Panasonic Sc Btt270 Owners Manual

							Advanced operations
41
VQT3D27
Delay time
For optimum listening with 5.1-channel sound, all the 
speakers, except for the subwoofer, should be the same 
distance from the seating position.
If either distance A or  B  is less than  C, find the difference in 
the relevant table and adjust the delay time to make up for the 
difference.
A B C : Primary listening distance
A Approximate room dimensions
B Actual speaker position
C Ideal speaker position
D Circle of constant primary listening distance
1Press [ 3,4, 2,1] to select the distance 
box ( ) and press [OK].
e.g., 5.1ch setting
A Center (C)
B Left Surround (LS), Right Surround (RS)
e.g.,  [BTT770]  [BTT370]  7.1ch setting
C Left Surround back (LB), Right Surround back (RB)
2Press [ 3,4] to select the setting and press 
[OK].
A Center speaker B
Surround speaker / Surround back speaker
[BTT770]  [BTT370]
∫ When using the 7.1ch speaker system
1 Check the distance difference of both the front speakers 
and the surround back speakers from the seating position.
2 Set the delay time of the surround back speakers.
Volume (Channel balance) ( )
(Effective when playing multi-channel audio)
1Select “Test” and press [OK].
A test signal is output.
2While listening to the test signal
Press [ 3,4] to adjust the volume of each 
speaker.
The volume can be adjusted between  r6 dB to s6 dB.
≥ Set each speaker level according to the volume of the 
Front (L) and Front (R) speaker volume respectively.
3Press [OK].
The test signal stops.
e.g., 5.1ch setting
A Center (C)
B Te s t
C Left Surround (LS), Right Surround (RS)
To finish the speaker setting
Press [ 3,4, 2,1 ] to select “Complete” and press [OK].
Speaker settings
DifferenceSetting
Approx. 34 cm (1 ft. 1 in.)1.0 ms
Approx. 68 cm (2 ft. 2 in.)2.0 ms
Approx. 102 cm (3 ft. 4 in.)3.0 ms
Approx. 136 cm (4 ft. 5 in.)4.0 ms
Approx. 170 cm (5 ft. 6 in.)5.0 ms
: 
: L
LS
R
SW
C
RS
C
RSLS
A
B
C
A
B
C
D
0.0ms
0
00
0.0
0.0ms
CompleteTe s t
LS R
L
RS
dB
dB
dB
msC
0dBSW


0
00
0.0
0.0
0.000dB
dBmsRB
LB
ms
CompleteTe s t
LS R
L
RS
dB
dB
dB
msC
0dBSW

DifferenceSetting
Approx. 170 cm (5 ft. 6 in.)5.0 ms
Approx. 340 cm (11 ft. 1 in.)10.0 ms
Approx. 510 cm (16 ft. 8 in.)15.0 ms
Adjusting speaker level
dB0
0
00
0.0
0.0ms
CompleteTe s t
LS R
L
RS
dB
dB
dB
msC
0dBSW



SC-BTT770_370_270P_eng.book  41 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分
 
						

							42
VQT3D27
Optional speaker  settings
Speaker installation 
option
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached 
should be capable of supporting 10 k g (22 lbs) per screw. 
Consult a qualified building contractor when attaching the 
speakers to a wall. Improper attachment may result in 
damage to the wall and speakers.
≥ Do not attempt to attach these speakers to walls using 
methods other than those described in this manual.
1Drive a screw (not supp lied) into the wall.
2Fit the speaker securely onto the screw(s) 
with the hole(s).
Use the measurements indicated below to identify the 
screwing positions on the wall.
≥Leave at least 20 mm (
25/32q) of space above the speaker and 
10 mm (13/32q ) on each side to allow enough space for fitting 
the speaker.
[BTT770]  [BTT370]  [BTT273]
Front speaker
Attach to a wall without the base and the stand. F
28.5 mm (1 
1/8q)
G 97 mm (3 13/16q)
H 335 mm (13 3/16q)
I 210 mm to 212 mm 
(8 
9/32q to 8 11/32q)
J 40 mm (1 9/16q)
K 63 mm (2 15/32q)
L 322 mm (12 11/16q)
M 40 mm (1 9/16q)
N 17.6 mm (11/16q)
O 98.7 mm (3 7/8q)
[BTT770]
Center speaker
P 18.8 mm (
3/4q)
Q 117 mm (4 19/32q)
R 209 mm to 211 mm 
(8 
7/32q to 8 5/16q)
S 97 mm (3 13/16q)
T 23 mm (29/32q)
U 95 mm to 97 mm 
(3 
3/4q to 3 13/16q)
V 26 mm (1 1/32q)
W 16.7 mm (21/32q)
X 63.7 mm (2 1/2q)
[BTT770]  [BTT370]  [BTT273]
∫ To avoid speaker dropping
Front speaker, Center speaker
e.g.,  [BTT770] Front speaker
≥ Consult a qualified building contractor to avoid damage to 
the wall or speakers.
≥ Use a string of less than  ‰ 2.0 mm (
3/32q), which is capable of 
supporting over 10 k g (22 lbs).
Attaching to a wall
A At least 30 mm (1 3/16q)
B ‰ 4.0 mm (5/32q)
C ‰ 7.0 mm to  ‰ 9.4 mm 
(
9/32q  to 3/8q)
D Wall or pillar
E 5.5 mm to 7.5 mm 
(
7/32q to 5/16q)
e.g.,  [BTT770]  Front speaker
DO NOTDO
≥In this position, the 
speaker will likely fall if 
moved to the left or right.≥Move the speaker so that 
the screw is in this 
position.

