Panasonic Sc Htb15 Owners Manual

Getting started
11
VQT3Q59
Connect the speaker cables.
≥To make sure that the speaker cable is connected to the correct speaker, match the color of the speaker connector with the 
color of the L/R indicator on the speaker label so as not to connect the speaker cable to the wrong speaker.
≥ Insert the wire fully, taking care not to insert beyond the wire insulation.
Drive a screw (not supp lied) into the wall.
≥Use the measurements indicated below to identify the screwing positions on the wall.
≥ Leave at...

12
VQT3Q59
≥For a safety measure to prevent the speakers from falling, refer to page 16.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Connect the speaker cables.
≥ Insert the wire fully, taking care not to insert beyond the wire insulation.
≥ To make sure that the speaker cable is connected to the correct speaker, match the color of the speaker connector with the 
color of the L/R indicator on the speaker label so as not to connect the speaker cable to the wrong...

Getting started
13
VQT3Q59
≥For a safety measure to prevent the speakers from falling, refer to page 16.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 to 3 of “Place the speakers 
horizontally” ( >10).
Attach the stands.
≥Keep the screws out of reach of children to prevent swallowing.
When placing the speakers on a table
Place the speaker s using the stands
∏1 Speaker (L) ∏1 Speaker (R) ∏2 Speaker cables
(L): WHITE
(R):...

14
VQT3Q59
≥For a safety measure to prevent the speakers from falling, refer to page 16.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 to 3 of “Place the speakers 
horizontally” ( >10).
Attach the speaker feet to the bottom of the speakers.
≥ Keep the speaker feet out of reach of children to prevent swallowing.
Place the speakers using the speaker feet
∏ 1 Speaker (L) ∏1 Speaker (R) ∏2 Speaker cables
(L): WHITE
(R): RED
∏ 1...

Getting started
15
VQT3Q59
≥For a safety measure to prevent the speakers from falling, refer to page 16.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Insert the speaker cable through the base.
≥ Be sure to insert the speaker cable through the threading hole as indicated in the illustration.
Attach the speaker to the base.
≥To make sure that the speaker cable is connected to the correct speaker, match the color of the speaker connector with the 
color of the L/R...

16
VQT3Q59
Connect the speaker cables.
≥Insert the wire fully, taking care not to insert beyond the wire insulation.
To prevent the speakers from  falling, it is recommended to attach the speakers to 
the wall or table with a fall pr evention cord (hereafter “cord”).
	≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that  
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥ Use a...

Getting started
17
VQT3Q59
When placing the speakers on a table
Horizontal placement
Vertical placement
ACord  (not supplied)
B Screw eye (not supplied)
≥Depending on the placement of the speakers, the 
screwing position of the screw eye may differ.
C Wall
D Approx. 150 mm (529/32q)






SC-HTB15PP_VQT3Q59_eng.book  Page 17  Wednesday, June 8, 2011  3:33 PM
 

18
VQT3Q59
≥Turn off all equipment before connection and read the appropriate owner’s manual.
Do not connect the AC power supply cord until all other connections are complete.
∫ HDMI
The HDMI connection supports VIERA Link “HDAVI Control” ( >24) when used with a compatible Panasonic TV.
≥ Use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic’s 
HDMI cable.
Recommended part number (High Speed HDMI cable):
RP-CDHS15 (1.5 m/4.9 ft), RP-CDHS30...

Getting started
19
VQT3Q59
AHDMI cable  (not supplied)
B Optical digital audio cable (not supplied)
[B] Not  labeled “HDMI (ARC)”
HDMI IN
OPTICAL OUT

TV
Active subwoofer
SC-HTB15PP_VQT3Q59_eng.book  Page 19  Wednesday, June 8, 2011  3:33 PM
 

20
VQT3Q59
You can output the audio signal from the connected HDMI compatible Blu-ray Disc player, DVD player, etc. 
with this system and pass the signal through to your TV.
≥ When connecting other external device such as a set t op box, refer to the operating instructions for the 
TV.
Preparation≥ Connect this system to the TV. ( >18, 19)
A HDMI cable (not supplied)
∫HDMI standby pass-through
Even if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI IN 1...