Panasonic Sc Ht870 Operating Instructions

							11
RQT7429
Connecting speakers with the subwoofer
[HT520]
12345
Sheet of speaker-cable stickers
Insert the wire fully.
Click! Speaker-cable sticker
Copper 2 FRONT (R)
4 SURROUND (R) 1 FRONT (L)
SUBWOOFER3 SURROUND (L)
5 CENTER
Silver 5 speaker cables
≥3k4-m cables: For front and center speakers
≥2k10-m cables: For surround speakers
RQT7429-2B book.book  11 ページ  ２００４年３月４日　木曜日　午前１０時３６分
 
						

							12
RQT7429
Video connections
≥Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not display 
properly.
≥Turn the television off before connecting, and refer to the 
television’s operating instructions.
∫Television with a VIDEO IN terminal
∫Television with an S-VIDEO IN terminal∫Television with COMPONENT VIDEO IN 
terminals
[The\United\Kingdom,\Continental\Europe\and\Russia]
∫Television with SCART terminal
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the 
VIDEO OUT terminal by separating the chrominance (C) and 
luminance (Y) signals. (Actual results depend on the television.)
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive 
output and provide a purer picture than the S-VIDEO OUT 
terminal. Connection using these terminals outputs the color 
difference signals (P
B/PR) and luminance signal (Y) separately in 
order to achieve high fidelity in reproducing colors.
≥The description of the component video input terminals depends 
on the television or monitor (e.g. Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR). 
Connect to terminals of the same color.
[The\United\Kingdom,\Continental\Europe\and\Russia]
≥When making this connection, select “Video/Y PB PR” or 
“S-Video/Y PB PR” from QUICK SETUP (‹page 14).
SCART (AV) terminal
To improve picture quality, you can change the video signal output 
from the SCART (AV) terminal from “Video” to either “S-Video” or 
“RGB” to suit the type of television you are using. Select “S-Video/
Y PB PR” or “RGB/No Output” from QUICK SETUP (‹page 14).
Video cable
STEP4Video connections
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUTPB
PR
Y(480P/480I)
VIDEO INTelevision
(not included)
Back of the 
main unitVideo cable
(included)
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUTPB
PR
Y(480P/480I)
IN S-VIDEO
S-video cable
(not included) Television
(not included)
Back of the 
main unit
COMPONENT
VIDEO IN
PRPBY
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUTPB
PR
Y(480P/480I)
Television
(not included)
Video cables
(not included)
Back of the 
main unit
AV
AVTelevision
(not included)
Scart cable
(not included)
Back of the 
main unit
To enjoy progressive video
≥Connect to the component video input terminals on a 480P 
compatible television. (Video will not be displayed correctly if 
connected to an incompatible television.)
≥When playing NTSC discs, change video output mode to 
“480P” (‹page 23) or press [PROGRESSIVE] on the main 
unit so “PROG.” appears on the display.
All Panasonic televisions that have 480P input connectors are 
compatible. Consult the manufacturer if you have another 
brand of television.
[Note]
Output from this unit is interlace if you have connected to the 
television through the VIDEO OUT, S-VIDEO OUT or SCART 
(AV) terminal or when playing PAL discs, even if “PROG.” is on 
the display.
RQT7429-2B book.book  12 ページ  ２００４年３月４日　木曜日　午前１０時３６分
 
						

