Panasonic Pv Gs19 Operating Instructions Manual

							Before attempting to connect, operate or adjust this product, please 
read these instructions thoroughly.
LSQT0886 A
PV-GS19
PV-GS31
PV-GS35
Digital Video Camcorder
Operating Instructions
Models No.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
(PV-GS35 Shown) 
						

							2For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
WARNING :
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS 
EQUIPMENT TO RAIN OR MOISTURE.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.You have purchased one of the most sophisticated 
and reliable products on the market today. Used 
properly, we’re sure it will bring you and your family 
years of enjoyment. Please take time to fill in the 
information on the right.
The serial number is on the tag located on the 
underside of your Camcorder. Be sure to retain 
this manual as your convenient Camcorder 
information source.
This symbol alerts the user that important 
literature concerning the operation and 
maintenance of this unit has been included. 
Therefore, it should be read carefully in order to 
avoid any problems.
The above markings are located on the appliance bottom cover. Your 
   Camcorder is designed to record and play back in Standard Play (SP) mode and Long (LP) 
mode.
It is recommended that only cassette tapes that have been tested and inspected for use in Camcorders 
with the 
   mark be used.
Thank you for choosing Panasonic!
This symbol warns the user that uninsulated 
voltage within the unit may have sufficient 
magnitude to cause electric shock. Therefore, it 
is dangerous to make any kind of contact with 
any inside part of this unit.
Things You Should Know
Safety Precautions 
						

							3
Declaration of Conformity
Trade Name : Panasonic
Model No. : PV-GS19/PV-GS31/PV-GS35
Responsibility Party :  Panasonic Corporation of North America
Address :  One Panasonic Way Secaucus New Jersey 07094
Telephone Number : 1-800-211-PANA(7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded 
interface cables when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for compliance could void 
the user’s authority to operate this equipment.
AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT 
ALLOW CHILDREN TO HANDLE THE SD CARD.
CAUTION:
TO PREVENT FIRE OR SHOCK HAZARD AND ANNOYING 
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
CAUTION:
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. 
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
•  Since this product gets hot during use, operate it in well ventilated place; do not install this equipment in 
a confined space such as a bookcase or similar unit.
WARNING 
						

							4For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Important Safety Instructions
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.
9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two 
blades with one wider than the other. A grounding type plug has two blades and a third grounding 
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit 
into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or the table specified by the 
manufacturer, or sold with the apparatus. When a cart is used, use caution when 
moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when it will be left unused for long 
periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been 
damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped. 
						

							5
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited 
viewing.
This product incorporates copyright protection technology that is protected by method claims of certain 
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights 
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, 
and is intended for home and other limited viewing uses only unless otherwise authorized by 
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
WARNING
CAUTION
Precautions
USE & LOCATION
● TO AVOID SHOCK HAZARD ... Your 
Camcorder and power supply should not be 
exposed to rain or moisture. Do not connect the 
power supply or operate your Camcorder if it 
gets wet. Your Camcorder has been designed for 
outdoor use, however it is not designed to sustain 
direct exposure to water, rain, sleet, snow, sand, 
dust, or a direct splashing from a pool or even 
a cup of coffee. This action could permanently 
damage the internal parts of your Camcorder. 
Do not attempt to disassemble this unit. There 
are no user serviceable parts inside. Unplug 
your Camcorder from the power supply before 
cleaning.
● DO NOT AIM YOUR CAMCORDER AT 
THE SUN OR OTHER BRIGHT OBJECTS
● DO NOT LEAVE THE CAMCORDER WITH 
THE EVF AIMED DIRECTLY AT THE SUN 
AS THIS MAY CAUSE DAMAGE TO THE 
INTERNAL PARTS OF THE EVF
● DO NOT EXPOSE YOUR CAMCORDER 
TO EXTENDED HIGH TEMPERATURE 
...
 Such as, in direct sunlight, inside a closed 
car, next to a heater, etc... This action could 
permanently damage the internal parts of your 
Camcorder.● 
AVOID SUDDEN CHANGES IN 
TEMPERATURE ...
 If the unit is suddenly 
moved from a cold place to a warm place, 
moisture may form on the tape and inside the 
unit.
● 
DO NOT LEAVE YOUR CAMCORDER 
OR THE POWER SUPPLY TURNED ON 
WHEN NOT IN USE.
● STORAGE OF YOUR CAMCORDER ... 
Store and handle your Camcorder in a manner 
that will not subject it to unnecessary movement 
(avoid shaking and striking). Your Camcorder 
contains a sensitive pick-up device which could 
be damaged by improper handling or storage.
CARE
● TO CLEAN YOUR CAMCORDER ... Do not 
use strong or abrasive detergents when cleaning 
your Camcorder body.
● 
TO PROTECT THE LENS ... Do not touch 
the surface of the lens with your hand. Use a 
commercial Camcorder lens solution and lens 
paper when cleaning the lens. Improper cleaning 
can scratch the lens coating.
● 
TO PROTECT THE FINISH OF YOUR 
CAMCORDER ...
 Before handling your 
Camcorder, make sure your hands and face are 
free from any chemical products, such as suntan 
lotion, as it may damage the finish.
A lithium ion/polymer battery that is recyclable powers the product you 
have purchased. Please call 1-800-8-BATTERY for information on how 
to recycle this battery.
U.S.A. CONSUMERS: ATTENTION: 
						

