Panasonic Sc Htb10 Operating Instructions

							11
Operating Instructions
You can output the audio signal from the connected HDMI compatible Blu-ray player, DVD player, etc. with 
this unit and pass the signal through to your TV.
Preparation≥ Connect this unit to the TV. ( >10)
	≥Refer to the operating instructions of the connected HDMI compatible device for the necessary setting, to output the video and 
audio signals.
≥Connect only after all other connections are complete.
≥ This unit consumes a small amount of AC power, even  when it is in standby mode (approx. 0.1 W). In the 
interest of power conservation, if you will not be  using this unit for a long time, unplug it from the 
household AC outlet.
≥ The supplied AC power supply cord is  for use with the main unit only. 
Do not use it with other equipment. Also, do not use cords for other equipment with the main unit.
Connection from an HD MI compatible device
AV  O U T
HDMI AV IN

AHDMI cable (not supplied)
E.g., Blu-ray Disc Player
AC power supply cord connection
             

AC IN 
AAC power supply cord  (supplied)
B To a household AC outlet
Saving energy
This unit is designed to conserve it
s power consumption and save energy.
≥ This unit will automatically turn to st andby mode after 30 min if it is inactive.
SCHTB50_10PPC_RQTX1165-P.book  Page 11  Monday, May 10, 2010  11:58 AM
 
						

							12
Using this unit
Preparation≥Turn on the TV.
≥ If VIERA Link is activated on both the connected 
TV and this unit, make sure to change the TV’s 
settings for this unit. ( >14, “Linked operations 
with the TV (VIERA Link
TM “HDAVI ControlTM”)”)
≥ If VIERA Link is not activated or if the TV is not 
compatible with VIERA Link, reduce the volume 
of the TV to its minimum.
1Press [ Í] to turn on this unit.
≥The current status (audio source, active 
audio effects and audio format) is displayed. 
The audio effects and audio format indicator 
will turn off after 4 sec.
2Press [TV] or [BD/DVD] to select 
the audio source. ( >right)
≥If you have selected [BD/DVD], make sure to 
select the TV’s input channel for this unit and 
start the playback.
	≥ Before turning off this unit, be sure to reduce the volume.
≥ Even if this unit is turned off, the device connected to the 
HDMI AV IN terminal will continue to output audio or video to 
the TV.
A The selected audio source is indicated
Green: When the TV is the audio source
Red:
When the device connected to the HDMI AV IN 
terminal is the audio source
Press [ iVOL j] to adjust the volume 
of the speakers.
Press [i SUBWOOFER j] to adjust 
the subwoofer level.
B The indicators blink from left to right ( i) or from 
right to left ( s).
≥ The indicators will not  blink when it has reached 
the maximum or minimum.
Press [MUTE].
B The indicators blink simultaneously while 
muting.
≥ To cancel, press the button again or adjust the 
volume.
≥ Muting is canceled if th is unit is turned off.
Press [ VS] to indicate the audio 
format.
CThe current audio format is indicated for 4 sec.
Green: Dolby Digital
Red:  DTS
Off:  PCM or LPCM
	≥The audio format status is also indicated for 4 sec if the audio 
format on the selected source (TV, Blu-ray Disc/DVD Player, 
etc.) is changed.
≥ The Dolby Virtual Speaker ( VS) audio effect status is also 
indicated. ( >13)
1
2
Audio source indicator
To adjust the volume/
subwoofer level
To mute the sound
Audio format indicator
ACB
SCHTB50_10PPC_RQTX1165-P.book  Page 12  Monday, May 10, 2010  11:58 AM
 
						

