Panasonic Sc Htb880 Owners Manual

							Getting started
Operations
RQT990321
Operations
Using this system
Preparation
≥Turn on the active subwoofer.
≥Turn on the TV and/or connected device.
Press [Í] to turn on the main unit.
Select the source.
≥This remote control cannot be used to control the 
operations of the connected devices.
∫When “BLUETOOTH” is selected as 
the source
On the Bluetooth® device:
Select this system as the output source of the 
connected Bluetooth
® device and start the 
playback.
∫When “BD/DVD” or “AUX” is selected 
as the source
On the TV and the connected device:
Select the TV’s input for this system and start the 
playback on the connected device.
∫To adjust the volume of this system
Press [iVOLj].≥Volume range: 0 to 100
∫To mute the sound
Press [MUTE].≥While muting, “MUTE” is indicated on the display.
≥To cancel, press the button again or adjust the volume.
≥Muting is canceled if the main unit is turned off.
	
≥If there is sound coming out of the TV’s speakers, reduce 
the volume of the TV to the minimum level.
PressTo select
[INPUT]
“TV” -# “BD/DVD” -# “AUX”^-------“BLUETOOTH”(--}
[]“BLUETOOTH”
SOUND 
INPUT
SETUP
OKIf this system does not operate as 
expected or sound is unusual, returning 
the settings to the factory defaults may 
solve the problem. (>p. 26)
SC-HTB880PP_RQT9903-Y.book  21 ページ  ２０１４年５月８日　木曜日　午後６時１３分 
						

							22RQT9903
3D sound
This system provides a feeling that the sound and 
the image are as one.
≥To change the applied effect, refer to “Sound 
menu”. (>right)
	≥Dolby Virtual Speaker effect is ON except in STEREO 
mode.
≥To turn off Dolby Virtual Speaker and the 3D surround 
effects, select “STEREO” as the sound mode. (>right)
≥To turn off the 3D surround and the Clear-mode dialog 
effects, refer to “3D CLR DIALOG”. (>p. 23)
Sound menu
Press [SOUND] repeatedly to select 
the sound effect.
Press [3,4] repeatedly to select 
the desired setting and then press 
[OK].
3D sound
Dolby
® Virtual 
SpeakerWith this effect you can enjoy 
a Surround Sound effect 
similar to 5.1ch.
3D surround 
effectAdding to the Dolby Virtual 
Speaker effect, Panasonic 
has applied its own sound 
field controlling technology to 
expand the sound field 
forwards, backwards, 
upwards, and downwards, 
providing a sound with depth 
and force that better matches 
3D images.
Clear-mode 
dialogSports commentary and 
dialogs from TV dramas are 
heard as if the sound is 
coming from the TV, giving 
the feeling that the sound and 
the image are one.
Also, the dialog will stand out 
from the other sounds during 
normal volume playback and 
when the volume is lowered 
for night time viewing.
e.g., Image of 3D sound field
SOUND 
MODESTANDARD
: Best suited 
for dramas and comedy 
shows.
STADIUM: Produces a 
realistic sound for live 
sports broadcasts.
MUSIC: Enhances the 
sound of musical 
instruments and songs.
CINEMA: Produces three-
dimensional sound unique 
to movies.
NEWS: Enhances the 
voice of news and sports 
commentaries.
STEREO: Plays any 
source of sound in stereo.
SUBWOOFER
You can adjust the amount 
of bass. This system 
automatically selects the 
most suitable setting 
according to the type of 
playback source.
LEVEL 1
LEVEL 2
: Default for 
2 channel audio source
LEVEL 3
: Default for multi-
channel audio source
LEVEL 4
The setting you make is 
retained and recalled every 
time you play the same 
type of source.
DIALOG
Adjusts the dialog level.
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
“DIALOG” is not indicated 
on the display when “3D 
CLR DIALOG” is set to 
“OFF”.
SC-HTB880PP_RQT9903-Y.book  22 ページ  ２０１４年５月８日　木曜日　午後６時１３分 
						

							Operations
RQT990323
	≥The default setting is underlined. Changed settings will be 
kept until it is changed again, unless otherwise indicated.
