG6 (optional) 7.2 V/5800 mAh 9 h 25 min
    Battery model 
    numberVo l t a g e /
    capacityRecording 
    destinationMaximum 
    continuously 
    recordable timeActual recordable 
    time
    Supplied battery 7.2 V/770 mAh[HDD]1h35min 50min
    [SD]1h45min 55min
    VW-VBG130 
    (optional)7.2 V/1320 mAh[HDD]2h55min 1h30min
    [SD]3h10min 1h45min
    VW-VBG260 
    (optional)7.2 V/2640 mAh[HDD]5h50min 3h5min
    [SD]6h20min 3h35min
    VW-VBG6 
    (optional)7.2 V/5800 mAh[HDD]13h25min 7h10min
    [SD]14h30min 8h15min
    Battery capacity indication
    ≥The display changes to the following indications step-by-step as the battery capacity decreases.
    ####
    ≥If the battery discharges, then   ( ) will flash.
    SDR-H60&41&40P&PC&PL-LSQT1337_mst.book  20 ページ  2007年11月12日 月曜日 午後1時46分 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Sdr H40 Operating Instructions Manual