							13
RQT7429
Radio and system connection/The remote control
Do not:
≥mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can caus e electrolyte leakage which can 
damage items the fluid contac ts and may cause a fire.
Remove if the remote control is not going to be used for a long 
period of time. Store in a cool, dark place.
∫ Use
Aim at the sensor ( ‹page 14), avoiding obstacles, at a maximum 
range of 7 m directly in front of the unit.
STEP5Radio and system connection
CO VPB
PR
AL
R
TV
AUDIO
IN
VCR
AUDIO
IN
AUX
LINE
OUTAM ANT
LOOPEXT
FM ANT (75h)
1
2
VOLT ADJ
127 V     110 V     220 V-230 V     240 V
 System cable AM loop 
antennaFM indoor 
antenna
AC mains lead
Subwoofer
Adhesive tape
Fix the other end of the antenna 
where reception is best.
AM loop antenna
Click!
System cable To household mains socket
FM indoor antenna
Catch up
To disconnect
Press the catch 
and pull out.
To disconnect
Press the catch 
and pull out.
[The\United\Kingdom,[
[Saudi[Arabia]and[Kuwait]
\Southeast\Asia,	he\Middle\East, 
\South\Africa,\Saudi\Arabia\and\Kuwait[
Before connecting the
AC mains lead
Set the voltage.
Use a flat-head screwdriver to turn 
the voltage selector on the back of 
the subwoofer to the appropriate 
position for the area in which this 
system is used.
If the power supply in your area is 
115 V or 120 V, please set the voltage 
selector as follows:
≥
For 115 V: Set to 110 V.
≥ For 120 V: Set to 127 V.
AC mains lead
Conserving power
The main unit consumes a small amount of power, even when it is turned 
off (For the United Kingdom, Continental Europe, Russia, Australia and 
N.Z.: approx. 0.7 W or for Southeast Asia, the Middle East, South Africa, 
Saudi Arabia and Kuwait: approx. 0.9 W). To save power when the unit is 
not to be used for a long time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the unit.Main unit
[Australia\and\N.Z.]
Stand the antenna up on its base. Place 
the antenna where the reception is best.
Keep loose antenna cable away from 
other wires and cables.
Catch up
≥
Connect the AC mains lead after all other connections are complete.
≥ Optional antenna connections ( ‹page 27).
[The\United\Kingdom,[Saudi[Arabia]and[Kuwait]
BE SURE TO READ THE CAUTION FOR THE AC 
MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
[[Continental[Europe,[Russia,[Southeast]
]Asia,[the[Middle[East,[South[Africa,[Saudi[
[Arabia[and[Kuwait]
STEP6The remote control
R6/LR6, AA, UM-3
2
3
1
Remote controlBatteries
≥Do not use 
rechargeable type 
batteries.
Insert so the poles (
i and  j) match 
those in the remote control.
7429en-p03-30.fm  13 ページ  ２００４年３月５日　金曜日　午後３時５４分
 
						

							14
RQT7429
QUICK SETUP/Control reference guide
The QUICK SETUP screen assists you to make necessary settings.
Turn on the television and select the appropriate video input on the television.
To change these settings later
Select “ QUICK SETUP” in “Others” tab (‹page 25).
123 4 56
Turn the unit 
on.Select 
“DVD/CD”.Shows QUICK 
SETUP screen.Follow the messages 
and make the settings.Press to 
finish QUICK 
SETUP.Press to exit.
STEP7QUICK SETUP
DVD/CDSETUPMUTINGSHIFTrENTERRETURN
Select
Register
ENTER
SETUPMUTINGSHIFTr
VOLUME
123
456
78
09CH
CANCEL
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
DISPLAY
AV SYSTEMVCR/AUXTV
SLEEPTUNER/BANDDV D / C D
-/--S10
PLAY 
LIST
TV VOL
TV VOLSUBWOOFER
LEVELSFCC.FOCUSSUPER SRNDMIX 2CH
   PL
C.S.MPOSITION
MEMORYZOOMAUD IO
PA G E
GROUPREPEATPLAY MODE
TEST
CH SELECTQUICK REPLAYSUBTITLE
TV/AV
SHIFT
SETUPMUTING
FL DISPLAYC.S.MPOSITION
MEMORYZOOMAUDIO
PA G E
GROUPREPEATPLAY MODE
TEST
CH SELECTQUICK REPLAYSUBTITLE
SUBWOOFER
LEVELSFCC.FOCUSSUPER SRNDMIX 2CH
   PL
(30) (28) (28)(28, 30)
(30) (18) (18)(24, 31)
(17)(17, 18)(19) (19)
(29) (18) (18)
SETUPMUTING
FL DISPLAY
RDS
PROGRESSIVESFCSUBWOOFER  LEVELINPUT SELECTORTUNE MODEFM MODEMEMORY/IOPEN/CLOSEVOLUME
DOWNUPPHONESTUNING
Turn the unit on.Select the source 
(14, 26, 33).
(17)
(17, 20, 21)
To use functions labeled in orange:
While pressing [SHIFT], press the corresponding button.Standby/on switch [Í/I]
Press to switch the unit from on to 
standby mode or vice versa.
In standby mode, the unit is still 
consuming a small amount of power. Standby/on indicator
When the unit is connected to the AC mains 
supply, this indicator lights up in standby mode and 
goes out when the unit is turned on.
Source select button [INPUT SELECTOR] (26)
DVD/CD 
# FM # AM # TV # VCR # AU X
# Return to DVD/CD
AC supply 
indicator (AC IN)
This indicator lights 
when the unit is 
connected to the AC 
mains supply. (17, 20, 21)Adjust the volume. (26, 33) (31)
(14)
(22, 33)(17, 33)(17)
Control reference guide
See reference pages in brackets.
RDS, Progressive button (17, 27)
Remote control 
signal sensor Switch the
television’s video
input mode (33).(33)
RQT7429-2B book.book  14 ページ  ２００４年３月４日　木曜日　午前１０時３６分
 
