Panasonic Pv Gs150 Operating Instructions Manual

							Menu
61LSQT0861
Menu
Menu list
Menu figures and illustrations are provided for 
easy-to-understand explanations, and so they are 
different from the actual menu indications.
ª
[TAPE RECORDING MENU]
1) [BASIC]
[SCENE MODE] -38-[REC SPEED] -27-[BLANK SEARCH] -29-[WIND CUT] -34-[CLOCK SET] -23-
2) [ADVANCE]
[PICT. QUALITY] -30-[FLASH] -35-[RED EYE] -35-[FLASH LEVEL] -35-[EIS] -37-[H.SHOE MIC] -63-[WIDE] -36-[CINEMA] -36-[USB FUNCTION] -53-[D.ZOOM] -31-[ZOOM MIC] -31-[DATE/TIME] -63-[INITIAL SET] -64-
3) [SETUP]
[FADE COLOR] -34-[AUDIO REC] -63-[REC LAMP] -63-[DISPLAY] -63-[REMOTE] -25-[BEEP SOUND] -63-[LCD AI] -24-[LCD SET] -23-[EVF SET] -23-[DEMO MODE] -64-[AV JACK] -63-[POWER SAVE] -28-
4) [LANGUAGE] -21-
ª[TAPE PLAYBACK MENU] 
1) [BASIC]
[DATE/TIME] -63-[AV JACK] -63-[USB FUNCTION] -53-
2) [ADVANCE]
[BLANK SEARCH] -29-[REC SPEED] -27-[REC STDBY] -48-[REC DATA] -63-[PICT. QUALITY] -30-[REPEAT PLAY] -42-
3) [SETUP]
[12bit AUDIO] -49-[AUDIO OUT] -63-[DISPLAY] -63-[REMOTE] -25-[LCD AI] -24-[LCD SET] -23-[EVF SET] -23-[POWER SAVE] -28-
4) [LANGUAGE] -21-
LSQT0861Eng.book  61 ページ  ２００４年１２月２２日　水曜日　午後２時３４分 
						

							Menu
62LSQT0861
ª[CARD RECORDING MENU]
1) [BASIC]
[SCENE MODE] -38-[PICT. QUALITY] -30-[PICTURE SIZE] -30-[SELF TIMER] -36-[CLOCK SET] -23-
2) [ADVANCE]
[BURST MODE] -37-[FLASH] -35-[RED EYE] -35-[FLASH LEVEL] -35-[SHTR EFFECT] -30-[DATE/TIME] -63-[INITIAL SET] -64-
3) [SETUP]
[REC LAMP] -63-[DISPLAY] -63-[REMOTE] -25-[BEEP SOUND] -63-[LCD AI] -24-[LCD SET] -23-[EVF SET] -23-[POWER SAVE] -28-
4) [LANGUAGE] -21-
ª[PICTURE PLAYBACK MENU]
1) [BASIC]
[DATE/TIME] -63-[PROTECT] -46-
2) [ADVANCE]
[DPOF SET] -46-[CARD FORMAT] -46-
3) [SETUP]
[DISPLAY] -63-[REMOTE] -25-[LCD SET] -23-[EVF SET] -23-[LCD AI] -24-[POWER SAVE] -28-
4) [LANGUAGE] -21-
LSQT0861Eng.book  62 ページ  ２００４年１２月２２日　水曜日　午後２時３４分 
						