							13
Operating Instructions
Audio effects
You can make the dialogue stand out from the 
background noise and also hear sound as if it is 
coming from the center of the TV.
You can enjoy a dynamic sound with a natural 
expansion.
You can enjoy a surround sound effect similar to 
5.1 ch (Dolby Digital or DTS) with any audio 
source.
1Press the button for the respective 
effect on the remote control.
A: Clear-mode Dialog
B: Sound Effect
C: Dolby Virtual Speaker ( VS)
2The status of the selected effect is 
indicated for 4 sec.
A: Clear-mode Dialog
B: Sound Effect
C: Dolby Virtual Speaker ( VS)
On: The indicator lights
Off:
The indicator blinks
3While the indicator is lit or blinking, 
press the same button again to 
change the setting.
	≥When turning the audio effects on or off, there might be a 
slight pause in the audio. This is normal.
≥ Dolby Virtual Speaker ( VS) is also turned on when Sound 
Effect is turned on. (It will remain on even after Sound Effect 
is turned off.)
≥ If Dolby Virtual Speaker ( VS) is turned off while Sound 
Effect is on, the Sound Effect will also be turned off.
≥ The audio format is also indicated when [ VS] is pressed. 
(> 12)
ABCABC
The various audio 
effects
Clear-mode Dialog
Sound Effect
Dolby Virtual Speaker
Changing the audio 
effects
SCHTB50_10PPC_RQTX1165-P.book  Page 13  Monday, May 10, 2010  11:58 AM
 
						

							14
Linked operations with the TV
(VIERA LinkTM “HDAVI ControlTM”)
Preparation
1 Set “VIERA Link” to “On”. 
(The default setting is “On”.)
2 Set the “HDAVI Control” operations on the 
connected equipment (e.g., TV).
3 For the optimal “HDAVI Control” operations 
change the following settings on the connected 
TV
§1.
≥ Set the default speaker settings to this unit.§2
≥Set the speaker selection settings to this unit.
≥ Set the digital audio output settings to be 
compatible with this unit. ( >15)
4 Turn on all “HDAVI Control” compatible 
equipment and select this unit’s input channel 
on the connected TV so that the “HDAVI 
Control” function works properly.
5 Start playback on the device connected to the 
HDMI AV IN terminal and check that the image 
is displayed correctly.
When the connection or settings are changed, 
repeat this procedure.
§1 The availability and function of the settings may vary  depending on the TV. Refer to the operating instructions for 
the TV for details.
§2 If the TV has a default speaker setting within the VIERA  Link setting items, choosing this unit as the default speaker 
will automatically change the speaker selection to this unit.
	≥VIERA Link “HDAVI Control”, based on the control functions 
provided by HDMI which is an industry standard known as 
HDMI CEC (Consumer Electronics Control), is a unique 
function that we have developed and added. As such, its 
operation with other manufacturers’ equipment that supports 
HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of 
December, 2009) for Panasonic’s HDAVI Control compatible 
equipment. This standard is compatible with Panasonic’s 
conventional HDAVI equipment.
≥ Please refer to individual manuals for other manufacturers’ 
equipment supporting VIERA Link function.
You can select whether audio output is from this 
unit or the TV speakers by using the TV menu 
settings. 
Home theater
This unit’s speakers are active.
≥When this unit is in  standby mode, changing the 
TV speakers to this unit in the TV menu will 
automatically turn this unit on and select “TV” as 
the source.
≥ You can control the volume setting using the 
Volume or Mute button on the TV remote control.
≥ If you turn off this unit, TV speakers will be 
automatically activated.
TV
TV speakers are active.
≥The volume of this unit is set to its minimum.
	≥ When switching between this unit’s speakers and TV 
speakers, the TV screen may be blank for several seconds.
When the following operations are performed, this 
unit will automatically turn on§ and change the input 
channel to the corresponding source.
j When play starts on an  HDMI connected device.
j When the input channel on the TV is changed.
§ Only when speaker output is set to this unit.
	≥If “Power off link” is activated on the TV, this unit will turn off 
when the TV is turned off.
Delay between audio and video is automatically 
adjusted, enabling you to enjoy smooth audio for 
the picture.
	≥The delay information is automatically set if the TV is 
compatible to VIERA Link “HDAVI Control 3 or later” and the 
VIERA Link is set to “On”.
When the delay information cannot be retrieved, the audio 
delay is set to 40 ms.
What is VIERA Link “HDAVI 
Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient 
function that offers linked operations of this 
unit, and a Panasonic TV (VIERA) under 
“HDAVI Control”.
You can use this function by connecting the 
equipment with an HDMI cable. See the 
operating instructions for connected 
equipment for operational details.
Speaker Selection
Automatic input switching
Automatic lip-sync 
function 
(for HDAVI Control 3 or later)
SCHTB50_10PPC_RQTX1165-P.book  Page 14  Monday, May 10, 2010  11:58 AM
 
