Panasonic Sc Ht700 Operating Instructions

							11
RQT6750
Simple setup
[HT900] (Center speaker only) [HT700] [HT690]
[Note]
The wall or pillar on which the speakers are to be attached should 
be capable of supporting 10 kg (22 Ib.) per screw.
Remove the stand. ([HT900] only)
BEFORE REMOVING THE STAND
≥Take the speaker cable out of the stand’s hole if it is threaded 
through.
≥Lay the speaker on a soft cloth.
Unscrew the screw with a Phillips-head screwdriver.
1Screw a screw (not included) into the 
wall.
2Fit the speaker securely onto the 
screw with the hole or holes.
[HT900] 
(Center speaker only) [HT700] [HT690]
Preparation
Remove the stand ([HT900] only).
Ensure the stands meet these conditions before purchasing them.
≥Observe the diameter and length of the screws and the distance 
between screws as shown in the diagram.
≥The stands must be able to support over 10 kg (22 lb.).
≥The stands must be stable even if the speakers are in a high 
position.
Notes on speaker use
≥You can damage your speakers and shorten their useful life if you 
play sound at high levels over extended periods.
≥Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When the speakers are receiving howling from a record player, 
noise from FM broadcasts, or continuous signals from an 
oscillator, test disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but 
the picture may be affected with some televisions and setup 
combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem. 
If it persists, move the speakers further away from the television.
Other speaker setup options
Attaching to a wall
Stand
30 – 35 mm
(13/16q–13/8q)
Wall‰7.5–9.4 mm
(
19/64q–3/8q)
8 – 11 mm
(
3/8q–7/16q)
Vertical Horizontal
100 mm
(3
15/16q)
Fitting speaker stands (optional)
5 mm (13/64q), pitch 0.8 mm (1/32q)
60 mm (223/64q)
Speaker stand
(not included)
Attach the stands 
with these holes.Plate thickness plus 7 to 
10 mm (plus 
9/32q to 25/64q)
Caution
≥Use the speakers only with the 
recommended system. Failure to do 
so may lead to damage to the 
amplifier and/or the speakers, and 
may result in the risk of fire. Consult 
a qualified service person if damage 
has occurred or if you experience a 
sudden change in performance.
≥Do not attempt to attach these 
speakers to walls using methods 
other than those described in this 
manual.
 
						

							12
RQT6750
Simple setup
The QUICK SETUP screen appears when you press [SHIFT]i 
[SETUP] the first time after purchase and assists you to make 
necessary settings. You can access this screen again later if you 
need to (➡page 34, Others — QUICK SETUP).Preparation
Turn on the television and select the appropriate video input on the 
television to suit the connections for the unit.
1Press [Í] to turn on the unit.
2Press [DVD/CD] to select “DVD/CD” 
as the source.
3Press [SHIFT]i[SETUP] to show the 
QUICK SETUP screen.
4Press [3, 4] to select the menu 
language and press [ENTER].
5Press [3, 4] to select “Yes” to 
continue and press [ENTER].
6Press [3, 4] to select the item and 
press [ENTER].
≥Audio Language (➡ page 34)
≥Subtitle Language (➡ page 34)
≥TV Type (➡ below)
≥TV Aspect (➡ below)
7Press [ENTER] and then [SHIFT]i 
[SETUP] to end the settings.
To return to the previous screen
Press [RETURN].
∫TV Type
Select to suit the type of television.
≥Standard (Direct View TV) (factory preset)
≥CRT Projector
≥LCD TV/Projector
≥Projection TV
≥Plasma TV
∫TV Aspect
Select “4:3” (regular) or “16:9” (widescreen) to suit your 
television.
If you have a regular 4:3 television, you can also select how video 
on some discs is shown (➡ page 34, Video — TV Aspect).
≥4:3 Pan&Scan (factory preset)
Widescreen software is expanded to fill the 
screen of a 4:3 aspect television (unless 
prohibited by the producer of the disc).
≥4:3 Letterbox
Widescreen software is shown in the 
letterbox style on a 4:3 aspect television.
STEP6QUICK SETUP
AV SYSTEM
TV/VIDEO
DISC
PAGE
GROUP
SEQUENTIAL
REPEATPLAY MODEFL DISPLAYCANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFERLEVEL
SLEEP
C.S.MZOOM
AUDIOAV EFFECTP.MEMORY
S.POSITIONSFCC.FOCUS
S.SRNDMIX 2CH
    PL
TEST
CH SELECTDR COMPQUICK REPLAYDELAY TIME
SUBTITLE
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
123
456
78
09
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING DIGITAL
AUX
S10/ENTER
SHIFT
DISC 1 DISC 2
DISC 4 DISC 5DISC 3
1
2
3, 7
4–7
RETURN
3, 7
SELECT
SETUPQUICK SETUPSelect the menu language.
ENTER    RETURN
English
Français
Español
 