You can view the current audio format.
Press and hold [SOUND] for more than 4 sec.H.BASSEnhances the harmonic 
bass effect.
ON
OFF
3D CLR 
DIALOG
The 3D Clear Mode Dialog 
feature creates a sound field 
similar to the sound coming 
from a TV screen and 
makes dialogues clearer.
ON: 3D Surround, Clear 
Mode Dialog and Dolby 
Virtual Speaker effect
OFF: Dolby Virtual 
Speaker effect
The setting is set back to 
“ON” every time you turn 
the main unit on.
DUAL 
AUDIOSets the preferred audio 
channel mode when there 
are two audio modes 
received by this system.
MAIN
: Main
SAP: Secondary
MAIN + SAP: Main + 
Secondary
This effect only works if the 
audio output of the TV or 
player is set to “Bitstream” 
and “Dolby Dual Mono” is 
available in the sound source.
AGC
Auto gain control prevents 
sudden loud sound by reducing 
the sound level automatically 
when the input is too high.
This function is suitable for 
a TV broadcast that has 
sound level difference.
ON
OFF
If the sound becomes 
unnatural, select “OFF”.
LOW VOL 
MODEEnhances the dialogue in 
low volume condition.
ONOFF
Select “OFF” to cancel this 
effect if the dialogue does 
not sound natural in low 
volume condition.
Audio format
DOLBY 
DIGITALDolby Digital is the audio 
source.
DTSDTS is the audio source.
PCM MULTILinear pulse-code 
modulation is the audio 
source.
PCM2 channel pulse-code 
modulation is the audio 
source.
SC-HTB880PP_RQT9903-Y.book  23 ページ  ２０１４年５月８日　木曜日　午後６時１３分 
						

							24RQT9903
Setup menu
Press [SETUP] repeatedly to select 
the setup item.
Press [3,4] repeatedly to select 
the desired setting and then press 
[OK].
	≥The default setting is underlined. Changed settings will be 
kept until it is changed again, unless otherwise indicated.
DIMMERDims the display after 
5 seconds of inactivity.
ON
OFF
AUTO 
POWER 
DOWNThe main unit is 
automatically turned off if 
there is no audio input and 
when you do not use it for 
approximately 20 minutes.
ON
OFF
VOL 
LIMITATION
Sets the volume limit to 50 
when you turn on the main 
unit although the volume is 
set to above 50 before it is 
turned off.
ON
OFF
BLUETOOTH 
STANDBY
This function allows you to 
connect a paired 
Bluetooth
® device when 
the main unit is in standby 
mode.
ON
OFF
The main unit will be 
turned on automatically 
when you connect a paired 
Bluetooth
® device.
LINK 
MODEChange the Bluetooth
® 
connection link mode to 
suit the connection type. 
Make sure that the 
Bluetooth
® device is not 
connected (“PAIRING” or 
“BLUETOOTH READY” is 
indicated on the display).
MODE 1: Emphasis on 
connectivity.
MODE 2
: Emphasis on 
sound quality.
VIERA 
LINKTurn on the VIERA Link 
function.
ON
OFF
Select “OFF” when your 
HDAVI Control device does 
not work correctly with this 
system. ARC will be 
disabled. Connect an 
optical digital audio cable. 
Turn off all connected 
devices and then turn them 
on again after changing the 
setting.
SPEAKER 
PLACEMENT
Select the appropriate 
speaker placement mode 
to suit your placement 
method. This system will 
adjust the sound effect 
according to the placement 
mode setting.
ON TABLE-AUTO
 or ON WALL-A UTO: Setting will
be automatically changed
depending on the 
placement method.
ON TABLE: For table top 
layout
ON WALL: For wall 
mounting layout
SC-HTB880PP_RQT9903-Y.book  24 ページ  ２０１４年５月８日　木曜日　午後６時１３分 
						

							Operations
RQT990325
Linked operations with the TV 
(VIERA Link
TM “HDAVI ControlTM”)
Preparation
1Confirm that the HDMI connection has been 
made. (>p. 9, 10)
2Set the “HDAVI Control” operations on the 
connected equipment (e.g., TV).
