Home
>
Panasonic
>
Camera Accessories
>
Panasonic Remote Camera Controller Aw Rp50n Operating Instructions
Panasonic Remote Camera Controller Aw Rp50n Operating Instructions
Here you can view all the pages of manual Panasonic Remote Camera Controller Aw Rp50n Operating Instructions . The Panasonic manuals for Camera Accessories are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
Connections
Changing the IP address on the unit to match
the IP address of the remote camera or
switcher
[Remote camera settings] The unit sets the IP addresses for the remote
cameras that have been detected by associating
them with camera numbers whose connection
setting is set to “NoAsign”.
Connection settings:
On the [SYSTEM] menu, select [CAMERA CTL],
and then display items [CAM1] to [CAM100].
Setting or changing IP addresses:
On the [SYSTEM] menu, select [CAM IP ADR],
and then display...](http://img.usermanuals.tech/thumb/58/68248/w300_aw-rp50n_en_om_d-30.png "Page 31
31
Connections
Changing the IP address on the unit to match
the IP address of the remote camera or
switcher
[Remote camera settings] The unit sets the IP addresses for the remote
cameras that have been detected by associating
them with camera numbers whose connection
setting is set to “NoAsign”.
Connection settings:
On the [SYSTEM] menu, select [CAMERA CTL],
and then display items [CAM1] to [CAM100].
Setting or changing IP addresses:
On the [SYSTEM] menu, select [CAM IP ADR],
and then display...")
31 Connections Changing the IP address on the unit to match the IP address of the remote camera or switcher [Remote camera settings] The unit sets the IP addresses for the remote cameras that have been detected by associating them with camera numbers whose connection setting is set to “NoAsign”. Connection settings: On the [SYSTEM] menu, select [CAMERA CTL], and then display items [CAM1] to [CAM100]. Setting or changing IP addresses: On the [SYSTEM] menu, select [CAM IP ADR], and then display...
Page 32
32
Connections
3 Turn the F2 dial, select “Yes”, and then
press the F2 dial.
This starts the “Auto IP setting” process.
When “Auto IP setting” has been initiated, the
progress is shown by the number of displayed
dots which are reduced one by one.
AUTO SETUP
ttttt
When all the operations have been completed
successfully, “COMPLETE!” is displayed.
AUTO SETUP
COMPLETE!
The remote cameras can now be operated from
the unit.
The function for linking the switcher with the unit
becomes...
Page 33
![Page 33
33
Connections
Changing the IP addresses
of the camera numbers
controlled by the unit
Use the steps below when connecting the remote
cameras (thorough a router) whose IP addresses
cannot be set by following the steps in “Auto IP
setting”.
Setting the IP addresses
On the [SYSTEM] menu, select [CAM IP ADR], and
display [IP:CAM1] to [IP:CAM100]. The IP addresses
of the camera numbers can now be changed.
Even when “NoAsign” or “Serial” has been selected
as the [CAM1] to [CAM100] setting of...](http://img.usermanuals.tech/thumb/58/68248/w300_aw-rp50n_en_om_d-32.png "Page 33
33
Connections
Changing the IP addresses
of the camera numbers
controlled by the unit
Use the steps below when connecting the remote
cameras (thorough a router) whose IP addresses
cannot be set by following the steps in “Auto IP
setting”.
Setting the IP addresses
On the [SYSTEM] menu, select [CAM IP ADR], and
display [IP:CAM1] to [IP:CAM100]. The IP addresses
of the camera numbers can now be changed.
Even when “NoAsign” or “Serial” has been selected
as the [CAM1] to [CAM100] setting of...")
33 Connections Changing the IP addresses of the camera numbers controlled by the unit Use the steps below when connecting the remote cameras (thorough a router) whose IP addresses cannot be set by following the steps in “Auto IP setting”. Setting the IP addresses On the [SYSTEM] menu, select [CAM IP ADR], and display [IP:CAM1] to [IP:CAM100]. The IP addresses of the camera numbers can now be changed. Even when “NoAsign” or “Serial” has been selected as the [CAM1] to [CAM100] setting of...
Page 34
![Page 34
34
Connections
Changing the camera
numbers
The camera numbers which have been set by “Auto IP
setting” can be changed.
They are changed by replacing the IP addresses of the
current camera numbers with the IP addresses of the
camera numbers to be changed.
1 On the [SYSTEM] menu, select
[CAMASSIGN], and display [CAM1] to
[CAM100]. Then select the camera number
to be changed.
2 Select the IP address of the remote
camera for the selected camera number.
The tally indicator of the remote camera...](http://img.usermanuals.tech/thumb/58/68248/w300_aw-rp50n_en_om_d-33.png "Page 34
34
Connections
Changing the camera
numbers
The camera numbers which have been set by “Auto IP
setting” can be changed.
They are changed by replacing the IP addresses of the
current camera numbers with the IP addresses of the
camera numbers to be changed.
1 On the [SYSTEM] menu, select
[CAMASSIGN], and display [CAM1] to
[CAM100]. Then select the camera number
to be changed.
2 Select the IP address of the remote
camera for the selected camera number.
The tally indicator of the remote camera...")
34 Connections Changing the camera numbers The camera numbers which have been set by “Auto IP setting” can be changed. They are changed by replacing the IP addresses of the current camera numbers with the IP addresses of the camera numbers to be changed. 1 On the [SYSTEM] menu, select [CAMASSIGN], and display [CAM1] to [CAM100]. Then select the camera number to be changed. 2 Select the IP address of the remote camera for the selected camera number. The tally indicator of the remote camera...