						

							15
Operating Instructions
Specifications
Dimensions (WkHk D):
(Without wall mount bracket)
800 mmk108 mm k58 mm 
(31
1/2qk 41/4qk 29/32q)
(With wall mount bracket)
800 mmk108 mm k80 mm 
(31
1/2qk 41/4qk 35/32q)
Mass (Weight):
(Without wall mount bracket) Approx. 3.2 kg (7.1 lbs)
(With wall mount bracket)
Approx. 3.3 kg (7.3 lbs)
Operating temperature range:
0
oC to r40oC (r32oF to  r104oF)
Operating humidity range: 20 % to 80 % RH (no condensation)
RMS Output Power Front ch: 30 W per channel (4 ≠), 1 kHz, 10 % THD
Subwoofer ch:
30 W per channel (4 ≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power: 120 W
FTC Output Power
Front ch: 20 W per channel (4≠),
120 Hz to 20 kHz, 1 % THD
Subwoofer ch: 20 W per channel (4≠),
40 Hz to 120 Hz, 1 % THD
Total FTC Dolby Digital mode power: 80 WFRONT SPEAKERS (BUILT-IN)
Ty p e : 1 way 1 speaker system (Bass Reflex)
Full range: 6.5 cm (2
1/2q)Conetype k2
SUBWOOFER (BUILT-IN) Ty p e : 1 way 1 speaker system (Bass Reflex) k2
Woofer: 8cm(3
1/8q)Conetype k2
HDMI This unit supports “HDAVI Control 5” function.
HDMI input
Input connector: Type A (19 pin)
HDMI AV output Output connector: Type A (19 pin)
Digital Audio Input (TV only) Optical digital input: Optical terminal
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: LPCM, Dolby Digital
IR Blaster Terminal 1: 3.5 mm (
1/8q)jack
	1 Specifications are subject to change without notice.
Mass and dimensions are approximate.
2 Total harmonic distortion is measured by a digital spectrum  analyzer.
Audio information
∫ Compatible audio formats
This unit is compatible with the following formats:
Dolby Digital, DTS Digital Surround, 2-channel 
LPCM and multi-channel LPCM.
≥When using the optical digital audio cable, this 
system is not able to play  audio with a sampling 
frequency greater than 48 kHz.
(Sound Effect and Dolby Virtual Speaker will be 
automatically canceled if the audio signal’s 
sampling frequency is greater than 48 kHz.)
GENERAL
Power consumption: 25 W
Power consumption in standby mode: Approx. 0.1 W
Power supply: AC 120 V, 60 Hz
AMPLIFIER SECTION
SPEAKER SECTION
TERMINAL SECTION
SCHTB50_10PPC_RQTX1165-P.book  Page 15  Monday, May 10, 2010  11:58 AM
 
						