						

							15
RQT7429
Discs that can be played/Disc handling
Discs that can be played
§A process that allows play on compatible equipment.
≥It may not be possible to play the above discs in all cases due to the type of disc or condition of the recording.
∫Discs that cannot be played
DVD-ROM, CD-ROM, CDV, CD-G, DVD+R, iRW, DVD-RW, SACD, 
Divx Video Discs and Photo CD, DVD-RAM that cannot be removed 
from their cartridge, 2.6-GB and 5.2-GB DVD-RAM, and “Chaoji 
VCD” available on the market including CVD, DVCD and SVCD that 
do not conform to IEC62107.
∫Audio format of DVDs
This unit automatically recognizes 
and decodes discs with these 
symbols.
∫Video systems
– This unit can play PAL and NTSC, but your television must match 
the system used on the disc.
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL 
television (‹page 24, “NTSC Disc Output” in “Video” tab).
∫To clean discs
[DVD-A] [DVD-V] [VCD] [CD]
Wipe with a damp cloth and then wipe dry.
[RAM] [DVD-R]
≥Clean with an optional DVD-RAM/PD disc cleaner
(LF-K200DCA1, where available).
≥Never use cloths or cleaners for CDs, etc.
∫Disc handling precautions
≥Do not attach labels or stickers to discs (This may cause disc 
warping, rendering it unusable).
≥Do not write on the label side with a ball-point pen or other writing 
instrument.
≥Do not use record cleaning sprays, benzine, thinner, static 
electricity prevention liquids or any other solvent.
≥Do not use scratch-proof protectors or covers.
≥Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels 
(rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
Disc Logo
Indication 
used in 
operating 
instructions
Remarks
DVD-RAM[RAM]Recorded using Version 1.1 of the 
Video Recording Format (a unified 
video recording standard).≥Recorded with DVD-Video recorders, DVD-
Video cameras, personal computers, etc.
≥Remove TYPE 2 
and 4 discs from 
their cartridges 
before use. 
[JPEG]Recorded using the DCF (Design 
rule for Camera File system) 
standard.≥Recorded with Panasonic DVD-Video 
recorders.
≥To play JPEG files, select “Play as Data Disc” 
in Other Menu (‹page 23).
DVD-Audio[DVD-A]—
[DVD-V]Some DVD-Audio discs contain DVD-Video content.
To play DVD-Video content, select “Play as DVD-Video” in Other Menu (‹page 23)
DVD-Video
[DVD-V]—
DVD-RPanasonic DVD-R recorded and finalized
§ on Panasonic DVD-Video recorders or 
DVD-Video cameras are played as DVD-Video on this unit.
Video CD
[VCD]—
SVCDConforming to IEC62107
CD[CD]This unit is compatible with HDCD, but does not support the Peak Extend function. 
(A function which expands the dynamic range of high level signals)
HDCD-encoded CDs sound better because they are encoded with 20 bits, as 
compared with 16 bits for all other CDs.
≥During HDCD play, “HDCD” lights on the unit’s display.
CD-R
CD-RW
—
[WMA]
[MP3]
[JPEG]
[CD]
[VCD]≥This unit can play CD-R/RW (audio recording disc) recorded with the formats on 
the left. Close the sessions or finalize§ the disc after recording.
≥HighMAT discs
WMA, MP3 or JPEG files only.
To play without using the HighMAT function, select “Play as Data Disc” in Other 
Menu (‹page 23).
HighMAT™ and the HighMAT logo are either 
trademarks or registered trademarks of 
Microsoft Corporation in the United States 
and/or other countries.
Disc handling
RQT7429-2B book.book  15 ページ  ２００４年３月４日　木曜日　午前１０時３６分
 
						

