Panasonic Pv Gs2 Operating Instructions Manual

							11
Before Use
25
26
2728
30
29
25Cassette Holder
26Cassette Compartment Cover (p. 15)
27USB Jack [  ] (pp. 45-46, 48, 51)
28DV Input/Output Terminal (pp. 42-43)•   Connect this to the digital video equipment.
29White Balance Sensor (p. 28)
Remote Control Sensor (p. 13)
30Audio-Video Output Jack [AV OUT]
(pp. 40, 42)
Headphone Jack [PHONES]
•   Connecting an AV Cable to this jack activates 
the Camcorder’s built-in speaker, but 
connecting a headphone, etc. deactivates it.
•   When connecting the pin plug of the AV Cable 
to this jack, plug it in as far as it goes.
•   When using headphones, set [INITIAL] >> [AV 
JACK] >> [OUT/PHONES].
32Eyepiece Corrector Knob (p. 16)
33Photoshot Button [PHOTO SHOT] (p. 23)
34Cassette Eject Lever [OPEN/EJECT] (p. 15)
35DC Input Jack [DC IN] (p. 13)
36Mode Dial (p. 16)
37Power Lamp [POWER] (p. 16)
31Viewfi 
nder (pp. 16, 63)
31323334
35
36
3837
3940
Due to limitations in LCD production technology, 
there may be some tiny bright or dark spots on 
the Viewfi 
nder screen.
However, this is not a malfunction and does not 
affect the recorded picture.
41Shoulder Strap Holders (p. 15)
42Grip Belt (p. 14)
43Battery Holder
44Battery Eject Switch [BATTERY RELEASE]
(p. 14)
45Tripod Receptacle•   Used for mounting the Camcorder on an 
optional tripod.
4142
434445
38Quick Start Recording Button [QUICK 
START] (p. 24)
Quick Start Recording Lamp (p. 24)
39Recording Start/Stop Button (p. 22)
40Power Switch [OFF/ON] (pp. 16, 22)
  Remote Control (Optional)
•  Remote Control is not supplied, If you would like 
to order, the parts number is LSSQ0411 as a 
replacement parts. Please refer to page 69.
Using the wireless Remote Control with the 
Camcorder, most of the Camcorder functions can 
be operated from a distance.
46Date/Time Button [DATE/TIME] (p. 55)
47Indication Output Button [OSD] (p. 40)
48Display Button [DISPLAY] (p. 55)
49Reset Button [RESET] (pp. 55, 64-65)
50Recording Button [  REC] (p. 42)
51Audio Dubbing Button [A.DUB] (p. 41)
52Cursor buttons for Variable Speed Search 
Function [▲, ▼] (p. 34)
Direction Buttons for Playback Zoom 
Function [▲, ▼, ◄, ►] (p. 35)
46
47
48
49
50
51
52 
						

							12For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at: http://w w w.panasonic.com /contactinfo
Before Use
The following buttons function in the same manner as 
the corresponding buttons on the Camcorder.
61Photoshot Button [PHOTO SHOT] (p. 23)
62Title Button [TITLE] (p. 38)
63Multi-Picture/Picture-in-Picture Button
[MULTI/P-IN-P] (p. 31)
64Rewind/Review Button [  ] (p. 33)
65Pause Button [  ] (pp. 34, 41-42)
66Stop Button [  ] (pp. 35, 42)
67Recording Start/Stop Button [START/STOP]
(p. 22)
68Play Button [►] (pp. 33, 42)
69Fast Forward/Cue Button [ ] (p. 33)
70Playback Zoom Button [P.B. ZOOM] (p. 35)
71Enter Button [ENTER] (p. 17)
5354555657
58
5960
53Slow Motion/Still Advance Buttons [, ]
(: reverse, : forward) (p. 34)
54Index Search Buttons [, ]
(: reverse, : forward) (p. 35)
55Selection Button [SELECT] (p. 36)
56Store Button [STORE] (p. 36)
57Off/On Button [OFF/ON] (p. 36)
58Zoom/Volume Button [ZOOM/VOL]
(p. 36)
59Variable Speed Search Button 
[VAR.SEARCH] (p. 34)
60Menu Button [MENU] (p. 17)
6162
63646566
67
6869
70
71
The Remote Control (Optional)
• Remote Control is not supplied, If you would like 
to order, the parts number is LSSQ0411 as a 
replacement parts. Please refer to page 69.