							16
Troubleshooting
Before requesting service, make the following checks. If you are in doubt about some of the check points, 
or if the solutions indicated in the following guide do not solve the problem, refer to “Customer Services 
Directory (United States and Puerto Rico)” on page 19 if y ou reside in the U.S.A. or Puerto Rico, or refer to 
“Product information” on page 19 if you reside in Canada.
To return to the factory preset.
≥ While this unit is on, press [POWER  Í/I] on this 
unit for more than 4 sec.
(All the indicators will blink twice when the unit is 
reset.)
The remote control doesn’t work properly.
≥ It is possible that the insulation sheet has not 
been removed. Remove the insulation sheet. 
(> 7)
≥ The remote control and main unit are using 
different codes. Change the code on the remote 
control. ( >17)
≥ It may be necessary to set the code of the remote 
control again after changing the battery of the 
remote control. ( >17)
This unit does not operate correctly.
≥If the HDMI cable is connected to the wrong 
terminal (HDMI AV IN or HDMI AV OUT), this unit 
will not operate correctly. Turn this unit off, 
disconnect the AC power supply cord and 
reconnect the HDMI cable(s). ( >10)
When operating the connected device, this unit 
reacts in an unwanted manner.
≥HDAVI Control commands may use a different 
signal depending on the make of the device. In 
this case, set “VIERA Link” to “Off”. ( >17, 
“VIERA Link”)
VIERA Link related operations no longer 
function properly.
≥ Check the “VIERA Link” setting on the connected 
devices.
≥ When the HDMI connections are changed, after a 
power failure or after the AC power supply cord 
has been removed, VIERA Link operations may 
not function properly. No power.
≥
Insert the AC power supply cord securely. (> 11 )
≥ After turning this unit on, if the “TV, BD/DVD” 
indicator or the “ D/DTS ” indicator blinks and 
this unit immediately turns off, unplug the AC 
power supply cord and consult your dealer.
The unit is automatically switched to standby 
mode.
≥ This unit will automatically turn to standby mode 
after 30 min if it is inactive. ( >11 )
Power of this unit is turned off when the input 
for the TV is changed.
≥This is a normal feature when using VIERA Link 
(HDAVI Control 4 or later). For details please 
read the operating instructions for the TV.
No sound (or image).
≥ Turn muting off. ( >12)
≥ Check the connections to the other devices. 
(> 10)
≥ Check the audio output settings on the connected 
device.
≥ Turn this unit off and then on again.
≥ When connected to an ARC compatible TV, 
check if the TV’s connected terminal is ARC 
compatible.
≥ If the connections are correct, there might be a 
problem with the cables. Reconnect the unit with 
different cables.
≥ When using the optical digital audio cable, this 
system is not able to play audio with a sampling 
frequency greater than 48 kHz.
Sound is not heard when playing DVD-Audio
≥This may occur due to digital copyright protection 
of the disc when using the optical digital audio 
cable. This system is not ab le to play audio with a 
sampling frequency greater than 48 kHz.
General operationPower
Sound
SCHTB50_10PPC_RQTX1165-P.book  Page 16  Monday, May 10, 2010  11:58 AM
 
						

							17
Operating Instructions
If the “ D/DTS” indicator is blinking, unplug 
the AC power supply cord and consult your 
dealer.
If the “TV, BD/DVD” indicator is blinking, try the 
following to correct the problem. Consult your 
dealer if the problem persists.
≥Turn the connected device off and on again.
≥ Turn this unit off and reconnect the HDMI cables 
and then turn this unit on again.
If this unit is connected to a non-Panasonic 
ARC compatible TV, connect using an optical 
digital audio cable. ( >10)
≥ After connecting the optical digital audio cable, 
the setting of this unit must be changed to specify 
the audio input terminal. ( >right, “TV Audio”)
Audio is output from the TV speakers and not 
this unit’s.
≥When connected to a VIERA Link (HDAVI 
Control) compatible TV, change the audio output 
settings to this unit. ( >14)
Refer to “Troubleshooting” ( >16) before 
changing any of the following settings.
The settings remain intact even if you switch the 
unit to standby mode.
	A will blink green once when the setting is changed.
∫ VIERA Link
Changes to this setting become effective after 
turning off and on all the connected devices.
Set “VIERA Link” to “Off”.
Set “VIERA Link” to “Off” when you do not want to 
use “HDAVI Control”. ( >16, “General operation”)
Press and hold [INPUT SELECTOR] on this 
unit and [BD/DVD] on the remote control for 
more than 2 sec.
≥ When set to “Off”, the ARC function is not 
available. Be sure to connect using the optical 
digital audio cable. ( >10) Set “VIERA Link” to “On”.
Press and hold [INPUT SELECTOR] on this 
unit and [SOUND EFFECT] on the remote 
control for more than 2 sec.
∫TV Audio
Set “TV Audio” to “ARC Off”.
Set “TV Audio” to “ARC Off” only when using an 
optical digital audio cable with an ARC compatible 
TV. ( >16, “Sound”)
Press and hold [INPUT SELECTOR] on this 
unit and [TV] on the remote control for more 
than 2 sec.
Set “TV Audio” to “Auto”. Press and hold [INPUT SELECTOR] on this 
unit and [CLEAR-MODE DIALOG] on the 
remote control for more than 2 sec.
When other Panasonic products respond to this 
unit’s remote control, change the remote control 
code on this unit and the remote control.
Preparation
≥ Turn off all other Panasonic products.
≥ Turn on this unit.
Change the remote control to code 2:
1 Aim the remote control at this unit’s remote 
control sensor.
2 Press and hold [CLEAR-MODE DIALOG] and 
[BD/DVD] on the remote control for more than 
4sec.
A will blink green once when the code of this unit is 
changed.
	≥ If the unit does not operate after changing the code, repeat 
steps 1 and 2 .
≥ To change the remote control to code 1, repeat the steps 
above, but replace [BD/DVD] with [TV].
Changing this unit’s 
settings
A
Remote control code
A
SCHTB50_10PPC_RQTX1165-P.book  Page 17  Monday, May 10, 2010  11:58 AM
 
