Panasonic Pvhs2000 Operating Instructions Manual

11
Connecting a Cable Box to
the Hard Disk Recorder
1. Connect the incoming television signal to the IN
jack on your cable box.
2. Connect the RF cable from the OUT jack on your
cable box to the ANT/CATV IN jack on the Hard
Disk Recorder.
3. Attach the cable box controller. See “Satellite
Receiver and Cable Box Controllers” on page 10.
4. Follow the B ~ E instructions on page 9 for A/V
connection, telephone connection, AC power
connection, and setup.
NOTES
• If your cable box has A/V OUT jacks, connect...

12
Connecting a Cable Box and
an A/V Receiver to the Hard
Disk Recorder
1. Connect the incoming television signal to the IN jack on
your cable box.
2. Connect the RF cable from the OUT jack on your cable
box to the ANT/CATV IN jack on the Hard Disk
Recorder.
3. Connect an A/V cable from the OUTPUT jacks on the
Hard Disk Recorder to the IN jacks on your A/V
receiver, matching like colors.
4. Connect an A/V cable from the OUTPUT jacks on your
A/V receiver to the AUDIO/VIDEO IN jacks on your TV,
matching...

13
NOTES
• Leave the yellow video cable unattached on your satellite
receiver, the Hard Disk Recorder and television.
• Refer to your TV or satellite receiver owner’s manual for more
information on connecting to these components.
Connecting a Satellite
Receiver to the Hard Disk
Recorder (Using S-Video)
1. Connect the incoming television signal to the IN jack
on your satellite receiver.
2. Connect the red and white Audio plugs of an A/V
cable from the AUDIO OUT jacks on your satellite
receiver to the LINE...

14
Advanced Connections (continued)
Connecting a Cable Box,
Satellite Receiver, and VCR
to the Hard Disk Recorder
1. Connect an A/V cable from the AUDIO/VIDEO
OUT jacks on your cable box to the INPUT jacks
on the Hard Disk Recorder, matching like colors.
2. Connect an A/V cable from the AUDIO/VIDEO
OUT jack on your satellite receiver to the INPUT
jack on the Hard Disk Recorder, matching like
colors.
3. Connect an A/V cable from the OUTPUT jacks
on the Hard Disk Recorder to the AUDIO/VIDEO
IN jacks on...

15
Connecting a Cable Box,
Satellite Receiver, A/V
Receiver, and VCR to the
Hard Disk Recorder
1. Connect an RF cable from the OUT jack on your
cable box to the ANT/CATV IN jack on the Hard
Disk Recorder.
2. Connect an A/V cable from the AUDIO/VIDEO
OUT jacks on your satellite receiver to the
INPUT jacks on the Hard Disk Recorder,
matching like colors.
3. Connect an A/V cable from the OUTPUT jacks
on the Hard Disk Recorder to the AUDIO/VIDEO
IN jacks on your VCR, matching like colors.
4. Connect a second...

16
Advanced Connections (continued)
• Refer to your TV owner’s manual for more information
on making connections to your television.
Watching One Show While
Recording Another on the
Hard Disk Recorder
Use a cable splitter and attach RF cables to both the Hard
Disk Recorder and your television if you want to watch one
show while recording another show on the Hard Disk
Recorder.
1. Connect the incoming RF cable from the wall to the
IN jack on the 2-way splitter.
2. Connect an RF cable from one OUT jack on...

17
Connecting and Setting Up the IR Blaster
If your satellite receiver has a serial connector, use the serial connector instead of
the IR blaster. The IR blaster acts as a remote control for your other device. Before
attaching the IR blaster, you must find the infrared detector on the device the Hard
Disk Recorder will control.
Locating the Infrared Detector On the Other DeviceThe emitter on the end of the IR blaster must be placed directly over the infrared
detector on the other device. The infrared...

18
Initial Setup1
Turn on the television.
2Press  HARD DISK RECORDER , then press
POWER  to turn on the Hard Disk Recorder.
• You can also press POWER on the front of the unit to turn the
Hard Disk Recorder on.
• The QuickSetup screen appears.
• If you can’t see the QuickSetup screen, press the TV/VIDEO button on your television remote until you do. Your television
may also need to be on a specific channel to display input
from other devices. See “Troubleshooting” on pages 50~52 if
you still can’t see...

19
8The Hard Disk Recorder calls the ReplayTV Service
to retrieve local telephone numbers and TV channels.
• You are notified of the progress of the connection, and if anyerrors occur during the connection.
• This connection to the ReplayTV Service lasts about 5 minutes.
• The internal Hard Disk Recorder clock and time zone are set during this connection.
• This connection also provides the Hard Disk Recorder with TV channel information for your local area.
PLAY
REW
Continued on the next page.
9Press  /...

20
The Hard Disk Recorder connects to the ReplayTV Service to
complete the setup. This connection lasts approximately 20
minutes, during which the Hard Disk Recorder receives
channel and program information for your local area.
Once the connection is completed, you will be able to use the
Hard Disk Recorder.
13To change a setting...
a.Press  /  to select the option, then press  PLAY
to display the screen that you want to change.
b. After your change is finished, press  PLAY to
finish the setup.
If you...