 Inserting the Button-type BatteryBefore using the Remote Control, insert a button-type 
battery.
1  While pressing the Lock Button 1, pull out 
the Battery Holder.
2  Insert a button-type battery with the (+) 
marking facing upward.
3  Insert the Battery Holder into the Remote 
Control.
• When the button-type battery is exhausted, replace 
it with a new CR2025 battery. (A battery is normally 
expected to last about 1 year. However, it depends 
on operation frequency.)
• Make sure to match the poles correctly when 
inserting the button-type battery.
 WARNING
 CAUTION
● Replace Battery with Panasonic or Lixing 
type CR2025 only. Use of another battery 
may present a risk of fi 
re or explosion.
● Battery may explode if mistreated.
● As with any small object, this type of Battery 
can be swallowed by young children. Do not 
allow children to handle this Battery.
● Dispose of used battery promptly.
● Do not recharge, disassemble or dispose of 
in fi 
re.
1 
						

							13
Before Use
 Using the Remote Control (Optional)• Remote Control is not supplied, If you would like 
to order, the parts number is LSSQ0411 as a 
replacement parts. Please refer to page 69.
•  Distance from the Camcorder: Within 
approximately 15 feet (5 meters)
•  Angle: Within approximately 15° in the vertical and 
horizontal directions from the central axis
1  Direct the Remote Control at the Remote 
Control Sensor 29 of the Camcorder and 
press an appropriate button.
[VCR1]:
Press the [  ] Button and [  ] Button 
simultaneously. 1[VCR2]:
Press the [  ] Button and [  ] Button 
simultaneously. 2• When the battery in the Remote Control is replaced, 
the mode is automatically reset to [VCR1] Mode. • The above operating ranges are for indoor use 
Outdoors or under strong light, the Camcorder may 
not operate properly even within the above ranges.
Selecting Remote Control Modes
When 2 Camcorders are used simultaneously, they 
can be operated individually by selecting different 
Remote Control Modes.
• If the Remote Control Mode of the Camcorder and 
that of the Remote Control do not match, [CHECK 
REMOTE MODE (REMOTE)] Indication is displayed.
Setup on the Camcorder:
Set [REMOTE] on the [INITIAL] Sub-Menu to the 
desired Remote Control Mode. (p. 19)
Setup on the Remote Control:
15°
15°15° 15°
12
29
Power Supply
 Using the  AC Adaptor
1  Connect the DC Cable to the Camcorder.
2  Connect the DC Cable to the AC Adaptor.
3  Connect the AC Cable to the AC Adaptor and 
the AC Jack.
•  Before connecting or disconnecting the power 
supply, set the [OFF/ON] Switch 
40 on the 
Camcorder to [OFF] and make sure that 
[POWER] Lamp is not lit. (p. 16)
  Using the BatteryBefore use, fully charge the Battery.
• We recommend using a Panasonic Battery.
• We cannot guarantee the quality of this Camcorder 
when batteries from other companies are used.
1  Attach the Battery to the AC Adaptor and 
charge it.
•  Since the Battery will not be charged when the DC 
Cable is connected to the AC Adaptor, disconnect 
it from the AC Adaptor.
•  The [POWER] Lamp and [CHARGE] Lamp light 
up, and charging starts.
•  When the [CHARGE] Lamp goes off, charging is 
completed.
•  When the battery is completely discharged, the 
[CHARGE] Lamp blinks at fi 
rst, but the battery is 
charged normally. When the temperature of the 
battery is too high or low, the [CHARGE] Lamp 
blinks and the charging time becomes longer than 
usual. 
						

							14For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at: http://w w w.panasonic.com /contactinfo
Before Use
• For other notes concerning this item, see page 56.
Disconnecting the Power Source
Set the [OFF/ON] Switch 40 to [OFF], and while 
sliding the [BATTERY RELEASE] Switch 44, 
remove the Battery downward or DC Cable.
• When attaching or removing Battery, set the [OFF/ON] 
Switch to [OFF] and make sure the [POWER] Lamp 
is not lit.
Charging Time and Available 
Recording Time
CGR-D08RA1 h
B2 h 10 min. (1 h 45 min.)
ACharging Time
Maximum Continuous Recording TimeB
•  “1 h 30 min.” indicates 1 hour and 30 minutes.
•  Battery CGR-D08R is supplied.
