Panasonic Sc Htb520 Owners Manual

Precautions
Getting started
11
1Use the measurements indicated below to identify the screwing positions on 
the wall.
≥Position the unit with at least 50 mm (2 q) of space above the unit. If not, it may not be possible to access the buttons on this unit.
2Attach the wall mount brackets to the wall.≥The position in the wall where the screw is to be attached as well as the screw should be capable of supporting over 33 k g 
(72.8 lbs).
≥ Be sure to use a spirit level to ensure that both screwing positions...

12
6Adjust the safety holder with the cord attached (>11), to fit the projecting 
parts and screw the safety holder firmly into place.
≥ Screw tightening torque: 80 N 0cm (17.98 lbf-ft) to 120 N0cm (26.98 lbf-ft).
≥ The safety holder is to minimize the possibility of damage and harm, but it does not guarantee this effect.
≥ Keep the safety holders out of reach of children to prevent swallowing.
≥ Keep the screws out of reach of children to prevent swallowing.
7Attach this unit to the wall mount bracket....

Getting started
Precautions
13
PreparationCommercially available components (not supplied)
≥Fall prevention cord ............................................................................................................................ k 2
≥Screws to attach fall prevention cord to wall ...................................................................................... k 2
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
	≥Do not hold this unit in one hand to...

14
1Attach a cord (not supplied) to 2 safety holders.≥Keep the safety holders out of reach of children to prevent swallowing.
≥ Keep the remaining 2 safety holders for later use.
2Adjust the safety holder with the cord attached ( >above), to fit the 
projecting parts and screw the safety holder firmly into place.
≥ Screw tightening torque: 80 N 0cm (17.98 lbf-ft) to 120 N0cm (26.98 lbf-ft).
≥ The safety holder is to minimize the possibility of damage and harm, but it does not guarantee this effect.
≥...

Getting started
15
≥Turn off all equipment before connection and read the appropriate Owner’s Manuals.
Do not connect the AC power supply cord until all other connections are complete.
AHDMI cable (not supplied)
§Be sure to connect to the TV’s ARC compatible terminal. 
(Refer to the Owner’s Manual for the TV.)
	
≥If the connected TV is ARC compatible, but audio is not 
output to this unit, connect using the optical digital audio 
cable. (>right, “B Not labeled “HDMI (ARC)””)
AHDMI cable (not supplied)...

16
You can output the audio signal from the connected HDMI compatible Blu-ray player, DVD player, etc. with 
this unit and pass the signal through to your TV.
Preparation≥Connect this unit to the TV. (>15)
AE.g., Blu-ray Disc PlayerBHDMI cable (not supplied)
	≥Refer to the Owner’s Manual of the connected HDMI compatible device for the necessary setting, to output the video and audio 
signals.
ADigital transmitter (supplied)
Insert the digital transmitter, with the label facing down, until you hear a...

Getting started
17
≥Connect only after all other connections are complete.
≥This system consumes a small amount of AC power, even when it is turned off (this unit; approx. 0.18 W, 
the active subwoofer; approx. 0.07 W). In the interest of power conservation, if you will not be using this 
system for a long time, unplug it from the household AC outlet.
≥The supplied AC power supply cord is for use with this unit and the active subwoofer only.
Do not use it with other equipment. Also, do not use cords for...

18
Using this unit
Preparation≥Turn on the TV.
1Press [Í] to turn on this unit.
2Press [B Í, C I POWER] on the 
active subwoofer to turn it on.
≥Make sure the wireless link indicator lights 
green. (>17)
3Press [TV] or [BD/DVD] to select 
the audio source. (>6)
≥If you have selected [BD/DVD], make sure to 
select the TV’s input channel for this unit and 
start the playback.
	≥If there is sound coming out of the TV’s speakers, reduce the 
volume of the TV to it’s minimum.
≥The maximum volume of the TV and...

Operations
19
This unit provides a feeling that the sound and the image are as 
one.
∫ 3D Surround
Even though there are no surround speakers, a surround effect 
is obtained by the use of Dolby Vi rtual Speaker. Adding to this 
effect, Panasonic has applied it’s own sound field controlling 
technology to expand the sound  field forwards, backwards, 
upwards and downwards providing a sound with depth and 
force that better matches 3D images.
∫ Clear-mode Dialog
Sports commentary and dialogs from  TV...

20
Linked operations with the TV
(VIERA LinkTM “HDAVI ControlTM”)
Preparation
1Confirm that the HDMI connection has been 
made. (>15, 16)
2Set the “HDAVI Control” operations on the 
connected equipment (e.g., TV).
3For the optimal “HDAVI Control” operations 
change the following settings on the connected 
TV
§1.
≥Set the default speaker settings to this unit.§2
≥Set the speaker selection settings to this unit.
4Turn on all “HDAVI Control” compatible 
equipment and select this unit’s input channel 
on the...