Panasonic Sc Bt205 Operating Instructions

							31
RQT9510
This system features two different iPod playback modes.
The first of these is EXTENDED mode, for playback of music and video contents. With this mode, you can operate the iPod from 
the main unit. The second mode is SIMPLE mode, which can be used for playback of three types of contents – music, photos, 
and videos. With this mode, simple operations such as play, stop, and search can be performed on the display of your iPod.
1Press [iPod] to select “IPOD”.
The iPod automatically switches to this unit’s display mode.≥To switch the menu, press [STATUS] several times.
Music menu"""""#Video menu^"iPod menu (iPod LCD)10) and switch the TV input to video in.
2Press [3,4] to select an item and press [OK].
≥Play starts from the selected song or video.
≥To display the previous or next page
Press [2,1].
≥Press [RETURN] to return to the previous screen.
Clear/display iPod Music or Video menu during 
playback.
Press [TOP MENU/DIRECT NAVIGATOR].
You can also play music and video using SIMPLE mode.
1Press [iPod] to select “IPOD”.
2Press [STATUS] several times to select the iPod 
menu (iPod LCD).
≥“ALL” is displayed on the main unit.
Proceed operations through iPod display.
3Switch the TV input to video in.
≥Ensure the video connection to the VIDEO OUT terminal 
on this unit (>10).
4Play a slideshow on your iPod.
The picture will be displayed on your TV.
You can use the remote control to operate the iPod menu.≥[3,4]:  To navigate menu items
≥[OK]: To go to the next menu.
≥[RETURN]:To return to the previous menu.
The remote control operation may vary between iPod models.While in “MUSIC” or “VIDEOS” mode, it is possible to select 
the following playback modes.
*1For music playback only.
1Press [START].
2Press [3,4] to select “Menu” and then press 
[OK].
3Press [3,4] to select “Play Mode” and then 
press [OK].
4Press [3,4] to select an item and press [OK].
5Press [3,4] to select the setting and press 
[OK].
While playing music or video it is possible to use the following 
buttons of the remote control.
≥Use the controls on the iPod unit during photo playback.
You can select the surround sound effect when you press [SURROUND] (>17).
You can select the sound mode when you press [SOUND] (>17).
iPod Playback
Enjoy music/video (EXTENDED mode)
≥If the Video menu (EXTENDED mode) is accessed, 
the video shuffle playback mode on the iPod is set 
to Off when the iPod is disconnected from the 
unit.
Enjoy photos (SIMPLE mode)
Music iPod
RETURNOK
PlaylistsArtistsAlbumsSongsPodcastsAudiobooks
e.g., music main menu screen
iPod
Ronaldo
2:43
Good morning
45 of 1230
Happy days
Shuffle (Albums)
Repeat (All)
Playback condition
Song
Album
Playing position
Playback modeArtist e.g., music playback screen
NOTE
Other methods of playback
ItemsSelection/playback method
Play Mode
Shuffle
*1
≥Off: Cancel
≥Songs: Play all songs on iPod in 
random order.
≥Albums: Play all songs on album in 
random order.
Repeat
≥Off: Cancel
≥One: Play a single song/video 
repeatedly.
≥All: Play all songs/videos from 
selected items (e.g., Playlists, 
Albums, etc.) repeatedly.
Playback modes during and after connection.
≥Music playback modes set on the iPod will be 
maintained when connected to the main unit. 
Changes made while the iPod is connected to the 
main unit be kept on the iPod after disconnecting it.
≥If the Video menu (EXTENDED mode) is accessed, 
the video shuffle playback mode on the iPod is set 
to Off when the iPod is disconnected from the unit.
To return to the previous screen
Press [RETURN].
Basic controls
ButtonsFunctions
[1PLAY] Play
[∫STOP] Pause
≥Press [1PLAY] to restart play.
≥Playback start position may not be 
stored in memory in certain cases. [;PAUSE]
[SKIP:, 
SKIP9]Skip
(Press and hold)
[SEARCH6, 
SEARCH5]Search
NOTE
TIPS
Other devices
SCBT200&205EB_RQT9510-B.book  31 ページ  ２００９年５月２１日　木曜日　午後５時２２分
 
						