3For the optimal “HDAVI Control” operations 
change the following settings on the 
connected TV
§1.≥Set the default speaker settings to this system.§2
≥Set the speaker selection settings to this system.4Turn on all “HDAVI Control” compatible 
equipment and select the TV’s input for this 
system so that the “HDAVI Control” function 
works properly.
5If a device is connected to the HDMI AV IN1 
or HDMI AV IN2 terminal, start play to check 
that the picture is displayed on the TV 
correctly.
When the connection or settings are changed, 
repeat this procedure.
§1 The availability and function of the settings may vary 
depending on the TV. Refer to the operating instructions 
for the TV for details.
§2 If the TV has a default speaker setting within the VIERA 
Link setting items, choosing this system as the default 
speaker will automatically change the speaker selection 
to this system.
	≥VIERA Link “HDAVI Control”, based on the control 
functions provided by HDMI which is an industry standard 
known as HDMI CEC (Consumer Electronics Control), is a 
unique function that we have developed and added. As 
such, its operation with other manufacturers’ equipment 
that supports HDMI CEC cannot be guaranteed.
≥This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the standard for Panasonic’s HDAVI 
Control compatible equipment. This standard is compatible 
with Panasonic’s conventional HDAVI equipment.
≥Please refer to individual manuals for other manufacturers’ 
equipment supporting VIERA Link function.
To make sure that the audio is output from this 
system, turn the main unit on by using the TV’s 
remote control and selecting home theater from 
the speaker menu of VIERA Link menu.
The availability and function of the settings may 
vary depending on the TV. Refer to the operating 
instructions for the TV for details.
∫Speaker control
You can select whether audio output is from this system 
or the TV speakers by using the TV menu settings.
Home theater
This system is active.
≥When the main unit is in standby mode, changing the TV 
speakers to this system in the VIERA Link menu will 
automatically turn the main unit on.
≥You can control the volume setting of this system using the 
volume or mute button on the TV remote control.
≥If you turn off the main unit, TV speakers will be 
automatically activated.
≥Audio will automatically be output from this system if the TV 
is compatible to VIERA Link “HDAVI Control 4” or later.
TV
TV speakers are active.
≥The volume of this system is set to its minimum.
∫Automatic input switching
When the following operations are performed, the 
main unit will automatically change the input to 
the corresponding source.
j
When play starts on an HDMI connected device.§3
jWhen the TV input or the TV channel is changed.
§3 If the speaker output setting on the TV is set to this 
system, the TV and the main unit turn on automatically 
(Power on link).
∫Power off link
When the TV is turned off, the main unit also turns 
off automatically. (This function does not work 
when Bluetooth
® is the source.)
∫Automatic lip-sync function 
(for HDAVI Control 3 or later)
Delay between audio and video is automatically 
adjusted by adding time-lag to the audio output, 
enabling you to enjoy smooth audio for the picture.
	The delay information is automatically set if the TV is 
compatible to VIERA Link “HDAVI Control 3” or later and the 
VIERA Link is set to on.
What is VIERA Link “HDAVI 
Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient 
function that offers linked operations of this 
system, and a Panasonic TV (VIERA) under 
“HDAVI Control”.
You can use this function by connecting the 
equipment with an HDMI cable. See the 
operating instructions for connected 
equipment for operational details.
What you can do with 
VIERA Link “HDAVI Control”
SC-HTB880PP_RQT9903-Y.book  25 ページ  ２０１４年５月８日　木曜日　午後６時１３分 
						

							26RQT9903
Referenc e
Troubleshooting
Before requesting service, make the following checks. 
If you are in doubt about some of the check points, or 
if the solutions indicated in the following guide do not 
solve the problem, refer to “Customer Services 
Directory (United States)” on page 32 if you reside in 
the U.S.A. or refer to “Limited Warranty (ONLY FOR 
CANADA)” on page 33 if you reside in Canada.
No power.
≥Unplug the AC power supply cord for 10 sec 
before plug in again.