							16
RQT7429
Basic play
Basic play
[Note[
Discs continue to rotate while menus are displayed. Press [∫] when 
you finish to preserve the unit’s motor and your television screen.
RDS
PROGRESSIVESFCSUBWOOFER  LEVELINPUT SELECTOR
TUNE MODEFM MODEMEMORY/IOPEN/CLOSE
VOLUME
DOWNUPPHONESTUNING
1 Turn the unit 
on.2 Select 
“DVD/CD”.
5 Start play.
4 Load the 
disc.
≥Load double-sided 
discs so the label 
for the side you 
want to play is 
facing up.
6 Adjust the 
volume. 3 Open the 
disc tray.
PROGRESSIVE
/IINPUT SELECTOROPEN/CLOSEOPEN/CLOSE
DOWNUP
If you are experiencing problems, refer to troubleshooting
(‹ page 38, 39).
RQT7429-2B book.book  16 ページ  ２００４年３月４日　木曜日　午前１０時３６分
 
						

							17
RQT7429
Basic play
Stop
The position is memorized 
while “RESUME” is on the 
display.
≥Press [1] (play) to resume. 
[DVD-V] To  r e v i e w  t h e  
previous chapters 
(‹page 18, Position 
memory)
≥Press [∫] to clear the 
position.
Pause≥Press [1] (play) to start play.
Skip
Search
(during play)≥Up to 5 steps.
≥Press [1] (play) to start play.
Slow-motion
(during pause)≥ [VCD] Slow motion, forward 
direction only.
Progressive 
video
Main unit only 
Frame-by-
frame
(during pause)≥ [VCD] Forward direction only.
VOLUME
123
456
78
09CH
CANCEL
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
DISPLAY
AV SYSTEMVCR/AUXTV
SLEEPTUNER/BANDDV D / C D
-/--S10
PLAY 
LIST
TV VOL
TV VOLSUBWOOFER
LEVELSFCC.FOCUSSUPER SRNDMIX 2CH
   PL
C.S.MPOSITION
MEMORYZOOMAUDIO
PA G E
GROUPREPEATPLAY MODE
TEST
CH SELECTQUICK REPLAYSUBTITLE
TV/AV
SHIFT
SETUPMUTING
FL DISPLAY
CANCEL
TOP MENU
GROUPRETURNMENU
SUBTITLE
,,
FL DISPLAY
DVD/CD
VOLUME
342 1
ENTER
ij
Numbered
buttons
SKIP
ENTER
≥[WMA] [MP3] [JPEG]
[34]: Group skip 
during play
[21]: Content skip 
during play 
SLOW/SEARCH
RDS
PROGRESSIVE
TUNEDMP3ST L R PTYDISC
SLEEP
TTL GRPD.MIX
PROG.WMA CSM RNDHDCD SFC SEQDVD-PGMAV RCDMONO RDS PS
ENTER
On-screen 
item select
Enter number
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
e.g. To select 12:
[S10] ‹ [1] ‹ [2]
[VCD] with playback control
While stopped, press the 
numbered buttons.
[WMA] [MP3] [JPEG]
e.g. To select 123:
[1] ‹ [2] ‹ [3] ‹ [ENTER]
≥Press [CANCEL] to cancel 
the number(s).
Starting play 
from a 
selected 
group
[DVD-A] [WMA] [MP3] [JPEG]
A folder on WMA/MP3 and JPEG discs is 
treated as a “Group”.
Return to 
previous 
screen
Main unit 
display
[RAM] [DVD-A] [DVD-V] [WMA] 
[MP3]
Time display
,.Number display
[JPEG]
When Slideshow is on:
SLIDE
()Number display
When Slideshow is off:
PLAY
()Number display
Information 
screen
[WMA] [MP3] [JPEG] 
[CD] (CD text only)
Turns the information screen 
on/off
[DVD-A] [DVD-V]
Shows a disc top menu
Disc menu
[DVD-V]
Shows a disc menu
[VCD]
Shows a disc menu
ENTER
Select
Register
123
456
78
09
-/--S10
CANCEL
ENTER
PA G E
GROUP
ENTER#
Register Select
RETURN
FL DISPLAY
SUBTITLE
TOP MENU
MENU
RETURN
RQT7429-2B book.book  17 ページ  ２００４年３月４日　木曜日　午前１０時３６分
 
						

