Panasonic Sc Btt775 Operating Instructions

							Getting started 
21
VQT3M06
STEP 6: Easy setup
The Easy setup assists you to make necessary 
settings.
Follow the on-screen prompts to make basic settings for the 
system.
Preparation
≥Turn on your TV and select the appropriate video input mode 
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to 
this unit.
[BTT775[for[Australia[and[New[Zealand]
≥ Confirm the digital transmitter connection. ( >18)
1Press [ Í].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA) 
supporting HDAVI Control 2 or later via an HDMI cable, 
then setting information on the TV such as “On-Screen 
Language” is acquired by this unit.
2Follow the on-screen instructions and 
make the settings with [ 3,4,2,1] and 
press [OK].
Language
Select the language used on menu screen.
TV Aspect Select the aspect to suit your TV and preference.
[BTT775]  [BTT770]  [BTT370]
Wireless System If a digital transmitter is inserted,
it is required to specify the current settings.
Speakers position Specify the positioning of the surround speakers.
Speaker check Check if the connection to each speaker is valid.
Speaker Output Make surround sound setting for speaker output.
Cinema Surround Plus (Effective when the surround layout is selected in 
Speakers position.)
The function creates the sound of virtual speakers to 
enhance the realistic surround feeling as if the sound 
comes from all directions.
TV Audio Select the audio input connection from your TV,
[item with “(TV)”].
Quick Start Speed of startup from standby mode is increased.
[BTT775]  [BTT770]  [BTT370]
HDMI Standby Pass-Through Even if this unit is in standby mode, a device 
connected with this unit can output videos and sound 
to the TV. ( >18, “When the connecting devices have 
an HDMI terminal”)
3Press [OK] several times to finish the “Easy 
setup”.
After completing “Easy setup”, you can perform “Network Easy 
Setting”.
	≥ You can perform this setup anytime by selecting “Easy setup” in the Setup 
menu. ( >45)
0Á
OK
SCBTT775_770_370_270EBEPGN_VQT3M06.book  21 ページ  ２０１１年１月１８日　火曜日　午後６時１４分
 
						

							22
VQT3M06
After completing “Easy setup”, you can perform “Network Easy 
Setting”.
Select “Wired” or “Wireless” and press [OK].
∫“Wired” connection
Follow the on-screen instructions to make your connection 
settings.
≥When you experience problems ( >right)
∫“Wireless” connection
Before beginning wireless connection setup≥Obtain your network name (SSID*1).
≥ If your wireless connection is encrypted please be sure 
that you know your encryption key.
≥ [BTT270]
If “Wireless LAN Adaptor is  not connected.” is displayed, 
check that the Wireless LAN Adaptor is fully inserted. 
Alternatively, disconnect and reconn ect it. If there is still no 
change in the display, consult your dealer for advice.
Select “WPS (PUSH button)” or “Search for 
wireless network” and then follow the 
on-screen instructions and make the settings.
WPS (PUSH button):
If your Wireless router supports WPS 
(PUSH button), you can easily perform 
the settings by pressing WPS button on it.
WPS (Wi-Fi Protected Setup) is a 
standard that facilitates settings relating to 
the connection and security of wireless 
LAN devices.
1 Press WPS button or corresponding button of Wireless 
router until the lamp starts flashing.
≥For details, refer to the operating instruction of Wireless 
router.
2 Press [OK]. Search for wireless network:
≥
When you select “Search for wireless network”, the available 
wireless networks will be displayed. Select your network 
name and press [OK].
– If your network name is not  displayed search again by 
pressing the red button on the remote control.
j Stealth SSID will not be displayed when you select “Search 
for wireless network”. Enter manually by using “Manual 
setting”.
(Press [HOME]  > select “Others” > select “Setup” > select 
“Network”  > [OK]  > select “Network Settings”  > [OK]  > 
select “Wireless Settings”  > [OK]  > select “Connection 
Setting” > [OK] > select “Manual setting” > [OK])
≥ If your wireless network is encrypted, Encryption Key input 
screen will be displayed.
Input the encryption key of your network.
*1An SSID (Service Set IDentification) is a name used by wireless LAN to 
identify a particular network. Transmission is possible if the SSID matches 
for both devices.
*2Wi-Fi Protected Setup-compatible Wireless router may have the mark.
Wireless Settings
Network Easy Setting
OKRETURN
Network Easy Setting
Wired
Wireless
Select a connection mode. 
 Current setting  :  Wired
 