							32
RQT9510
Enjoying VIERA CASTTM
You can access a selection of Internet services from the Home screen with VIERA CAST, for example YouTube, Picasa Web 
Albums. (Current as of March 2009)
≥VIERA CAST requires a broadband Internet connection. Dial-up Internet connections cannot be used.
Firmware updating
Preparation
≥Network connection (>13), Network setting (>33)
1While stopped
Press [BD/SD] to select “BD/DVD”.
2Press [VIERA CAST].
≥Message is displayed. Please read these instructions carefully 
and then press [OK] to start VIERA CAST function.
3Press [3,4,2,1] to select the item and press [OK].
≥You can operate VIERA CAST using the following buttons on 
the unit’s remote control. [3,4,2,1], [OK], [RETURN], 
[OPTION], coloured buttons and numbered buttons.
≥To access more features on YouTube or Picasa Web Albums site, 
enter your user ID and password that you have previously set up with 
these sites through the internet on your PC. However, not all features 
may be accessible through VIERA CAST.
VIERA CAST Home screen;
Regarding “Settings”
Set VIERA CAST Home screen.
≥My Account:You can remove your account from the unit.
≥Lock:Enter a password to lock YouTube and Picasa Web 
Albums.
≥Notices
≥Depending on the usage conditions, it may 
take a while to read all the data.
≥The connection to the Internet may take time 
or the Internet may not be connected 
depending on the connection environment. 
≥The unit is connected to the Internet when 
VIERA CAST is used, generating 
communication charges.
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VIERA CAST
Press [START] or [TOP MENU/DIRECT NAVIGATOR], 
then press [RETURN] to cancel the menu.
≥Set the “Network Lock” to “On” to restrict using 
VIERA CAST. (>40)
≥Set the “Audio Auto Gain Control” to “Off” 
when the audio is warped while using the 
VIERA CAST. (>40)
≥When display of the contents is truncated, set 
the “Reduced Screen Display” to “On”. (>40)
≥Set the “On-Screen Language”, to switch the 
language for Home screen. (>38)≥Set the “Time Zone” or “Summer Time” when wrong 
time is displayed on the screen. (>40)
≥VIERA CASTTM home screen is subject to 
change without notice.
≥The services through VIERA CAST
TM are 
operated by their respective service providers, 
and service may be discontinued either 
temporarily or permanently without notice. 
Therefore, Panasonic will make no warranty 
for the content or the continuity of the 
services.
≥All features of websites or content of the 
service may not be available.
≥Some content may be inappropriate for some 
viewers.
≥Some content may only be available for 
specific countries and may be presented in 
specific languages.
Welcome to Network ServiceYour Panasonic Network Service allows you to access web-based content on your Player/Recorder.
Network Service is subject to change without notice. The Service through Network Service is operated by 
their respective service providers, and service may be discontinued either temporarily or permanently 
without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the 
services. All features of websites or content of the service may not be available. Some content may be 
inappropriate for some viewers and may only be available for specific countries and may be presented in 
specific languages. You may disable the Network Service feature by following the instructions found in 
your Operating Instructions.
It's recommanded your player/recorder is connected to Full HD display with HDMI. The display of the 
contents may be truncated, depending on your TV. You may reduce to screen size by following the 
instructions found in your Operating Instructions.ENTERDon’t show this message again
Images are for illustration purpose, message may change without notice.
Weather20ÃNew York, NY
NNW7mphSettings
Panasonic SelectFeatured Videos
TM
Images are for illustration purpose, contents may change without notice.
NOTE
TIPS
NOTE
When this unit remains connected to the Internet, it will automatically check 
for the latest firmware version when it is turned on.
When latest firmware version is available, the following screen is displayed.
Select “Yes” or “No”.
≥If “Yes” is selected, then follow the on-screen instructions.
≥If “No” is selected, then manually update the firmware later. (Bright)
After the latest firmware is downloaded, the system will be restarted 
and the firmware will be updated.
When the system is restarted, the screen display 
disappears and “START” is displayed on the 
unit’s display.
After the firmware is updated and the system is restarted, the following 
screen indicates that the firmware update has been completed.
≥During the update process, no other operations can be performed. Serious 
damage may occur if you turn off the unit and/or press any buttons.
≥Downloading will require several minutes. 
It may take longer or the Internet may not 
be connected depending on the 
connection environment. It is required that 
you use a broadband connection.
≥If downloading on this unit fails or this unit is not 
connected to the Internet, then you can download 
the latest firmware from the following website and 
burn it to a CD-R to update the firmware.
http://panasonic.net/support/
(This site is in English only.)
≥When the unit is connected to the Internet, 
communication charges may be generated.
≥If you do not want to check for the latest 
firmware version when the unit is turned on, set 
“Automatic Update Check” to “Off”. (
>40)
Manually updating the firmware
If the firmware update is not carried out when the 
unit is turned on, a message is displayed when 
displaying the START menu.
1) Press [SETUP].2) Press [3,4] to select “General” and press [OK].3) Press [3,4] to select “Firmware 
Update” and press [OK].
4) Press [3,4] to select “Update Now” and 
press [OK].
5) Press [2,1] to select “Yes” and press [OK].
Firmware Update
Ye sNo
The latest firmware is available.
  Latest Online Version: x.x
  Current Installed Version: x.x 
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
The firmware has been updated.
Current Installed Version: x.x
RETURNOK
NOTE
TIPS
The latest firmware is available.
Please update firmware in Setup.
Advanced operations
SCBT200&205EB_RQT9510-B.book  32 ページ  ２００９年５月２１日　木曜日　午後５時２２分
 
						

