Panasonic Sc Htb351 Owners Manual

Getting started
RQT967021
Preparation≥Turn on the main unit.
Press [ BÍ CI].
Check that the wireless link is 
activated.
WIRELESS LINK indicator lights
≥ Red:
The wireless link is not activated.
≥ Green:
The wireless link is activated.
The unit will still consum e a small amount of power 
even when it is turned off ( B, Í) With the Bluetooth
® connection you can output the 
audio from the connected wireless device.
Preparation≥ Turn on the Bluetooth® feature of the device and 
place the device near this...

22RQT9670
OperationsUsing this unit
Preparation≥Turn on the TV and/or connected device.
Press [ Í] to turn on the main unit.
Select the source.
≥ This remote control cannot be used to control the operations 
of the connected devices.
∫ When “ ” is selected as the source
On the Bluetooth® device:Select this unit as the output source of the Bluetooth® 
device and start the playback.
≥ Make sure that the Bluetooth® device is already paired with 
this unit. (> 21)
≥ Playback may pause when a different source...

Operations
RQT967023
This system provides a feeling that the sound and the 
image are as one. The 3D sound effect will be applied to 
Multi-channel audio sources as a factory preset.
	Dolby Virtual Speaker and the 3D surround effects can be 
turned off and on by changing the audio output mode settings.
As a factory preset, Dolby Virtual Speaker and the 3D 
surround effects will be applied to Multi-channel audio 
sources, such as those from a Blu-ray Disc player
TM or 
DVD player, etc.
By changing the...

24RQT9670
Advanced operations
Change the dual audio from main to secondary.
Confirm the digital audio output 
setting on the connected TV or 
player, etc. is set to “Bitstream”.
Press and hold [TV] for more than 2 
sec.
While the indicator of the current 
setting is blinking , press [TV] to 
change the setting.
≥ The indicator for the current setting blinks for 10 sec.
≥ The setting works only when the dual audio is available 
in the audio source.
≥ The setting is maintained until it is changed again.
≥...

Operations
RQT967025
∫Remote control code
When other Panasonic devices respond to this system’s 
remote control, change the remote control code on the 
main unit and the remote control.
Preparation≥Turn off all other Panasonic products.
≥ Turn on the main unit.
Change the remote control code to code 2:
1 Aim the remote control at this system’s remote 
control sensor.
2 Press and hold [MUTE] and [ ] on the remote  control for more than 4 sec.
≥All the indicators will blink for 10 sec when the code of...

26RQT9670
ReferenceTroubleshooting
Before requesting service, make the following checks. If 
you are in doubt about some of the check points, or if the 
solutions indicated in the following guide do not solve the 
problem, refer to “Customer Services Directory (United 
States and Puerto Rico)” on page 31.
No power.≥Insert the AC power supply cord securely. (>20)
≥After turning the main unit on, if the indicators blink and 
the main unit immediately turns off, unplug the AC 
power supply cord and consult...

Reference
RQT967027
The dialog is too persistent or the dialog does 
not sound natural.
This system has a function to make the dialog stand out 
when the volume is low. (>25)
There is no audio.
The power of the main unit turns off 
automatically.
(When the main unit detects a problem, a safety measure 
is activated and the main unit automatically switches to 
standby mode.)
≥There is a problem with the amplifier.
≥ Is the volume extremely high?
If so, lower the volume.
≥ Is this system placed in  an...

28RQT9670
Indicator illumination
The indicators display the condition of this system by flashing. The indicator patterns illustrated below 
are displayed during normal operational conditions. They do not refer to the indications of a problem. 
Refer to “Troubleshooting” ( >26) if the indicators do not light up as illustrated below.
§1  The selected source indicator will also light.
§ 2  The BD/DVD indicator stops blinking and lights once the wireless pairing is successful.
Indicator
Description
The...

Reference
RQT967029
Specifications
AMPLIFIER SECTION
RMS output power
10 % total harmonic distortion
Subwoofer ch
120 W per channel (100 Hz, 8≠)
Front ch (L, R ch)
60 W per channel (1 kHz, 6≠)
Total RMS Dolby Digital mode power
 240 W
FTC output power
1.0 % total harmonic distortion
Subwoofer ch
60 Hz to 120 Hz 40 W (8≠)
Front ch (L, R ch)
120 Hz to 20 kHz 25 W (6≠)
Total FTC Dolby Digital mode power
90 W
WIRELESS SECTION
Wireless module
Frequency Range 5.150 GHz to 5.250 GHz
5.725 GHz to 5.850 GHz...

30RQT9670
	1 Specifications are subject to change without notice.
2 Weight and dimensions are approximate.
3 Total harmonic distortion is measured by a digital spectrum 
analyzer.
SPEAKER GENERAL
Horizontal placement using the stands
Dimensions (WkHkD)
956 mmk102 mmk74 mm
(37
5/8qk41/32qk229/32q)
Mass (Weight)1.61 kg(3.7 lbs)
Horizontal placement using the speaker feet 
and the support legs
Dimensions (WkHkD)
956 mmk78 mmk55 mm
(37
5/8qk31/16qk25/32q)
Mass (Weight)1.57 kg(3.5 lbs)
Horizontal placement...