						

							13
RQT6750
Getting started
Control reference guide
1Standby/on switch [Í] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2TV/VIDEO button [TV/VIDEO]. . . . . . . . . . . . . . . . . . . . . . . . . 32
3Disc select button [DISC], Disc buttons [DISC1]–[DISC5]  . . 14
4Group, Page button [GROUP, PAGE]. . . . . . . . . . . . . . . . 16, 17
5Sequential button [SEQUENTIAL] . . . . . . . . . . . . . . . . . . . . . 15
6Cancel, FL display button [CANCEL, FL DISPLAY] . . . . 19, 31
7
Play mode, Repeat button [PLAY MODE, REPEAT]. . . . . 17, 19
8Skip, Preset channel, TV channel button
[: 9, SKIP, X CH W]  . . . . . . . . . . . . . . . . . . . . . 16, 27, 32
9Basic operation buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
:Top menu, Direct navigator button 
[TOP MENU, DIRECT NAVIGATOR] . . . . . . . . . . . . . . . . . 14, 21
;Cursor buttons [3, 4, 2, 1], Enter button [ENTER] . . . . . 12
<
Display, TV volume down button [DISPLAY, TV VOLs]. . 24, 32
=Volume buttons [s, r, VOLUME]. . . . . . . . . . . . . . . . . . . . . . 14
>Sound field, sound quality buttons. . . . . . . . . . . . . . . . . 28–31
[HT900] Dolby Pro Logic II button [ÎPLII][HT700] [HT690] Dolby Pro Logic button [ÎPL]
?Custom sound memory, Sleep button [C.S.M, SLEEP] . . 30, 31
@[HT900] Position memory, AV effect button
[P.MEMORY, AV EFFECT] . . . . . . . . . . . . . . . . . . . . . . . . . 15, 29
[HT700] [HT690] 
Position memory button [POSITION MEMORY]. . 15
AShift button [SHIFT]
To use functions labeled in orange:
While pressing [SHIFT], press the corresponding button.
BChannel select, Test button [CH SELECT, TEST]  . . . . .  28, 29
CAV system standby/on button [Í, AV SYSTEM]  . . . . . . . . .  32
DSource select buttons
Face towards this unit to change the source.
Press [TV] or [VCR] first to operate a Panasonic television or 
video cassette recorder (➡ pages 32, 33).
[HT900] AUX, DIGITAL input button [AUX, DIGITAL]
[HT700] [HT690] AUX button [AUX]
ENumbered buttons [1 – 9, 0, S10/ENTER]  . . . . . . . . . . . . . . . 16
FSlow/search, Tuning buttons
[6, 5 SLOW/SEARCH]  . . . . . . . . . . . . . . . . . . . . . . . 16, 27
GMenu, Play list button [MENU, PLAY LIST] . . . . . . . . . . . 14, 21
HReturn, TV volume up button [RETURN, TV VOLr]  . . . 12, 32
IMuting, Setup button [MUTING, SETUP]  . . . . . . . . . . . . 12, 31
JAudio, Zoom button [AUDIO, ZOOM]  . . . . . . . . . . . . . . . 18, 20
K[HT900] Subtitle, Delay time button
[SUBTITLE, DELAY TIME]  . . . . . . . . . . . . . . . . . . . . . . . . 18, 30
[HT700] [HT690] Subtitle button [SUBTITLE]. . . . . . . . . . . . . . . 18
L[HT900]
 Quick replay, Dynamic range compression button
[QUICK REPLAY, DR COMP]  . . . . . . . . . . . . . . . . . . . . . . 15, 31
[HT700] [HT690] Quick replay button [QUICK REPLAY] . . . . . . 15
1Standby/on switch [Í/I, POWER]  . . . . . . . . . . . . . . . . . . . . . 12
Press to switch the unit from on to standby mode or vice versa. 
In standby mode, the unit is still consuming a small amount of power.MStandby/on indicator [Í/I]When the unit is connected to the AC mains supply, this indicator 
lights up in standby mode and goes out when the unit is turned on.
NCustom Sound Memory button [C.S.M]  . . . . . . . . . . . . . . . . 30
OProgressive out button [PROGRESSIVE] . . . . . . . . . . . . . . . 14
PSkip/search, Tuning buttons
[:/6, 5/9, X TUNING W]  . . . . . . . . . . . . . . . . . 16, 27
QSource select button [SELECTOR]
[HT900] DVD/CD>FM>AM>TV>VCR>AU X>DIGITAL IN
[HT700] [HT690] DV D / C D>FM>AM>TV>VCR>AUX
RDrawer
SStop, Tune mode button [∫, TUNE MODE] . . . . . . . . . . . 14, 27
TPause, FM mode button [;, FM MODE] . . . . . . . . . . . . . 14, 27
UPlay, Memory button [1, MEMORY]  . . . . . . . . . . . . . . . . 14, 27
VVolume control [VOLUME, DOWN, UP] . . . . . . . . . . . . . . . . . 14
WDrawer open/close button [
?
L A
BC
D
E
F
G
K
H
5
@JI
456 123
78
09
`
PHONESÍ/IPROGRESSIVEDISC EXCHANGESELECTORDISC SKIPDIGITAL INDOWNVOLUMEUPOPEN/CLOSE
C.S.M POWERDISCV.R.S M.R.S12 34 5TUNE MODE TUNINGFM MODE MEMORY
XZ] P
1
^
_\W
V UTSNOMQR
Y
[
5454
Disc tray number
Remote control
Main unit
Subwoofer
 