 



\b
 
 \f
\f
[BTT770] [BTT370]
[BTT273]




[BTT770]
 [BTT370]  [BTT273]
Surround speaker
[BTT270]
Front speaker, 
Surround speaker







[BTT370]
 [BTT270]  [BTT273]
Center speaker



A String (not supplied)
B Screw eye (not supplied)
C Less than 10 cm (3 
15/16q)
D Rear of the speaker
VQT3D27~Body_mst.fm  42 ページ  ２０１１年１月６日　木曜日　午後１時４０分
 
						

							ReferenceOptional speaker 
settings
43
VQT3D27
Reference
Troubleshooting guide
Before requesting service, please perform the 
following steps.
The following do not indicate a problem with this unit:
jRegular disc rotating sounds.
jImage disturbance during search.
jImage disturbance when replacing 3D discs.
∫Unit does not respond to the remote 
control or front panel buttons.
Press and hold [POWER Í/I] on the main unit for 5 seconds.
jIf still unable to power the unit off, disconnect the power cord,  wait 1 minute, then reconnect the power cord.
∫ Cannot eject disc.
The unit may have a problem.
While the unit is off, press and hold [ 9] on the remote 
control and [  40)
To return all settings to the factory preset
≥Reset the unit as follows:
While the unit is off, press and hold [+ VOLUME], [ 9)
≥ The remote control and main unit are using different codes. If 
“SET  ” is displayed on the unit’s display when a button is 
pressed on the remote control, change the code on the 
remote control. ( >40)
Disc cannot be played.
≥The disc is dirty. ( >9)
≥Check the region code.
Still pictures (JPEG) do not playback normally.
≥The images that were edited on the PC, such as Progressive 
JPEG, etc., may not playback.
The TV tuner mode is not displayed when the TV is 
switched on.
≥This phenomenon may occur, depending on the TV setting, 
when “Quick Start” is set to “On”.
≥ Depending on the TV, this phenomenon may be prevented 
by reconnecting the HDMI cable to a different HDMI input 
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], [B] and [Y] on the 
remote control at the same time for more than 5 seconds.
j“00 RET” is displayed on the unit’s display.
2Repeatedly press [1] (right) on the remote control or 
[POWER Í/I] on the unit until “03 VL” is displayed on the 
unit’s display.
3 Press [OK] on the remote control or [ 18)
The unit switches to standby mode.
≥This unit will automatically turn to standby mode after 30 
minutes if it is inactive. ( >7)
≥ When the time set for the sleep timer has passed, the power 
will be turned off. ( >6)
≥ One of the unit’s safety devices is activated. Press 
[POWER Í/I] on the main unit to turn the unit on.
This unit is turned off when the input for the TV is switched.
≥This is a normal phenomenon when using VIERA Link 
(HDAVI Control 4 or later). For details please read the 
operating instructions for the TV.
The unit does not turn off.1Press and hold [POWER Í/I] on the main unit for 5 seconds. 
(If still unable to power the unit off, disconnect the power 
cord, wait 1 minute, then reconnect the power cord.)
2 Reset the unit as follows:
While the unit is off, press and hold [+ VOLUME], 
[< OPEN/CLOSE] and [POWER Í/I] on the main unit at 
the same time for more than 5 seconds.
The display is dim.
≥ Change “Front Panel Display” in the Setup menu. ( >38)
Do you have the latest firmware installed?
Firmware updates may be released to correct operating 
irregularities that are discovered with certain movies. ( >22)
4
Make the following checks and visit our 
website for more information.
For U.S.A. : 
http://www.panasonic.com/help
Enter the model number.
For Canada : 
http://www.panasonic.ca
4
Or visit our website to find a service 
center.
You can find a service center near you easily on our website.
Other support information:
“Customer Services Directory (United States and Puerto 
Rico)” ( >50) or “Limited Warranty (Only for CANADA)” 
( > 51)
General operation
Power
Displays
VQT3D27~Body_mst.fm  43 ページ  ２０１０年１２月２４日　金曜日　午後６時４８分
 
