Panasonic Sc Pt175ee K Operating Instructions

							11
RQTX0246
Getting Started
 
The Easy setup screen assists you in making necessary 
settings.
≥LanguageSelect the language used on menu screen.
≥TV aspect
Select the aspect to suit your TV.≥Speaker check
Listen to speaker output to confirm speaker connections.
≥Speaker outputMake surround sound setting for speaker output.
≥TV audio
Select the audio input connection from your TV.
For AUX connection (B9): Select “AUX”.
For OPTICAL IN connection (
B9): Select “DIGITAL IN”.
This will be the TV audio setting for VIERA Link “HDAVI 
Control”. (B22)
[Note]
≥If this unit is connected to a “HDAVI Control 3 or later” 
compatible TV via HDMI cable, the menu language 
and TV aspect information will be retrieved via VIERA 
Link.
≥If this unit is connected to a “HDAVI Control 2” 
compatible TV via HDMI cable, the menu language 
information will be retrieved via VIERA Link.
≥Settings in the Easy setup can also be changed in the 
player settings [e.g. language, TV aspect, speaker 
level and TV audio (B25)].
step 6EASY SETUP
Preparation
Turn on your TV and select the 
appropriate video input mode (e.g. 
VIDEO 1, AV 1, HDMI, etc.) to suit the 
connections to this unit.
≥To change your TV’s video input mode, 
refer to its operating instructions.
≥This remote control can perform 
some basic TV operations (B38).
1Turn on the unit.
≥When the Easy setup screen 
appears automatically, skip step 
2 to 6.
2Select “DVD/CD”.
3Show the setup menu.
4Select “OTHERS”.
5Select “EASY SETUP”.
6Select “SET”.
7Select “Ye s”.
8Follow the messages and 
make the settings.
(Bright, Easy setup settings)
9Finish Easy setup.
DV DDVD
OK
SETUP
OK
SETUP
DVD
-CH SELECT
SETUP
SET
MAINDISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
EXIT : SETUP
RETURN
Menu
OK
OK
OK
OK
OK
OK
Easy setup settings
QUICK START GUIDEQUICK START GUIDEQUICK START GUIDE
step 6
SC-PT170-175EB-RQTX0246-B_eng.book  Page 11  Wednesday, February 4, 2009  3:20 PM
 
						

							12
RQTX0246
Getting Started Playing Discs Other Operations Reference
 
Setting up the radio
Up to 30 stations can be set.
≥“SET OK” is displayed when the stations are set, and 
the radio tunes to the last preset station.
≥“ERROR” is displayed when automatic presetting is 
unsuccessful. Preset the channels manually (B13).≥The FM setting is also shown on the TV display.
Press and hold the button again to cancel the mode.≥The mode is also cancelled when you change the 
frequency.
Presetting stations automatically
1Select “FM”.
≥This unit:
Press [SELECTOR].
2Each time you press the button:LOWEST (factory preset):
To begin auto preset with the lowest 
frequency.
CURRENT:
To begin auto preset with the current 
frequency.§
§
 To change the frequency, refer 
to “Manual tuning” (Bright).
3
(press and hold)
Release the button when 
“FM AUTO” is displayed.
e.g. Display
≥This unit:
Press and hold [MEMORY].
The tuner starts to preset all the 
stations it can receive into the 
channels in ascending order.
123
456
78
0
9
SEARCHSEARCH
OK
EXT-INRADIO10
MENU
SKIPSKIP
,SEARCH
Numbered
buttons
RADIO
OK PLAY MODE
MENU
,
PLAY MODE
SELECTORTUNE
MEMORY -TUNE MODE/—FM MODE
EXT-INRADIO
MENU
PLAY
LIST
OK
Confirming the preset channels
1Select “FM”.
≥This unit:
Press [SELECTOR].
2Select the channel.
≥To select a 2-digit number
e.g. 12: [S10] B [1] B [2]
e.g. Display
Alternatively, press [
X,W].≥This unit:
Press [-TUNE MODE] to select 
“PRESET” on the display, and 
then press [XTUNEW] to select 
the channel.
When a stereo FM broadcast is 
being received, “ST” lights in the 
display.
e.g. Display
If noise is excessive
Press and hold 
[PLAY MODE] (this unit: 
[—FM MODE]) to display 
“MONO”.e.g. Display
Manual tuning
1Select “FM”.
≥This unit:
Press [SELECTOR].
2Select the frequency.
≥This unit:
Press [-TUNE MODE] to select 
“MANUAL” on the display, and 
then press [XTUNEW] to select 
the frequency.
≥To start automatic tuning, press 
and hold 
[6, 5] (this unit: 
[XTUNEW]) until the frequency 
starts scrolling. Tuning stops 
when a station is found.
EXT-INRADIO
123
456
78
0
9
10
ST
MONO
EXT-INRADIO
SEARCHSEARCH
SC-PT170-175EB-RQTX0246-B_eng.book  Page 12  Wednesday, February 4, 2009  3:20 PM
 