						

							14
RQT6750
Disc operations
Discs — Basic play
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
Preparation
≥Press [Í] to turn on the unit.
≥Turn on the television and select the appropriate video input on the 
television to suit the connections for the unit.
[1]Press [DVD/CD] to select “DVD/CD” as 
the source.
[2]Press [
						

							15
RQT6750
Disc operations
[VCD] [CD] [WMA] [MP3]
The unit usually plays the disc in the play position and then stops. 
Turn sequential play on to play all loaded discs, except for DVDs and 
JPEG discs.
While stopped
Press [SEQUENTIAL].
Each time you press the button:
SEQ on()SEQ off
[Note\
≥HighMAT menus and video CD playback control are disabled.
≥Only audio tracks can be played on HighMAT discs.
≥You cannot change the mode during program or random play.
≥Sequential Mode turns off when you switch the unit to standby.
≥Repeat function does not work when using Sequential Mode.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
Main unit only
1Press [DISC EXCHANGE].
The drawer opens and the disc in the play position comes to 
the front-left position.
2Change the disc in the front-left 
position.
3Press [DISC EXCHANGE].
The drawer closes.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
You can change the other discs without interrupting play.
Main unit only
1Press [
						

							16
RQT6750
Disc operations
Discs — Basic play
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
Press the numbered buttons to select the 
item.
Play starts from the selected item.
To select a 2-digit number
Example: To select track 23, press [S10] ➡ [2] ➡ [3].
[WMA] [MP3] [JPEG] [2] ➡ [3] ➡ [ENTER]
[Note\
≥This works only when stopped with some discs.
≥When playing DVD-Audio and you want to start play from a track in 
a different group, select the group first (➡page 17).
[DVD-A]
During play or while paused
Press [SHIFT]i[PAGE].
The page changes each time you press the button.[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
During play or while paused
Press [:] or [9].
≥Press [:/6] or [5/9] on the main unit.
[JPEG]
Press [2] or [1] for picture skip, or [3] or 
[4] for group skip.
≥Each press increases the number of skips.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
During play
Press [6] or [5].
≥Press and hold [:/6] or [5/9] on the main unit.
≥Audio will be heard during search for most discs. You can turn this 
audio off if you want to (➡ page 34, Audio — Audio during Search).
≥[DVD-V] You can slow down or speed up play (➡ page 24).
[RAM] [DVD-V] [VCD]
[DVD-A] (Motion picture parts only)
While paused
Press [6] or [5].
≥Press and hold [:/6] or [5/9] on the main unit.
[RAM] [DVD-V] [VCD]
[DVD-A] (Motion picture parts only)
While paused
Press [2] or [1].
The frame changes each time you press the button.
≥The frames change in succession if you press and hold the button.
≥Pressing [;] also activates forward frame-by-frame.
Starting play from a selected item
Selecting still pictures— Page Skip
AV SYSTEM
TV/VIDEO
DISC
PAGE
GROUP
SEQUENTIAL
REPEATPLAY MODEFL DISPLAYCANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFERLEVEL
SLEEP
C.S.MZOOM
AUDIOAV EFFECTP.MEMORY
S.POSITIONSFCC.FOCUS
S.SRNDMIX 2CH
    PL
TEST
CH SELECTDR COMPQUICK REPLAYDELAY TIME
SUBTITLE
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
123
456
78
09
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING DIGITAL
AUX
S10/ENTER
SHIFT
DISC 1 DISC 2
DISC 4 DISC 5DISC 3
SHIFT;
PAGE
342 1
ENTER
1
SLOW/SEARCH
6   5 SKIP
:  9 
Numbered
buttons
PAGE 1
Skipping items
Fast forward and rewind 
						