						

							44
VQT3D27
The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
≥An incorrect resolution is selected in “HDMI Resolution”. 
Reset the setting as follows:
1 While the unit is on, press and hold [OK], [B] and [Y] on the 
remote control at the same time for more than 5 seconds.
j“00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or 
[POWER Í/I] on the unit until “04 PRG” is displayed on 
the unit’s display.
3 Press and hold [OK] on the remote control or [ 39)
j When Dolby Digital Plus, Dolby TrueHD, and DTS-HD 
audio are not output in bitstream, select “Yes” in “Restore 
Default Settings” and make proper settings. (> 40)
≥ When “3D BD-Video Playback” in the Setup menu is set to 
“Automatic”, images may not be output depending on the 
connection method. After removing the disc from this unit, 
select “Set before play” in the Setup menu, and select “2D 
Playback” in the setup screen displayed when playing 3D 
discs. ( >37)
Video is not output.
≥Set “High Clarity Sound” in the  Playback menu to “Off” to use 
the VIDEO OUT terminal. ( >36)
Video is not output in high-definition.
≥Confirm that “HDMI Resolution” in the Setup menu is set 
properly. ( >39)
3D video is not output.
≥Are the settings on this unit and the TV correct? ( >27)
3D video is not output correctly as 2D.
≥Select “Set before play” in the Setup menu, and select “2D 
Playback” in the setup screen displayed when playing 3D 
discs. ( >37)
≥ Discs that have recorded titles with Side by side (2 screen 
structure) and that can be enjoyed in 3D are played back in 
accordance with the settings of the TV.
No subtitles.
≥When progressive output is on, closed captions/subtitles 
cannot be displayed.
The subtitles overlap closed captions recorded on discs.
≥Turn off the subtitles or turn off the closed caption setting on 
the TV.  (> 35)
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
≥Confirm the “TV Aspect” is set properly. ( >39)
≥ Adjust the aspect setting on the television. No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
≥
Check connections to speakers and other equipment. 
(> 10, 11, 13s18)
≥
Ensure the speaker settings for your speakers are correct. (>41)≥To output audio from a device connected with an HDMI cable, 
set “HDMI Audio Output” to “On” in the Setup menu. (>39)≥ When “BD-Video Secondary Audio” is set to “On”, Dolby 
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and 
DTS-HD High Resolution Audio are output as Dolby Digital 
or DTS Digital Surround.
≥ Re-master will not work when the bitstream signal is output 
from the HDMI AV OUT terminal. ( >36)
≥ Depending on the connected equipment, the sound may be 
distorted if this unit is connected with an HDMI cable.
≥ The multi-channel audio from a device connected to the TV 
is not output in it’s original multi-channel form.
jIf the device has an optical audio output terminal, connect 
the device to this unit’s “OPTICAL” terminal. ( >15, 16, 30)
No surround sound.
≥Press [SURROUND] to select a surround effect. ( >24)
≥ [BTT770]  [BTT370]
(When using the 7.1ch speaker system)
Audio is not available from  the surround back speakers even 
though Dolby Pro Logic II turns on.
Cannot switch audio.
≥ When audio is output from the HDMI AV OUT terminal, set 
“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to 
“PCM”. ( >38)
No sound from the TV.
≥Press [EXT-IN] to select the corresponding source. ( >22)
≥
When connecting the unit to a TV using an HDMI cable, check 
whether the HDMI terminal on the TV is labeled “HDMI (ARC)”. 
If not labeled in this way, connect using the HDMI cable in 
combination with an optical digital audio cable.(
>14, 15)≥ If there is no sound from the equipment connected to this 
unit’s DIGITAL AUDIO IN terminal, please make sure that 
the optical audio output of the equipment is set to PCM.
Cannot charge or operate.
≥ Check that the iPod/iPhone is connected firmly. ( >32)
≥ The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
≥ When unexpected operation occurs while using the 
iPod/iPhone, connect the iPod/iPhone again or try to restart 
the iPod/iPhone.
Cannot display iPod/iPhone videos/photos on the TV.
≥Make sure that TV is connected to the VIDEO OUT terminal 
on this unit. ( >14)
≥ Operate the iPod/iPhone menu to make the appropriate 
video/photo output settings for your TV. (Refer to operating 
instructions for your iPod/iPhone.)
The TV input channel unintentionally changes to HDMI input.
≥When the main unit is connected with an “HDAVI Control” 
compatible TV and VIDEO IN is selected for iPod/iPhone 
video or photo playback, the TV input channel will 
automatically change to the HDMI input channel when 
[HOME] is pressed.
jRe-select the TV’s VIDEO IN input channel.
TV screen and videoSound
iPod/iPhone operation
SC-BTT770_370_270P_eng.book  44 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分
 
						