							33
RQT9510
Network settings
These settings are used if you will connect this unit to the Internet.
≥The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. 
(>40)
It is required that you use a broadband connection.
Preparation
≥Connect to a broadband network. (>13)
Testing of “IP Address / DNS Settings”
Always test the connection when a LAN cable is connected.
1While stopped
Press [BD/SD] to select “BD/DVD”.
2Press [SETUP].
3Press [3,4] to select “Network Settings” and 
press [OK].
4Press [3,4] to select “IP Address / DNS 
Settings” and press [OK].
5Press [3,4] to select “Connection Test” and 
press [OK].
“Testing...”:The test is in progress.
“Pass”: The connection is completed.
Press [RETURN] to exit.
“Fail”: Please check the connection and settings.
≥Perform the “Connection Test” also when any 
change was made to the “IP Address / DNS 
Settings”.
≥If the connection test fails, it may be necessary to set the 
MAC address of this unit at the router side. The MAC 
address can be displayed by pressing [SETUP] and 
selecting “Network Settings”.
N
R U T E
R K
O
IP Address/ DNS Settings
Connection Test
OnOn
OnOn
OnOn
IP Address Auto-Assignment
DNS-IP Auto-Assignment IP Address
Subnet Mask
Gateway Address
Primary DNS
Secondary DNS
Connection Speed Auto-Config
Connection Speed Setting
NOTE
RETURN
Network SettingsIP Address / DNS Settings
Proxy Server Settings
MAC Address:  xx-xx-xx-xx-xx-xx
OK
Network Service
Setting the IP address
In most cases, default settings can normally be used 
without making any changes.
Set the IP address only when the router has no DHCP 
server functions or when the router’s DHCP server 
function is disabled.
After performing steps 1–4 (Dleft)
5Press [3,4] to select “IP Address 
Auto-Assignment” and press [2,1] to select 
“Off”.
6Press [3,4] to select “IP Address”, “Subnet 
Mask” or “Gateway Address” and press [OK].
7Enter numbers with the numbered buttons and 
press [OK].
≥After checking the specifications for your broadband 
router, enter each number.
If the number is unknown, then check the number of 
other devices such as personal computers connected 
via a LAN cable. Assign a different number from those 
of other devices for the “IP Address” and the same 
number for others.
≥If a wrong number is entered, then press [CANCEL].
8Press [2,1] to select “Yes” and press [OK].
≥The numeric input range is between 0 and 255.
Setting the DNS-IP
In most cases, default settings can normally be used 
without making any changes.
When setting an assigned DNS server from your Internet 
service provider, perform the following settings. 
After performing steps 1–4 (Dleft)
5Press [3,4] to select “DNS-IP 
Auto-Assignment” and press [2,1] to select 
“Off”.
6Press [3,4] to select “Primary DNS” or 
“Secondary DNS”and press [OK].
7Enter numbers with the numbered buttons and 
press [OK].
≥Follow the instructions given by your Internet service 
provider and enter the numbers.
If the number is unknown, then check the number of 
other devices such as personal computers connected 
via a LAN cable and assign the same number.
≥If a wrong number is entered, then press [CANCEL].
8Press [2,1] to select “Yes” and press [OK].
≥The numeric input range is between 0 and 255.
NOTE
192...1
Primary DNS
Please input Primary DNS and press
[OK]. Press [CANCEL] to delete the selected 
character. To clear this setting, delete all 
characters and press [OK].
Number0  -  9    
NOTE
Advanced operations
SCBT200&205EB_RQT9510-B.book  33 ページ  ２００９年５月２１日　木曜日　午後５時２２分
 
						

							34
RQT9510
Network settings
Setting the connection speed
When the connection test results displays “Fail” after the IP 
and DNS-IP addresses are assigned, perform the following 
settings.
After performing steps 1–4 (>33)
5Press [3,4] to select “Connection Speed 
Auto-Config” and press [2,1] to select “Off”.
6Press [3,4] to select “Connection Speed 
Setting” and press [2,1] to select a 
connection speed.
≥Select a connection speed in accordance with the 
environment of the network connected.
≥When the settings are changed, the network connection 
may be disabled depending on the device.
Testing of “Proxy Server Settings”
Always test the connection when new “Proxy Server 
Settings” have been made.
1While stopped
Press [BD/SD] to select “BD/DVD”.
2Press [SETUP].
3Press [3,4] to select “Network Settings” and 
press [OK].
4Press [3,4] to select “Proxy Server Settings” 
and press [OK].
5Press [3,4] to select “Connection Test” and 
press [OK].
“Testing...”:The test is in progress.
“Pass”: The connection is completed.
Press [RETURN] to exit.
“Fail”: Please check the connection and settings.
RETURN
Proxy Server SettingsInitializeProxy AddressProxy Port Number
OK
0Connection Test----
Setting the proxy server
In most cases, default settings can normally be used 
without making any changes. 
Please use this setting when instructed to by your 
Internet service provider.
After performing steps 1–4 (Dleft)
5Press [3,4] to select “Proxy Address” and 
press [OK].
≥The text entry screen is displayed.
Text field: shows the text you have entered
6Press [3,4,2,1] to select a character and 
press [OK].
Repeat this step to enter other characters.
≥Press [;PAUSE] to delete.
7Press [∫STOP] when you complete the entry.
8Press [3,4] to select “Proxy Port Number” 
and press [OK].
9Enter numbers with the numbered buttons and 
press [OK].
:Press [2,1] to select “Yes” and press [OK].
≥The specified ports may be blocked and not be 
able to be used depending on the network 
environment.
In order to restore the default settings
After performing steps 1–4 (Dleft)
1) Press [3,4] to select “Initialize” and press [OK].
2) Press [2,1] to select “Yes” and press [OK].
Using the numbered buttons to enter characters
e.g., entering the letter “F”
1) Press [3] to move to the 3rd row.
2) Press [3] twice to highlight “F”.
3) Press [OK].
_Proxy Address
Space
FinishDelete
OK
RETURN
1234567890
1234567890ABC
DEFabc
def
ghi
jkl/=% +-*
#$&
@
mno[]_
pqrs
()
tuv
{}
 Iwxyz
“’:;`^
.,?!
JKL
MNO
PQRS
TUV
WXY Z
0  --  9    
GH I
~
0
Proxy Port Number
Input HTTP Proxy server port number and 
press [OK]. The DIBSBDUFS
CFMPX
DBO
CF
deleted with [CANCEL]. The number will be
 set to "0" if all characters are deleted and 
[OK] is pressed.
Number0  -  9    
TIPS
3def
3def3def
Advanced operations
SCBT200&205EB_RQT9510-B.book  34 ページ  ２００９年５月２１日　木曜日　午後５時２２分
 