•  The times shown in the table are approximate 
times. The numbers indicate the recording time 
when the Viewfi 
nder is used. The numbers in 
parentheses indicate the recording time when the 
LCD Monitor is used. In actual use, the available 
recording time may be shorter.
•  The times shown in the table are for continuous 
recording at a temperature of 68 °F (25 °C) and 
humidity of 60 %. If the Battery is charged at a 
higher or lower temperature, the charging time 
may be longer.
•  The available recording time becomes shorter 
if you use both of Viewfi 
nder and LCD Monitor 
simultaneously when rotating the LCD Monitor 
forward to record yourself or setting [EVF 
ON/AUTO] to [ON].
40
44
2  Attach the charged Battery to the Camcorder.
• When not using the Lens Cap, pull the Lens Cap 
Cord in the direction of the arrow. 1• When you are not recording, be sure to cover the 
Lens with the Lens Cap for protection. 2
Re-attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
• The Lens Cap and Lens Cap Cord come preattached 
to the Grip Belt.
1  Pass one end of the Lens Cap Cord through 
the attached eye on the Lens Cap. Then pass 
the Lens Cap through the loop made by itself 
and pull tight.
The Grip Belt
 To Use as a Grip BeltAdjust the length of the Grip Belt to the size of your 
hand.
1  Detach the end of the Grip Belt.
2  Adjust the length of the Grip Belt to the size 
of your hand.
3  Reattach the Grip Belt.
2
1 
						

							15
Before Use
Attaching the Shoulder Strap
We recommend that you attach the Shoulder Strap 
before going out to avoid dropping the Camcorder.
1  Pull the end of the Shoulder Strap through 
the Shoulder Strap Holder on the Camcorder.
2  Fold the end of the Shoulder Strap, run it 
through the Shoulder Strap Length Adjuster, 
and pull it.
•  Pull it out more than 1 inch (2 cm) 1 from the 
Shoulder Strap Length Adjuster so that it cannot 
slip off.
•  Attach the other end of the Shoulder Strap to the 
other Shoulder Strap Holder in the same way.
Inserting a Cassette
1  Slide the [OPEN/EJECT] Lever 34 toward the 
front and pull down to fully open the Cassette 
Compartment Cover.
•  To protect the tape, if the cover is not fully opened, 
the cassette cannot be ejected.
2  Insert a Cassette.
3  Close the Cassette Holder by pressing the 
[PUSH] mark 
1.4  Close the Cassette Compartment Cover by 
pressing the mark 
2.
1
34
1
2
 Accidental  Erasure PreventionOpening the accidental erasure prevention slider 1 
on the cassette (by sliding it to the [SAVE] arrow 
direction) prevents recording. To enable recording, 
close the accidental erasure prevention slider (by 
sliding it to the [REC] arrow direction).
• For other notes concerning this item, see page 56.
1
• When you remove the Lens Cap, press the knobs 
fi 
rmly.
Using a Memory Card (Optional)
A Card can be used to record still pictures.• Use a genuine SD Memory Card or MultiMediaCard 
manufactured by Panasonic only.
Before inserting or removing a Card, be sure to 
turn off the Camcorder.
• Otherwise, the Camcorder may not function properly 
or it may cause the loss of recorded data in a Card.
 Inserting a Card
1  Slide the [OPEN] Lever 3 to open the Card 
Slot Cover 5.
2  While holding the Memory Card with its cut 
corner facing right 
1, insert it into the Card 
Slot 4.
3  Close the Card Slot Cover 
5 securely.
Removing the Card
Open the Card Slot Cover and press the center of 
the Card and then pull it straight out.
• After removing the Card, close the Card Slot Cover.
• The Camcorder may be damaged if the Card is 
forced out when the Card is fully inserted.
35
1
4 
						

							16For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at: http://w w w.panasonic.com /contactinfo
Before Use
While the Camcorder is accessing the Card (reading, 
recording, playback or erasing), the Card Access 
Lamp lights up.
• While the Card Access Lamp is on, never attempt 
to open the Card Slot Cover, to pull out the Card, 
to turn off the Camcorder, or to turn the Mode Dial. 
Such actions will damage the Card, and recorded 
data, and cause the Camcorder to malfunction.
 Card Access Lamp 11
Turning on the Camcorder
Turn on the power fi 
rst and then select modes.
 How to Turn on the Power
1  Set the [OFF/ON] Switch 40 to [ON] while 
pressing the button 1.•  The [POWER] Lamp 37 lights up.