≥After turning the main unit on, if the main unit 
immediately turns off, unplug the AC power 
supply cord and consult your dealer.
≥
If the main unit does not turn on by turning on TV 
(HDAVI control), manually turn on the main unit. 
If the problem persists, refer to “HDMI” in 
“Troubleshooting”.
The remote control does not work properly.
≥The battery is dead. Replace the battery with a 
new one. (>p. 8)
≥
It is possible that the insulation sheet has not been 
removed. Remove the insulation sheet. (>p. 8)
≥It may be necessary to set the code of the 
remote control again after changing the battery 
of the remote control. (>p. 20)
≥Use the remote control within the correct 
operation range. (>p. 8)
The main unit is automatically switched to 
standby mode.
“AUTO POWER DOWN” function is on.
The main unit will automatically switch to standby 
mode when no signal is input and no operation is 
performed for approximately 20 minutes. Refer to 
page 24 to turn this function off.
The main unit is turned off when the TV’s 
speakers are selected in the speaker control.
This is a normal feature when using VIERA Link 
(HDAVI Control 4 or later). Please read the 
operating instructions for the TV for details about 
its power save feature. (>p. 25)
The switches on the main unit do not work.
[Í/I], [jVOLi], [INPUT], and [ ] on the main 
unit are touch keys. Touch the switches with your 
finger. They may not work if operated with your 
fingernails or hands wearing gloves.
This system does not operate correctly.
If the HDMI cable is connected to the wrong 
terminal (HDMI AV IN1, HDMI AV IN2 or HDMI AV 
OUT), this system will not operate correctly. Turn 
the main unit off, disconnect the AC power supply 
cord and reconnect the HDMI cable(s). (
>p. 9, 10)
VIERA Link related operations no longer 
function properly.
≥
Check the VIERA Link setting on the connected devices.
jTurn on VIERA Link function on the 
connected devices.
jSelect this system as the speaker in the TVs 
VIERA Link menu.
≥
Check if the VIERA Link settings are off. (>p. 24)≥When the HDMI connections are changed, after a power 
failure or after the AC power supply cord has been 
removed, VIERA Link operations may not function properly.
jTurn on all the devices that are connected to the 
TV with an HDMI cable and then turn the TV on.
jTurn off the VIERA Link settings of the TV and 
turn it on again. For details refer to the 
operating instructions for the TV.
jWhile the main unit and the TV are connected 
with the HDMI cable, turn on the TV and then 
remove the main unit’s AC power supply cord 
and reconnect it again.
The first few seconds of audio cannot be 
heard when using the HDMI connection.
This may occur during DVD-Video chapter 
playback. Change the digital audio output setting on 
the connected device from “Bitstream” to “PCM”.
When operating an HDMI compatible device of a different 
brand, the main unit reacts in an unwanted manner.
HDAVI Control commands may use a different 
signal depending on the brand of the device. In 
this case, turn VIERA Link off. (>p. 24)
To return to the factory defaults.
While the main unit is on, touch and hold [Í/I] on 
the main unit for more than 4 sec.
(“RESET” is indicated on the display when this 
system is reset.)
If this system does not operate as expected, returning the 
settings to the factory defaults may solve the problem.
≥The remote control code will return to 
“REMOTE 1” when this system is returned to 
the factory preset. To change the remote 
control code, refer to page 20.
General operation
HDMI
SC-HTB880PP_RQT9903-Y.book  26 ページ  ２０１４年５月８日　木曜日　午後６時１３分 
						

							Reference
RQT990327
When the main unit is turned on or off, audio 
and video are temporarily disabled
When the main unit is turned on or off it is normal for 
the audio and video to be temporarily disabled. This is 
not a malfunction. This can occur when the device it is 
connected to, via HDMI, does not support Panasonic’s 
VIERA Link feature (HDAVI Control 3 or later).
The images from this system do not appear on 
the TV.
When outputting in 60p (4K), images may be 
distorted depending on the HDMI cable. Use High 
Speed HDMI cables which support 18 Gbps 
bandwidth.
Pairing cannot be done.
Check the Bluetooth
® device condition.
