Panasonic Pv Gs65 Operating Instructions Manual

Record mode
31LSQT0860
Tele-macro function
By focusing only on the subject and blurring the 
background, the image can be impressive. This 
Camcorder can focus on the subject at a distance 
of approx. 16 inches (40 cm).
≥Set to Tape/Card Recording Mode.
1Press the joystick until the icon 1 appears.2Move the joystick up to select the 
tele-macro icon [ ].
≥If the magnification is 10k or less, then it is 
automatically set to 10k.
ª
To cancel the tele-macro functionSelect the [ ] icon again.
≥If a sharper...

Record mode
32LSQT0860
Self-timer recording
You can record still pictures on a card using the 
timer.
≥Set to Card Recording Mode.
1Set [BASIC] >> [SELF TIMER] >> [YES].2Press the [PHOTO SHOT] button.
≥After the recording lamp and the [ ] 
indication flashes for approx. 10 seconds, 
recording will start. After recording, the 
self-timer will be canceled.
ª
To stop the timer midway throughPress the [MENU] button.
≥By operating the [OFF/ON] switch or mode dial, 
the self-timer standby mode is canceled.
≥If...

Record mode
33LSQT0860
RapidFire Consecutive Photoshot
Records still pictures continuously at a certain 
interval.
≥Set to Card Recording Mode.
1Set [BASIC] >> [PICTURE SIZE] >> [640].2Set [ADVANCE] >> [BURST MODE] >> [ON].
3Press and hold the [PHOTO SHOT] button.
ª
To stop RapidFire Consecutive 
Photoshot midway through
Release the [PHOTO SHOT] button.
≥The Camcorder records up to 10 still pictures at 
intervals of 0.5 seconds. If the shutter speed is 
manually set to 1/30, then the still pictures can...

Record mode
34LSQT0860
ªTo cancel the scene mode functionSet [BASIC] >> [SCENE MODE] >> [OFF] or set 
the [AUTO/MANUAL/FOCUS] switch to [AUTO].
Sports mode
≥For slow-motion playback or playback pause 
of recorded pictures, this mode helps 
diminish camera shake.
≥During normal playback, the image 
movement may not look smooth.
≥Avoid recording under fluorescent light, 
mercury light or sodium light because the 
color and brightness of the playback image 
may change.
≥If you record a subject illuminated...

Record mode
35LSQT0860
ªTo set the white balance manuallySelect [ ] in Step 3. Then, while viewing a 
white subject on the entire screen, move the 
joystick up to select the [ ] indication.
ª
About flashing of the [ ] indicationWhen the manual adjustment mode is 
selected
≥Flashing indicates that the white balance 
previously adjusted is stored. This setting is 
stored until the white balance is adjusted again.
When white balance cannot be set in the 
manual adjustment mode
≥White balance may not be...

Record mode
36LSQT0860
Manual shutter speed/aperture 
adjustment
Shutter Speed
Adjust it when recording fast-moving subjects. 
Aperture
Adjust it when the screen is too bright or too dark.
≥Set to Tape/Card Recording Mode.
1Set the [AUTO/MANUAL/FOCUS] switch to 
[MANUAL].
2Move the joystick down until the shutter 
speed indication or aperture value 
indication appears.
1) Shutter speed
2) (Aperture) Iris/gain value
3Move the joystick left or right in order to 
adjust the shutter speed or aperture.
ª
To...

Playback mode
37LSQT0860
Playback mode
Playing back tape
≥Set to Tape Playback Mode.
1Operate with joystick.
1/;: Playback/Pause
6: Rewind/Review playback (Reverts to 
playback with the 1/; icon.) 
5: Fast forward/Cue playback (Reverts to 
playback with the 1/; icon.) 
∫:Stop
≥During cue/review playback, fast-moving 
images may show noise as a mosaic.
≥Before and after cue/review playback, the 
screen may become blue for a moment or 
images may be distorted.
ª
To adjust volumeAdjust the speaker or...

Playback mode
38LSQT0860
Frame-by-frame playback1During playback, press the [;] button on 
the remote control.
2Press the [E] button or the [D] button on 
the remote control.
≥Pushing the [s/VOLr] lever towards [T] 
(normal direction) or towards [W] (reversed 
direction) of this Camcorder during playback 
pause also turns into the frame-by-frame 
playback. If you keep pushing the lever, then 
the images will continuously be played back 
frame by frame.
ª
To return to normal playbackPress the [1] button...

Playback mode
39LSQT0860
Playback on TV
Images recorded by this Camcorder can be 
played back on a TV.
≥Insert a recorded tape into this Camcorder.
1Connect the Camcorder to a TV.
≥Connect the Camcorder and the TV by using 
the AV cable 1.
≥If the TV has an S-Video terminal, then also 
connect an S-Video cable 2 (optional). An 
S-video connection allows you to enjoy a 
higher quality image.
2Turn on this Camcorder and set the mode 
dial to the Tape Playback Mode.
3Select the input channel on the TV.4Move...

Playback mode
40LSQT0860
ªTo display multiple playback filesMultiple files on the card (6 files on 1 screen) are 
displayed.
1Move the [s/VOLr] lever to switch the 
images.
Towards [r]: Full-screen display
(Displays 1 image.) 
Towards [s]: Multi-screen display
(Displays 6 files on 1 screen.) 
≥In the multi-screen display,
≥Move the joystick to select a file (The 
selected file will be encircled by a yellow 
frame) and press it. The selected file is 
full-screen displayed.
≥If there are 7 files or more,...