 How to Turn off the Power
2  Set the [OFF/ON] Switch 40 to [OFF] while 
pressing the button 1.
Easy to Use Mode Dial
You can choose a desired mode by rotating the Mode 
Dial.
1  Rotate the Mode Dial 36.
140
37
140
36
11
Using the  Viewfi 
nder/ LCD Monitor
 Using the Viewfi 
nderBefore using the Viewfi 
nder, adjust the fi 
eld of view so 
that the displays inside the Viewfi 
nder become clear 
and easy to read.
1  Pull the Viewfi 
nder.
2  Adjust by turning the Eyepiece Corrector 
Knob 
32.
To Use the Viewfi 
nder at the Same Time as the 
LCD Monitor
Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].
• The Viewfi 
nder does not turn off even if the LCD 
Monitor is opened.
• When you turn the Camcorder off, this setting is 
canceled.
 Using the LCD MonitorWith the LCD Monitor open, you can also record the 
picture while watching it.
1  Place your Thumb on the [OPEN▼] Knob 1 
and pull the LCD Monitor 2 out in the 
direction of the arrow.
• The Viewfi 
nder is now deactivated.
•  The LCD Monitor can be opened a maximum 
of 120°. If you open the LCD Monitor by 120°, it 
becomes convenient to operate menus or to play 
back pictures.
32
2
1
 :Tape Recording ModeUse this mode when recording pictures on a 
tape. Also, you can record still pictures on the 
card simultaneously while recording on a 
tape.
 :Tape Playback ModeUse this mode when playing back the 
recorded scene on a tape.
 :Card Recording ModeUse this mode when recording still pictures 
on a card.
 :Picture Playback ModeUse this mode when playing back the 
recorded still picture on a card.
 :PC ModeUse this mode when you want to connect the 
Camcorder to your Personal Computer. 
						

							17
Before Use
2  Adjust the LCD Monitor angle according to 
the desired recording angle.
•  The LCD Monitor can rotate a maximum of 180° 1 from the vertical position upwards and a 
maximum of 90° 2 to the downward direction. 
Forcefully rotating the LCD Monitor beyond these 
ranges will damage the Camcorder.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
• Make sure the Card Slot Cover is closed.
 Adjusting Brightness and Color LevelWhen [LCD/EVF SET] on the [LCD/EVF] Sub-Menu 
is set to [YES], the following items are displayed.
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD 
screen.
LCD Color Level [LCD COLOR LEVEL]Adjusts the color saturation of the image on the LCD 
screen.
Brightness of the Viewfi 
nder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the Viewfi 
nder.
To Adjust
Press the [  /  ] Button and select the item to be 
adjusted, and then press the [ / ] Button to 
raise or lower the number of vertical bars in the Bar 
Indication.
• More vertical bars indicates stronger brightness or 
color saturation.
1180°290°
• For other notes concerning this item, see page 63.
Using the Menu Screen
To facilitate the selection of a desired function or 
setup, this Camcorder displays various function setups 
on Menus.
• When operating the menu with the Viewfi 
nder, set 
[LCD/EVF] >> [EVF ON/AUTO] >> [ON] or rotate the 
LCD Monitor by 180°.
1  Press the [MENU] Button 18.
18
1314121516
2  Press the [  /  ] Button 12 15 to select a 
desired Sub-Menu.
•  Press the [  /  ] Button to display the highlighted 
item.
3  Press the [  ] Button 13 to display the 
selected Sub-Menu.
4  Press the [ 
 /  ] Button to select the item.
5  Press the [ 
 ] Button 13 to display the 
selected item.
6  Press the [ 
 /  ] to select the desired mode 
and press the [ENTER] 14 Button to 
determine the setting.
• While a Menu is displayed, you cannot record or play 
back. Menus can be displayed during playback but 
not during recording. The above operations can be 
done using the [MENU] Button, [▲▼◄►] Buttons 
and [ENTER] Button on the Remote Control (Optional). 
(pp. 11-12)
To Return to the Previous Screen
Press the [  ] Button 16.
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained 
even when the Camcorder is turned off. However, 
if the Battery or AC Adaptor is disconnected before 
turning off the Camcorder, the selected setup may 
not be retained.
•  The Menu corresponding to the Mode selected by 
using the Mode Dial 36 is displayed.