							Reference
45
VQT3D27
Distorted sound or noise is heard.
≥Adjust the position of the antenna.
≥ Use an outdoor antenna. ( >16)
A beat sound is heard.
≥Try to keep a certain amount of distance between the 
antenna and the TV.
No power.
≥ Ensure the AC power supply cord of the wireless system is 
connected properly.
The wireless link indicator is flashing.
≥There is no link between the main unit and the wireless 
system. Turn the wireless system off and then back on. 
Alternatively, turn the wireless system off, disconnect the AC 
power supply cord and then reconnect it.
The wireless link indicator does not light.
≥Check that the main unit is turned on, and the wireless 
system is turned on.
≥ Ensure that the digital transmitter is fully inserted into the slot 
of the main unit. ( >17)
The wireless link indicator keeps flashing between red and 
green.
≥There is a power supply pr oblem. Consult the dealer.
I can’t connect to the network.
≥ Confirm the network connection and settings. ( >17, 20, 40)
≥ Check the operating instructions for each device and 
connect accordingly.
BD-Video or DVD-Video is not played.
≥ Ensure the disc is for the correct BD-Video region code or 
DVD-Video region number, and is not defective. ( >8)
≥ You have set a ratings level to limit BD-Video or DVD-Video 
play. Change this setting. ( >37)
≥ Some BD-Video can only be output with HDMI.
I cannot play back BD-Live.
≥The SD card is write-protected. ( >9)
≥ Confirm that this unit is connected to the broadband Internet. 
(> 17)
≥ Confirm the “BD-Live Internet Access” settings. (> 37)
≥ Confirm an SD Card is inserted into the SD Card slot. ( >22)
Alternative soundtrack and su btitles cannot be selected.
≥ The languages are not recorded on the disc.
≥ You may not be able to use the playback menu to change the 
soundtrack and subtitles on some discs. Use the disc’s 
menus to make changes. ( >25)
Angle cannot be changed.
≥Angles can only be changed during scenes where different 
angles are recorded.
Messages
The following messages or service numbers appear on the 
television or unit’s display when something unusual is detected 
during startup and use.
Cannot play.
≥You inserted an incompatible disc. (Discs recorded in PAL 
video, etc.)
Cannot display on this unit.
≥You tried to play a non-compatible image.
No disc is inserted.
≥The disc may be upside down.
$  This operation is not available.
≥ Some operations are unsupported by the unit. For example;
jBD-Video: During playback, reverse slow-motion or 
reverse frame-by-frame is not possible.
IP address is not set.
≥The “IP Address” in “IP Address / DNS Settings” is “---. ---. 
---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default 
Gateway”. (Select the automatic address acquisition if 
necessary.)
No Video
≥Depending on the connected iPod/iPhone, video menu may 
not be available on the TV. Select “ALL” on the unit’s display 
and operate video playback from your iPod/iPhone menu. 
(> 34)
F99
≥ The unit fails to operate properly. Press [POWER Í/I] on the 
main unit to switch the unit to standby for 3 seconds. Now 
press [POWER Í/I] on the main unit again to turn the unit 
on.
U59
≥ The unit is hot.
The unit switches to standby for safety reasons. Wait for 
about 30 minutes until the message disappears.
Select a position with good ventilation when installing the 
unit. Do not block the ventilation hole on the rear and side of 
the unit.
HDMI ONLY
≥Some BD-Video discs can only be output with HDMI.
NET
≥While connecting to a network.
Radio
[BTT770]
Wireless system (SH-FX71)
Network
Other difficulties with playback
On the television
On the unit’s display
SC-BTT770_370_270P_eng.book  45 ページ  ２０１０年１２月２４日　金曜日　午前１０時５７分
 
						

							46
VQT3D27
No PLAY
≥There is a viewing restriction on a BD-Video or DVD-Video. 
(> 37)
No READ
≥The media is dirty or badly scratched. The unit cannot play.
PLEASE WAIT
≥The unit is carrying out an internal process.This is not a 
malfunction. You cannot operate the unit while “PLEASE 
WAIT” is displayed.
SET  
(“   ” stands for a number.)
≥ The remote control and main unit are using different codes. 
Change the code on the remote control. 
Press and hold [OK] and the indicated 
number button at the same time for 
more than 5 seconds.
H or F
(“   ” stands for a number.)
≥ Check and correct the speaker cable connections.
≥ There is something unusual.
≥ Check the unit using the troubleshooting guide. If the service 
number does not disappear, do the following.
1 Disconnect the plug from the household AC outlet, wait a 
few seconds, then reconnect it.
2 Press [POWER Í/I] to turn the power on.
If the service number does not  disappear despite doing the 
above, request service from t he dealer. Inform the dealer of 
the service number when requesting service.
UPD /
(“   ” stands for a number.)
≥ The firmware is being updated. Please do not turn off power.
IPOD OVER CURRENT ERROR
≥The iPod/iPhone is drawing too much power. Remove the 
iPod/iPhone, and turn the unit off and on again.
START
≥The system is being restarted during the firmware update. 
Please do not turn off power.
FINISH
≥The firmware update is completed.
NOT CONDITIONAL
≥The requested operation cannot be conducted.
Supplemental 
information
∫ Display languages list
∫ Language code list
DisplayLanguageDisplayLanguageDisplayLanguage
LanguageCodeLanguageCodeLanguageCode
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian ARA  
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR 
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
FinnishArabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
Abkhazian 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Amharic
:6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6589
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali; Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577
Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783
Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji: 7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178 Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish:
7165
Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686
Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869
Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185 Rhaeto-Romance:
8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387
Swedish: 8386
Tagalog: 8476
Tajik: 8471
Tamil: 8465
Tatar: 8484
Telugu: 8469
Thai: 8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yoruba: 8979
Zulu: 9085
VQT3D27~Body_mst.fm  46 ページ  ２０１０年１２月２４日　金曜日　午後８時２７分
 