The device cannot be connected.
≥The pairing of the device was unsuccessful or 
the registration has been replaced. Try pairing 
the device again. (>p. 19)
≥This system might be connected to a different 
device. Disconnect the other device and try 
pairing the device again.
The device is connected but audio cannot be 
heard through this system.
For some built-in Bluetooth® devices, you have to set 
the audio output to “SC-HTB880” manually. Read the 
operating instructions for the device for details.
The sound is interrupted.
≥The device is out of the 10 m (33 ft) 
communication range. Bring the Bluetooth
® 
device closer to the main unit.
≥Remove any obstacle between the main unit 
and the device.
≥Other devices that use the 2.4 GHz frequency 
band (wireless router, microwaves, cordless 
phones, etc.) are interfering. Bring the 
Bluetooth
® device closer to the main unit and 
distance it from the other devices.
≥Select “MODE1” for stable communication. 
(>p. 24)
The One-Touch Connection (NFC feature) is 
not working.
Make sure the main unit and the NFC feature of 
the device are turned on. (>p. 20)No sound (or image).
≥Turn mute off. (>p. 21)
≥Check the connections to the other devices. 
(>p. 9, 10)
≥Make sure that the received audio signal is 
compatible with this system. (>p. 30)
≥Turn this system off and then on again.
≥If the main unit is connected to the TV with only 
an HDMI cable, make sure that the TV’s HDMI 
terminal is labeled “HDMI (ARC)”. If not, 
connect using the optical digital audio cable. 
(>p. 9, 10)
≥If the main unit is connected to a Panasonic TV 
and turned on using the remote control or the 
touch key on the main unit, sound might not be 
output from this system. In this case, turn the 
main unit on using the TV’s remote control. 
(>p. 25)
≥If the connections are correct, there might be a 
problem with the cables. Redo the connections 
with different cables.
≥Check the audio output settings on the 
connected device.
The dual audio cannot be changed from main 
to secondary.
If the audio received from the connected device is 
not “Dolby Dual Mono” or the output setting is not 
“Bitstream”, the setting cannot be changed from 
this system. Change the setting on the connected 
device.
The volume is lowered when the main unit is 
turned on.
“VOL LIMITATION” is on.
If the main unit is turned off with the volume 
setting in the greater half (above 50), the main 
unit will automatically lower the volume to the 
middle (50) when the main unit is turned on. 
(>p. 24)
The dialogue is too persistent or the dialogue 
does not sound natural.
This system has a function to make the dialogue 
stand out when the volume is low. (>p. 23)
Bluetooth®
Sound
SC-HTB880PP_RQT9903-Y.book  27 ページ  ２０１４年５月８日　木曜日　午後６時１３分 
						

							28RQT9903
Cannot hear the surround sound effect of a 
5.1-channel surround source.
≥Ensure “STEREO” is not selected as the sound 
mode.(>p. 22)
≥Speaker output varies depending on the source. 
The surround sound may be subtle depending 
on how the program or disc was recorded/
encoded. This is not a malfunction.
There is no audio.
The power of the main unit turns off 
automatically.
(When the main unit detects a problem, a safety 
measure is activated and the main unit 
automatically switches to standby mode.)
≥There is a problem with the amplifier.
≥Check to see if the volume is really loud.
If so, lower the volume.
≥Check to see if this system is placed in an 
extremely hot area.
If so, move this system to a cooler place and 
wait a few moments and then try to turn it on 
again.
If the problem persists, confirm the display, turn 
this system off, remove the AC power supply cord 
and consult your dealer. Please be sure to 
remember the display that was indicated and 
inform the dealer.
“F61”
≥There is a problem with the amplifier of the 
system.
≥Disconnect the AC power supply cord and 
consult the dealer.
“F70 HDMI”
≥Check HDMI connection.
≥Turn off the main unit and then switch it on 
again.
≥Disconnect the HDMI cable.
“F76”
≥There is a problem with the power supply.
≥Disconnect the AC power supply cord and 
consult the dealer.No power.
Ensure the AC power supply cord of the active 
subwoofer is connected properly.