36
• Menu operation fl 
ow is shown in this text by >>. 
						

							18For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at: http://w w w.panasonic.com /contactinfo
Before Use
1) [CAMERA]
Camera Setup Sub-Menu
[PROG.AE]
Auto Exposure Mode (p. 27)[EIS]Image Stabilizer (p. 25)[D.ZOOM]Digital Zoom (p. 25)[SELF TIMER]Self-timer Recording (p. 24)[USB FUNCTION]USB Functions Mode (pp. 48, 51)
• If you press the [  ] Button, the menu changes 
back to the previous screen.
2) [DIGITAL]
Digital Setup Sub-Menu
[EFFECT1]
Digital Effects 1 (p. 30)
  File Selection in the Picture Playback  
 Mode
A File Selection Operation may be necessary during 
Menu Operations. In this case, carry out the following 
procedure.
2  Press the [ENTER] Button 14 to confi 
rm the 
selection of the fi 
le.
•  After the above File Selection Procedure, carry 
out the various Menu Operations. (The above 
procedure will not be repeated in the following 
instructions.)
List of Menus
The fi 
gures of the Menus are for explanation purposes 
only, and they are different from the actual Menus.
  [TAPE RECORDING MENU]
Tape Recording Menu
1  Press the [  /  /  /  ] Button and select 
a fi 
le.
• The selected fi 
le is marked by a frame.
[EFFECT2]Digital Effects 2 (p. 30)[MULTI MODE]Multi-Picture Mode (p. 31)[TITLE IN]Adding a Title (p. 38)
3) [CARD]
Card Setup Sub-Menu
[PICT QUALITY]
Picture Quality (p. 23)[CREATE TITLE]Title Creation (pp. 37-38)
4) [RECORDING]
Recording Setup Sub-Menu
[REC SPEED]
Recording Speed Mode (p. 21)[AUDIO REC]Audio Recording Mode (p. 21)[SCENE INDEX]Scene Index Mode (p. 35)[WIND CUT]Wind Noise Reduction (p. 27)[ZOOM MIC]Zoom Microphone (p. 25)[CINEMA]Cinema-like Format Recording (p. 27)
5) [DISPLAY]
Display Setup Sub-Menu
[DISPLAY]
Display Mode (p. 55)[DATE/TIME]Date and Time Indication (p. 55)[C.DISPLAY]Counter Display Mode (p. 55)[C.RESET]Counter Reset (p. 66)
• It resets the counter to zero. However, it cannot reset 
the Time Code.
6) [LCD/EVF]
LCD/EVF Setup Sub-Menu
[LCD/EVF SET]
LCD and Viewfi 
nder Adjustment (p. 17)[SELF REC]Recording Yourself (p. 24)[EVF ON/AUTO]Using the Viewfi 
nder (p. 16)
7) [INITIAL]
Initial Setup Sub-Menu
[BLANK SEARCH]
Blank Search (p. 22) 
						

							19
Before Use
[CREATE TITLE]
Title Creation (pp. 37-38)
4) [RECORDING]
Recording Setup Sub-Menu
[REC SPEED]
Recording Speed Mode (p. 21)[AUDIO REC]Audio Recording Mode (p. 21)
5) [DISPLAY]
Display Setup Sub-Menu
[DISPLAY]
Display Mode (p. 55)[DATE/TIME]Date and Time Indication (p. 55)[C.DISPLAY]Counter Display Mode (p. 55)[C.RESET]Counter Reset (p. 66)
6) [LCD/EVF]
LCD/EVF Setup Sub-Menu
[LCD/EVF SET]
LCD and Viewfi 
nder Adjustment (p. 17)[EVF ON/AUTO]Using the Viewfi 
nder (p. 16)
7) [INITIAL]
Initial Setup Sub-Menu
[BLANK SEARCH]
Blank Search (p. 22)[AV JACK]AV Jack (pp. 11, 60)[REMOTE]Remote Control Mode (p. 13)[BEEP SOUND]Beep Sound (p. 56)
[DEMO MODE]Demonstration Mode
• If no operation takes place for approximately 10 
minutes after the AC Adaptor is connected to the 
Camcorder and the [OFF/ON] Switch is turned to 
[ON] without inserting a Cassette or a Card, the 
Camcorder is automatically set to Demonstration 
Mode for introducing its functions. If any button is 
pressed or operated, the Demonstration Mode is 
canceled. The Demonstration Mode can be started 
by setting [DEMO MODE] to [ON] and by exiting the 
Menu. To terminate the Demonstration Mode, insert 
a Cassette or set the [DEMO MODE] to [OFF].