						

							18
Limited Warranty 
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company, 
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Home Audio Pr oducts Limited Warranty
Limited Warranty Coverage
(For USA and Puerto Rico Only)
If your product does not work properly because of a defect in 
materials or workmanship, Panasonic Consumer Electronics 
Company (referred to as “the warrantor”) will, for the length of 
the period indicated on the chart below, which starts with the 
date of original purchase (“warranty period”), at its option either 
(a) repair your product with new or refurbished parts, (b) 
replace it with a new or a refurbished equivalent value product, 
or (c) refund your purchase price. The decision to repair, 
replace or refund will be made by the warrantor.
During the “Labor” warranty period there will be no charge for 
labor. During the “Parts” warranty period, there will be no 
charge for parts. This Limited Warranty excludes both parts and 
labor for non-rechargeable batteries, antennas, and cosmetic 
parts (cabinet). This warranty only applies to products 
purchased and serviced in the United States or Puerto Rico. 
This warranty is extended only to the original purchaser of a 
new product which was not sold “as is”.
Carry-In or Mail-In ServiceTo find a service center please visit http://www.panasonic.com/help or call 1-800-211-PANA (7262).
When shipping the unit, carefully pack, include all accessories, 
and send it prepaid, adequately insured and preferably in the 
original carton. If Lithium Ion batteries are shipped by air the 
package must be labeled “Contains Lithium Ion Battery (No 
lithium metal)”. Damaged batteries are prohibited from 
shipment by US Mail. Batteries must be securely packed in a 
manner to prevent short-circuiting and a package cannot 
contain more than 3 Lithium Ion batteries. Include a letter 
detailing the complaint, a return address and provide a daytime 
phone number where you can be reached. A valid registered 
receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF  PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And ExclusionsThis warranty ONLY COVERS failures due to defects in 
materials or workmanship, and DOES NOT COVER normal 
wear and tear or cosmetic damage. The warranty ALSO DOES 
NOT COVER damages which occurred in shipment, or failures 
which are caused by products not supplied by the warrantor, or 
failures which result from accidents, misuse, abuse, neglect, 
mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, 
improper maintenance, power line surge, lightning damage, 
modification, introduction of sand, humidity or liquids, 
commercial use such as hotel, office, restaurant, or other 
business or rental use of the product, or service by anyone 
other than a Factory Service Center or other Authorized 
Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS 
LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL 
OR CONSEQUENTIAL DAMAGES RESULTING FROM 
THE USE OF THIS PRODUCT, OR ARISING OUT OF 
ANY BREACH OF THIS WARRANTY. 
(As examples, this excludes damages for lost time, travel to 
and from the servicer, loss of or damage to media or images, 
data or other memory or recorded content. The items listed are 
not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, 
INCLUDING THE WARRANTY OF MERCHANTABILITY, 
ARE LIMITED TO THE PERIOD OF THE LIMITED 
WARRANTY.
Some states do not allow the exclusion or limitation of incidental 
or consequential damages, or limitations on how long an 
implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also 
have other rights which vary from state to state. If a problem 
with this product develops during or after the warranty period, 
you may contact your dealer or Service Center. If the problem is 
not handled to your satisfaction, then write to the warrantor’s 
Consumer Affairs Department at the addresses listed for the 
warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY 
THIS LIMITED WARRANTY, ARE YOUR 
RESPONSIBILITY.
Product or Part Name Parts Labor
Audio Products
(except items below)
1 year 1 year
DVD Home Theater System 1 year 1 year
Home Theater Audio System 1 year 1 year
USB Reader-writer, PC Card 
Adapters (defective 
exchange) 1 year Not Applicable
Accessories: Headphones, 
cartridges, Microphones, 
Adapters 90 days 90 days
Rechargeable Batteries, 
DVD-RAM Disc (defective 
exchange) 10 days Not
Applicable
SD Memory Cards, 
Rechargeable Battery Packs 
(defective exchange) 90 days Not
Applicable
SCHTB50_10PPC_RQTX1165-P.book  Page 18  Monday, May 10, 2010  11:58 AM
 