LAN cable connection:
 Connect a LAN cable to the unit and select "Wired."
Wireless LAN connection:
 Select "Wireless."
e.g.,  [BTT775]  [BTT770]  [BTT370]
Wireless Settings
Select a connection method to wireless access point.
Please refer to the operating instructions of your wireless 
access point about connection methods.
Search for wireless network
WPS (PUSH button)
*2
e.g.,
When you experience 
problems with settings
DisplayCheck the following
A conflict with other 
devices occurred. ≥
Please wait a few moments, and 
then try again.
A time out error 
occurred. ≥
Setting of the Wireless router for 
MAC Address etc.
≥ The signal may be weak.
[BTT270]
Using the USB extension cable 
supplied with the Wireless LAN 
Adaptor, adjust the position of the 
Wireless LAN Adaptor.
≥ The SSID and the encryption key 
of the Wireless router.
≥ Please wait a few moments, and 
then try again.
An authentication 
error or a time out 
error occurred.
A device error 
occurred.
≥
[BTT270]
Connection of Wireless LAN 
Adaptor
≥ If there is no improvement in 
symptom, consult your dealer.
OK
Wireless Settings
Failed to complete.
A conflict with another device occurred.
Do you want to configure wireless network connection
setting again ?
Yes No
SCBTT775_770_370_270EBEPGN_VQT3M06.book  22 ページ  ２０１１年１月１８日　火曜日　午後６時１４分
 
						

							Getting started 
23
VQT3M06
Network Easy Setting (Home Network Connection Check)
Network Easy Setting (Internet Connection Test)	≥Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in 
the Setup menu. ( >44)
≥ You can redo these settings individually using “Network Settings”. ( >44)
≥ Do not use this unit or Wireless LAN adaptor to connect to any wireless 
network for which you do not have usage rights.
During automatic searches in a wireless network environment, wireless 
networks (SSID) for which you do not have usage rights may be 
displayed; however, using these networks may be regarded as illegal 
access.
≥ After performing network settings on this unit, the settings (encryption level, 
etc.) of the Wireless router might change.
When you have trouble getting online on your PC, perform the network 
settings on your PC in accordance with the settings of Wireless router.
≥ Please be aware that connecting to a network without encryption may 
result in the content of the communication being illegitimately viewed by a 
third party, or the leaking of data such as personal or secret information.
DisplayCheck the 
following
1. LAN cable connection or 
Wireless Settings :Fail≥
Connection of 
the LAN 
cables ( >19)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or 
Wireless Settings :Pass≥
Connection 
and settings 
of the hub 
and router
≥ Settings of 
“IP Address / 
DNS 
Settings” 
(> 45)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or 
Wireless Settings
:Pass
2. IP address setting :Pass or 
Home 
network 
available
3. Connection to gateway :Fail
DisplayCheck the following
Cannot find the server.
(B019) ≥
“Primary DNS” and “Secondary 
DNS” settings of “IP Address / 
DNS Settings” ( >45)
Failed to connect to the 
server.
(B020) ≥
The server may be busy or the 
service may have been 
suspended. Please wait a few 
moments, and then try again.
≥ Settings of “Proxy Server 
Settings” ( >45) and the router.
OK
Network Easy Setting (Home Network Connection Check)
YesNo
Complete.
1. LAN cable connection         
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. 
Select “No” and press [OK]
to finish Network Easy Setting.
 : Fail
 : Fail
 : Fail
OK
Network Easy Setting (Internet Connection Test)Complete.
- Connection to the Internet       :   Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the countermeasure for it.
Press [OK].
SCBTT775_770_370_270EBEPGN_VQT3M06.book  23 ページ  ２０１１年１月１８日　火曜日　午後６時１４分
 
						

