Panasonic Sc Htb770 Quick Start Guide
Have a look at the manual Panasonic Sc Htb770 Quick Start Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
RQCA2105-1 Quick Start GuideHome Theater Audio System SC-HTB770 Step 1: Choose the configuration that is right for you Place the speakers horizontally Place the front speakers vertically Fully insert the wire. r: White s: Blue line RedWhite To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Push Green Press into the groove.≥Tighten screws securely. 1Fully insert the wire. r: White s: Blue line Push Speaker placement Speaker with, Red connector: To the right White connector: To the left Green connector: In the center To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Push Green ≥Tighten screws securely. Press the cable into the groove.Press the cable into the groove. Red or White If you have any questions, contact: U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Mon-Fri: 9 ams9 pm (EST) Lunes-Viernes Sat-Sun: 10 ams7 pm (EST) Sabado-Domingo www.Panasonic.com/helpCanada: Telephone: 1-800-561-5505 SC-HTB770PPC_RQCA2105_mst.fm Page 5 Friday, January 25, 2013 8:43 PM
HDMI (ARC) Audio Return Channel: Allows a home theater system to receive and play audio from the TV through a HDMI cable without additional wiring. HDMI cable is required for VIERA Link “HDAVI Control”. Turn on the active subwoofer. On the TV, select this home theater system as the TV’s speakers from the VIERA Link menu. Press [iVOLj] on the TV’s remote control to adjust the volume. § Operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed. Turn on the main unit, active subwoofer and the TV. Press [INPUT SELECTOR] to select the TV sound. Press [iVOLj] to adjust the volume. Step 2: Connect the cables Do not connect the AC power supply cord to the main unit and the active subwoofer until all other connections are completed. When the TV is HDMI (ARC) compatibleWhen the TV is non HDMI (ARC) compatible AC IN DIGITAL AUDIO IN SPEAKERS/HAUT-PARLEURS666RLCENTER TV (ARC)AV OUTTV (ARC)AV OUT HDMI IN (ARC) TV Main unit HDMI cable Be sure to connect to the TV’s ARC compatible terminal. (Refer to the TV’s operating instructions.) Red White Green AC IN DIGITAL AUDIO INTV(OPT1) SPEAKERS/HAUT-PARLEURS666RLCENTER TV (ARC)AV OUTTV (ARC)AV OUT DIGITAL AUDIO INTV(OPT1) HDMI INOPTICAL OUT TV Main unit HDMI cable Optical digital audio cable Red White Green Using this system When the TV is VIERA Link TM “HDAVI Control TM ” or HDMI CEC compatible ≥If the TV is not a Panasonic TV, set the “Receiver” or “External speakers” to “On”.When the TV is not VIERA Link TM “HDAVI Control TM ” or HDMI CEC compatible ≥If there is sound from the TV’s speakers too, then use the TV’s remote control to lower the volume to minimum.For wall mounting and other details, be sure to refer to the Owner’s Manual. e.g. TV remote control INPUT SELECTOR e.g. TV remote control SC-HTB770PPC_RQCA2105_mst.fm Page 6 Friday, January 25, 2013 8:43 PM