							17
RQT6750
Disc operations
Discs — Convenient functions
[DVD-A] [WMA] [MP3] [JPEG]
1Press [GROUP].
Example [MP3] 
2Press the numbered buttons to select 
the group and press [ENTER].
3Press the numbered buttons to select 
the track/picture number and press 
[ENTER].
[DVD-A]
Playing all the groups in succession (➡Page 19, All group play)
Playing bonus groups
Some discs contain bonus groups. If a password screen appears 
after selecting a group, enter the password with the numbered 
buttons. Refer also to the disc’s jacket.[RAM] [DVD-A] [DVD-V] [JPEG]
[VCD] [CD] [WMA] [MP3] (There is no on-screen display.)
During play
Press [SHIFT]i[REPEAT].
Each time you press the button:
[RAM]
PG REPEAT
>ALL REPEAT (Entire disc)>REPEAT OFF
≥During play list play
SCENE REPEAT
>PL REPEAT>REPEAT OFF
[DVD-V]
CHAPTER REPEAT
>TITLE REPEAT§>REPEAT OFF
[VCD] [CD]
TRACK REPEAT
>ALL REPEAT (Entire disc)>REPEAT OFF
[DVD-A] [WMA] [MP3]
TRACK REPEAT
>GROUP REPEAT§>REPEAT OFF
[JPEG]
GROUP REPEAT
>REPEAT OFF
§During all group ([DVD-A]), program and random play
“ALL REPEAT” is displayed.
≥You can also repeat play of content and group on HighMAT discs.
∫To repeat only your favorite tracks/chapters 
Start program play (➡ page 19) and press [SHIFT]i[REPEAT] to 
select the repeat mode.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
You can repeat a section between points A and B within a program, 
title or track.
1During play
Press [DISPLAY] until the unit 
information screen is displayed
(➡page 25).
2Press [3, 4] to select the play menu.
Example [DVD-V]
3Press [2, 1] to select “A-B Repeat” and
1Press [ENTER] at the starting point 
(A).
2Press [ENTER] at the finishing 
point (B).
A-B repeat starts.
To return to the normal play
Press [ENTER] again.
To clear the menus
Press [RETURN] until the menu disappears.
[Note\
A-B repeat is canceled when you press [QUICK REPLAY].
Selecting groups to play
AV SYSTEM
TV/VIDEO
DISC
PAGE
GROUP
SEQUENTIAL
REPEATPLAY MODEFL DISPLAYCANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFERLEVEL
SLEEP
C.S.MZOOM
AUDIOAV EFFECTP.MEMORY
S.POSITIONSFCC.FOCUS
S.SRNDMIX 2CH
    PL
TEST
CH SELECTDR COMPQUICK REPLAYDELAY TIME
SUBTITLE
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
123
456
78
09
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING DIGITAL
AUX
S10/ENTER
SHIFT
DISC 1 DISC 2
DISC 4 DISC 5DISC 3
SHIFT
REPEAT
DISPLAY
GROUP
342 1
ENTER
RETURN
Numbered
buttons
2
2118
Group numberTrack number in group
Repeat play
A-B repeat play
AB
OFF
A-B Repeat
A B
AB
 
						