After turning the subwoofer on, it immediately 
turns off.
Unplug the AC power supply cord and consult 
your dealer.
No sound from the subwoofer.
≥Check that the active subwoofer is turned on.
≥Check that the WIRELESS LINK indicator lights 
green. (>p. 19)
The WIRELESS LINK indicator lights red.
≥There is no link between the main unit and the 
active subwoofer.
jCheck that the main unit is turned on.
jTurn the active subwoofer off and then back 
on. Alternatively, turn the active subwoofer off, 
disconnect the AC power supply cord and 
then reconnect it.
≥The active subwoofer and the main unit may not 
be paired correctly. Try the following operation. 
(Wireless pairing)
1Turn on the main unit and active subwoofer.
2Press and hold [ID SET] on the rear of the 
active subwoofer for more than 3 sec. 
(The WIRELESS LINK indicator will blink in 
red.)
3While pressing and holding [INPUT] on 
remote control, touch and hold [VOLi] on 
the main unit for more than 4 sec. 
(“SUBWOOFER PAIRING” will be indicated 
on the display.)
≥When the wireless pairing is successful, “PAIRED” 
will be indicated on the display for 2 sec and 
WIRELESS LINK indicator lights green.
4Turn the main unit off and on.
≥Consult your dealer if the problem persists.
Main unit displays
Active Subwoofer
SC-HTB880PP_RQT9903-Y.book  28 ページ  ２０１４年５月８日　木曜日　午後６時１３分 
						

							Reference
RQT990329
About Bluetooth®
∫Frequency band used
This system uses the 2.4 GHz frequency band.
∫Certification of this device
≥This system conforms to frequency restrictions 
and has received certification based on 
frequency laws. Thus, a wireless permit is not 
necessary.
≥The action below are punishable by law in some 
countries:
jTaking apart or modifying the unit.
jRemoving specification indications.
∫Restrictions of use
≥Wireless transmission and/or usage with all 
Bluetooth® equipped devices is not guaranteed.
≥All devices must conform to standards set by 
Bluetooth SIG, Inc.
≥Depending on the specifications and settings of 
a device, it can fail to connect or some 
operations can be different.
≥This system supports Bluetooth
® security 
features. But depending on the operating 
environment and/or settings, this security is 
possibly not sufficient. Transmit data wirelessly 
to this system with caution.
≥This system cannot transmit data to a 
Bluetooth
® device.
∫Range of use
Use this device at a maximum range of 10 m (33 ft).The range can decrease depending on the 
environment, obstacles or interference.
∫Interference from other devices
≥This system may not function properly and 
troubles such as noise and sound jumps may 
arise due to radio wave interference if the main 
unit is located too close to other Bluetooth
® 
devices or the devices that use the 2.4 GHz 
band.
≥This system may not function properly if radio 
waves from a nearby broadcasting station, etc. 
are too strong.
∫Intended usage
≥This system is for normal, general use only.
≥Do not use this system near equipment or in an 
environment that is sensitive to radio frequency 
interference (example: airports, hospitals, 
laboratories, etc.).
Unit care
∫Clean this system with a soft, dry 
cloth
≥When dirt is heavy, wring a cloth moistened in 
water tightly to wipe the dirt, and then wipe it 
with a dry cloth.
≥When cleaning the speakers, use a fine cloth. 
Do not use tissues or other materials (towels, 
etc.) that can fall apart. Small grains may get 
stuck inside the speaker cover.
≥Never use alcohol, paint thinner or benzine to 
clean this system.
≥Before using chemically-treated cloth, carefully 
read the instructions that came with the cloth.
∫To dispose or transfer this system
This system may keep the user settings 
information in the main unit. If you discard the 
main unit either by disposal or transfer, then follow 
the procedure to return all the settings to the 
factory defaults to delete the user settings. 
(>p. 26, “To return to the factory defaults.”)
≥The operation history may be recorded in the 
memory of the main unit.
Licenses
Panasonic bears no responsibility for data 
and/or information that is compromised 
during a wireless transmission.
Manufactured under license from Dolby Laboratories. 