						

							Reference
47
VQT3D27
Java and all Java-based trademarks and logos are trademarks or 
registered trademarks of Sun Microsystems, Inc. in the United States 
and other countries.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby 
Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 
5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 
7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents 
issued & pending. 
DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD 
Master Audio | Essential and the DTS logos are trademarks of DTS, Inc. 
Product includes software. 
© DTS, Inc. All Rights Reserved.
This item incorporates copy protection technology that is protected by 
U.S. patents and other intellectual property rights of Rovi Corporation.\
 
Reverse engineering and disassembly are prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI
Licensing LLC in the 
United States and other countries.
This product is licensed under the AVC patent portfolio license and 
VC-1 patent portfolio license for the personal and non-commercial use 
of a consumer to (i) encode video in compliance with the AVC Standard \
and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC\
-1 
Video that was encoded by a consumer engaged in a personal and 
non-commercial activity and/or was obtained from a video provider 
licensed to provide AVC/VC-1 Video. No license is granted or shall be 
implied for any other use. Additional information may be obtained from 
MPEG LA, LLC.
See http://www.mpegla.com.
HDAVI Control™ is a trademark of Panasonic Corporation.
VIERA Link™ is a trademark of Panasonic Corporation.
VIERA CAST™ is a trademark of Panasonic Corporation.
EZ Sync™ is a trademark of Panasonic Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS 
and Thomson.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic 
Corporation and Sony Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation\
.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
YouTube and Picasa are trademarks of Google, Inc.
Skype, associated trade marks and logos and the “      ” logo are \
trade 
marks of Skype Limited.
gSOAP Public License 1.3
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van 
Engelen, Genivia inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY 
GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, 
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGE.
“Made for iPod” and “Made for iPhone” mean that an electroni\
c 
accessory has been designed to connect specifically to iPod, or 
iPhone, respectively, and has been certified by the developer to meet 
Apple performance standards.
Apple is not responsible for the operation of this device or its 
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or iPhone may 
affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks 
of Apple Inc., registered in the U.S. and other countries.
This product incorporates the following software:
For the software categorized as (3) and (4), please refer to the ter\
ms 
and conditions of GPL v2 and LGPL v2.1, as the case may be at 
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and 
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
In addition, the software categorized as (3) and (4) are copyrighted\
 by 
several individuals. Please refer to the copyright notice of those 
individuals at 
http://www.am-linux.jp/dl/AWBPP11
The GPL/LGPL software is distributed in the hope that it will be useful,\
 
but WITHOUT ANY WARRANTY, without even the implied warranty of 
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
At least three (3) years from delivery of products, Panasonic will giv\
e to 
any third party who contacts us at the contact information provided 
below, for a charge no more than our cost of physically performing 
source code distribution, a complete machine-readable copy of the 
corresponding source code covered under GPL v2/LGPL v2.1.
Contact Information
[email protected]
Source code is also freely available to you and any other member of 
the public via our website below.
http://www.am-linux.jp/dl/AWBPP11 the software developed independently by or for Panasonic 
Corporation,
the software owned by third party and licensed to Panasonic 
Corporation,
the software licensed under the GNU General Public License, 
Version 2 (GPL v2),
the software licensed under the GNU LESSER General Public 
License, Version 2.1 (LGPL v2.1) and/or,
open sourced software other than the software licensed under the 
GPL v2 and/or LGPL v2.1
(1)
(2)
(3)
(4)
(5)
This product includes software developed by the OpenSSL Project 
for use in the OpenSSL Toolkit.
 (http://www.openssl.org/)
This product includes software developed by the University of 
California, Berkeley and its contributors.
FreeType code.
The Independent JPEG Group's JPEG software.
For the software categorized as (5) includes as follows.
1.
2.
3.
4.
SC-BTT770_370_270P_eng.book  47 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分
 