						

							13
RQTX0246
Getting Started Playing Discs Other Operations Reference
 
Up to 30 stations can be set.
A station previously stored is overwritten when another 
station is stored in the same channel preset.
Selecting the playback source
You can select sound effects, desired source, or access 
playback/menus by using the START menu.
When “Input Selection” is selected
You can select a desired source from the menu.≥DVD/CD (B11 ) ,  F M  (B12), AV (B14), AUX§ (B14), 
DIGITAL IN§ (B14), USB (B24), MUSIC PORT (B24)§“(TV)” will appear beside “AUX” or “DIGITAL IN”, 
indicating the TV audio setting for VIERA Link “HDAVI 
Control” (B22).
When “Sound” is selected
You can select sound quality settings (B15, Equalizer).
When a disc is loaded or an USB device is connected, you 
can also access playback or menus from the START menu.
e.g. 
[DVD-V]
When the on-screen control panel appears
e.g. [DVD-V] (when “Playback Disc” is selected from the 
START menu)
You can operate the playback with the indicated controls.
(Continued on next page)
Presetting stations manually
1
While listening to the radio broadcastPress [OK].2While the frequency is flashing on the displayPress the numbered buttons to select a channel.
≥To select a 2-digit number
e.g. 12: [S10] B [1] B [2]
e.g. Display
Alternatively, press [X,W], and then press [OK].
This unit:1While listening to the radio broadcastPress [MEMORY] twice.
2While a channel number is flashing on the displayPress [XTUNEW], and then press [MEMORY].
Selecting the source from the START menu
1Show the START menu.
This unit automatically turns on.
(The TV also turns on when using 
VIERA Link “HDAVI Control”. This 
works only when in “DVD/CD” or 
“USB” mode without any disc/device 
being loaded/connected.)
e.g.
2Select an item.
≥To exit, press [START].
3Make the setting.
OK
START
OK
START
START
DVD/CD Home Cinema
OK
RETURN
Input Selection
Sound
OK
OK
DVD/CD Home Cinema
OK
RETURN
Input Selection
Sound Playback Disc
TOP  MENU (DVD)
MENU (DVD)
Playback/menu access
SC-PT170-175EB-RQTX0246-B_eng.book  Page 13  Wednesday, February 4, 2009  3:20 PM
 
						