						

							35
RQT9510
Changing settings with the on-screen menu
On-screen menu operations
1Press [BD/SD] to select 
“BD/DVD”.
2Press [DISPLAY].
3Press [3,4] to select the 
menu and press [
1].
4Press [3,4] to select 
the item and press [1].
5Press [3,4] to select the setting.
≥Depending on the condition of 
the unit (playing, stopped, etc.) 
and media contents, there may 
be some items that you cannot 
select or change.
≥Some items can be changed 
by pressing [OK].
To exit the on-screen menu
Press [DISPLAY].
PictureSound
PlaySignal Type
Subtitle
Subtitle Style
Off Main
-Angle-
1ENG
Disc
Menus Items Settings e.g., BD-Video
NOTE
TIPS
What you can change with the on-screen menu 
MenusItemsSettings and details
Disc Signal Type[BD-V]
≥Primary Video
Video: The video recording method appears. (Dbelow, Video attribute)
Soundtrack: Select the type of audio or language. (Dbelow, Language, Audio attribute)
≥Secondary Video
Video: Select on/off of images.
The video recording method appears. (Dbelow, Video attribute)
Soundtrack: Select on/off of audio and the language. (Dbelow, Language, Audio attribute)
Video[AVCHD]
The video recording method appears. (Dbelow, Video attribute)
Soundtrack[AVCHD] [DVD-V]
Select the type of audio or language. (Dbelow, Language, Audio attribute)
[DVD-VR] [MPEG2]
The audio attributes appear. (Dbelow, Audio attribute)
[DivX]
Select the soundtrack number.
≥Soundtrack numbers are displayed even when there is only one audio type.
Subtitle[BD-V] [AVCHD] [DVD-V]
Turn the subtitle on/off and select the language. (Dbelow, Language)
[DVD-VR] (Only discs that contain subtitle on/off information)
Turn the subtitle on/off.
[DivX]
Turn the subtitle on/off and select “Text” or the subtitle number.
≥Subtitle number is displayed even if there are not multiple subtitles.
Subtitle Style[BD-V]
Select the subtitle style.
Audio channel[DVD-VR] [DivX] [MPEG2]
(>19, Changing audio during play)
Angle[BD-V] [DVD-V]
Select the number of the angle.
Some items may be changed only on the disc specific menu. (D18)
Language
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: DutchSVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: JapaneseCHI: Chinese
KOR: Korean
MAL: Malay
VIE: Vietnamese
THA: Thai
POL: PolishCES: Czech
SLK: Slovak
HUN: Hungarian
FIN: Finnish
¢:Others
Audio attribute
LPCM/ Digital/ Digital+/
TrueHD/DTS/DTS 96
/DTS-HD 
HI RES/DTS-HD MSTR/MPEG
Signal type
ch (channel) Number of channels
k (kHz) Sampling frequency
b (bit) N umber of bits
bps (bit per second) Transfer rate of bit
Video attribute
MPEG-2/MPEG-4 AVC/VC-1 Video recording 
method
480/576/720/1080 Video Format
24p/50i/60i/50p/60p Video Frame rate
YCbCr4:2:2/YCbCr4:4:4/RGB Colour Space
bps (bit per second) Transfer rate of bit
Advanced operations
SCBT200&205EB_RQT9510-B.book  35 ページ  ２００９年５月２１日　木曜日　午後５時２２分
 
						

