Panasonic Sdr H20 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Sdr H20 Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 11
Before using 11LSQT1190 ∫Editing scenes! (l66, 67) You can create an original video (playlist) by collecting together your favorite scenes recorded on the HDD. ∫Using with a computer! (l82) If you use the supplied software, you can create a backup DVD of the scenes recorded on this unit with just one button. You can also make an original DVD-Video by exporting the scenes to a computer and then editing them. LSQT1190(ENG).book 11 ページ 2007年1月13日 土曜日 午後3時32分
Page 12
12LSQT1190 Before using Quick Guide ∫Charging the battery 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Put the battery on the battery mount by aligning the mark, and then securely plug it in. ∫Inserting the battery Push the battery against the battery holder and slide it until it clicks. ∫Removing the battery While sliding the BATTERY lever, slide the battery to remove it. ∫How to turn on/off the power Set the OFF/ON switch to ON/OFF. ≥(SDR-H200) Open the lens cover before turning...
Page 13
13LSQT1190 Before using 2 Insert/remove the SD card into/from the card slot. 3 Securely close the card slot cover. ∫Recording motion pictures ≥Rotate the mode dial to select . 1 Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] to select the recording destination and press the joystick.2 Press the recording start/stop button to start recording. 3 Press the recording start/stop button again to pause recording. ∫Recording still pictures ≥Rotate the mode dial to select . 1 Press...
Page 14
14LSQT1190 Before using 3 Press the Photoshot button [ ] fully to take the picture. SDR-H20/SDR-H18: Press the Photoshot button [ ]. ∫Motion picture playback ≥Rotate the mode dial to select . 1 Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] to select the desired medium and press the joystick. 2 Select the scene to be played back. 3 Press the joystick.4 Move the joystick to operate. ∫Still picture playback ≥Rotate the mode dial to select . 1 Press the MENU button, then select...
Page 15
15LSQT1190 Before using Accessories Check the accessories before using this unit. 1/;: Slide show start/pause. E: Plays back the previous picture. D: Plays back the next picture. ∫: Stops the playback and shows the thumbnails.SD Memory Card (512 MB) (SDR-H200/SDR-H20) RP-SDR512 Battery pack (SDR-H200) CGA-DU12 Battery pack (SDR-H20/SDR-H18) CGR-DU06 AC adaptor PV-DAC14D AC cable K2CA2CA00029 or K2CA2CA00025 DC cable K2GJ2DC00011 or K2GJ2DC00015 AV/S cable K2KZ9CB00001 Remote control (SDR-H200)...
Page 16
16LSQT1190 Before using Parts identification and handling 1Lens ≥Do not attach a conversion lens or a filter to this unit as it will cause vignetting. 2 Lens cover (SDR-H200) 3 Video light (SDR-H200) (l49) 4 White balance sensor (l57) Remote control sensor (SDR-H200) (l20) 5 Microphone (built-in, stereo)6 Terminal cover 7 Menu button [MENU] (l34) 8 DC input terminal [DC/C.C. IN] (l28) 9 LCD monitor open part (l19) 10 Battery holder (l25) 11 Audio-video output terminal [A/V] (l77, 78) 12 Status...
Page 17
17LSQT1190 Before using 24 Card slot (l29) 25 Tripod receptacle (l18) 26 Battery release lever [BATTERY] (l25) 27 LCD monitor (l19) 28 Card slot open lever (l29) 29 DVD COPY button [DVD COPY] (l88) 30 Speaker 31 Power LCD plus button [POWER LCD PLUS] (l37) 32 Video light button [LIGHT] (SDR-H200) (l49) 33 Reset button [RESET] (l116) 34 Mode select switch [AUTO/MANUAL/ FOCUS] (l40, 55, 56) 35 Card slot cover [SD CARD] (l29) 36 Card access lamp [ACCESS] (l24, 87, 97)37 Grip belt (l17) Adjust the belt...
Page 18
18LSQT1190 Before using For the lens protection, be sure to close the lens cover when not in use. Rotate the lens cover open/close ring. Attach the lens cap to protect the surface of the lens. 1Pass the end of the lens cap cord through the belt. 2Pass the lens cap through the loop. 3To attach or remove the lens cap, hold both sides of the lens cap with the tips of your finger and thumb. During recording The removed lens cap can be attached to the lens cap fixture. This is a hole for attaching the...
Page 19
19LSQT1190 Before using You can record the image while viewing it on the LCD monitor. 1Place your finger on the LCD monitor open part A and pull the LCD monitor out in the direction of the arrow. ≥It can open up to 90o. 2Adjust the angle of the LCD monitor as desired. ≥It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. ≥The brightness and color level of the LCD monitor can be adjusted from the menu. (l37) ≥The unit may be damaged or fail if the LCD monitor is...
Page 20
20LSQT1190 Before using 1While pressing the stopper A, pull out the battery holder. 2Set the button-type battery with its (r) mark facing upward and then put the battery holder back in place. ∫Concerning the button-type battery ≥When the button-type battery runs down, replace it with a new battery (part number: CR2025). The battery should normally last about 1 year, however this depends on how frequently the unit is used. ≥Keep the button-type battery out of the reach of children. ∫Remote...