							Menu
63LSQT0861
Menus related to taking pictures
ª[H.SHOE MIC]Set to [LOWCUT] and this reduces low sound 
noise and wind noise hitting the stereo zoom 
microphone (VW-VMH3; optional) mounted on 
the smart accessory shoe.
ª
[DATE/TIME]This switches between date and time indications.
≥The Camcorder automatically records the date 
and time the picture was taken on the tape.
≥You can also show or change the date/time 
indication by repeatedly pressing the [DATE/
TIME] button on the remote control.
ª
[AUDIO REC]Switches the audio (PCM audio) recording 
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. 
(The original audio signals can be kept 
after the other audio signals are dubbed.) 
[16bit]: Records audio in “16 bit 48 kHz 2 tracks”. 
Audio can be recorded in higher quality. 
(If audio signals are dubbed, then the 
original audio signals will be erased.) 
ª
[REC LAMP]Set to [ON] and this turns the recording lamp on 
during recording, which indicates that recording is 
underway. Set to [OFF] and this does not turn on 
the lamp even when recording is underway.
ª
[DISPLAY]Set to [ON] and the display mode can be switched 
to all functions. Set to [OFF] and it can be 
switched to minimum display.
ª
[BEEP SOUND]Set to [ON] and confirmation/alarm beeps are 
issued as follows.
1 Beep
≥When you start recording
≥When you turn on the power
2 Beeps
≥When you pause recording
2 Beeps for 4 times
≥When a cassette with its erasure prevention tab 
set to [SAVE] is inserted, condensation occurs, 
and at other times. Check the sentence 
displayed on the screen.
Menus related to playback
ª[AV JACK]This switches among the output settings of the 
AV/headphone terminal.
[OUT/Ë]: Automatically switches between AV 
and headphone output.
[OUT]: Use this setting when image or sound 
is not output normally to the TV in 
[OUT/Ë].
≥When using the headphone, set to [SETUP] or 
[BASIC] >> [AV JACK] >> [OUT/Ë]. If set to 
[OUT], you may hear noises on the right.
ª
[REC DATA]Set to [ON] and the settings (shutter speed, iris/
gain values, and white balance settings (-39-), 
etc.) used during the recordings are displayed 
during playback.
≥When the [AUTO/MANUAL/FOCUS] switch is 
set to [AUTO], the indication [AUTO] will 
appear.
≥When there is no data, [---] appears on the 
display. 
≥If the Camcorder data of the Camcorder are 
played back on other equipment, the settings 
information is sometimes not displayed 
normally.
ª
[AUDIO OUT]This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub 
sound) 
[L]: Left channel sound (main sound) 
[R]: Right channel sound (sub sound) 
LSQT0861Eng.book  63 ページ  ２００４年１２月２２日　水曜日　午後２時３４分 
						

							Menu
64LSQT0861
Other menus
ª[INITIAL SET]When there is a menu that cannot be selected 
depending on a combination of functions, set to 
[YES] for changing the menu settings back to the 
initial shipping condition.
(Language setting cannot be back to the initial 
shipping condition.)
ª
[DEMO MODE]If you set to [DEMO MODE] >> [ON] without 
inserting a cassette and a card, the Camcorder is 
automatically set to the demonstration mode for 
introducing its functions. If any button is pressed 
or operated, the demonstration mode is canceled. 
If no operations take place for approx. 
10 minutes, the demonstration mode 
automatically starts. To terminate the 
demonstration mode, insert a cassette or a card, 
or set to [DEMO MODE] >> [OFF]. For normal 
use, set this function to [OFF].
LSQT0861Eng.book  64 ページ  ２００４年１２月２２日　水曜日　午後２時３４分 
						

							Others
65LSQT0861
Others
Indications
Various functions and the Camcorder status are 
shown on the screen.
Basic indications
r: Remaining battery power
0h00m00s00f: Time code
3:30:45PM: Date/Time indication
Recording indications
R 0:45: Remaining tape time
≥Remaining tape time is indicated in minutes. 
(When it reaches less than 3 minutes, the 
indication starts flashing.) 
SP: Standard Play mode
(Recording speed mode) 
-27-LP: Long Play mode 
(Recording speed mode) -27-¥: Recording -28-; (Green): Recording pause -28-; (Green flash):
Standby mode
; (Red): Fade out
: Recording check 
-29-: Cinema mode -36-: wide mode -36-: Digital zoom -31-: Automatic mode -27-: Manual mode -38-MF: Manual focus -40-5k: Zoom magnification indication-31-: Back light mode -32-: Image stabilizer -37-1/500: Shutter speed -40-F2.4: F number -40-6dB: Gain value -40-: Soft skin mode -33-: Tele macro -33-: Fade (White) -34-: Fade (Black) -34-: MagicPix function -33-: 0 Lux MagicPix function -33-ß/ßA: Video flash turned on -35-: VIdeo flash turned off -35-ßi/ßAi:  Video flash (setting to [i]) -35-ßj/ßAj: Video flash (setting to [j]) -35-£: Red eye reduction -35-: Zoom microphone -31-: Wind noise reduction -34-: When the microphone of the 
Magic Wire Remote Control with 
Narration Mic is used 
-26-: External microphone supporting 
the smart accessory shoe -13-
: External microphone supporting 
the smart accessory shoe (LOW 
CUT) 
-13-5: Sports mode (Scene mode) -38-: Portrait mode (Scene mode) -38-: Low light mode (Scene mode)-38-: Spotlight mode (Scene mode) -38-: Surf & snow mode (Scene mode) -38-: Auto white balance -39-: Indoor mode (recording under 
incandescent lamp) -39-: Outdoor mode -39-: White balance adjustment mode -39-: WEB CAMERA mode (recording) -50-Playback indications
¥: Recording underway
1: Playback 
-42-;: Pause -42-5: Fast-forward/Cue playback -42-6: Rewind/Review playback -42-D/E: Slow motion playback -42-;1/2;: Frame-by-frame playback -42-2k5: Variable-speed search -43-: Repeat playback -42-: WEB CAMERA mode (playback) -50-A.DUB¥: Audio dubbing -49-A.DUB;: Audio dubbing pause -49-: Blank search -29-12bit, 16bit: Audio recording mode -63-: Volume adjustment -42-Card
æ: Progressive photoshot mode -30-± (White): Shutter chance mark -29-¥ (Green): Shutter chance mark -29-: RapidFire Consecutive Photoshot 
recording -37-: Self-Timer recording -36- (White): Photoshot mode
 (Green): While the card is being read
: While photoshot recording is 
activated
 (Red): Using the card that cannot be 
recognized
 ( ): Photoshot picture quality 
-30-0: Remaining number of photoshot 
pictures (When the remaining 
number of photoshot pictures 
reaches 0, the red indication 
flashes.) 
: Slide show playback 
-44-PictBridge: PictBridge mode -50-
CINEMAWIDE
AUTO
MNL
EIS
0Lux
ZOOM
LOWCUT
AWB
LSQT0861Eng.book  65 ページ  ２００４年１２月２２日　水曜日　午後２時３４分 
						