							36
RQT9510
Changing settings with the on-screen menu
To select these settings, perform steps 1 – 5 (>35)
MenusItemsSettings and details
Play Repeat Play(Only when the elapsed time is being displayed on the unit’s display.)
Selects the item which you want to repeat. The items displayed differ depending on the type of media.
≥All tracks All tracks
≥Chapter Chapter
≥Playlists Playlist
≥Title Title
≥One track Track
≥Off
Select “Off” to cancel.
Random
[CD] [MP3]
While playing, press [3,4] to select “On”.
Random playback starts from the next track.
≥On≥Off
Playback 
Information 
Window
[BD-V] [DVD-V]
Displays audio/video attribute information of disc ( ), settings status of “Digital Audio Output” 
(
>38) ( ) and HDMI output information ( ). (>35 Audio attribute, Video attribute)
– Depending on the disc, display method may be different.
– The audio attribute information will be displayed following the Digital Audio Output” 
settings. (>38)
Press [RETURN] to exit.
Picture Mode
[BD-V] [AVCHD] [DVD-VR] [DVD-V] [DivX] [MPEG2]Select the picture quality mode during play.
≥Normal: Default setting
≥Cinema: Mellows movies, enhances detail in dark scenes.
≥Fine: Details are sharper
≥Soft:  Soft picture with smoother video
ProgressiveSelect the method of conversion for progressive output to suit the type of material being 
played (>55, Film and video).
≥Auto:Automatically detects the film and video content, and appropriately converts it.≥Video:Select when using “Auto” and the content is distorted.
≥Film:Select this if the edges of the film content appear jagged 
or rough when “Auto” is selected.
However, if the video content is distorted as shown in the 
illustration to the right, then select “Auto”.
24p 
[DVD-V]≥On≥Off
Only when you have selected “On” in “24p Output” (>39) and play discs recorded at a rate 
of 60 fields per second.
Sound
Sound Effects*
1, 2≥Off
Re-master *
3
This feature gives you a more natural sound by adding higher frequency signals not 
recorded on the track.
≥Re-master 1: When playing LPCM sound (Type of music): High tempo (e.g., pop and rock)
Other types of sound (Effect level): Light
≥Re-master 2: When playing LPCM sound (Type of music): Various tempos (e.g., jazz)
Other types of sound (Effect level): Medium
≥Re-master 3: When playing LPCM sound (Type of music): Low tempo (e.g., classical)
Other types of sound (Effect level): Strong
Dialog Enhancer*
1[BD-V] [AVCHD] [DVD-VR] [DVD-V] [DivX] [MPEG2] (3 channels or more only, including a centre channel)The volume of the centre channel is raised to make dialog easier to hear.
≥On≥Off
High Clarity 
SoundWhen the analogue video terminal is not being used, the electrical current that flows 
through the analogue video circuit can be stopped. This prevents adverse effects on the 
audio signals and produces clearer sound.
Use this when outputting image via HDMI Audio Output terminal. Analogue image will not 
be output via COMPONENT VIDEO OUT terminal or VIDEO OUT terminal.
≥On≥Off
Only when you have selected “Enable” in “High Clarity Sound” (>38)
*1When audio is output from the HDMI AV OUT terminal this function is effective only when “Dolby D/Dolby D +/Dolby TrueHD” 
or “DTS/DTS-HD” is set to “PCM”.(>38)
*2Not every function can be set individually.*3This function has no effect when the type of audio is Dolby Pro Logic II.
*&/+
Advanced operations
SCBT200&205EB_RQT9510-B.book  36 ページ  ２００９年５月２１日　木曜日　午後５時２２分
 
						

							37
RQT9510
Changing the unit’s settings
Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.
Underlined items are the factory presets.
Setup menu operations
1While stopped
Press [BD/SD] to select “BD/DVD”.
2Press [SETUP].
3Press [3,4] to select the menu and 
press [OK].
4Press [3,4] to select the item and 
press [OK].
If there are any other items, repeat these steps.5Press [3,4,2,1] to select the 
option and press [OK].
≥There may be differences in 
operation methods. If this 
happens, follow the on-screen 
instructions for the operation.
To return to the previous 
screen
Press [RETURN].
To exit the screen
Press [SETUP].
RETURN
SetupDiscPictureSoundDisplayTV / Device ConnectionNetwork SettingsGeneral
OK
NOTE
TIPS
Summary of settings
“Disc”
DVD-Video 
Ratings
Set a ratings level 
to limit DVD-Video 
play.Follow the on-screen instructions. Enter 
a 4-digit password with the numbered 
buttons when the password screen is 
shown. It will be the common password 
for “DVD-Video Ratings”, “BD-Video 
Ratings” and “Network Lock”.
≥Do not forget your password.≥8 No Limit
: All DVD-Video can be played.
≥1 to 7: Prohibits play of DVD-Video with 
corresponding ratings recorded on them.
≥0 Lock All: Prohibits play of all DVD-Video.
Changing settings (When level 0 to 7 is selected)
≥Unlock Player≥Change Password
≥Change Level≥Temporary Unlock
BD-Video Ratings
Set an age limit of 
BD-Video play.≥No Limit
: All BD-Video can be played.
≥0 to 254 year(s):Prohibits play of BD-Video with 
corresponding ratings recorded on them.
Changing settings (When 0 to 254 year(s) is selected)
≥Unlock Player≥Change Password
≥Change Level≥Temporary Unlock
Soundtrack 
PreferenceChoose the language for audio, subtitle 
and disc menus.
[BD-V] [DVD-V]
≥Some discs start in a certain language 
despite any changes you make here.
≥When the selected language is not 
available on the disc, the default 
language is played. There are discs 
where you can only switch the language 
from the menu screen. (D18)
≥Enter a code (>54) with the numbered 
buttons when you select “Other 
¢¢¢¢”.≥English
≥German≥French
≥Italian≥Spanish≥Dutch
≥Original: The original language of each disc will be selected.
≥Other ¢¢¢¢
Subtitle 
Preference≥Automatic
:
If the language selected for “Soundtrack Preference” is not 
available, subtitles of that language will automatically appear 
if available on that disc.
≥English≥German≥French
≥Italian≥Spanish≥Dutch
≥Other ¢¢¢¢
Menu 
Preference≥English
≥German≥French
≥Italian≥Spanish≥Dutch
≥Other ¢¢¢¢
BD-Live Internet Access 
[BD-V] (>21)
You can restrict Internet access when BD-Live functions are 
used.≥Permit: Internet access is permitted for all BD-Live contents.≥Limit: Internet access is permitted only for BD-Live 
contents which have content owner certificates.
Internet access is prohibited for all BD-Live 
contents without a certificate.
≥Prohibit: Internet access is prohibited for all BD-Live 
contents.
DivX Subtitle Text [DivX]
Select a suitable item according to the language used for DivX 
subtitles text (>22).
≥This item is displayed only when pressing [SETUP] after 
playing back a file.≥Latin 1 English, German, Spanish, etc.
≥Latin 2
Polish, Czech, Hungarian, etc.
≥Cyrillic Russian, etc.
“Picture”
Still Mode [BD-V] [AVCHD] [DVD-V]
Select the type of picture shown when you pause playback 
(>55, Frames and fields).≥Automatic
≥Field: Select if jittering occurs when “Automatic” is selected. 
(The picture is coarser.)
≥Frame:Select if small text or fine patterns cannot be seen 
clearly when “Automatic” is selected. (The picture is 
clearer and finer.)
Seamless Play [DVD-VR]
Select the play mode between playlist chapter segments and 
partially deleted titles.≥On
: The chapters in playlists are played seamlessly. This 
does not work while searching or when there are 
several audio types included on the playlist. 
Additionally, the positioning of chapter segments may 
change slightly.
≥Off: The points where chapters in playlists change are 
played accurately, but the picture may freeze for a 
moment.
NTSC Contents Output
Select PAL60 or NTSC output when playing NTSC discs.≥NTSC
: NTSC discs are played as NTSC.
≥PAL60:Select if picture is not displayed correctly when 
“NTSC” is selected.
Advanced operations
SCBT200&205EB_RQT9510-B.book  37 ページ  ２００９年５月２１日　木曜日　午後５時２２分
 