							6For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement 
(“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee 
does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita 
Electric Industrial Co., Ltd. (“Matsushita”), its distributors or dealers from which you made the purchase.
Article 1  License
Licensee is granted the right to use the software, including the information recorded or described on the 
CD-ROM, instruction manuals, and any other media provided to Licensee (collectively “Software”), but all 
applicable rights to patents, copyrights, trademarks and trade secrets in the Software are not transferred 
to Licensee.
Article 2  Use by a Third Party
Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to use, 
copy or modify the Software, except as expressly provided for in this Agreement.
Article 3  Restrictions on Copying the Software
Licensee may make a single copy of the Software in whole or in part solely for back-up purpose.
Article 4  Computer
Licensee may only use the Software on a single computer at a single location.
Article 5  Reverse Engineering, Decompiling or Disassembly
Licensee may not reverse engineer, decompile, or disassemble the Software, except to the extent either 
of them is permitted under law or regulation of the country where Licensee resides. Matsushita, or its 
distributors or dealers will not be responsible for any defects in the Software or damage to Licensee 
caused by Licensee’s reverse engineering, decompiling, or disassembly of the Software.
Article 6  Limitation of Liability
The Software is provided “AS-IS” without warranty of any kind, either expressed or implied, including, 
but not limited to, warranties of non-infringement, merchantability and/or fitness for a particular purpose. 
Further, Matsushita does not warrant that the operation of the Software will be uninterrupted or error free. 
Matsushita or any of its distributors or dealers will not be liable for any damage suffered by Licensee 
arising from or in connection with Licensee’s use of the Software.
Article 7  Export Control
Licensee agrees not to export or re-export to any country the Software in any form without the appropriate 
export licenses under regulations of the country where Licensee resides, if necessary.
Article 8  Termination of License
The right granted to Licensee hereunder will be automatically terminated if Licensee violates any of the 
terms and conditions of this Agreement. Upon such automatic termination, Licensee must destroy the 
Software and related documentation together with all the copies thereof at Licensee’s own expense. Before opening the CD-ROM package (PV-GS35 Only), please read the following.
End User License Agreement (for USB Driver, Video Stream Driver and 
MotionDV STUDIO) 
						

							7
This operating instruction book is designed for use with models PV-GS19, PV-GS31 and PV-GS35. The 
PV-GS35 is the model used for illustrative purposes. Features may vary, so please read carefully.
Differences between models
Model Number PV-GS19 PV-GS31 PV-GS35
Battery Pack
(Supplied)CGR-DU06
(640 mAh)CGR-DU06
(640 mAh)CGA-DU12
(1 150 mAh)
CD-ROM – – Supplied (LSFT0618)
Remote Control – – Supplied (LSSQ0992)
USB Cable – – Supplied (K1HA05CD0010)
Lensf2.1–50.4 mm, F1.8–3.6
(35 mm equivalent: 
39.5–948 mm),
24× zoom lensf1.9–49.4 mm, F1.8–3.3
(35 mm equivalent: 
35.7–928 mm),
26× zoom lensf1.9–57 mm, F1.8–3.9
(35 mm equivalent: 
35.7–1 072 mm),
30× zoom lens
Digital Zoom 
Magnification50×, 800× 50×, 1 000× 50×, 1 000×
Viewfinder Electronic ViewfinderLiquid Crystal Color Electronic 
ViewfinderLiquid Crystal Color Electronic 
Viewfinder
LED Video Light No Yes Yes
S-Video Output 
JackNo No Yes
Microphone Jack No No Yes
Remote Control 
SensorNo No Yes
„ How to Turn off the Demo Mode
To terminate the demonstration mode, insert a cassette or set the [  DEMO MODE] to 
[OFF] as follows.
1 Set [  SETUP] >> [  DEMO MODE] >> [OFF]. 
						