							18
RQT7429
Convenient functions
Convenient functions
See below for details.
(Only when the elapsed play time can be displayed.
[JPEG]: Works with all JPEG content.)
This position is memorized even after turning off the unit, changing 
the source or changing the disc.
Press [POSITION MEMORY].
≥Up to 5 discs.
≥When the sixth disc is memorized, the earliest position is replaced.
When the unit is turned on, “DVD/CD” is reselected or the disc is 
inserted, “RESUME” displays.
Press [1] (play) to start play from that 
position.
To review the previous chapters [DVD-V]
Press [1] (play) while the following message is displayed.
The beginning portions of each chapter up to the current one are played.
≥Do not press [1] (play) if you want to cancel review.
[RAM]
 [DVD-V] [VCD]
Press [SHIFT]i[ZOOM] 
several times to select the 
preset aspect ratio or 
“Auto”. (Just Fit Zoom)
Fine adjustments (Manual Zoom)
Press [21].
–from k1.00 to k1.60 (in 0.01 units)
–from k1.60 to k2.00 (in 0.02 units)
≥Press and hold [21] to alter faster.[DVD-A]
 [DVD-V] (with multiple soundtracks) [RAM] [VCD]
Press [AUDIO] several times to select the 
soundtrack.
[RAM] [VCD]
You can use this button to select “L”, “R” or “LR”.
[DVD-V] (Karaoke discs)
Press [21] to select “On” or “Off ” of vocals.
Read the disc’s instructions for details.
[DVD-V] (with multiple subtitles) [VCD] (SVCD only)
[RAM] (On/Off only)
Press [SUBTITLE] several 
times to select the subtitle 
language.
To clear/display the subtitles
Press [21] to select “On” or “Off ”.
(Only when the elapsed play time can be displayed.)
Press [QUICK REPLAY] to skip back a few 
seconds.
[DVD-A]
During play or while paused
Press [SHIFT] i [PAGE].
The page changes each time you do this.
≥Press [RETURN] to go back to page 1.
Position memory
Memorizes the position to resume play.
Zoom
Expands the letterbox picture to fit the screen.
Audio
Changes the soundtrack.
Subtitle
Changes the subtitle language.
Quick replay
Replays a scene.
Page skip
Selects still pictures.
VOLUME
123
456
78
09CH
CANCEL
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
DISPLAY
AV SYSTEMVCR/AUXTV
SLEEPTUNER/BANDDV D / C D
-/--S10
PLAY 
LIST
TV VOL
TV VOLSUBWOOFER
LEVELSFCC.FOCUSSUPER SRNDMIX 2CH
   PL
C.S.MPOSITION
MEMORYZOOMAUDIO
PA G E
GROUPREPEATPLAY MODE
TEST
CH SELECTQUICK REPLAYSUBTITLE
TV/AV
SHIFT
SETUPMUTING
FL DISPLAY
SHIFT
POSITION
MEMORY
PAG EZOOM
AUDIO
SUBTITLE
QUICK
REPLAY
RETURN
342 1
ENTER
POSITION
MEMORY
ZOOMAUDIOSHIFTr
ZOOMAUDIO
SUBTITLE
QUICK REPLAY
PA G E
GROUPSHIFTr
Position memory
Zoom
Position memorized
Press PLAY to preview chaptersPress PLAY to Chapter Reviewor
 Menu
Just Fit Zoom            ˜1.00
Audio
Subtitle
Quick replay
Page skip
 Menu
Audio          1
 Menu
Subtitle Off
RQT7429-2B book.book  18 ページ  ２００４年３月４日　木曜日　午前１０時３６分
 
						