						

							48
VQT3D27
Specifications
* [BTT370] When using SH-FX71(optional), RMS TTL power output is 
changed to 930 W. 
GENERAL
Power consumption: 85 W
Power consumption in standby mode:
[BTT770] [BTT370]Approx. 0.05 W
 
[BTT270] [BTT273]Approx. 0.4 W
Power supply: AC 120 V, 60 Hz
iPod/iPhone Connector: DC OUT 5 V 1.0 A MAX
[BTT770]  [BTT370]  
Communication Camera 
(Rear USB): DC OUT 5 V 500 mA MAX
Dimensions (W kHk D):
[BTT770]430 mm k40 mm k279 mm
(1615/16qk 19/16qk1031/32q)[BTT370] [BTT270] [BTT273]430 mm k38 mm k279 mm
(1615/16qk 11/2qk1031/32q)
Mass (Weight):
[BTT770]Approx. 3 k g (6.6 lbs)
[BTT370] [BTT270] [BTT273]Approx. 2.7 k g (6 lbs)
(Dimensions and Weight do not 
include speakers)
Operating temperature range: 0
oC to 40oC 
(32oF to 104oF)
Operating humidity range: 35 % to 80 % RH 
(no condensation)
AMPLIFIER SECTION
RMS TTL POWER OUTPUT:1000 W*
1 kHz, 10 % total harmonic distortion FRONT: 
[BTT770]185 W per ch (3 ≠)
[BTT370] [BTT270] [BTT273]160 W per ch (3 ≠)
CENTER: 
[BTT770]180 W per ch (3 ≠)
[BTT370] [BTT270] [BTT273]160 W per ch (3 ≠)
SURROUND: 
[BTT770]125 W per ch (3 ≠)
[BTT370] [BTT270] [BTT273]160 W per ch (3 ≠)
100 Hz, 10 % total harmonic distortion SUBWOOFER: 200 W per ch (3≠)
FTC TTL POWER OUTPUT: 430 W
120 Hz to 20 kHz, 1.0 % total harmonic distortion FRONT: 60 W per ch (3≠)
CENTER: 90 W per ch (3≠)
SURROUND: 60 W per ch (3≠)
45 Hz to 120 Hz, 1.0 % total harmonic distortion SUBWOOFER: 100 W (3≠)
Audio Input AUX: k1
Digital Audio Input Optical: k1
[BTT770] [BTT370] HDMI AV 
input: k
2
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: PCM, Dolby Digital, DTS
FM TUNER SECTION
Frequency range:87.9 MHz to 107.9 MHz (200 kHz step),
87.5 MHz to 108.0 MHz (100 kHz step)
Antenna terminals: 75≠ (unbalanced)
SPEAKER SECTION
FRONT SPEAKERS[BTT770] SB-HF775
Ty p e : 2 WAY 3 SPEAKER Bass-ref.
Woofer: 3.5 cm k 10 cm (1
3/8qk 4q) CONE 
TYPE k 2
Tweeter: 2.5 cm (1q) SEMI-DOME TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz ( j10 dB)
Dimensions (W kHk D): 255 mmk1024 mmk 255 mm
(10
1/16qk 4011/32qk101/16q)
Mass (Weight): Approx. 2.3 kg (5.07 lbs)
[BTT370] [BTT273] SB-HF370
Ty p e : 2 WAY 2 SPEAKER Bass-ref.
Woofer: 6.5 cm (2
1/2q) CONE TYPE
Tweeter: 2.5 cm (1q) SEMI-DOME TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 85 Hz to 25 kHz (j16 dB),
105 Hz to 24 kHz ( j10 dB)
Dimensions (W kHk D): 135 mmk404 mm k135 mm
(5
5/16qk 1529/32qk55/16q)
Mass (Weight): Approx. 0.82 kg (1.81 lbs)
[BTT270] SB-HF270
Ty p e : 1 WAY 1 SPEAKER Bass-ref.
Full range: 6.5 cm (2
1/2q) CONE TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz ( j10 dB)
Dimensions (W kHk D): 80 mmk11 7 m m k70.5 mm
(3
5/32qk 419/32qk215/16q)
Mass (Weight): Approx. 0.35 kg (0.77 lbs)
CENTER SPEAKER
[BTT770] SB-HC775
Ty p e : 2 WAY 3 SPEAKER Bass-ref.
Woofer: 3.5 cm k 10 cm (1
3/8qk 4q) CONE 
TYPE k 2
Tweeter: 2.5 cm (1q) SEMI-DOME TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz ( j10 dB)
Dimensions (W kHk D): 424 mmk59 mm k76 mm
(16
23/32qk 211/32qk3q)
Mass (Weight): Approx. 1.06 kg (2.34 lbs)
[BTT370] [BTT273] SB-HC370
Ty p e : 1 WAY 1 SPEAKER Bass-ref.
Full range: 6.5 cm (2
1/2q) CONE TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 95 Hz to 25 kHz (j16 dB),
120 Hz to 22 kHz ( j10 dB)
Dimensions (W kHk D): 145 mmk81 mm k70.5 mm
(5
23/32qk 33/16qk215/16q)
Mass (Weight): Approx. 0.515 kg (1.14 lbs)
[BTT270] SB-HC270
Ty p e : 1 WAY 1 SPEAKER Bass-ref.
Full range: 6.5 cm (2
1/2q) CONE TYPE
Impedance: 3≠
Output sound pressure: 79 dB/W (1 m)
Frequency range: 90 Hz to 25 kHz (j16 dB),
115 Hz to 22 kHz ( j10 dB)
Dimensions (W kHk D): 145 mmk81 mm k70.5 mm
(5
23/32qk 33/16qk215/16q)
Mass (Weight): Approx. 0.5 kg (1.1 lbs)
VQT3D27~Body_mst.fm  48 ページ  ２０１１年１月６日　木曜日　午後２時９分
 