Page 35
35 Selecting the remote cameras to be operated Up to five remote cameras to be operated can be selected using the CAMERA STATUS/SELECTION buttons. When one of the CAMERA STATUS/SELECTION buttons 1 to 5 is pressed, the indicator of the corresponding button lights. The statuses of the remote cameras assigned to CAMERA STATUS/SELECTION buttons 1 to 5 can be identified by the lighting statuses of the indicators above the buttons. R/B GAIN R/B PEDSYSTEM SETUP CAMERA SCENE/MODEDETAILDELETESTORE PAGE...
Page 36
![Page 36
36
Selecting the remote cameras to be operated
Up to 100 cameras can be divided into 1 to 20 groups
by menu operations, and controlled by the unit.
The selection procedure is described below.
1 Set the MENU button to ON.
Press the MENU button and light its indicator.
2 Set the PRESET MEMORY/MENU 8 button
(CAMERA) to ON.
When the button is pressed and its indicator is
lighted, the [CAMERA] menu is displayed on the
LCD panel.
3 Press the F1 dial.
The GROUP SELECT item is displayed.
[1]GROUP ▼...](http://img.usermanuals.tech/thumb/58/68248/w300_aw-rp50n_en_om_d-35.png "Page 36
36
Selecting the remote cameras to be operated
Up to 100 cameras can be divided into 1 to 20 groups
by menu operations, and controlled by the unit.
The selection procedure is described below.
1 Set the MENU button to ON.
Press the MENU button and light its indicator.
2 Set the PRESET MEMORY/MENU 8 button
(CAMERA) to ON.
When the button is pressed and its indicator is
lighted, the [CAMERA] menu is displayed on the
LCD panel.
3 Press the F1 dial.
The GROUP SELECT item is displayed.
[1]GROUP ▼...")
36 Selecting the remote cameras to be operated Up to 100 cameras can be divided into 1 to 20 groups by menu operations, and controlled by the unit. The selection procedure is described below. 1 Set the MENU button to ON. Press the MENU button and light its indicator. 2 Set the PRESET MEMORY/MENU 8 button (CAMERA) to ON. When the button is pressed and its indicator is lighted, the [CAMERA] menu is displayed on the LCD panel. 3 Press the F1 dial. The GROUP SELECT item is displayed. [1]GROUP ▼...
Page 37
37 Appearance Unit: mm (inch) POWER ALARMF1 CAMERA OSD R/B GAIN R/B PED SYSTEM SETUP CAMERA SCENE/MODEDETAILDELETE STORE PAGE MENU F2 EXIT USER2 USER1 PT ACTIVE AUTO IRIS AUTO HI LOWPTZ/FOCUS SPEED PAN/TILT FOCUS/PUSH OTAF TELE ZOOM WIDE CAMERA STATUS / SELECTION PRESET MEMORY / MENU GAIN/PED F2 F1 123 AWB/ABB 4 SHUTTER 5 12345 678910 SIGNAL GND TALLY/GPITO PAN/TILT HEAD 54321 SVPOWER ON BOOT NM12V INLAN 189 (7-7/16) 177 (6-15/16) 210 (8-1/4) 53 (2-1/16) 67 (2-5/8)...
Page 38
![Page 38
38
Specifications
Power requirements: DC 12 V 10 %
(AC adapter provided)
Current consumption: 0.5 A (DC 12 V)
GENERAL
Ambient operating temperature:
0 °C to +40 °C (32 °F to 104 °F)
Allowable humidity ranges:
10 % to 90 % (no condensation)
Mass:
Approx. 1.1 kg (2.43 lbs.)
Dimensions (W H D):
210 67 177 mm
(8-1/4 2-5/8 6-15/16)
[excluding protrusions]
Input/Output connector
LAN (RJ-45):
10BASE-T/100BASE-TX
Connecting cable: LAN cable, max. 100 meters
(328 ft.)
When the...](http://img.usermanuals.tech/thumb/58/68248/w300_aw-rp50n_en_om_d-37.png "Page 38
38
Specifications
Power requirements: DC 12 V 10 %
(AC adapter provided)
Current consumption: 0.5 A (DC 12 V)
GENERAL
Ambient operating temperature:
0 °C to +40 °C (32 °F to 104 °F)
Allowable humidity ranges:
10 % to 90 % (no condensation)
Mass:
Approx. 1.1 kg (2.43 lbs.)
Dimensions (W H D):
210 67 177 mm
(8-1/4 2-5/8 6-15/16)
[excluding protrusions]
Input/Output connector
LAN (RJ-45):
10BASE-T/100BASE-TX
Connecting cable: LAN cable, max. 100 meters
(328 ft.)
When the...")
38 Specifications Power requirements: DC 12 V 10 % (AC adapter provided) Current consumption: 0.5 A (DC 12 V) GENERAL Ambient operating temperature: 0 °C to +40 °C (32 °F to 104 °F) Allowable humidity ranges: 10 % to 90 % (no condensation) Mass: Approx. 1.1 kg (2.43 lbs.) Dimensions (W H D): 210 67 177 mm (8-1/4 2-5/8 6-15/16) [excluding protrusions] Input/Output connector LAN (RJ-45): 10BASE-T/100BASE-TX Connecting cable: LAN cable, max. 100 meters (328 ft.) When the...
Page 39
Memo @53#@831/@#BTJDT@&OHMJTIJOEE @53#@831/@#BTJDT@&OHMJTIJOEE
Page 40
F0610Y1070 D © Panasonic System Networks Co., Ltd. 2010 @53#@831/@#BTJDT@&OHMJTIJOEE @53#@831/@#BTJDT@&OHMJTIJOEE