							14
RQTX0246
Getting Started Playing Discs Other Operations Reference
 
Selecting the playback source (continued)
Press [SELECTOR] on this unit to select source from this 
unit. (B39)
[Note]Confirm the audio connection to the SCART (AV), AUX or 
OPTICAL IN terminal on this unit when you select the 
corresponding sources (
B9). Reduce the volume on the TV 
to its minimum, and then adjust the volume of this unit.
Select to suit the type of audio from the OPTICAL IN 
terminal on this unit.
(When receiving true 5.1-channel surround sound, select 
“PCM OFF”.)
[Note]
≥Audio that is input through the OPTICAL IN terminal is 
not output from the HDMI terminal.
≥Underlined items in the above paragraphs are factory 
settings.
Enjoying sound from all speakers and various 
sound effects
≥The following sound effects may not be available or 
may have no effect with some sources.
≥
You may experience a reduction in sound quality when 
these sound effects are used with some sources. If this 
occurs, turn the sound effects off.
Selecting the source by the remote control
DVD/CD (B11 )
Each time you press the button:FM (B12)
AV:
AUX
§:
D-IN
§:
MUSIC P.:
For audio input through the 
SCART (AV) terminal.
For audio input through the 
AUX terminal.
For audio input through the 
OPTICAL IN terminal. 
(
Bright)
For audio input through 
MUSIC PORT. (
B24)
§“(TV)” will appear beside “AUX” or 
“D-IN”, indicating the TV audio 
setting for VIERA Link “HDAVI 
Control” (B22).
USB (B24)
DV DUSB
EXT-INRADIO
SETUP
DVD
USBRADIO, EXT-IN
SETUP
DVD
EXT-INRADIO
USB
Making settings for digital audio input
1
While in “D-IN” modePress [SETUP] to select “MAIN/SAP”, “DRC” or 
“PCM FIX”.
2While the selected mode is displayedPress [3,4] to make the setting.
MAIN/SAP mode
 (Only works with Dolby Dual Mono):MAIN, SAP§, MAIN+SAP§ (stereo audio)§“SAP” = Secondary Audio Program
Dynamic Range Compression
DRC ON:
Adjust for clarity even when the volume is 
low by compressing the range of the lowest 
sound level and the highest sound level. 
Convenient for late night viewing. (Only 
works with Dolby Digital)
DRC OFF:The full dynamic range of the signal is 
reproduced.
PCM FIX mode
PCM ON:
Select when receiving only PCM signals.
PCM OFF:Select when receiving Dolby Digital and 
PCM signals.
VOL
OK
SOUNDSURROUND
-CH SELECTSETUPW.SRD
OK
W.SRD
+,    VOL
SETUP,
─ CH SELECTSURROUND
SOUND
Enjoying surround sound effects
SURROUND OUTPUT indicator on 
this unit will light up when there is 
surround sound effect.
Each time you press the button:
STANDARD:
Sound is output as it was recorded/
encoded.
Speaker output varies depending on 
the source.
MULTI-CH:
You can enjoy sound from the front 
speakers, as well as the surround 
speakers even when playing a 2-
channel sound or non-surround 
sound.
MANUAL: (B15)
SURROUND
SC-PT170-175EB-RQTX0246-B_eng.book  Page 14  Wednesday, February 4, 2009  3:20 PM
 
						

							15
RQTX0246
Getting Started Playing Discs Other Operations Reference
 
§ “ÎPLII” lights in this unit’s display when there is 
effect.
Except [DivX]
You can enhance the surround effect for low volume 5.1-
channel sound. (Convenient for late night viewing.)
Preparation
≥To display the picture, turn on the TV and select the 
appropriate video input mode.
≥Press [r, s VOL] to adjust the volume to normal 
listening level.
≥Select “TEST TONE” from “SPEAKER SETTINGS” in 
AUDIO menu (B26).
(Effective when playing 5.1-channel sound or when 
“ÎPLII” lights.)
While “MANUAL” 
is displayedSelect other surround modes.
Each time you press [2,1]:PLII MOVIE§
Suitable for movie software, or 
softwares recorded in Dolby 
Surround. (except
 [DivX])PLII MUSIC§
Adds 5.1-channel effects to stereo 
sources. (except [DivX])S.SRND
You can enjoy sound from all 
speakers with stereo sources. 
(Surround output will be in mono.)
STEREO
Sound will only be output to the front 
speakers and the subwoofer from any 
source.
Recommended modes to enjoy TV audio or stereo 
sources from all speakers:
≥PLII MOVIE
≥PLII MUSIC
≥S.SRND
Selecting sound mode
1Select a sound mode.
Each time you press the button:EQ: Equalizer
SUBW LVL: Subwoofer Level
C.FOCUS: Center Focus
2While the 
selected mode 
is displayedMake settings.Refer to the following for setting 
details of each sound effect.
Equalizer
You can select sound quality settings.
Each time you press [2,1]:HEAVY:Adds punch to rock.
CLEAR:Clarifies higher sounds.
SOFT:For background music.
FLAT:Cancel (no effect is added).
Subwoofer level
You can adjust the amount of bass. The unit 
automatically selects the most suitable setting 
according to the type of playback source.
SUB W 1 ,# SUB W 2 ,# SUB W 3 ,# SUB W 4^-------------------------------------------------------------------J
≥The setting you make is retained and recalled 
every time you play the same type of source.
Center Focus
(Effective when playing audio containing center 
channel sound or when “
ÎPLII” lights in this 
unit display.)
You can make the sound of the center speaker seem 
like it is coming from within the TV.
C.FOCUS ON
,------.C.FOCUS OFF
SOUND
Whisper-mode Surround
≥“(( ))” lights when there is effect.
e.g. Display
Each time you press the button:
WHISPER-MODE SRD ON