							24
VQT3M06
Occasionally, Panasonic may release updated firmware for this 
unit that may add or improve the way a feature operates. 
These updates are available free of charge.
This unit is capable of checking the firmware automatically 
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following 
message is displayed.
To update the firmware
Press [HOME]  > select “Others”  > select “Setup”  > 
select “Others”  > [OK]  > select “Firmware Update”  > 
[OK]  > select “Update Now”
DO NOT DISCONNECT the unit from the AC power or perform 
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the 
unit’s display. Unit will restart and the following screen will be 
displayed.
	≥ If downloading on this unit fails or this unit is not connected to the 
Internet, then you can download the latest firmware from the 
following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 45, “System 
Information”)
≥ Downloading will require several minutes. It may take longer or may 
not work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic 
Update Check” to “Off”. ( >45)
If you have more than one Panas onic player/recorder and the 
remote control operates both products at once, you will need to 
change the remote control code  on one product to prevent this 
occurrence. ( >45, “Remote Control”)
Inserting or removing 
media
≥When inserting a media item, ensure that it is facing the right 
way up.
≥ While the reading indicator is displayed, do not turn off the 
unit or remove the media. Such action may result in loss of 
the media’s contents.
≥ When removing the SD card, press on the centre of the card 
and pull it straight out.
≥
If the USB device is not recognized by the main unit, disconnect 
the USB device from the main unit and reconnect it.
≥ It may take some time to be recognized by the main unit.
≥ Insert the USB device directly into the USB port. Do not use 
any USB extension cable.
∫ Selecting the source by the remote 
control
	≥Items to be displayed may vary with the media.
≥ When the selector is switched, it may take time to playback the selected 
video and/or audio.
*1 “(TV)” is displayed next to items set for TV AUDIO input.
*2 “(CABLE/SATELLITE)” is displayed next to DIGITAL IN when set for  CABLE/SATELLITE AUDIO input.
Firmware updates
Reprogramming the remote 
control
New firmware is available.
Please update firmware in Setup.
The firmware has been updated.
Current Version:x.xx
RETURNOK
ButtonSource
Select disc drive or SD card drive
BD/DVD or SD card (SD) ( >27)
Select iPod/iPhone, FM tuner or 
external audio as the source
iPod (IPOD) ( >36)
FM Radio (FM) ( >33)
To enjoy sound from the TV ( >34)
AUX
*1
ARC*1
DIGITAL IN*1 ( D-IN)
To enjoy sound from other devices 
(> 34)
DIGITAL IN
*2 (D-IN)
[BTT775]  [BTT770]  [BTT370]
HDMI IN1/HDMI IN2 ( >18)
SD CARD
VOLOPEN/CLOSE
DISC/SD
iPodRADIO/EXT-IN
SCBTT775_770_370_270EBEPGN_VQT3M06.book  24 ページ  ２０１１年１月１８日　火曜日　午後６時１４分
 
						

							Getting started 
25
VQT3M06
HOME menu
Major functions of this unit can be operated from the HOME 
menu.
Preparation
Turn on the television and select the appropriate video input on 
the television.
1Press [Í] to turn on the unit.
2Press [3,4, 2,1] to select the item and 
press [OK].
≥ When a media is inserted, contents selection screen for 
that media is displayed.
≥ If there are any other items, repeat this step.
≥ To return to HOME menu, select “HOME” or press 
[RETURN] several times.
To show the HOME menu
Press [HOME].
	≥Items to be displayed may vary with the media.
≥ When the selector is switched, it may take time to playback the selected 
video and/or audio.
*1 “(TV)” is displayed next to items set for TV AUDIO input.
*2 “(CABLE/SATELLITE)” is displayed next to DIGITAL IN when set for  CABLE/SATELLITE AUDIO input.
Home Cinema
HOME
OK Videos Music
Photos
EXT IN
FM Radio
Sound Others
iPod
Network
Videos/
Photos/
Music
Disc
Play back the contents. 
(> 27, 30, 32)
≥ When multiple contents 
are recorded, select the 
types of contents or the 
title.
SD card
USB
Network
Internet 
Content
Displays the Home screen 
of VIERA CAST (>
38)
Home Network (> 39)
iPod All
(> 36)
Music
Videos
FM 
Radio To enjoy the FM radio (
>33)
EXT IN AUX
*1When using an Audio cable
ARC
*1When using an HDMI cable
(Available when using an 
ARC compatible TV)
DIGITAL IN*
1, 2When using an Optical 
digital audio cable
[BTT775]  [BTT770]  
[BTT370]
HDMI IN1
HDMI IN2 When connecting to HDMI 
IN1 and/or HDMI IN2 
terminal (
>18)
Sound Select sound quality (equalizer). ( >26)
Others Setup
(> 41)
SD Card 
Management (
> 29)
Wallpaper Changes the screen 
background of HOME 
menu.
SCBTT775_770_370_270EBEPGN_VQT3M06.book  25 ページ  ２０１１年１月１８日　火曜日　午後６時１４分
 
						