							19
RQT7429
Convenient functions
See below for details.
(Only when the elapsed play time can be displayed.
[JPEG]: Works with all JPEG content.)
During play
Press [REPEAT] several times to 
select an item to be repeated.
[RAM]
PG REPEAT’ALL REPEAT (Entire disc)’REPEAT OFF
≥During play list play
SCENE REPEAT’PL REPEAT’REPEAT OFF
[DVD-A]
TRACK REPEAT’GROUP REPEAT
§’REPEAT OFF
[DVD-V]
CHAPTER REPEAT’TITLE REPEAT
§’REPEAT OFF
[VCD]
 [CD] (There is no on-screen display.)
TRACK REPEAT’ALL REPEAT (Entire disc)’REPEAT OFF
[WMA] [MP3]
 (There is no on-screen display.)
CONTENT REPEAT’GROUP REPEAT§’REPEAT OFF
[JPEG]
 (There is no on-screen display.)
GROUP REPEAT§’REPEAT OFF
§During all group ([DVD-A]), program and random play “ALL REPEAT” 
is displayed.
∫All group play
[DVD-A]
Press [1] (play).
∫Random play
1[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
Press the numbered 
buttons to select a title 
or a group (
[WMA] [MP3] [JPEG] 
then press [ENTER]).
[DVD-A]
≥To enter all groups, press [21] to select “All” and press 
[ENTER].
≥To deselect a group, press the numbered buttons 
corresponding to the group you want to clear.
2Press [1] (play).
≥You can play a maximum of 999 audio/picture contents 
in random order.
∫Program play (up to 24 items)
1Press the numbered 
buttons to select the 
items (
[WMA] [MP3] [JPEG] 
then press [ENTER]).
≥To select a 2-digit number
e.g. To select 25:
[S10]‹[2]‹[5]
[WMA] [MP3] [JPEG] 
[2]‹[5]‹[ENTER]
≥Repeat this step to program other items.
2Press [1] (play).
To select all the items [DVD-A] [DVD-V] [WMA] [MP3] [JPEG] 
(on the disc or in the title or group)
Press [ENTER] and [34] to select “ALL”, then press [ENTER] 
again to register.
To change the program 
[DVD-A]
 [DVD-V] [WMA] [MP3] [JPEG] 
Press [34] to select an item.
– To change an item, repeat step 1.
– To clear an item, press [CANCEL] (or select “Clear” and press 
[ENTER]).
≥Press [SHIFT]i[PAGE] to skip 8 lines at a time.
[VCD] [CD]
Each time [CANCEL] is pressed, the displayed item is cleared.
To clear the whole program
[DVD-A]
 [DVD-V] [WMA] [MP3] [JPEG]
Press [3421] to select “Clear all” and press [ENTER]. 
[VCD] [CD]
While stopped, press [∫] to clear all.
The whole program is also cleared when the unit is turned off, the 
disc tray is opened or another source is selected.
[VCD] [CD] The program is retained in memory.
Repeat play
All group, random and program play
[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
[VCD] [CD] (There is no on-screen display.)
Each time you press the button while stopped:
All group ([DVD-A])>Program> Random>off (Normal play)
^---------------------------------------------------------------------}
To exit all group, program and random mode
Press [PLAY MODE] several times while stopped.
≥Disable HighMAT disc play to use random and program play. 
Select “Play as Data Disc” in Other Menu (‹page 23).
≥[DVD-A] Some discs contain bonus groups. If a password 
screen appears after selecting a group, enter the password 
with the numbered buttons to play the bonus group. Refer 
also to the disc’s jacket.VOLUME
123
456
78
09CH
CANCEL
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
DISPLAY
AV SYSTEMVCR/AUXTV
SLEEPTUNER/BANDDV D / C D
-/--S10
PLAY 
LIST
TV VOL
TV VOLSUBWOOFER
LEVELSFCC.FOCUSSUPER SRNDMIX 2CH
   PL
C.S.MPOSITION
MEMORYZOOMAUDIO
PA G E
GROUPREPEATPLAY MODE
TEST
CH SELECTQUICK REPLAYSUBTITLE
TV/AV
SHIFT
SETUPMUTING
FL DISPLAY
CANCEL
REPEATPLAY MODE
342 1
ENTER
PAG E
SHIFT
Numbered
buttons
REPEAT
PLAY MODE
Repeat play
All group, random and program play
 Menu
Repeat      Off
All Group Playback
Press PLAY to start
Random Playback
Title
Choose a title.
1
to selectPLAYto startPLAY 0  ~  9
e.g. [DVD-V]
1Title No. ChapterTime
Program Play
ENTER
PLAYto  select  and  pressto  exit
PlayClearClear all
Choose a title and chapter.
e.g. [DVD-V]
TUNEDMP3ST L R PTYDISC
SLEEP
TTL GRPD.MIX
PROG.WMA CSM RNDHDCD SFC SEQDVD-
S.SRND
RTRCK C.FCHAP DTSPLDIGITALPGMAV RCD MONO RDS PSSRSLFELSLCe.g. [CD]
Tr a c k  N o .
Program No.
RQT7429-2B book.book  19 ページ  ２００４年３月４日　木曜日　午前１０時３６分
 
						