							18
RQT6750
Disc operations
Discs — Convenient functions
≥“–” or “– –” is displayed instead of the language number in 
circumstances such as when no language is recorded on the disc.
[VCD] (SVCD only)
Soundtrack and subtitle numbers may change even if corresponding
soundtracks are not recorded.
[RAM] [DVD-A] [DVD-V] [VCD]
(Discs with multiple soundtracks)
During play
Press [AUDIO].
The number changes each time you press the button.
≥You can also use this button to turn the vocals on and off on 
karaoke discs. Read the disc’s instructions for details.
[DVD-A]
≥Play restarts from the beginning of the soundtrack when changing 
soundtracks that are accompanied by still pictures.
≥Even if a second soundtrack isn’t recorded, two soundtrack 
numbers will normally be shown when you press [AUDIO]. The 
soundtrack currently playing is number 1.Signal type/data
LPCM/PPCM/ÎDigital/DTS: Signal type
k (kHz): Sampling frequency
b (bit): Number of bits ch (channel): Number of channels
Example:
3
/2 .1ch
[DVD-A] (Motion picture parts only)
[DVD-V] [VCD] (SVCD only)
You can change the subtitle language and turn the subtitles on and off.
[RAM]
You can turn the subtitles on and off.
During play
Press [SUBTITLE].
The number changes each time you press the button.
≥In some cases, the subtitle language is not changed to the 
selected one immediately.
≥If the subtitles overlap closed captions recorded on discs, turn the 
subtitles off.
To clear/display the subtitles
1 Press [SUBTITLE].
2 Press [1]. ([DVD-A] [DVD-V] [VCD])
3 Press [3, 4] to select “OFF” or “ON”.
∫Changing the position and brightness of the 
subtitles (➡ page 26)
Soundtracks
AV SYSTEM
TV/VIDEO
DISC
PAGE
GROUP
SEQUENTIAL
REPEATPLAY MODEFL DISPLAYCANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFERLEVEL
SLEEP
C.S.MZOOM
AUDIOAV EFFECTP.MEMORY
S.POSITIONSFCC.FOCUS
S.SRNDMIX 2CH
    PL
TEST
CH SELECTDR COMPQUICK REPLAYDELAY TIME
SUBTITLE
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING DIGITAL
AUX
SHIFT
∫
DISC
DISC 1
DISC 5
342 1
ENTER
DISC 1 DISC 2
DISC 4 DISC 5DISC 3
S10/ENTER
123
456
78
09
PLAY MODE
1
SUBTITLE
AUDIO CANCEL
Numbered
buttons
192k24b 2chLPCMDigitalÎ1  1 1  English 3/2.1 ch  
[DVD-A]
[DVD-V]
Soundtrack selected
Soundtrack playingAudio languageNumber of 
channels (➡ right) Signal type/data
(➡ right)
LR>L )R
[RAM]  ]VCD] 
.1: Low frequency effect
.1:(not displayed if there is no signal)
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront rightiCenter
Subtitles
I love you
EnglishON1
Je t’aime
French ON2
Example [DVD-V]
 
						