							8For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Contents
About Recording .............................................25
Recording on a Tape ......................................25
Recording a Still Picture on a Card 
  (Photoshot) ...................................................26
Recording Yourself .........................................27
Recording with the Built-in LED Video Light 
  (For PV-GS31/PV-GS35) ..............................27
Quick Start ......................................................28
Self-timer Recording .......................................28
Zoom In/Out Functions ...................................28
Digital Zoom Function .....................................29
Image Stabilizer Function ...............................29
Fade In/Out Functions ....................................29
Backlight Compensation Function ..................30
MagicPix Function ...........................................30
Soft-Skin Mode ...............................................31
Wind Noise Reduction Function ......................31
Cinema Function .............................................31
Recording in Special Situations 
  (Scene Mode) ...............................................31
Recording in Natural Colors 
  (White Balance) ............................................32
Adjusting White Balance Manually ..................32
Manual Shutter Speed Adjustment .................33
Manual Iris Adjustment (F Number) ................34
Manual Focus Adjustment ..............................34
Before Using
Things You Should Know ..................................2
Safety Precautions ............................................2
Precautions .......................................................5
End User License Agreement ...........................6
Differences between models .............................7
Quick Guide ....................................................10
Standard Accessories .....................................12
Parts Identification and Handling ....................12
The Remote Control (PV-GS35 Only) .............14
Power Supply ..................................................15
Charging Time and Available Recording Time
 ........................................................................16
How to remove the Sensor tag .......................16
To Use as a Grip Belt ......................................16
Re-attaching the Lens Cap .............................16
Attaching the Shoulder Strap ..........................17
Inserting a Cassette ........................................17
Using a Memory Card (Optional) ....................18
Turning on the Camcorder ..............................18
Easy to Use Mode Dial ...................................19
How to Use the Joystick Control .....................19
Using the Viewfinder/LCD Monitor ..................20
Using the Menu Screen ..................................21
Selecting Language ........................................22
List of Menus ...................................................22
Setting Date and Time ....................................24
Internal Lithium Battery Recharge ..................24
LP Mode ..........................................................24
Audio Recording Mode ...................................24
Recording Mode 
						

							9
Playing Back a Tape .......................................35
Finding a Scene You Want to Play Back ........35
Slow Motion Playback (PV-GS35 Only) ..........36
Still Playback/Still Advance Playback .............36
Playing Back a Memory Card .........................37
Slide Show ......................................................37
Deleting the Files Recorded on a Card ...........38
Writing Printing Data on a Card 
  (DPOF Setting) .............................................38
Protecting the Files on a Card 
  (Lock Setting) ................................................39
Formatting a Card ...........................................39
Playing Back on Your TV ................................40
Recording from a Tape onto a Card ...............41
Audio Dubbing (PV-GS35 Only) .....................41
Copying onto a DVD Recorder or a VCR 
  (Dubbing) ......................................................42
Using the DV Cable for Recording 
  (Digital Dubbing) ...........................................42
PC Connection With DV Interface Cable ........43Using Camcorder with a PC ............................44
Using the USB Driver ......................................44
To disconnect USB cable safely .....................46
Using as a Web Camera .................................47
Using MotionDV STUDIO (PV-GS35 Only) ....52
If you no longer need software or driver 
  (Uninstall) ......................................................55
Notes ...............................................................55
Indications .......................................................57
Initializing the Modes ......................................58
Warning/Alarm Indications ..............................58
Notes and Hints ..............................................59
Cautions for Use .............................................63
Before Requesting Service 
  (Problems and Solutions) ..............................67
Using the RESET button .................................70
Explanation of Terms ......................................70
Specifications ..................................................71
Camcorder Accessory System ........................72
Camcorder Accessory Order Form .................73
Request for Service Notice .............................74
Limited Warranty .............................................75
Customer Services Directory ..........................76
Spanish Quick Use Guide/
  Guía Para Uso Rápido ..................................77
Guía rápida .....................................................78
Index ................................................ Back  Cover
Playback Mode
Editing Mode
With a PC
Others 
						

							10For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Before Using
•  Before use, fully charge the Battery.
•  Since the Battery will not be charged when 
the DC Cable is connected to the AC Adaptor, 
disconnect it from the AC Adaptor.
•  The [CHARGE] Lamp lights up, and charging 
starts.
•  When the [CHARGE] Lamp goes off, charging is 
completed.
1  Attach the Battery to the AC Adaptor and 
charge it.
2  Attach the charged Battery to the 
Camcorder.
1  Slide the [OPEN/EJECT] Lever 1 toward 
the front and pull down to fully open the 
Cassette Compartment Cover.
•  To protect the tape, if the cover is not fully 
opened, the cassette holder cannot be ejected.
2  After the Cassette Holder is opened, insert 
a Cassette.
3  Close the Cassette Holder by pressing the 
[PUSH] mark 2.
4  Only after the Cassette Holder is completely 
housed, close the Cassette Compartment 
Cover by pressing the mark 
3.
2
1
Inserting a Card
2  Slide the [◄OPEN] Lever 3 to open the 
Card Slot Cover 4.
3  While holding the Memory Card with its cut 
corner facing right 5 insert it into the Card 
Slot 6.
4  Close the Card Slot Cover 4 securely.
Recording on a Tape
1  Set the [OFF/ON] Switch 1 to [ON].•  The [POWER] Lamp 2 lights up.
1
2
3
1  Place your Thumb on the [OPEN▼] 1 
Knob and pull the LCD Monitor 2 out in the 
direction of the arrow.
1
2
5
3
46
Quick Guide
Inserting a Cassette
Before using the Viewfinder, adjust the field of view so 
that the displays inside the Viewfinder become clear 
and easy to read.
1  Pull the Viewfi nder.
2  Adjust by turning the Eyepiece Corrector 
Knob 1.
Using the Viewfinder
1
Using the Battery