Panasonic Sc Bt100 Operating Instructions

RQT9129-PPPC
until 
2008/3/3
Operating Instructions
Blu-ray Disc Home Theater Sound System
Model No. SC-BT100
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
Region management information
BD-Video 
This unit plays BD-Video marked with labels containing the region code A.Example:
DV...

2
RQT9129
Accessory information
(For wireless system)The following mark and symbols are located on bottom of the unit.
THE FOLLOWING APPLIES ONLY IN CANADA.
Operations in these instructions are described mainly with the 
remote control, but you can perform the operations on the main 
unit if the controls are the same.SystemSC-BT100
Main unit SA-BT100
Front speakers SB-HF100
Center speaker SB-HC100
Surround speakers SB-HS100
Subwoofer SB-HW560
Digital transmitter SH-FX67T
Wireless system SE-FX67
Please...

3
RQT9129
Table of contents
Accessory information ..................................... 2
Preparing the remote control ........................... 3
IMPORTANT SAFETY INSTRUCTIONS............ 3
Control reference guide.................................. 10
Disc and card information .............................. 12
Basic play (Playing video contents) .............. 14
Enjoying TV with this unit’s speakers........... 17
Enjoying the FM/AM radio .............................. 18
Playing music...

4
RQT9129
STEP 1 Positioning
How you set up your speakers can affect the bass and the sound field. 
Note the following points:
≥Place speakers on flat secure bases.
≥Placing speakers too close to floors, walls, and corners can result in 
excessive bass. Cover walls and windows with thick curtains.[Note]
Keep your speakers at least 10 mm (13/32q) away from the system for 
proper ventilation.
Setup example
Place the front, center, and surround speakers at approximately the 
same distance from the seating...

5
RQT9129
∫Notes on speaker use≥Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be 
negatively affected.
≥You can damage your speakers and shorten their useful life if you 
play sound at high levels over extended periods.
≥Reduce the volume in the following cases to avoid damage:
– When playing distorted sound.
– When the speakers are reverberating due to a record player, noise 
from FM broadcasts, or continuous signals from an oscillator, test 
disc, or...

6
RQT9129
STEP 2 Basic connections
Preparation
∫Attach the speaker cable stickers to make connection 
easier.∫Set the surround selector at the rear of the wireless 
system to its center.
≥Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥Turn off all equipment before connection and read the appropriate operating instructions.
Speaker cables and transmitter connection
Digital transmitter Speaker cable for front 
speaker (L) (White)Speaker cable for front...

7
RQT9129
(Continued on the next page)
Connection to a TV
≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
With an HDMI cable
Please use High Speed HDMI cables that have the HDMI logo (as shown on the cover). 
It is recommended that you use Panasonic’s HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m/3.3 ft.), RP-CDHG15 (1.5m/4.9 ft.), RP-CDHG20 (2.0 m/6.6 ft.), 
RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc....

8
RQT9129
STEP 2 Basic connections
Radio antenna connections
≥Keep loose antenna cables away from other wires and cables.
Optional connections≥Using FM/AM outdoor antenna (optional) (>36).
AC power supply cord connections
Power consumption
The main unit and the wireless system consume a small amount of power when they are turned off (Main unit: approx. 0.3 W, wireless 
system: approx. 0.2 W). To save power when they are not to be used for a long time, unplug them from the household AC outlet.
You will...

9
RQT9129
STEP 3 Setting up the unit
Turn on the power of the main unit and the wireless system after all connections are complete.
When the system is switched on for the first time, a screen for the basic settings is displayed automatically. Follow the on-screen prompts to make 
basic settings for the system.
Turn on the main unit and wireless system
PreparationTurn on the TV and select the appropriate video input on the TV.
1Press [POWER CI,BÍ] on the wireless 
system.
≥AUTO OPERATION ON/OFF indicator...

10
RQT9129
Control reference guide
!Turn the unit on and off (>14)
@Select the source
[BD/SD]: Select disc drive or SD card drive (>14)
[FM/AM]: Select FM/AM tuner (>9, 18)
[iPod]: Select iPod as the source (>21)
#Numbered buttons
Select preset radio stations and title numbers, etc./Enter numbers 
(>15, 18)
$Cancel
%Basic playback control buttons (>14, 15)
[:, 9]: Select preset radio stations (>18)
[6, 5]: Select radio station manually (>18)
^Show on-screen menu (>30)
&Show Pop-up menu (>24)
*Show Top...