							Others
66LSQT0861
100-0001: Folder/File display
No.00: File number
1: Number of DPOF Setting 
-46-: Lock setting -46-: [640k480] Image size
: [1280k960] Image size
: [1760k1320] Image size
≥For images not recorded with this Camcorder, 
the size display is determined as follows 
according to the number of horizontal pixels.
: 2048 or more
: 1600 or more, less than 2048
: 1280 or more, less than 1600
: 1024 or more, less than 1280
: 800 or more, less than 1024
: 640 or more, less than 800
(The size is not displayed at 
under 640 pixels.) 
Warning/alarm indications
If any one of the following indications lights up or 
flashes, please check the Camcorder.
Confirmatory indications
Y: A cassette with the accidental erasure 
prevention slider placed in the [SAVE] 
position is inserted.
No cassette is inserted.
[--]/0:
The built-in battery is low. 
-23-°: The warning/alarm indication appears when 
you record yourself. Turn the LCD monitor 
towards the viewfinder and check the 
warning/alarm indication.
: No card is inserted.
REMOTE : 
An incorrect remote control mode has been 
selected. 
-25-2END: 
The tape came to the end during recording.
::  The video heads are dirty. 
-72-
Textual indications
3DEW DETECT/3EJECT TAPE:
Condensation has occurred. Take out the 
cassette and wait for a while. It takes some 
time until the cassette holder opens, but this 
is not a malfunction. 
-72-LOW BATTERY: 
The battery is low. Recharge it. -16-NO TAPE : 
No tape is inserted. -17-TAPE END: 
The tape came to the end during recording.
CHECK REC TAB: 
You are attempting to record pictures on a 
tape with the accidental erasure prevention 
slider placed in the [SAVE] position. 
You are attempting audio dubbing or digital 
dubbing on a tape with the accidental 
erasure prevention slider placed in the 
[SAVE] position. 
CHECK REMOTE MODE:
An incorrect remote control mode has been 
selected. This is only displayed at the first 
operation of the remote control after 
powering-on. 
-25-WRONG TAPE FORMAT: 
You are attempting to play back a tape 
section that has been recorded with a 
different TV system. This cassette is 
incompatible.
UNPLAYABLE CARD: 
You are attempting to play back data not 
compatible with this Camcorder.
64012801760
QXGAUXGASXGAXGASVGA640
LSQT0861Eng.book  66 ページ  ２００４年１２月２２日　水曜日　午後２時３４分 
						