WHISPER-MODE SRD OFF
Adjusting the speaker output level manually
1Enter test tone mode.
Test tone will be output to each 
channel in the following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND 
LEFT
2Adjust the speaker level for each 
speaker. (CENTER, SURROUND 
RIGHT, SURROUND LEFT)
`6dB to i6 dB (Factory preset: 
0dB)
≥To exit the screen, press 
[SETUP].
To adjust speaker level during play
1
Press and hold [—CH SELECT] to select the speaker.While the speaker channel is displayed, press 
[—CH SELECT].
L
# C# R# RS# LS# SW^---------------------------------------------}
≥You can adjust SW (Subwoofer) only if the disc 
includes a subwoofer channel and “ÎPLII” is not lit.
≥
“S” appears on this unit’s display when you have 
selected “S.SRND” (
B14, Enjoying surround sound 
effects). In this case, you can adjust both surround 
speaker levels at the same time using 
[3,4].
S: `6dB to i6dB
2
Press [3] (increase) or [4] (decrease) to adjust the 
speaker level for each speaker.
C, RS, LS, SW: `6dB to i6dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while “L” or “R” 
is selected, press [
2,1].
W.SRD
OKe.g.
SET
RETURN
AUDIO-SPEAKER SETTINGS-TEST TONESPEAKER
LEFT
CENTER
RIGHT
SURROUND RIGHT
SURROUND LEFTTRIM LEVEL
−  −
0dB
−  −
0dB
0dB
EXIT : SETUP
OK
SC-PT170-175EB-RQTX0246-B_eng.book  Page 15  Wednesday, February 4, 2009  3:20 PM
 
						

							16
RQTX0246
Getting Started Playing Discs Other Operations Reference
 
Basic play
Preparation
To display the picture, turn on your TV and change its video input mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the 
connections to this unit.
[Note]
≥DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.
To preserve the unit’s motor and your TV screen, press [∫] (Stop) when you are finished with the menus.
≥Total title number may not be displayed properly on iR/iRW.
≥ABOUT DIVX VIDEO:
DivX
® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video.
If you are experiencing problems, refer to troubleshooting (B32 to 34)
Using this unit
TUNESELECTOR
VOLUME
TUNE3
45
  , + VOLUME
OPEN CLOSE
21SELECTOR
MEMORY
(Stop)
Start play.
≥Turn [s, r VOLUME] 
to adjust the volume.
Select “DVD/CD”. Turn on the unit.
Press to skip.
Press and hold to:
– search during play
– start slow-motion play 
during pause
≥Press [1] (Play) to 
start normal play.
Open the disc tray.
Load the disc.
≥Load double-sided 
discs so the label for 
the side you want to 
play is facing up.
≥For DVD-RAM, 
remove the disc 
from its 
cartridge before use.Label facing up
SC-PT170-175EB-RQTX0246-B_eng.book  Page 16  Wednesday, February 4, 2009  3:20 PM
 
						