						

							38
RQT9510
Changing the unit’s settings
To select these settings, perform steps 1 – 5 (>37)
“Sound”
Dynamic Range Compression 
[BD-V] [AVCHD] [DVD-V] [DivX](Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (>55) for late night viewing.≥On≥Off≥Auto: Effective only when Dolby TrueHD is played.
Digital Audio Output 
≥Press [OK] to show the following settings.
Dolby D/Dolby D +/
Dolby TrueHDSelect whether Dolby Digital, 
Dolby Digital Plus, Dolby TrueHD, 
DTS Digital Surround, DTS-HD 
High Resolution Audio or 
DTS-HD Master Audio is output in 
“Bitstream” or “PCM” format.
≥Not making the proper settings 
may result in noise.
≥If the unit is connected with the 
HDMI AV OUT terminal, the 
specifications of the connected 
equipment take preference over this 
unit and audio selected in these 
items may not be output (e.g., when 
a television is connected, the HDMI 
audio output of this unit is limited to 
down-mixed 2ch.)
≥Bitstream:
Select “Bitstream” when the connected equipment can decode 
the respective audio format.
– Connect equipment supporting HDMI (High Bit rate Audio) and 
use a High Speed HDMI Cable in order to output high bit rate 
audio such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High 
Resolution Audio or DTS-HD Master Audio.
≥PCM:
Select “PCM” when the connected equipment cannot decode the 
respective audio format.
Refer to the operating instructions for connected devices to verify 
whether or not they can decode each of the audio formats. DTS/DTS-HD
MPEG Audio≥Bitstream: When connected to equipment with a built-in 
MPEG decoder.
≥PCM
: When connected to equipment without a built-in 
MPEG decoder.
BD-Video Secondary Audio 
[BD-V]
Turn on/off the clicking sound on the menu and audio with 
secondary video in picture-in-picture mode. (>21)≥On: The primary audio and secondary audio are mixed and 
output. The sampling frequency is converted to 48 kHz.≥Off: The clicking sound on the menu and secondary audio are not output.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or more.≥Signals are converted to 48 kHz despite the settings 
across in the following cases:
– when the signals have a sampling frequency of over 192 kHz– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”≥On: Signals are converted to 48 kHz. (Choose when the 
connected equipment cannot process signals with 
sampling frequency of 96 kHz.)
≥Off
: Signals are output as 96 kHz. (Choose when the 
connected equipment can process signals with sampling 
frequency of 96 kHz.)
Downmix
Switch the downmix system for playing back multi-channel surround sound.
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/
DTS-HD” is set to “Bitstream”, there are no downmix 
effects for the outputted audio.
≥The audio will be outputted in “Stereo” in the following cases.– AVCHD playback
– Playback of clicking sound on the menu and audio with 
secondary video in picture-in-picture mode≥Stereo
: When connected to equipment that does not 
support the virtual surround function.
≥Surround encoded: When connected to equipment that supports the 
conversion from 2 channels to multi channel 
surround.
High Clarity Sound 
When the analogue video terminal is not being used, the 
electrical current that flows through the analogue video 
circuit can be stopped. This prevents adverse effects on the 
audio signals and produces clearer sound.
≥This works only when “BD/DVD”, “SD” or “USB”is selected as the source.≥Set to “Enable” and then set “High Clarity Sound” on the 
on-screen menu to “On”. (>36)
≥Use this when outputting image via HDMI AV OUT terminal. 
Analogue image will not be output via COMPONENT 
VIDEO OUT terminal or VIDEO OUT terminal.
≥Enable≥Disable
SpeakerRefer to page 41
“Display”
On-Screen Messages
Choose whether to show status messages automatically.≥Automatic
≥Off
On-Screen Language
Choose the language for these menus and on-screen messages.
≥English≥Français≥Español
≥Deutsch≥Italiano≥Nederlands ≥РУССКИЙ
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to “On”, the masked-off area on the 
screen becomes grey.
[Only when connecting with an HDMI cable or a 
component video cable and “HDMI Video Format” (>39) 
is set to any other mode than “576p/480p”, or “Component 
Resolution” (
>39) is set to “720p” or “1080i”]
≥On:
If there is no operation for 5 minutes or more, the displayed screen 
switches to the other states automatically.
– When the Direct Navigator or START menu is displayed, the 
display returns to the screen saver mode.
– When CD or MP3 is played, the display returns to the screen 
saver mode. (Playback continues.)
– When still pictures are shown (except for slideshow), the display 
returns to the Direct Navigator screen.
≥Off
FL Display
Changes the brightness of the unit’s display.
– The brightness of the volume indicator (>6) is also changed.
≥Bright≥Dim: The display is dimmed.
≥Automatic: The display is dimmed, but brightens when you 
perform some operations.
Software LicenceInformation about the software used by this unit is displayed.
Advanced operations
SCBT200&205EB_RQT9510-B.book  38 ページ  ２００９年５月２１日　木曜日　午後５時２２分
 
