Panasonic Pv L452 Operating Instructions Manual

Basic Operation
Special Features
For Your Information Getting Started
Camcorder
Operating Instructions
Please read these instructions carefully before attempting to operate this product.
Please save this manual.
Guía para rápida consulta en español está incluida.
 Models No.
LSQT0529C
PV-L452
PV-L652
(PV-L652 shown)
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] 

2For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Things You Should Know
Thank you for choosing Panasonic!
You have purchased one of the most
sophisticated and reliable products on the
market today. Used properly, it will bring
you years of enjoyment. Please take time
to fill in the information to the right.
The serial number is on the tag located on
the rear side of your Camcorder. Be sure
to retain this manual as your convenient
Camcorder information...

3
Getting StartedSafety Precautions
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Your Compact VHS Camcorder is designed to record and play back in Standard Play (SP)
and Super Long Play (SLP) modes. You can also play a Compact VHS Camcorder
recording on your VHS VCR using the supplied VHS PlayPak.
This Camcorder is equipped with the HQ System to provide excellent video pictures, and
is compatible with standard VHS equipment.
It is recommended that only...

4For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1. Read Instructions – All the safety and
operating instructions should be read before
the unit is operated.
2. Retain Instructions – The safety and
operating instructions should be retained for
future reference.
3. Heed Warnings – All warnings on the unit
and in the operating instructions should be
adhered to.
4. Follow Instructions – All operating and
maintenance instructions should be followed.
5....

5
Getting Started
USE & LOCATIONTO AVOID SHOCK HAZARD ...  Your Camcorder and power supply should not be exposed to rain or moisture.
Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed for
outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct
splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts of your
Camcorder. Do not attempt to...

6For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Table of Contents
Viewfinder/LCD Monitor Indications ....................................................... 46~48
Operation Notes 
(Cleaning EVF)........................................................................... 49
Notice ............................................................................................................... 49
Replacing Clock Battery...

7
Getting Started
Self Demo Mode
EVF or LCD Monitor
Note:
 Self Demo stops automatically if battery
is attached (page 9) and cassette tape is
inserted (page 11).
 Inserting a tape alone (or attaching a
partially charged battery) only temporarily
stops Self Demo.
 Self Demo stops for 30 seconds when the
Light is pressed.
To turn Self Demo back on:
 Set to SELF DEMO : ON in MENU screen.
Before you begin...
 Connect Camcorder to power source.
Self Demo mode is on when the screen
below appears. To turn...

8For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Quick Operation Guide
When the LCD monitor is open, the EVF automatically turns OFF (Color EVF model only)
(page 20).
1Press LCD-OPEN to unlock the LCD monitor.
Swing it fully open and adjust the angle.
2Set POWER to CAMERA.
3Press RECORD/PAUSE
to start recording.
Press RECORD/PAUSE
again to pause recording. When the LCD monitor is open, the EVF automatically turns OFF (Color EVF model only)
(page 17)....

9
Getting Started
Supplying Power
To use battery refresh, insert Battery on AC
Adaptor (see steps 1~2 above), then press
BATTERY REFRESH.
The REFRESH Lamp lights, then goes out when
discharge is complete. Battery charging will then
start automatically.
If 
BATTERY REFRESH is pressed by mistake,
remove Battery from AC Adaptor and reinsert it
for normal charging.
Note:
 Charging takes about 7 and 1/2 hours when
Battery Refresh is used.
 Battery will not operate in extremely high
temperatures.
Note:...

10For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Supplying Power
Caution: Charge only with specified charger.
 Battery can be charged within a temperature range of
10 °C (50 °F) and 35 °C (95 °F).
 Battery is normally warm after charging or just after use.
 Do not use an insufficiently charged or worn-out Battery.
Safety precautions: Do not get Battery near, or dispose of in, fire.
 Do not directly connect (short circuit) the positive (+)
and...