Panasonic Sc Bt200 Operating Instructions

RQT9508-1PPPC
2009/7/08
PX
Operating Instructions
Blu-ray Disc Home Theater Sound System
Model No. SC-BT303
SC-BT300
SC-BT203
SC-BT200
The illustration shows the image of the unit SC-BT300 with “P” indicated on the packaging.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for fu ture reference.
To...

2
RQT9508
Getting started 
Indicates features applicable to:
Accessories
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
(Product numbers correct as of June 2009. These may be subject to change.)
Only for U.S.A. and Puerto Rico: To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” 
on page 58.
For other areas: To order accessories, call the dealer from whom you have made your purchase.
≥These...

3
RQT9508
Getting started 
THE FOLLOWING APPLIES ONLY IN THE U.S.A.IMPORTANT SAFETY 
INSTRUCTIONS
Read these operating instructions carefully before using the unit. 
Follow the safety instructions on the unit and the applicable safety 
instructions listed below. Keep these operating instructions handy for 
future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do...

4
RQT9508
Getting started 
TV Radio Playback
Other devices
Advanced operations
Reference Optional speaker 
settings
Table of contents
Accessories ........................................................2
IMPORTANT SAFETY INSTRUCTIONS ............3
Control reference guide (remote control) ........5
Preparing the remote control............................5
Batteries ................................................................. 5
Use...

5
RQT9508
Control reference guide (remote control)
1Turn the unit on and off ( >19)
2 Display the Home screen of VIERA CAST ( >32)
3 Select title numbers, etc./Enter numbers or characters ( >20, 34)
(The character buttons may be used when operating VIERA CAST 
contents.  B 32)
[CANCEL] :  Cancel
4 Basic playback control buttons  (> 19, 20)
5 Select preset radio stations  (> 26)
6 Select surround sound effects ( >18)
7 Show Top Menu/Direct Navigator ( >19)
8 [3 ,4 ,2, 1]: Menu selection
[OK]: Selection
[...

6
RQT9508
Getting started 
Control reference guide (main unit)
1Standby/on switch (POWER Í/I) (> 19)
Press to switch the unit from on to standby mode or vice versa. In 
standby mode, the unit is still consuming a small amount of power.
2 Open or close the disc tray ( >19)
3 [BT300]  \BT303 [BT200] : SMART SETUP button ( >15)
[BT203] : EASY SETUP button ( >15)
4 St op  ( >19)
5 Start play ( >19)
6 Disc tray ( >19)
7 Connect iPod ( >30)
8 SD card slot ( >19)
9 [BT300]  \BT303 [BT200] : 
Connect Auto...

7
RQT9508
Assembling the speakers
[BT300] \BT303\  : Front speakers
Preparation≥ To prevent damage or scratches, lay down a soft cloth and perform 
assembly on it. ≥
For assembly, use a Phillips-head screwdriver (not included).
≥ For optional wall mount, refer to page 46.
≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or...

8
RQT9508
Positioning
Getting Started
How you set up your speakers can affect the bass and the sound field.
Setup examplePlace the front, center, surround and surround back speakers at approximately the same distance from the seating position. Using “SMART 
SETUP” (> 15) is a convenient way to get the ideal surround sound from your speakers when you are unable to place them. The angles in the  
diagram are approximate.
 
* It is recommended to place all the surround and surround back speakers at...

9
RQT9508
Speaker connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC power supply cord until all other connections are complete.
Setup example
*[BT300]  \BT303 : The speaker cables are attached to the speaker stands.
≥ Refer to the rear label of the speaker before connecting the appropriate cable.
≥ Pay attention to the type of speaker and the connector color when you place the speakers.
Connect to the main unit’s terminals of the...

10
RQT9508
TV connections
For connections with a video cable (> below)
For connections with a component video cable ( >11)
For connections with an HDMI cable ( >11)
My TV has COMPONENT VIDEO IN terminals and HDMI IN terminal. Which should I connect with?
≥The different levels of picture quality input are listed below in order from highest to lowest.
HDMI IN  )COMPONENT VIDEO IN  )VIDEO IN.
However, it will take longer for the picture output to start up when this unit is connected with the HDMI IN...