Panasonic Pv L751 Operating Instructions Manual

31
Special Features
Motion Security may mistakenly start
when:
• background is plain, like a white wall, or
has distinct vertical, horizontal, or
slanted stripes, like a venetian blind.
• brightness suddenly changes.
Motion Security may not start when:
• motion is very slow or fast.
• moving object is very small.
• motion occurs only in 1 corner of
viewing area.
• in poor lighting (in this case, MOTION
SECURITY flashes).
• background is plain, like a white wall, or
has distinct horizontal or vertical...

32For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
SELECT :  PUSH  /  KEY
SET :  PUSH  D I SPLAY  KEY
END :  PUSH  MENU  KEY
---  MENU  ---   PAGE  1 / 2PROGRAMMED  REC
T I TLE;  AUTO/MANUAL
SHUTTER ;  AUTO
STAND-BY  RELEASE  ;  OFF
CLOCK  SET
Automatic/Manual Title Display List
Automatic Title
Camcorder auto-displays title greeting on
selected holidays when power is first
turned on. See title list below.
Intelligent Titler
1Press MENU for
MENU...

33
Special Features
Intelligent Titler
Manual Title
1Confirm that TITLE:
AUTO/MANUAL is set
in Menu mode (
steps
1~3, page 32).
2In Record/Pause mode, press TITLE
repeatedly to display titles from list on
page 32.
3To record the title, Press RECORD/
PAUSE.
4Press TITLE while recording to remove
title.
Note:
• To redisplay title, press 
TITLE in Record/
Pause mode.
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).
• Set POWER to CAMERA.
(no indication)...

34For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Digital Still Camera
CompactFlash Card
Insertion/ RemovalBefore you begin...
• Connect Camcorder to power source.
• Set POWER to OFF.
The captured images will be stored on this
CompactFlash Card.
Be sure to insert the CompactFlash Card
before using the Built-in Digital Still Camera.
1Slide TAPE EJECT to open door.
2Insert the CompactFlash Card into
the CompactFlash Card Slot in the
direction of the...

35
Special Features
Note:
• Please note that the included 8 MB
CompactFlash Card already contains
12 pre-recorded titles for your use.
Please see page 41 for further details.
• If CompactFlash Card is not inserted,
“NO CF CARD” appears on-screen.
Set POWER to OFF, then insert the
CompactFlash Card.
• If “CF CARD ERROR” appears on-
screen, see page 56.
• Sound will not be recorded.
• The features below are not available
while in PHOTO mode.
• Auto Fade • Digital Fade
• Color Digital Filter • Digital Zoom...

36For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Digital Still Camera
Using the LightBefore you begin...• Connect Camcorder to power source.
• Insert the CompactFlash Card (page 34).
• Set POWER to PHOTO.
Set LIGHT to AUTO.
When 
RECORD/PAUSE is pressed to
capture an image in dim lighting, the Light
comes on for about 2 seconds, the image
is captured, then the light goes out.
Or, set 
LIGHT to ON/OFF manually.
(See page 15 for further details.) For...

37
Special Features
Digital Still Camera
Displayed Directory/Image
NumberBefore you begin...
• Connect Camcorder to power source.
• Insert the CompactFlash Card (page 34).
• Set POWER to PHOTO.
1Repeat steps 1 and 2 on page 36 to
display Multi Image Playback screen.
Select any image and press 
PLAY.
2Press MENU for DCF NUMBER
DISPLAY menu.
Press 
UP or DOWN to select ON
or OFF. Then, press DISPLAY to set.
ON  Directory/Image Number is
displayed.
OFFDirectory/Image Number is not
displayed.
SELECT :...

38For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Deleting All Image Pages
All image pages are deleted from memory.
YES        :  PUSH  DEL  KEY
CANCEL :  PUSH  STOP  KEY
1                 2                3
4                 5                6
DELETE ALL
ARE YOU SURE ?
Deleting Specific Image Pages
Delete older images to make room for new
ones.
Before you begin...
• Connect Camcorder to power source.
• Insert the CompactFlash Card (page 34).
• Set...

39
Special Features
Picture in Picture Wipe Title
Captured still images (page 35) can be
recorded along with the current picture.
Before you begin...
• Connect Camcorder to power source.
• Insert the CompactFlash Card (page 34).
• Set POWER to CAMERA.
1Set DIGITAL SELECT to DIGITAL
WIPE.
• A still image captured on the CF
card and the Multi image playback
page number is displayed on the
right side of the screen.
• If there are no recordings on the
card, “NO PICTURE” appears on-
screen.
2Press + (FF) or -...

40For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Digital Still Camera
Insert a captured still image into the
current recording, or vice versa, in one of
three wipe effects.
1Repeat steps 1 and 2 on page 39 to set
Picture in Picture Wipe title.
2Press MODE repeatedly for Wipe
effect 1, 2, or 3 (See left).
• WIPE 1 will flash for a while to store
the image for the wipe.
3Press START:
once inserts captured image.
twice inserts current recording...