							17
RQTX0246
Getting Started Playing Discs Other Operations Reference
 
Using the remote control
One touch
play
(during 
standby mode)
(Remote control only)
This unit automatically turns 
on and starts playing the 
disc in the tray.
StopThe position is memorised 
while “RESUME STOP” is 
on the screen.
≥Press [1PLAY] to 
resume.
≥Press [∫STOP] again to 
clear the position.
Pause≥Press [1PLAY] to restart 
play.
Skip
Search
(during play)
≥Up to 5 steps.
≥Press [1PLAY] to start 
normal play.
Slow-motion(during pause)≥[VCD] Slow-motion: 
Forward direction only.
≥[MPEG4] [DivX] 
Slow-
motion: Does not work.
Frame-by-
frame
(during pause)
[DVD-VR] [DVD-V] [VCD]
≥[DVD-VR] [VCD] Forward 
direction only.
RETURN
VOL
STOP
123
456
78
0
9
SEARCH
SKIPSLOWSKIP
PLAY
PA U S E
SEARCH
OK
DV D
 TOP MENU
10
&+4%60#8+)#614
PLAYLISTMENU
FL DISPLAY
1
25SLOW, SEARCH,
STOP
OK
RETURNMENU, PLAY LIST
FL DISPLAY
TOP MENU,
DIRECT 
NAVIGATOR
Numbered
buttons+,    VOL
PAUSE,SKIP
PLAY
STOP
PAUSE
SKIPSKIP—
SEARCH
SLOW
SEARCH
OK
On-screen 
item select
Enter number[DVD-VR] [DVD-V] [VCD] [CD]e.g. To select 12:
[S10] B [1] B [2]
[VCD] with playback control
Press [∫STOP] to cancel 
the PBC function, and then 
press the numbered buttons.
Disc menu[DVD-V]Shows a disc top menu.
[DVD-VR]Press the button to show the 
programs (B19).
[DVD-V]Shows a disc menu.
[DVD-VR]Press the button to show a 
play list (B19).
[VCD] with playback control
Shows a disc menu.
Return to 
previous 
screen
This unit 
display[DVD-VR] [DVD-V] [WMA] [MP3] [MPEG4] [DivX]Time display,-. Information display
(e.g. [DVD-VR] 
Program number)
[JPEG]
SLIDE,-.Contents number
OK
Select
Confirm
—
123
456
78
0
9
10
 TOP MENU
DIRECT NAVIGATOR
PLAYLIST
MENU
RETURN
RETURN—
-SLEEP
FL DISPLAY
SC-PT170-175EB-RQTX0246-B_eng.book  Page 17  Wednesday, February 4, 2009  3:20 PM
 
						

							18
RQTX0246
Getting Started Playing Discs Other Operations Reference
 
Other modes of play
This works only when the elapsed play time can be 
displayed. It also works with all JPEG content.
Items shown differ depending on the type of disc and 
playback mode.
Preparation
≥[DVD-VR] Select “DATA” in “DVD-VR/DATA” 
(B27, OTHERS menu) to play WMA, MP3, JPEG, 
MPEG4 or DivX contents.
≥If “PLAYBACK MENU” screen appears, select “AUDIO/
PICTURE” or “VIDEO” (B19, Using PLAYBACK 
MENU), then proceed with the above.
≥For a disc with both WMA/MP3 and JPEG contents, 
select either music or picture contents.
WMA/MP3: Select “MUSIC PROGRAM” or “MUSIC 
RANDOM”.
JPEG: Select “PICTURE PROGRAM” or “PICTURE 
RANDOM”.
≥[DVD-V] Some items cannot be played even if you have 
programmed them.
To select all the itemsPress [3,4] to select “ALL” and press [OK].
To clear the selected program1 Press [1] and then press [3,4] to select the 
program.
2 Press [CANCEL].
To clear the whole program
Press [1] several times to select “CLEAR ALL”, and then 
press [OK].
The whole program is also cleared when the disc tray is 
opened, the unit is turned off or another source is selected.
Repeat play
During play Select an item to be repeated.
e.g. [DVD-V]
`
TITLE --. `CHAP. --. `OFF
^-----------------------------------------------------b
To cancel, select “OFF”.
Program and Random play
[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] [MPEG4] [DivX]
While stopped Select the play mode.Program and random playback screens 
appear sequentially.
Program 
--------------------------------) Random^- Exit program and random screens (}
RETURN
PLAY
OK
CANCEL
PLAY MODE
REPEAT
OK
RETURN
CANCEL
PLAY
REPEAT
PLAY MODE
REPEAT
PLAY MODE
Program play (up to 30 items)
1Select an item.e.g. [DVD-V]
≥Repeat this step to program 
other items.
≥To return to the previous menu, 
press [RETURN].
2Start play.
Random play
1(Only when the disc has groups or 
multiple titles.)
Select a group or title.
e.g. 
[DVD-V]
≥“¢” represents selected. To 
deselect, press [OK] again.
2Start play.
OKDVD-V  PROGRAMSELECT TITLETITLE CHAPTER
TITLE  1
TITLE  2
TITLE  3
TITLE  41
2
3
4
5
6
7
8
9
10
START:PLAY
CLEAR ALL
PLAY
OK
DVD-V  RANDOM
SELECT  TITLE
PRESS PLAY TO STARTTITLE  1
TITLE  2
TITLE  3
PLAY
SC-PT170-175EB-RQTX0246-B_eng.book  Page 18  Wednesday, February 4, 2009  3:20 PM
 
