Panasonic Sc Htx5 Operating Instructions

RQT9478
11
Home Theater connections
Connection

RQT9478
12
SPEAKERSSUBWOOFER
TV
TV OUT
OPTICAL 1 OPTICAL 2COAXIALTV AUX 2 AUX 3
BD/DVD IN AUX 1 AUX 4
AUDIO IN3 Ω4 ΩFRONT
R
R L
L
DIGITAL IN
Connecting equipment without HDMI terminal (DVD player, VCR, etc.)
Connection cable
TV
Digital audio 
out (optical)
Connect the video 
cable directly 
from the other 
equipment to the 
television. 
VIDEO IN AUDIO IN
Use this connection 
so audio from the 
equipment can 
be heard through 
the television’s 
speakers even if 
this system is in 
standby mode.
Video...

RQT9478
13
•  Turn off all equipment before making any connections.
•  To connect equipment, refer to the appropriate operating 
instructions.
Home Theater connections/AC mains supply connection
Connection
Other connections
Connection cable
HDMI cable (not included)Stereo phono cable (not included)
To connect a second set of equipment that supports HDMI
✽  See page 10 for connecting this system to TV.
TV
TV OUT
OPTICAL 1 OPTICAL 2COAXIALTV AUX 2 AUX 3
BD/DVD IN AUX 1 AUX 4
AUDIO IN
RLDIGITAL IN
Amplifi...

RQT9478
14
Connecting the wireless surround speakers
Connection
How to insert the digital transmitter
1  Press the dents on both sides with 
force.2  Remove the cover.3  Insert fi rmly with the label side (with 4 screws) 
facing front.
Digital 
transmitter 
(SH-FX70)Label Dent
•  Use care because the cover 
may pop out.
•  Turn off this system before making any connections.
•  To connect equipment, refer to the appropriate operating instructions.
Connecting the wireless surround speakers
The surround...

RQT9478
15
Checking speaker output
Check connections when the speaker does not output the test signal. (➜ page 5)
Note
Checking audio output with a test signal
Adjusting speaker (subwoofer, wireless surround speaker) output
Checking speaker output
Connection
1.  Press  to turn on the system.
2.  Press         to output the test signal.
Speaker display
 L : Front left, R : Front right, SUBW : Subwoofer, 
 RS : Wireless surround right, LS : Wireless surround left
• 
The test signal is output from one...

RQT9478
16
Play
Enjoying movies and music
Turn on the TV and switch its input to match the connection (HDMI, for example) using the TV’s 
remote control.
Enjoying movies and music
TV : TV
BD/DVD  : Blu-ray Disc player/DVD recorder
AUX 1  : AUX1 terminal
AUX 2  : AUX2 terminal
AUX 3  : AUX3 terminal
AUX 4  : AUX4 terminal

RQT9478
17
Enjoying movies and music
Enjoying sound fi eld effects
Play
Sound fi eld effects differ depending on input sources. 
Select the mode you prefer after listening to the actual 
sound.
Dolby Virtual Speaker
You can enjoy surround effects as if you were listening 
to 5.1 channel sources. (Dolby Pro Logic 
 also works for 
stereo signals of video, CD, etc.)

RQT9478
18
1.  You can select “Speaker Selection” (“Home Cinema” or “TV”).
When audio is input, this system will be automatically 
turned on if it is in standby✽ mode and the sound is 
output from this system’s speaker. You can also adjust 
the volume level by using the volume control buttons.
✽ “Standby” condition means the condition that this 
system is off.
TV (VIERA) speakers become active.
When using with the Panasonic TV (VIERA) 
supporting HDAVI Control 4 and later version, this 
system is...

RQT9478
19
Using the VIERA Link “HDAVI Control™”
Play
For correct use of VIERA Link “HDAVI Control”
Use TV (VIERA)’s remote control to select “Home Cinema” without turning 
on this system with this system’s standby/on button (including the remote 
control). (This system is automatically turned on.)
See TV (VIERA)’s operating instructions for details.
AC IN
SPEAKERSSUBWOOFERTV
TV OUTOPTICAL 1 OPTICAL 2COAXIALTV AUX 2 AUX 3
BD/DVD IN AUX 1 AUX 4AUDIO IN3 Ω4 ΩFRONT
R
R L
LDIGITAL IN
Set “VIERA Link “HDAVI...

RQT9478
20
Functions and settings
Using “WHISPER-MODE SURROUND”
This function is effective during surround playback only. You can enjoy the dynamic effect 
even if the sound volume level is low during surround playback.
Press [WHISPER-MODE SURROUND].
“W.S. ON ” is displayed.