							26
VQT3M06
Enjoying sound effects 
from all speakers
1Press [SURROUND] several times to select 
the effect.
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CHANNEL
You can enjoy sound from the front speakers, as well as 
the surround even when playing a 2-channel sound or 
non-surround sound.
MANUAL
≥ The selected effect will only be displayed on the main 
unit.
2While “MANUAL” is displayed, press 
[2, 1] and select the desired effect.
DOLBY PRO LOGIC II MOVIE
Suitable for movie software, or the one recorded in Dolby 
Surround.
(except DivX)
DOLBY PRO LOGIC II MUSIC
Adds 5.1-channel effects to stereo sources.
(except DivX)
7.1CH VIRTUAL SURROUND
You can enjoy 6.1/7.1-channel surround-like effect using 
5.1-channel speakers.
SUPER SURROUND
You can enjoy sound from all speakers with stereo 
sources.
2CH STEREO
You can play any source in stereo. Sound will be output to 
the front speakers and the subwoofer only.
≥When you set to “7.1CH VIRTUAL SURROUND”, 
“SUPER SURROUND” and “2CH STEREO”, “Cinema 
Surround Plus” ( >41)  is not activated.
∫ Adjusting speaker level during play
1 Press and hold [ jCH SELECT] to activate the speaker 
setting mode.
2 Press [ jCH SELECT] several times to select the speaker.
Each time you press the button:
* When the optional surround back speakers are connected. L R: Front speaker(left and right: only the balance is adjustable.)
≥Press [ 2,1] to adjust the balance of the front 
speakers.
C: Centre speaker
RS: Surround speaker (right)
RB*: Surround back speaker (right)
LB*: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer ≥
The channels not included in the playing audio will not 
be displayed (subwoofer is di splayed even if it is not 
included).
3 Press [ 3] (increase) or [ 4] (decrease) to adjust the 
speaker level for each speaker.
s6 dB to  r6 dB
∫ Changing the sound modes
1 Press [SOUND] several times to select the mode.
≥The selected mode will only be displayed on the main 
unit.
2 While the selected mode is displayed
Press [ 2,1 ] and select the desired setting.
EQUALIZER You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUBWOOFER LEVEL You can adjust the amount of bass.
1 (Weakest effect) to  4 (Strongest effect)
≥The setting you make is retained, and recalled every  time you play the same type of source.
H.BASS You can enhance low-frequency sound so that heavy 
bass sound can be heard clearly, even if the acoustics of 
your room are not optimal.
≥The setting you make is retained, and recalled every time you play from the same type of source.
CENTER FOCUS
(Effective when playing audio containing centre 
channel sound.) You can make the sound of the centre speaker seem like 
it is coming from within the TV.
WHISPER-MODE SURROUND
You can enhance the surround effect for low volume 
sound. (Convenient for late night viewing.)
	≥ The sound effects/modes may not be available or have no effect with some 
sources.
≥ You may experience a reduction in sound quality when these sound 
effects/modes are used with some sources. If this occurs, turn the sound 
effects/modes off.
Enjoying surround sound 
effects
      L R  C RSRB* LB*LS SW
\
\
\b
SCBTT775_770_370_270EBEPGN_VQT3M06.book  26 ページ  ２０１１年１月１８日　火曜日　午後６時１４分
 
						