							20
RQT7429
Using navigation menus
Using navigation menus
See below and the following page for details.
[WMA] [MP3] [JPEG]
You can play JPEG files on DVD-RAM or play HighMAT discs without 
using the HighMAT function (‹page 23, “Play as Data Disc” in 
Other Menu).
∫Using playback menus (except JPEG files on DVD-RAM)
1Press [TOP MENU].
2Press [34] to select “All”, “Audio” or 
“Picture” and press [ENTER].
≥To exit the screen
Press [TOP MENU].
∫Using navigation menus
1Press [MENU].
2Press [3421] to select the group or 
audio/picture content and press [ENTER].
≥To enjoy listening to WMA/MP3 contents while showing a 
JPEG image on the screen
Select a JPEG file first, and then select tracks.
(The opposite order is not effective.)
≥To exit the screen
Press [MENU].
1Press [TOP MENU] 
or [MENU].
2Press [34] to move through the tracks 
and press [ENTER]
.
≥Press [SHIFT]i[PAGE] to skip 10 lines at a time.
1While the menu is displayed
Press [DISPLAY].
Items shown differ depending on the type of software.
2Press [3 4] to select the sub menu and 
press [ENTER].
Playing data discs
Playing HighMAT
TM discs
Playing the programs
Playing a play list
VOLUME
123
456
78
09CH
CANCEL
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
DISPLAY
AV SYSTEMVCR/AUXTV
SLEEPTUNER/BANDDV D / C D
-/--S10
PLAY 
LIST
TV VOL
TV VOLSUBWOOFER
LEVELSFCC.FOCUSSUPER SRNDMIX 2CH
   PL
C.S.MPOSITION
MEMORYZOOMAUDIO
PA G E
GROUPREPEATPLAY MODE
TEST
CH SELECTQUICK REPLAYSUBTITLE
TV/AV
SHIFT
SETUPMUTING
FL DISPLAY
,
MENU
PLAY LIST TOP MENU
DIRECT NAVIGATOR
DISPLAY
342 1
ENTER
PAG E
SHIFT
Numbered
buttons
TOP MENUMENU
or
TOP MENUMENU
or
DIRECT 
NAVIGATOR
PLAY 
LIST
Playing data discs
To use the contents screen to find a track 
[CD] (CD text only)
Navigation  Menu
DISPLAYRETURNto  display  the  sub  menuGroup  005/023Content  0001/0004to  exit
Perfume
001 Brazilian 
002 Chinese 
003 Czech 
004 Hungarian 
005 Japanese 
006 Mexican
007 Philippine
008 Swedish
009 Piano
010 Vocal001 Lady Starfish
002 Metal Glue
003 Life on Jupiter
004 Starperson 001 My favorite1
002 My favorite2
5JPEG002 My favorite2005 Japanese 
001 Lady Starfish
CDText 
1.
2.
3.
4.
5.
6.
7.
8.
9.Ashley at Prom
10.
201
1/23
Disc Title:       All By Artist
Disc Artist:     Pink Island
Track title:      Long John Platinum
Track Artist:   SHIPWRECKED
City Penguin
Formura one
Soccer
Baseball
Neanderthal
Cartoons
Trilobites
White Dwarf
Discovery
ENTERRETURNto  select  and  pressto  exit
Using the submenu [WMA] [MP3] [JPEG]
∫Searching by content or group title [WMA] [MP3] [JPEG] 
Place the cursor on the group title to search a group, or place the 
cursor on the content title to search contents.
1 Select “Find” (‹ above).
2 Press [3 4] to select a character and press [ENTER].
≥Repeat to enter another characters.
≥Lower case is also searched.
≥Press [6 5] to skip between A, E, I, O and U.
≥Press [2] to erase a character.
≥Erase the asterisk (¢) to search for the titles starting with that 
character.
3 Press [1] to select “Find” and press [ENTER].
The search result screen appears.
4 Press [3 4] to select the content or group and press 
[ENTER].
Multi
List
Tree
Thumbnail
Next group
Previous group
All
Audio
Picture
Help display
Find
Contents only
Thumbnail images [JPEG] 
WMA/MP3 and JPEG files
WMA/MP3 files only
JPEG files only
To switch between guide messages and 
the elapsed play time indicator
To search by content or group title 
(‹below) Groups and content
To go to next groups 
[WMA] [MP3]
To go to previous groups [WMA] [MP3]
Groups only
A¢Find
Group and content 
number currently playing
: JPEG files
: WMA/MP3 files
Number currently selected
Group
Audio/picture contents
RQT7429-2B book.book  20 ページ  ２００４年３月４日　木曜日　午前１０時３６分