						

							39
RQT9510
*1This function has no effect when S.SURROUND is selected during AUX (TV) playback.*2In this unit, a P4HD (>56) video processor is used to provide video of optimal resolution to the connected TV. “TV/Device Connection”
TV Aspect
Set to match the type of television connected.When connected to a 16:9 widescreen television:
≥16:9
:  Video recorded for 4:3 aspect screen is displayed as a 
4:3 ratio image in the centre of the screen.
When connected to a 4:3 aspect television:
≥4:3: Video recorded for a widescreen is played as Pan & Scan 
(unless prohibited by the producer of the disc). When 
playing BD-Video, video is output as “4:3 Letterbox”.
≥4:3 Letterbox:  Video recorded for a widescreen is played in the letterbox 
style.
Time Delay*1
When connected with a Plasma display, adjust if you 
notice the audio is out of sync with the video.≥Auto
 ≥0ms ≥20ms≥40ms≥60ms≥80ms≥100ms≥120ms≥140ms
When using VIERA Link “HDAVI Control” with “HDAVI Control 3” (or later) compatible 
TV (>29), select “Auto”. Audio and video will automatically be set in sync. – This works only when “BD/DVD”, “SD”, “USB” “AUX”,“D-IN1” (DIGITAL 
IN 1) or D-IN2” (DIGITAL IN 2) is selected as the source.(>29)
HDMI Connection
≥Press [OK] to show the following settings.
HDMI Video Mode
Select “On” when video is output from HDMI AV 
OUT terminal.≥
On: Images are output from the HDMI AV OUT terminal in the resolution set 
in “HDMI Video Format”. Video from COMPONENT VIDEO OUT 
terminal is output as “576i/480i”.
≥Off Images are output in the resolution set in “Component Resolution”.
HDMI Video Format*2
The items supported by the connected devices are 
indicated on the screen as “¢”. When any item 
without “¢” is selected, the images may be 
distorted.≥Automatic
: Automatically selects the output resolution best suited 
to the connected television (1080p, 1080i, 720p or 
576p/480p).
≥576p/480p≥720p
≥1080i≥1080p
– When outputting 1080p signal, we recommend using High Speed HDMI 
Cables that have the HDMI logo (as shown on the cover) and are less 
than 5.0 meters to prevent video distortion etc.
– To enjoy high definition video up-converted to 1080p, you need to connect the 
unit directly to 1080p compatible HDTV (High Definition Television). If this unit is 
connected to an HDTV through other equipment, it must also be 1080p 
compatible.
24p Output [BD-V] [DVD-V]
When this unit is connected to a TV supporting 
1080/24p output via an HDMI cable, this unit 
displays each frame at 1/24 second intervals – the 
same interval originally shot with the film camera.
≥When playing DVD-Video, set to “On” and then 
set “24p” in “Picture” (>36) to “On”.≥On: Images in 24p are output in 24p as they are. 
However,
–when video is being output at 24 frames, images from any other 
terminal than the 
HDMI AV OUT terminal may not be output 
properly.
–
[BD-V]: when images other than 24p are played, images are 
output at 60p.
≥Off
HDMI Output Range
Effective when connected to a device that only 
supports RGB output.≥Standard: The video is output as it is.
≥Enhanced:  When the black and white contrast of a video is low, the 
signal is enhanced to reproduce clear video.
HDMI Audio Output
This setting selects whether or not to output audio 
from HDMI.≥On: To output audio through the TV’s speakers or other devices.
≥Off
: To output audio through system speakers. (The audio is output 
using the settings of the main unit.)
VIERA Link
Set to use “HDAVI Control” function when 
connected with an HDMI cable to a device that 
supports “HDAVI Control”.≥On
:
≥Off: Select when you do not want to use “HDAVI Control”.
Power Off Link
Select the desired power off link setting of this unit for 
VIERA Link operation (>29). (This works depending 
on the settings of the connected VIERA Link “HDAVI 
Control” compatible equipment.)
≥Video/Audio: When the TV is turned off, this unit will turn off 
automatically.
≥Video: When the TV is turned off, this unit will turn off except 
during the following conditions:
– audio playback (
[CD] [MP3])
– iPod mode
– radio mode
– “AUX” or “D-IN1” (DIGITAL IN 1) mode (non-selected 
TV audio setting for VIERA Link)
– “D-IN2” (DIGITAL IN 2) mode (non-selected TV audio 
setting for CABLE/SAT)
Component Resolution*
2
This sets the video output resolution when using the 
COMPONENT VIDEO OUT terminal.≥576i/480i
≥576p/480p
≥720p≥1080i
480i, 480p: When playing NTSC discs
576i, 576p: When playing PAL discs
Even if you select “720p” or “1080i”, the video output resolution is 
restricted to “576p/480p” when DVD-Video discs, DivX and BD-Video 
discs recorded at a rate of 50 field per second are output from the 
COMPONENT VIDEO OUT terminals.
TV System
Change the setting to match the equipment you are 
connecting with.
≥If picture output is not smooth, change the setting.
≥When NTSC contents are played, they are 
outputted in the signal format specified in the 
“NTSC Contents Output”, irrespective of the 
settings here.≥NTSC: Select when connecting to a NTSC television. 
≥PA L
: Select when connecting to a PAL or multi-system 
television.
Advanced operations
SCBT200&205EB_RQT9510-B.book  39 ページ  ２００９年５月２１日　木曜日　午後５時２２分
 