							Getting started 
Playback
27
VQT3M06
Playb ack
Playing video contents
[BD]  [DVD]  [CD]  [SD]  [USB]
1Insert the media.
When the contents menu is displayed, press 
[3 ,4 ,2, 1] to select the item. ( >25)
2Press [ 3,4] to select the title and press 
[OK].
When a message screen is displayed while playing back 3D 
compatible video software, play back in accordance with the 
instructions.
∫ To show menus
You can display Top Menu, DIRECT NAVIGATOR or Pop-up Menu.Press [POP-UP MENU, TOP MENU].
≥Press [ 3,4, 2,1 ] to select the item and press [OK].
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is 
currently being played. Each time you press [STATUS], the 
display information may change or will disappear from the 
screen.
	≥Signal from PAL discs is output as PAL. Signal from NTSC discs is output 
as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC 
Contents Output” for NTSC discs. ( >42)
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press 
[∫STOP] when you have finished playback to protect the unit’s motor, your 
television screen and so on.
≥ Depending on media and contents, the display may change or may not 
appear.
≥ DivX and MKV: Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have been 
dragged and dropped, copied and pasted to the media.
These functions may not work depending on the media and 
contents.
Press [ ∫STOP].
The stopped position is memorised.
Resume play function
Press [ 1PLAY] to restart from this position.
≥ The position is cleared if t he tray is opened or you press 
[ ∫ STOP] several times to display “STOP” on the unit’s 
display.
≥ On BD-Video discs including BD-J, the resume play 
function does not work.
Press [ ;PAUSE].
≥Press [ ;PAUSE] again or [ 1PLAY] to restart play.
Search
While playing, press [SEARCH 6] or 
[SEARCH 5].
≥Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH 6] or 
[SEARCH 5].
≥BD-Video and AVCHD: Forward direction [SEARCH 5] 
only.
The speed increases up to 5 steps.
≥ Press [ 1PLAY] to revert to normal playback speed.
While playing or paused, press [ :] or [9 ].
Skip to the title, chapter or track you want to play.
≥Each press increases the number of skips.
While paused, press [ 2] (2;) or [1] (;1 ).
≥Press and hold to change in succession forward or 
backward.
≥ Press [ 1PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [ 1] (;1 ) only.
PLAYBD-Video T1     C1     0:05.140:20.52
Current position
e.g. BD-Video
To t a l  t i m e
Elapsed time in the title
T: Title, C: Chapter, PL: Playlist
Other operations during play
Stop
Pause
Search/Slow-motion
Skip
Frame-by-frame
SCBTT775_770_370_270EBEPGN_VQT3M06.book  27 ページ  ２０１１年１月１８日　火曜日　午後６時１４分
 
						

							28
VQT3M06
Press [AUDIO].
You can change the audio channel number or soundtrack 
language, etc.
∫ Selecting the type of audio from the 
DIGITAL AUDIO IN terminal
Select to suit the type of audio from the DIGITAL IN terminal on 
the main unit.
1 Press [EXT-IN] several times to select “DIGITAL IN” (D-IN).
2 Press [AUDIO].
M1
M2
M1rM2 (stereo audio)
(Only works with Dolby Dual Mono)
≥ “M1” or “M2” is not availabl e if “On” is selected in 
“PCM-Fix” of “DIGITAL IN”. ( >43)
	≥Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not 
output from the HDMI AV OUT terminal.
1Press [OPTION].
2Select an item and press [OK].
While DIRECT NAVIGATOR screen is displayed
While playing
≥Depending on the played contents if you perform “Screen 
Aspect”, there may be no effect.
≥ When “TV Aspect” ( >43) is set to “4:3” or “4:3 Letterbox”, 
the “Zoom” effect in “Screen Aspect” is disabled.
	≥ Depending on the media and contents, displayed items are different.
∫ Displaying subtitle text
You can display subtitle text on the DivX and MKV video disc 
with this unit.
The operation might be different or it may not operate properly 
depending on the way the file was made or the state of this unit 
(playing, stopped, etc.).
Set “Subtitle” in “Disc” ( >40)
	≥DivX and MKV video files that do not display “Text” do not contain subtitle 
text.
≥ If the subtitle text is not displayed correctly, try changing the language 
settings. ( >42)
≥ This function has no relation to the subtitles specified in DivX standard 
specifications and has no clear standard. 
Changing audioUseful functions
Properties To display the title properties (recording 
date, etc.).
Chapter 
View
To select the chapter.
View 
PlaylistsTo play playlists.
View Titles
To select the title.
FolderTo switch to another folder.
Screen 
AspectWhen black bars are shown at the top, 
bottom, left and right sides of the screen, 
you can enlarge the image to fill the screen.
Top Menu
To display Top Menu.
Pop-up 
MenuTo display Pop-up Menu.
MenuTo display Menu.
3D Settings
2D video can be virtually output as 3D, or 
output effect of the 3D video can be setup. 
(>
31)
SCBTT775_770_370_270EBEPGN_VQT3M06.book  28 ページ  ２０１１年１月１８日　火曜日　午後６時１４分
 
						

