Panasonic Sc Htb10 Operating Instructions

21
Operating Instructions
Installation Instructions
Installation Instructions
Home Theater Audio System
Model No. SC-HTB10
Safety Precautions
WA R N I N GEnsure that the installation location is strong enough to support long-term use.
≥ If its strength becomes insufficient  over the course of long-term use, the unit may drop, possibly causing 
injury.
The installation work should never be done by any other than a qualified installation specialist.
≥ Incorrect installation may cause equipment to fall, and...

22
WARNING:PROFESSIONAL INSTALLATION IS REQUIRED.
PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING 
DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING.
Requests regarding handling:1Exercise care when selecting the location for the uni t because it may discolor or deform due to light 
or heat if it is placed where it is exposed to direct sunlight, or near a heater.
2 Clean the wall mount brackets by wiping them with  a soft, dry cloth (such as cotton or flannel). If...

23
Installation Instructions
Components
The images shown in this installation instructions are for illustrative purpose only.
Check the supplied components before starting.
Commercially available components (not supplied)
≥ Screws for wall mounting
≥ Fall prevention cord ≥
Screws to attach fall prevention cord to wall
	≥ Use commercially available screws with a nominal diameter of 4.0 mm (5/32q) that are suited to the wall material (wood, steel 
frame, concrete etc.) you are attaching the wall mount...

24
3Complete all the necessary connections to this unit. (>10)
≥Connect the AC power supply cord to this unit, but  do not connect it to the household AC outlet until 
the installation is completed.
	≥ For details, refer to the operating instructions for this unit.
4Use the measurements indicated below  to identify the screwing positions on 
the wall.
A 36 mm (113/32q)
B 72 mm (227/32q) C
108.5 mm (4
9/32q)
D 583 mm (2215/16q)
	≥ Position the unit with at least 20 mm (25/32q) of space above the unit and...

25
Installation Instructions
6Thread a cord (not supplied) through the wall mount bracket.
≥Use a cord which is capable of supporting over 20 k g (44.1 lbs).
A Rear of this unit
B Fall prevention cord (not supplied)
7Attach the lock pins into  the wall mount bracket.
≥The lock pins are designed to lock the wall mount brac kets to the screws that this unit is attached to. 
Hence, preventing this unit fr om falling off the screws.
≥ Keep the lock pins out of reach of children to prevent swallowing.
≥...

26
9Mount the unit securely onto the screws.
AMove this unit so that the screw is in this position.
	≥Be sure that both the wall mount brackets are securely attached to the screws.
≥ If this unit is tilting forward, remove this unit from the screws and adjust by tightening the screws.
10Push the lock pins fully into place.
A Rear of this unit
B Lock pin (supplied)
C Screw (not supplied)
	≥Be sure to attach both lock pins correctly.
11Attach the cord to a wall with a screw (not supplied).
≥Keep the screws...

27
Installation Instructions
SCHTB50_10PPC_RQTX1165-P.book  Page 27  Monday, May 10, 2010  11:58 AM
 

Panasonic Corporation 2010
Printed in Malaysia One Panasonic Way, Secaucus, 
New Jersey 07094
http://www.panasonic.com
www.panasonic.ca5770 Ambler  Drive, 
Mississauga, Ontario 
L4W 2T3 
RQTX1165-1PF0410SA1005
-If you see this symbol-
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
 Rules.
These limits are designed to provide reasonable protection against harmful interference...