							19
RQT6750
Disc operations
[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
[DVD-A]
The unit plays tracks in all the groups on a disc.
Press [1] (play).
You can select up to 24 items to play in the order you choose.
[VCD] [CD] (There is no on-screen display.)
You can program all the items on discs.
[DVD-A] [DVD-V] [WMA] [MP3]
You can program all the items on a disc in the play position.
1[VCD] [CD]
Press the [DISC] and then the disc 
button ([DISC 1]–[DISC 5]).
2Press the numbered buttons to select 
a title, chapter, group or track (
[WMA] [MP3] 
then press [ENTER]).
≥To select a 2-digit number
Example: To select item 25, press [S10] ➡ [2] ➡ [5].
[WMA] [MP3] [2] ➡ [5] ➡ [ENTER]
≥Repeat this step to program other items.
≥[VCD] [CD]
Step 1 is unnecessary when programming tracks on the 
same disc.≥[DVD-A] [DVD-V] [WMA] [MP3]
To select an item using the cursor buttons
Press [ENTER] and [3, 4] to select an item, then press 
[ENTER] again to register the number.
All the items in the selected disc, title or group are selected 
when you select “ALL”.
3Press [1] (play).
To add or change the program
[VCD] [CD] (Add only)
Repeat steps 1 and 2.
[DVD-A] [DVD-V] [WMA] [MP3]
Press [3, 4] to select an available item, then repeat step 2.
To clear an item
[VCD] [CD]
Press [CANCEL].
[DVD-A] [DVD-V] [WMA] [MP3]
1 Select the item you want to clear with [3, 4].
2 P ress [CANCEL], or select “Clear” with [3, 4, 2, 1] and press 
[ENTER].
To clear the whole program
[VCD] [CD]
Press [∫] so “CLEAR” is displayed.
[DVD-A] [DVD-V] [WMA] [MP3]
Select “Clear all” with [3, 4, 2, 1] and press [ENTER].
\Note\
≥[DVD-V] [WMA] [MP3]
Times are not displayed while programming.
≥[VCD] [CD]
Items the unit cannot find can be programmed but are canceled 
during play. This is also the case if you program DVD-RAM, DVD-
Audio, DVD-Video, WMA, MP3 and JPEG.
≥The program is cleared when you switch the unit to standby, select 
another source, exit the program mode by pressing [PLAY MODE] 
or move the disc out of the play position.
[VCD] [CD]
The program is retained in memory.
[VCD] [CD] (There is no on-screen display.)
1-DISC (RND): You can play a disc in the play position in random 
order.
ALL-DISC (RND): You can play all discs in random order.
[DVD-A] [DVD-V] [WMA] [MP3]
You can play items on a disc in the play position in random order.
1[DVD-A] [DVD-V]
Press the numbered buttons to select 
a title or a group.
[DVD-A]
≥You can select more than one group.
≥To enter all groups, select “All” using [2, 1] and press 
[ENTER].
≥To deselect a group, press the numbered buttons 
corresponding to the group you want to clear.
2Press [1] (play).
[Note\
During random play, empty trays are skipped and the playback 
control function on Video CDs is canceled.
\Note\
Disable HighMAT disc play to use random and program play.
In the SETUP menu, set “HighMAT” to “Disable” (➡ page 34) and perform the necessary operations (➡ above).
Common procedures for all group, program 
and random play
While stopped
Press [PLAY MODE].
Each time you press the button:
[DVD-A] [DVD-V] [WMA] [MP3]
All group ([DVD-A])>Program> Random>off (Normal play)
^-------------------------------------------------------------------------------------}
[VCD] [CD]
(PGM)>1-DISC (RND)>ALL-DISC (RND)>off (Normal play)
^------------------------------------------------------------------------------------------}
[DVD-A]
If you select bonus groups, you will have to enter a password 
(➡page 17).
All group play
Program play
PROGRAMChoose a title and chapter, then press ENTER.No TimeT
Press PLAY to startPlayClearClear all
SELECT
ENTER    RETURN
1C
SELECT
NUMBER09
Example [DVD-V]
TRCKPGM
Disc No.
Track No. Program No. Example [CD]
Random play
Random Playback
Title   1
0Press PLAY to start
RND
Example [DVD-V]
 
						

							20
RQT6750
Disc operations
Discs — Convenient functions
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
You can mark a position so you can return to it easily at a later time.
1During play
Press [DISPLAY] until the unit 
information screen is displayed
(➡ page 25).
2Press [3,  4] to select the play menu.
3Press [2,  1] to select “Marker” and  
press [ENTER].
[RAM]
Press [1] to select an asterisk (¢).
4Press [ENTER] at the point you want 
to mark.
To mark another position
Up to 5 points ([RAM] only: up to 999 points)
1 Press [1] to select “
¢”.
2 Press [ENTER] at the point.
To recall or erase a marker
1 Press [2,  1] to select a marker.
2 Press [ENTER] to recall or press [CANCEL] to erase.[RAM]
To mark the eleventh point and beyond
1 Press [2
, 1] to select the marker pin icon.
2 Press [3,  4] to select “11 – 20”.
You can select the next group when the current group is full.
[Note]
Markers added with this unit clear when you switch the unit to 
standby, change the source, or change the disc.
[RAM] [DVD-V] [VCD]
[DVD-A] (Motion picture parts only)
Change the zoom ratio so the picture expands to the optimum size to 
fill the screen.
Preparation
Change the setting “TV Aspect” to suit your television (➡ page 34).
During play
Press [SHIFT]i[ZOOM] to select the 
aspect ratio.
Each time you press the button:
4:3 Standard>European Vista>16:9 Standard
:;
Cinemascope2