						

							19
RQTX0246
Getting Started Playing Discs Other Operations Reference
 
Using navigation menus
[DVD-VR] Select “DATA” in “DVD-VR/DATA” (B27, 
OTHERS menu) to play WMA, MP3, JPEG, MPEG4 or DivX 
contents.
“PLAYBACK MENU” screen appears when the disc contains 
both video (MPEG4/DivX) and other format (WMA/MP3/
JPEG).
You can select to play from your desired item while the 
“DATA-DISC” screen is displayed.
e.g.
≥To display/exit the screen, press [MENU].
Play starts from the selected content.
∫Selecting the picture in Thumbnail menu
[JPEG]
To go to other group1 Press [3] to select the group name.
2 Press [2,1] to select the group and press [OK].
≥Titles appear only if the titles are recorded on the disc.
≥You cannot edit programs, play lists and disc titles.
This works only when the disc contains a play list.
Playing data discs
[WMA] [MP3] [JPEG] [MPEG4] [DivX]
Using PLAYBACK MENU
Select “AUDIO/PICTURE” or 
“VIDEO”.
≥To start play, press [1PLAY].
≥To select an item to play, refer 
“Playing from the selected item” 
(Bbelow).
Playing from the selected item
Select an item.
≥Press [2,1] to skip page by 
page.
≥To return to 1 level up from the 
current folder, press [RETURN].
≥Maximum: 28 characters for file/
folder name.
STOP
RETURN
SKIPSKIP
PLAY
OK TOP MENU
&+4%60#8+)#614
PLAYLISTMENU
,SKIP
OK
RETURNMENU, PLAY LIST
TOP MENU,
DIRECT 
NAVIGATOR
PLAY
OK
PLAYBACK  MENU
WMA/MP3/JPEG
MPEG4/DivXAUDIO/PICTURE
VIDEO
OK
DATA-DISC
ROOT
OK
RETURN Perfume
My favorite1
My favorite2
My favorite3
Underwater
Fantasy planet
Starpersons1
Starpersons2Group (Folder):
Content (File):
: WMA/MP3
: JPEG
: MPEG4/DivX
OK
1While picture is 
displayede.g.
2Select a picture.
≥Press [:,9SKIP] to skip 
page by page.
Playing RAM and DVD-R / -RW (DVD-VR) discs
[DVD-VR]
Playing the programs
1While stoppede.g.
≥To exit the screen, press 
[DIRECT NAVIGATOR].
2Select the program.
≥Press [2,1] to skip page by 
page.
Playing a play list
1While stoppede.g.
≥To exit the screen, press 
[PLAY LIST].
2Select the play list.≥Press [2,1] to skip page by 
page.
 TOP MENU
DIRECT NAVIGATOR
JPEG  images G  1/  1:C  3/  9
Group nameGroup and 
content number
OK
 TOP MENU
DIRECT NAVIGATORPG
DATELENGTH
TITLE
1
0:16:02 10/11
LIVE CONCERT
02:15
2
0:38:25 12/05
AUTO ACTION
3
1:16:05 04/03
CINEMA
02:10 01:30
OK
RETURN
OK
PLAYLIST
MENUPL
DATELENGTH
TITLE
1
0:00:10 11 / 11
CITY PENGUIN
00:01
2
0:01:20 12/01
FOOTBALL
3
1:10:04 01/02
SPECIAL
01:10 01:20
OK
RETURN
OK
SC-PT170-175EB-RQTX0246-B_eng.book  Page 19  Wednesday, February 4, 2009  3:20 PM
 