						

							Reference
49
VQT3D27
* Transfer rates are theoretical values; however, actual communication rate will vary according to communication environment or connected equipment.
Specifications are subject to change without notice.
≥With certain recording states and folder structures, the play 
order may differ or playback may not be possible.
SURROUND SPEAKERS
SB-HS270
Ty p e : 1 WAY 1 SPEAKER Bass-ref.
Full range: 6.5 cm (2
1/2q) CONE TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz ( j10 dB)
Dimensions (W kHk D): 80 mmk11 7 m m k70.5 mm
(3
5/32qk 419/32qk215/16q)
Mass (Weight): Approx. 0.35 kg (0.77 lbs)
SUBWOOFER
[BTT770] [BTT370]  SB-HW370
Ty p e : 1 WAY 1 SPEAKER Bass-ref.
Woofer: 16 cm (6
1/2q) CONE TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 30 Hz to 220 Hz (j16 dB),
35 Hz to 180 Hz ( j10 dB)
Dimensions (W kHk D): 180 mmk408 mm k300 mm
(7
3/32qk 161/16qk1113/16q)
Mass (Weight): Approx. 4.3 kg (9.5 lbs)
[BTT270] [BTT273] SB-HW270
Ty p e : 1 WAY 1 SPEAKER Bass- ref.
Woofer: 16 cm (6
1/2q) CONE TYPE
Impedance: 3≠
Output sound pressure: 78 dB/W (1 m)
Frequency range: 40 Hz to 220 Hz (j16 dB),
45 Hz to 180 Hz ( j10 dB)
Dimensions (W kHk D): 145 mmk289.5 mm k258 mm
(5
23/32qk1113/32qk 105/32q)
Mass (Weight): Approx. 3.0 kg (6.6 lbs)
TERMINAL SECTION
SD card slot: Connector: 1 system
Ethernet: 10BASE-T/100BASE-TX 1 system
WLAN Antenna: Tx 1, Rx 2
Standard Compliance: IEEE802.11n / IEEE802.11a / 
IEEE802.11g / IEEE802.11b
Transmission system: MISO-OFDM system, 
OFDM system, DSSS system
Transfer rate (Standard)*: IEEE802.11n:
Tx Max. 150 Mbps, Rx Max. 300 MbpsIEEE802.11g / IEEE802.11a: Max. 54 Mbps
IEEE802.11b: Max. 11 Mbps
Access Mode: Infrastructure mode
Security: WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit / 128 bit)
(This unit supports WPA and WPA2 
encryption.)
VIDEO SECTION
Signal system: NTSC
Video output Output level: 1.0 Vp-p (75≠)
Output connector: Pin jack (1 system)
HDMI AV output Output format: 1080p/1080i/720p/480p
Output connector: Type A (19 pin)
This unit supports “HDAVI Control 5” 
function.
LASER Specification:
Class  I LASER Product
Wave length: 790 nm (CDs)/655 nm (DVDs)/
405 nm (BDs)
Laser power:
No hazardous radiation is emitted 
with the safety protection
[BTT770] WIRELESS SYSTEM 
AND DIGITAL TRANSMITTER