						

							19
Operating Instructions
As of November 2009
Product Service
1. Damage requiring service— The unit should be 
serviced by qualified service personnel if: (a) The AC power supply cord or AC adaptor  has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or  exhibits a marked change in performance; or
(e) The unit has been dropped or the cabinet  damaged.
2. Servicing — Do not attempt to service the unit 
beyond that described in these operating 
instructions. Refer all other servicing to 
authorized servicing personnel.
3. Replacement parts — When parts need 
replacing ensure the servicer uses parts 
specified by the manufacturer or parts that have 
the same characteristics as the original parts. 
Unauthorized substitutes may result in fire, 
electric shock, or other hazards.
4. Safety check — After repairs or service, ask the 
servicer to perform safety checks to confirm that 
the unit is in proper working condition. The servicer will require all components to service 
your system.
Therefore, should service ever be necessary, be 
sure to bring the entire system.
For product information or assistance with product 
operation:
In the U.S.A. and Puerto Rico, refer to “Customer 
Services Directory (United States and Puerto Rico)” 
above.
In Canada, contact the Panasonic Canada Inc. 
Customer Care Centre at 1-800-561-5505, or visit 
the website (www.panasonic.ca), or an authorized 
Servicentre closest to you.
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service 
Center; purchase Parts and Accessories; or make Customer Service and Literature requests by 
visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, 
Saturday-Sunday 10am-7pm ESTFor hearing or speech impaired TTY users, TTY: 1-877-833-8855 
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web 
Site at: 
http://www.pstc.panasonic.com
Or, send your request by E-mail to: 
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone)  1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic Service and  Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Ca rd, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277 
Product information
SCHTB50_10PPC_RQTX1165-P.book  Page 19  Monday, May 10, 2010  11:58 AM
 
						

							20
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.
PANASONIC PRODUCT—LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and 
agrees to remedy any such defect for a period as stated below from the date of original purchase.
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purch ased outside Canada or to any product which has been 
improperly installed, subjected to usage for whic h the product was not designed, misused or abused, 
damaged during shipping, or which has been altered or re paired in any way that affects the reliability or 
detracts from the performance, nor does it cover any pr oduct which is used commercially. Dry cell batteries 
are also excluded from coverage under this warranty.
This warranty is extended to the orig inal end user purchaser only. A purchase receipt or other proof of date 
of original purchase is required bef ore warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR 
IMPLIED, INCLUDING ANY IMPLIED WARRANTI ES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR 
CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential 
damages, or the exclusion of implied warranties,  so the above limitations and exclusions may not be 
applicable.
WARRANTY SERVICE
FOR PRODUCT OPERATION ASSISTANCE,  please contact:
Our Customer Care Centre: Telephone #:  (905) 624-5505 1-800 #:  1-800-561-5505
Fax #: (905) 238-2360
Email link: “Customer support” on www.panasonic.ca
FOR PRODUCT REPAIRS,  please locate your nearest Authoriz ed Servicentre at www.panasonic.ca:
Link : “Servicentres
TM locator” under “Customer support” IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton. Include details of the defect claimed, and  proof of date of original purchase.
Technics Audio Product 
One (1) year, parts and labour
Panasonic Portable/Clock Radio (without Tape, CD, MD) One (1) year, parts and labour
Panasonic Audio/SD Audio Product One (1) year, parts and labour
Panasonic BD/DVD Product One (1) year, parts and labour
Panasonic Combination DVD Player/VCR One (1) year, parts and labour
Panasonic Combination DVD Recorder/VCR One (1) year, parts and labour
Accessories including rechargeable batteries Ninety (90) days
SCHTB50_10PPC_RQTX1165-P.book  Page 20  Monday, May 10, 2010  11:58 AM