						

							20
RQTX0246
Getting Started Playing Discs Other Operations Reference
 
Using on-screen menus
1Show the on-screen 
menu.
Each time you press the 
button:
Menu 1 (Disc/Play)
Menu 2 (Video)
Menu 3 (Audio)
Menu 4 (HDMI)
Exit
2Select the item.
3Make the settings.
4Exit.
Items shown differ depending on the type of disc.
Menu 1 (Disc/Play)
TRACK SEARCH
TITLE SEARCH
CONTENT 
SEARCH
CHAPTER 
SEARCH
PG SEARCH
(Program 
Search)
PL SEARCH
(Playlist Search)To start from a specific item≥[VCD] This does not work when using 
playback control.
e.g. [DVD-V]: T2 C5
To select numbers for data disc
e.g. 123: [S10] B [1] B [2] B [3] B [OK]
RETURN
123
456
78
0
9
PLAY
OK
FUNCTIONS
10
CANCEL
OK
RETURN
FUNCTIONS
CANCEL
Numbered
buttons
PLAY
FUNCTIONS
T1C1
1:ENG
3/2.1
1 :EN OFF
TITLE  SEARCH
Current item
Item name
e.g. Menu 1 (Disc/Play) [DVD-V]
OKT1C1
1:ENG
3/2.
1 :E OFF
CHAPTER  SEARCH
Current settinge.g. Menu 1 (Disc/Play) [DVD-V]
OK
RETURN
AUDIO
[DVD-V] [DivX] (with multiple soundtracks)To select audio soundtrack
[DVD-VR] [VCD]To select “L”, “R”, “L+R” or “L R”
[DVD-V] (Karaoke disc)To select “ON” or “OFF” for vocals
To select “OFF”, “V1”, “V2” or 
“V1+V2” for vocal selections
Actual operations depend on the disc. 
Read the disc’s instructions for details.
Signal type/data
LPCM/PPCM/  D/DTS/MP3/
MPEG: Signal type
kHz (Sampling frequency)/bit/ch 
(Number of channels)
≥[DivX] It may take some time for play 
to start if you change the audio on a 
DivX video disc.
PLAY SPEED
[DVD-VR] [DVD-V]To change play speed
–from “k0.6” to “k1.4” (in 0.1-unit steps)
≥Press [1PLAY] to return to normal play.≥After you change the speed
– Dolby Pro Logic II has no effect.
– Audio output switches to 2-channel 
stereo.
– Sampling frequency of 96 kHz is 
converted to 48 kHz.
≥This function may not work 
depending on the disc’s recording.
REPEAT MODE
(B18, Repeat play)
A-B Repeat (To repeat a specified section)Except [JPEG] [MPEG4] [DivX] [DVD-VR] 
(Still picture part) 
[VCD] (SVCD)
Press [OK] at the starting and ending 
points.
≥Select “OFF” to cancel.
SUBTITLE
[DVD-V] [DivX] (with multiple subtitles)
[VCD] (SVCD only)To select subtitle language
≥On iR/iRW, a subtitle number may be 
shown for subtitles that are not displayed.
[DVD-VR] (with subtitle on/off information)To select “ON” or “OFF”
≥This may not work depending on the 
disc.
[DivX] 
(B28, Displaying DivX subtitles 
text)
ANGLE
[DVD-V] (with multiple angles)To select a video angle
DATE DISPLAY
[JPEG] To select “ON” or “OFF” for 
picture’s date display
3/2 .1ch
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right).1: Low frequency effect(not displayed if there is no signal)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront rightiCenter e.g.
JPGDATE
SC-PT170-175EB-RQTX0246-B_eng.book  Page 20  Wednesday, February 4, 2009  3:20 PM