RMS TTL POWER OUTPUT: 250 W
1 kHz, 10 % total harmonic distortion
SURROUND: 125 W per ch (3≠)
FTC TTL POWER OUTPUT: 68 W
120 Hz to 20 kHz, 1.0 % total harmonic distortion
SURROUND: 34 W per ch (3≠)
 Wireless moduleFrequency range: 2.4 to 2.4835 GHz
No. of channels: 3
 Power supply: AC 120 V, 60 Hz
Power consumption Digital transmitter: 1.2 W
Wireless system: 35 W
Power consumption 
in off mode: Approx. 0.2 W
Dimensions (W kHk D):
Digital transmitter: 43.3 mmk37.3 mm k8.2 mm
(1
11/16qk 115/32qk5/16q)
Wireless system: 165 mmk91.5 mm k164 mm
(6
1/2qk 35/8qk615/32q)
Mass (Weight) Digital transmitter: Approx. 0.01 kg (0.02 lbs)
Wireless system: Approx. 0.66 kg (1.46 lbs)
Operating temperature range: 0
oC to 40oC 
(32oF to 104oF)
Operating humidity range: 35 % to 80 % RH 
(no condensation)
File format
File 
formatExtensionReference
MP3 “.MP3”, 
“.mp3“ ID3 tags (Only titles and the names 
of artists)
JPEG“.JPG”, 
“.jpg“
≥
MOTION JPEG and Progressive 
JPEG is not supported
≥ You may not be able to play back 
the file if you have edited the 
folder structure or the file name 
on a PC or other device.
VQT3D27~Body_mst.fm  49 ページ  ２０１１年１月２０日　木曜日　午後１時５４分
 
						

							50
VQT3D27
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company, 
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)If your product does not work properly because of a defect in materials 
or workmanship, Panasonic Consumer Electronics Company (referred 
to as “the warrantor”) will, for the length of the period indicated on the 
chart below, which starts with the date of original purchase (“warranty 
period”), at its option either (a) repair your product with new or 
refurbished parts, (b) replace it with a new or a refurbished equivalent 
value product, or (c) refund your purchase price. The decision to repair, 
replace or refund will be made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. 
During the “Parts” warranty period, there will be no charge for parts. 
This Limited Warranty excludes both parts and labor for 
non-rechargeable batteries, antennas, and cosmetic parts (cabinet). 
This warranty only applies to products purchased and serviced in the 
United States or Puerto Rico. This warranty is extended only to the 
original purchaser of a new product which was not sold “as is”.
Mail-In ServiceFor assistance in the U.S.A. and Puerto Rico in obtaining repairs, 
please ship the product prepaid to:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
[email protected]
When shipping the unit, carefully pack, include all accessories, and 
send it prepaid, adequately insured and preferably in the original carton. 
When shipping Lithium Ion batteries please visit our Web Site at 
www.panasonic.com/BatteryHandling
 as Panasonic is committed to 
providing the most up to date information. Include a letter detailing the 
complaint, a return address and provide a daytime phone number 
where you can be reached. A valid registered receipt is required under 
the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE 
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And ExclusionsThis warranty ONLY COVERS failures due to defects in materials or 
workmanship, and DOES NOT COVER normal wear and tear or 
cosmetic damage. The warranty ALSO DOES NOT COVER damages 
which occurred in shipment, or failures which are caused by products 
not supplied by the warrantor, or failures which result from accidents, 
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty 
installation, set-up adjustments, misadjustment of consumer controls,  improper maintenance, power line surge, lightning damage, 
modification, introduction of sand, humidity or liquids, commercial use 
such as hotel, office, restaurant, or other business or rental use of the 
product, or service by anyone other than a Factory Service Center or 
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED 
UNDER “LIMITED WARRANTY COVERAGE
”. 
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS 
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. 
(As examples, this excludes damages for lost time, travel to and from 
the servicer, loss of or damage to media or images, data or other 
memory or recorded content. The items listed are not exclusive, but for 
illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE 
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or 
consequential damages, or limitations on how long an implied warranty 
lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have 
other rights which vary from state to state. If a problem with this product 
develops during or after the warranty period, you may contact your 
dealer or Service Center. If the problem is not handled to your 
satisfaction, then write to the warrantor’s Consumer Affairs Department 
at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS 
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
As of December 2010
Product or Part Name PartsLabor
Blu-ray Disc Player, Portable 
Blu-ray Disc Player 1 year
90 days
Blu-ray Home Theater System 1 year 1 year
DVD Player, Portable DVD Player 1 year 90 days
DVD Recorder 1 year90 days
Rechargeable Batteries (pack), 
DVD-RAM Disc (defective exchange)10 days Not
Applicable
Customer Services Directory (United States and Puerto 
Rico)
Obtain Product Information and Operating Assistance; locate 
your nearest Dealer or Service Center; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, 
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 
1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all 
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) 
(Monday-Friday 9am-9pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express, and 
Personal Checks)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
User memo:
DATE OF PURCHASE  ________________________
DEALER NAME ______________________________
DEALER ADDRESS  _____________________________________________________________________
TELEPHONE NUMBER  _______________________The model number and serial num ber of this product can be 
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER  _____________________________
SERIAL NUMBER  _____________________________
VQT3D27~Body3_eng.fm  50 ページ  ２０１１年１月８日　土曜日　午後１２時１３分