Dolby, Pro Logic, and the double-D symbol are 
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 
5,956,674; 5,974,380; 6,487,535 & other U.S. and 
worldwide patents issued & pending.
DTS, the Symbol, & DTS and the Symbol together are 
registered trademarks & DTS Digital Surround and the 
DTS logos are trademarks of DTS, Inc. Product includes 
software.
© DTS, Inc. All Rights Reserved.
HDMI, the HDMI Logo, and High-Definition Multimedia 
Interface are trademarks or registered trademarks of 
HDMI Licensing LLC in the United States and other 
countries.
HDAVI Control™ is a trademark of Panasonic 
Corporation.
VIERA Link™ is a trademark of Panasonic Corporation.
EZ Sync™ is a trademark of Panasonic Corporation.
The Bluetooth
® word mark and logos are owned by the 
Bluetooth SIG, Inc. and any use of such marks by 
Panasonic Corporation is under license. Other trademarks 
and trade names are those of their respective owners.
Google Play and Android are trademarks of Google Inc.
aptX
® software is copyright CSR plc or its group 
companies. All rights reserved.
The aptX
® mark and the aptX logo are trademarks of CSR 
plc or one of its group companies and may be registered 
in one or more jurisdictions.
SC-HTB880PP_RQT9903-Y.book  29 ページ  ２０１４年５月８日　木曜日　午後６時１３分 
						

							30RQT9903
Specifications
AMPLIFIER SECTION
RMS output power: Dolby Digital Mode
Front ch (L, R ch)
50 W per channel (6≠), 1 kHz, 10 % THD
Center ch (C ch)
50 W per channel (6≠), 1 kHz, 10 % THD
Surround ch (L, R ch)
50 W per channel (6≠), 1 kHz, 10 % THD
Subwoofer ch
250 W per channel (8≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power
500 W
FTC output power: Dolby Digital Mode
Front ch (L, R ch)
30 W per channel (6≠), 120 Hz to 20 kHz, 1 % THDCenter ch (C ch)
30 W per channel (6≠), 120 Hz to 20 kHz, 1 % THDSurround ch (L, R ch)30 W per channel (6≠), 120 Hz to 20 kHz, 1 % THD
Subwoofer ch95 W per channel (8≠), 40 Hz to 200 Hz, 1 % THDTotal FTC Dolby Digital mode power
245 W
TERMINAL SECTION
HDAVI Control
This unit supports “HDAVI Control 5” function.
HDMI AV input (BD/DVD, AUX)
2
Input connector
Type A (19 pin)
HDMI AV output (TV (ARC))
1
Output connector
Type A (19 pin)
Digital audio input (TV)
Optical digital input
Optical terminal
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
88.2 kHz, 96 kHz (only LPCM)
Audio format
LPCM, Dolby Digital, DTS Digital Surround
IR Blaster
Te r m i n a l  Ty p e
3.5 mm (
1/8q) jack
USB Port
For service use only.
GENERAL
Power consumption
Main unit
 31 W
Active subwoofer
46 W
In standby condition
Main unit (When the other connected devices 
are turned off)
Approx. 0.4 W
Active subwoofer (Power switch release)
Approx. 0.2 W
Power supply
AC 120 V, 60 Hz
Dimensions (WkHkD)
Main unit
For table top layout
1125 mmk51 mmk121 mm
(44
9/32qk2qk43/4q)
For wall mounting layout
1125 mmk122.5 mmk56.5 mm
(44
9/32qk413/16qk27/32q)
Active subwoofer
180 mmk408 mmk306 mm
(7
3/32qk161/16qk121/16q)
Mass (Weight)
Main unit
For table top layout
Approx. 3.1 kg (6.8 lbs)
For wall mounting layout
Approx. 3.2 kg (7.1 lbs)
Active subwoofer
Approx. 5.4 kg (11.9 lbs)
Operating temperature range
0
oC to i40oC (r32oF to r104oF)
Operating humidity range
20 % to 80 % RH (no condensation)
SC-HTB880PP_RQT9903-Y.book  30 ページ  ２０１４年５月８日　木曜日　午後６時１３分