[AV JACK]AV Jack (pp. 11, 60)[REMOTE]Remote Control Mode (p. 13)[BEEP SOUND]Beep Sound (p. 56)[CLOCK SET]Date and Time Setting (p. 20)[INITIAL SET]Initial Setting Mode (p. 55)
  [TAPE PLAYBACK MENU]Tape Playback Menu
1) [PLAYBACK]
Playback Functions Sub-Menu
[SEARCH]
Index Search Mode (p. 35)[12bit AUDIO]Audio Selector (pp. 41-42)[AUDIO OUT]Audio Output Mode (p. 59)[USB FUNCTION]USB Functions Mode (pp. 48, 51)
2) [DIGITAL]
Playback Digital Setup Sub-Menu
[EFFECT ON]
Digital Effect On/Off (p. 36)[EFFECT SEL]Digital Effect Selection (p. 36)[TITLE IN]Adding a Title (p. 38)
3) [CARD]
Card Setup Sub-Menu
[PICT QUALITY]
Picture Quality (p. 23)
  [CARD RECORDING MENU]Card Recording Menu
1) [CAMERA]
Camera Setup Sub-Menu
[PROG.AE]
Auto Exposure Mode (p. 27)[SHTR EFFECT]Shutter Effect (p. 56)[SELF TIMER]Self-timer Recording (p. 24) 
						

							20For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at: http://w w w.panasonic.com /contactinfo
Before Use
  [PICTURE PLAYBACK MENU]Picture Playback Menu 2) [DIGITAL]
Digital Setup Sub-Menu
[TITLE IN]
Adding a Title (p. 38)
3) [CARD]
Card Setup Sub-Menu
[PICT QUALITY]
Picture Quality (p. 23)[CREATE TITLE]Title Creation (pp. 37-38)[BURST MODE]RapidFire Consecutive Photoshot (p. 23)
4) [DISPLAY]
Display Setup Sub-Menu
[DISPLAY]
Display Mode (p. 55)[DATE/TIME]Date and Time Indication (p. 55)
5) [LCD/EVF]
LCD/EVF Setup Sub-Menu
[LCD/EVF SET]
LCD and Viewfi 
nder Adjustment  (p.  17)[SELF REC]Recording Yourself (p. 24)[EVF ON/AUTO]Using the Viewfi 
nder (p. 16)
6) [INITIAL]
Initial Setup Sub-Menu
[AV JACK]
AV Jack (pp. 11, 60)[REMOTE]Remote Control Mode (p. 13)[BEEP SOUND]Beep Sound (p. 56)[CLOCK SET]Date and Time Setting (p. 20)[INITIAL SET]Initial Setting Mode (p. 55)
[TITLE BY SEL]Selecting and Deleting a Title (p. 39)
2) [EDITING]
Editing a File Sub-Menu
[FILE LOCK]
Setting the Lock (p. 39)[DPOF SET]Setting DPOF (p. 39)[CARD FORMAT]Formatting a Card (p. 40)
3) [DIGITAL]
Playback Digital Setup Sub-Menu
[TITLE IN]
Adding a Title (p. 38)
4) [DISPLAY]
Display Setup Sub-Menu
[DISPLAY]
Display Mode (p. 55)[DATE/TIME]Date and Time Indication (p. 55)[C.DISPLAY]Counter Display Mode (p. 55)[C.RESET]Counter Reset (p. 66)
5) [LCD/EVF]
LCD/EVF Setup Sub-Menu
[LCD/EVF SET]
LCD and Viewfi 
nder Adjustment (p. 17)[EVF ON/AUTO]Using the Viewfi 
nder (p. 16)
6) [INITIAL]
Initial Setup Sub-Menu
[AV JACK]
AV Jack (pp. 11, 60)[REMOTE]Remote Control Mode (p. 13)
  Setting Date and Time
Since the internal clock of the Camcorder has a slight 
imprecision make sure to check the time before 
recording.
1  Set [INITIAL] >> [CLOCK SET] >> [YES].
18
12131516
1) [DELETE]
Deleting a File Sub-Menu
[FILE BY SEL]
Selecting and Deleting a File (p. 39)[ALL FILES]Deleting All Files (p. 40)