							Playback
29
VQT3M06
BD-Live allows you to enjoy more functions such as subtitles, 
exclusive images and online games by connecting this unit to 
the Internet. Since most of the BD-Live compatible discs are 
played back using the BD-Live function, additional contents 
are required to be downloaded into  the external memory (local 
storage).
≥ This unit uses an SD card as  a local storage device. BD-Live 
function cannot be used when there is no SD card inserted.
1Perform network connection and settings. 
( > 19, 22)
2Insert an SD card with 1 GB or more free 
space.
3Insert the disc.
∫Deleting data/Formatting SD cards
If you no longer need data recorded on the SD card, you can 
delete data with the following operation.
1 Insert an SD card.
2 Press [HOME].
3 Press [ 3,4, 2,1] to select “Others” and press [OK].
4 Press [ 1] to select “SD Card Management” and press 
[OK].
5 Press [ 3,4] to select “BD-Video Data Erase” or “Format 
SD Card” and press [OK].
6 Press [ 2,1] to select “Yes” and press [OK].
7 Press [ 2,1] to select “Start” and press [OK]. To turn on/off secondary video
Press [PIP].
A
Secondary video
B Primary video
To turn on/off secondary audio
[DISPLAY] >  select “Disc” > [1] >  select 
“Signal Type” > [OK] >  set “Soundtrack” in 
“Secondary Video” to
 “On” or “Off”
	≥ The usable functions and the operating method may vary with each disc, 
please refer to the instructions on the disc and/or visit their website.
≥ Some BD-Live content available on the Blu-ray discs may require an 
Internet account to be created in order to access the BD-Live content. 
Follow the screen display or instruction manual of the disc for information 
on acquiring an account.
≥ To use BD-Live function, it is recommended that you format the card on this 
unit. If the SD card you use is formatted, all data on the card will be erased. 
It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs 
(> 42).
≥ When discs supporting BD-Live are played back, the player or disc IDs 
may be sent to the content provider via the Internet.
≥ During search/slow-motion or frame-by-frame, only the primary video is 
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”, 
secondary audio will not be played ( >42).
Enjoying BD-Live or 
picture-in-picture in BD-Video
Enjoying BD-Live discs with 
Internet
SD Card Management
No. of Files    6
Free space    300 MB
SD CARD
Format this SD Card.
BD-Video Data Erase
Format SD Card
OKRETURN
Playing picture-in-picture


SCBTT775_770_370_270EBEPGN_VQT3M06.book  29 ページ  ２０１１年１月１８日　火曜日　午後６時１４分
 
						

							30
VQT3M06
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is an 
official DivX Certified® device that plays DivX video. Visit 
divx.com for more information and software tools to convert 
your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play 
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section 
in your device setup menu.
Go to vod.divx.com for more information on how to complete 
your registration.
≥ Video images of the copyright-protected DivX contents 
stored on USB device can be output only through the HDMI 
output terminal.
Display the unit’s registration code.
(> 45, “DivX Registration” in “Others”)
A 10 alphanumeric characters
≥ After playing DivX VOD content for the first time, the 
registration code is not displayed.
≥ If you purchase DivX VOD cont ent using a registration code 
different from this unit’s code, you will not be able to play this 
content.
Cancel the unit’s registration.
(> 45, “DivX Registration” in “Others”)
Press [ 2,1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in 
www.divx.com.
Regarding DivX VOD content that can only be 
played a set number of times
Some DivX VOD contents can only be played a set number of 
times. When you play this cont ent, the number of times already 
played and initially playable number of times is displayed.
≥ The remaining number of pl ays decreases each time a 
programme is played. However, when playing from the point 
where play was previously stopped, the remaining number of 
plays does not decrease due to the resume play function.
Playing music
[DVD]  [CD]  [USB]
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1Insert the media.
When the contents menu is displayed, press [ 3,4 ,2, 1] 
to select the item.( >25)
2Press [ 3,4] to select the track and press 
[OK].
To exit the screen
Press [RETURN].
1While DIRECT NAVIGATOR screen is displayed
Press [OPTION].
2Press [ 3,4] to select “Select Folder” and 
press [OK].
	≥ You cannot select folders that contain no compatible tracks.
Regarding DivX
DivX Registration
You must register this unit to play
protected DivX videos.
The registration code is necessary to
register this unit.
Registration Code: XXXXXXXXXX
Please register at www.divx.com/vod/
Playing a track in another 
folder
 0.09  4.30
01
02
03
04
05
DIRECT NAVIGATORMusic list
CD
No. Track Name Play Time
Track1
Track1 4min30sec 
3min41sec 
4min30sec 
3min11sec 
5min  2sec 
Track2
5 Tracks / Total Play Time 20min54sec
Track3
Track4
Track5
Play
RETURN
“ ” indicates the track currently playing.
SCBTT775_770_370_270EBEPGN_VQT3M06.book  30 ページ  ２０１１年１月１８日　火曜日　午後６時１４分