Home > Panasonic > Digital Camcorder > Panasonic Pv Gs34 Operating Instructions Manual

Panasonic Pv Gs34 Operating Instructions Manual

Here you can view all the pages of manual Panasonic Pv Gs34 Operating Instructions Manual. The Panasonic manuals for Digital Camcorder are available online for free. You can easily download all the documents as PDF.

Page 41

41
With a PC
4  Double click the “NO_NAME” icon.•  You can view images stored on the Memory 
Card and also save them to your hard disk.
•  Please do not change file or folder names on the 
Personal Computer. The images on the Memory 
Card may not be able to be viewed on the 
Camcorder.
3  Connect the Camcorder to your Macintosh 
with USB Cable.
„ For  Macintosh
1  Insert the Memory Card into the Camcorder.
2  Set the Camcorder to PC Mode.
To Disconnect USB Cable Safely
„ For  WindowsIf USB Cable is...

Page 42

42
With a PC
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
•  When Camcorder power is turned OFF.
•  When SD Memory Card is removed.
•  When Mode Dial is turned to change modes.
This feature can be used only if both parties are 
using the same operating system. Please see 
chart below.
[Send] [Receive] [Software]
Windows XP← OK →Windows XPWindows 
Messenger
Windows XP← NG →Windows 
98SE/Me/2000
Windows 
98SE/
Me/2000← OK →Windows...

Page 43

43
With a PC
3  Click the [Video Stream Driver].•  The set up program starts running.
4  For Windows XP users:  Depending on your system environment, 
installation of “DirectX9.0b” may be 
required. Click [Yes] and continue with 
installation.
•  After “DirectX9.0b” is installed, the computer will 
restart.
•  Do not remove the CD-ROM.
5  Finish installation by following the 
on-screen instructions.
•  Click [Next] and proceed with installation.
•  After completing the installation, click [Finish].
6...

Page 44

44
With a PC
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
2  Select [.NET Messaging Service] and click 
[OK].
3  Click [Next] when the [.NET Passport 
Wizard] dialog appears.
When starting the Windows Messenger for the first 
time, its setup screen is displayed. (However, the 
screen is not displayed if the Windows Messenger 
setup has already been done.) For more details, 
please read the corresponding Help file.
1  Click [Click...

Page 45

45
With a PC
2  Type in your Sign-in name and password.•  If you do not have your Sign-in name and 
password, click [Get one here].
3  Please carefully read the displayed 
contents and then proceed.
4  After the setup is completed, sign in and 
start the MSN Messenger.
5  Click on [Audio Tuning Wizard...] in the 
[Tools] menu to confi rm that equipment is 
connected correctly.
6  Select [USB Audio Device] in the 
[Microphone] menu.
When starting the MSN Messenger for the first time, 
its setup screen is...

Page 46

46
With a PC
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
•  For other information about MSN Messenger, please 
refer to Help.
•  If the Camcorder is used as a Web Camera 
continuously for two hours, the communication is 
automatically shut OFF. In this case, restart MSN 
Messenger and set up the communication again.
•  When access is finished, close MSN Messenger, 
then turn off the Camcorder. Finally, disconnect the 
USB Cable.
8...

Page 47

47
With a PC
3 Click [ArcSoft].
4  Select the desired language on the [Choose 
Setup Language] dialog, and click [OK].
• Installation begins.
•  After reading the displayed contents, please 
carry out the installation according to 
instructions.
•  If a language other than the OS language is 
selected, the characters may not be presented 
correctly.
•  Installation will be completed.
„ For  Macintosh
1  Turn on computer and start up Macintosh.
2  Insert the CD-ROM into the CD-ROM drive.
3  Double click...

Page 48

48
With a PC
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Notes
•  Macintosh is a registered trademark of Apple 
Computer, Inc.
•  ArcSoft, the ArcSoft logo, ArcSoft PhotoImpression 
4, ArcSoft PhotoBase 4 and PhotoBase2 are 
trademarks of ArcSoft, Inc.
• Microsoft
® Windows®, Windows Messenger®, MSN 
Messenger® and DirectX® are either trademarks or 
registered trademarks of the Microsoft Corporation in 
the United States and/or...

Page 49

49
With a PC
•  When a Card with data recorded on it is inserted into 
a personal computer, folders will be displayed as 
shown in the following figure.
[100CDPFP]:
The images (IMGA0001.JPG, etc.) in this folder are 
recorded in the JPEG format.
[MISC]:
Files in which DPOF Data has been set to the image 
are in this folder.
•  [DCIM], etc. are necessary items in the folder 
structure. They have nothing to do with actual 
operations.
•  In the Card Mode, the Camcorder automatically 
saves file numbers...

Page 50

50
Others
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Others
Indications
Various functions and the Camcorder status are 
shown on the screen.
 :  Remaining Battery Power
•  Along with the reduction of the battery capacity, the 
display will change: 
 →  →  →  
→ . If the battery discharges, then  () 
will flash.
R0:45 :  Remaining Tape Time
•  Remaining tape time is indicated in minutes. (When 
it reaches less than 3 minutes, the...
Start reading Panasonic Pv Gs34 Operating Instructions Manual

Related Manuals for Panasonic Pv Gs34 Operating Instructions Manual

All Panasonic manuals