						

							40
RQT9510
Changing the unit’s settings
To select these settings, perform steps 1–5(>37)
“Network Settings”
IP Address / DNS Settings (>33)
≥Press [OK] to show the following settings.
Connection Test— — — —
IP Address Auto-Assignment≥On
≥Off
IP Address— — —. — — —. — — —. — — —
Subnet Mask— — —. — — —. — — —. — — —
Gateway Address— — —. — — —. — — —. — — —
DNS-IP Auto-Assignment≥On
≥Off
Primary DNS— — —. — — —. — — —. — — —
Secondary DNS— — —. — — —. — — —. — — —
Connection Speed Auto-Config≥On
≥Off
Connection Speed Setting
This is enabled only when “Connection Speed 
Auto-Config” is turned “Off”.≥10BASE Half Duplex
≥10BASE Full Duplex
≥100BASE Half Duplex≥100BASE Full Duplex
Proxy Server Settings (>34)
≥Press [OK] to show the following settings.
Initialize≥Ye s≥No
Proxy Address(The initial setting is blank.)
Proxy Port Number(The initial setting is “0”.)
Connection Test— — — —
Network Service (>32) (VIERA CAST)
≥Press [OK] to show the following settings.
Network Lock
You can restrict using VIERA CAST.
Follow the on-screen instructions. Enter a 4-digit password 
with the numbered buttons when the password screen is 
shown. It will be the common password for “DVD-Video 
Ratings”, “BD-Video Ratings” and “Network Lock”.
≥Do not forget your password.≥On≥Off
Changing settings (When “On” is selected)
≥Change Password
Audio Auto Gain Control
Volume that is different depending on the contents is adjusted 
automatically to the standard volume while using the VIERA CAST.
≥Depending on contents, this function effect will not work.
≥Select “Off” when the audio is warped.
≥This function has no effect when Dolby PL II is 
activated. (>17)≥On
≥Off
Reduced Screen Display
The screen is displayed reduced so the displayed screen 
of the VIERA CAST does not get truncated.≥On≥Off
Time Zone
By selecting the time zone, it is possible to set the unit’s 
time to match your location.
≥Some VIERA CAST contents require the time zone to 
be set. Set the time zone if necessary.≥GMT -12 to +12
(The initial setting is “0”.)
GMT 0 l WET (Western European Time)GMT +1l CET (Central European Time)GMT +2l EET (Eastern European Time)
Summer Time
Select “On” when using Daylight Saving time.≥On≥Off
MAC Address (>33)
Displays the “MAC Address” of this unit.
“General”
Remote Control (>51)≥Set Code 1
≥Set Code 2
SMART SETUP (>14)
You can execute some essential settings for the unit.≥Ye s≥No
Default Settings
This returns all values in the Setup menu and the 
on-screen menu, except for “Remote Control”, “On-Screen 
Language”, “IP Address / DNS Settings”, “Proxy Server 
Settings”, “Network Service”, “DVD-Video Ratings” and 
“BD-Video Ratings” to the default settings.≥Ye s≥No
DivX Registration [DivX] (>22)
You need this registration code to purchase and play DivX Video-on-Demand (VOD) content.
Firmware Update (>32)
≥Press [OK] to show the following settings.
Automatic Update Check
When this equipment remains connected to the Internet, 
it will check for the latest firmware version when it is 
turned on and you can update it if necessary.≥On
≥Off
Update Now
You can update the firmware manually.≥Ye s≥No
Advanced operations
SCBT200&205EB_RQT9510-B.book  40 ページ  ２００９年５月２１日　木曜日　午後２時４７分