							Others
67LSQT0861
UNABLE TO A.DUB (LP RECORDED): 
Audio dubbing cannot be performed 
because the original recording was in LP 
mode.
UNABLE TO A.DUB:
You are attempting to perform audio 
dubbing on a non-recorded tape.
COPY PROTECTED: 
Images cannot be recorded correctly 
because the medium is protected by a copy 
guard.
CARD ERROR: 
This card is not compatible with this 
Camcorder.
You are attempting to format a failed card.
It displays, when you attempt to insert an 
incompatible card to Card Slot.
NO CARD: 
No card is inserted.
CARD FULL: 
Card does not have sufficient memory 
remaining. 
Select Picture Playback Mode and delete 
unnecessary files.
NO DATA: 
There are no recorded files on the card.
CHANGE ASPECT TO 4:3:
You are attempting to record pictures with 
an aspect ratio of 16:9 by pressing the 
[PHOTO SHOT] button.
FILE LOCKED: 
You are attempting to erase protected files.
CARD LOCKED: 
The write protection switch on the SD 
Memory Card is set to [LOCK].
NEED HEAD CLEANING: 
The video heads are dirty. 
-72-PUSH THE RESET SWITCH: 
An irregularity in the equipment has been 
detected. Press the [RESET] button (
-13-). 
This may solve the problem.
CHANGE MODE TO USE USB: 
The USB cable is connected to the 
Camcorder in Card Recording Mode.
DISCONNECT USB CABLE: 
You are attempting to turn the mode dial in 
PC mode with the USB cable connected to 
the Camcorder. You are attempting to 
record pictures on a tape/card with the USB 
cable connected to the Camcorder.
NO INK IN PRINTER: 
There is no ink. Check the connected 
printer.
NO PAPER IN PRINTER: 
There is no paper. Check the connected 
printer.PRINTER ERROR: 
Check the connected printer.
PC DOES NOT SUPPORT USB2.0: 
The Camcorder is connected to a personal 
computer that does not support USB 2.0.
CAN NOT USE USB: 
You are connecting the USB cable with the 
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the 
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM] 
setting during MotinDV Mode.
REVERSE THE LCD MONITOR:
At the time of 0 Lux MagicPix mode, when 
LCD monitor is not reversed, it displays.
When the LCD monitor is rotated by 180° 
towards the lens, the brightness of the LCD 
monitor cannot be adjusted.
LSQT0861Eng.book  67 ページ  ２００４年１２月２２日　水曜日　午後２時３４分 
						

							Others
68LSQT0861
Functions cannot be used 
simultaneously
Some functions in the Camcorder are disabled or 
cannot be selected due to its specifications. The 
table below shows examples of functions 
restricted by conditions.
FunctionsConditions which disable 
the functions
≥Progressive≥When recording onto a 
tape and a card 
simultaneously
≥When digital zoom 
(10k or higher) is used
≥When the shutter speed is 
1/750 or faster in Tape 
Recording Mode
≥When the gain value is 
increased in Tape 
Recording Mode
≥When brightness is 
insufficient with the flash 
[ ] in Tape Recording 
Mode
≥When the MagicPix 
function is used
≥When the portrait mode of 
the scene mode is used in 
Tape Recording Mode
≥When the wide mode is 
used
≥Digital zoom
≥Wide mode
≥Fade≥When the Card Recording 
mode is used
≥Image stabilizer≥When the Card Recording 
mode is used
≥When the MagicPix 
function is used
≥Backlight 
compensation≥When the iris/gain is set
≥When the MagicPix 
function is used
≥Soft skin
≥Tele-macro
≥Recording 
check≥While recording to a tape
≥MagicPix≥While recording to a tape
≥When the Card Recording 
mode is used
≥RapidFire 
Consecutive 
Photoshot≥When [PICTURE SIZE] is 
set to other than [640]
≥Flash≥While recording to a tape
≥During demo mode
≥When RapidFire 
Consecutive Photoshot is 
used
≥When the MagicPix 
function is used
≥Zoom 
microphone
≥Wind noise 
reduction≥When the microphone of 
the Magic Wire Remote 
Control with Narration Mic 
or an external microphone 
is used
≥Scene mode≥When setting the [AUTO/
MANUAL/FOCUS] switch 
to [AUTO]
≥When the MagicPix 
function is used
≥Change of 
white balance≥When digital zoom (10k 
or higher) is used
≥When the MagicPix 
function is used
≥When a menu is 
displayed
≥Adjusting the 
shutter speed, 
iris/gain≥When the MagicPix 
function is used
≥When the scene mode is 
used
≥Variable-speed 
search≥During repeat playback
≥Deleting files≥When the write protect 
switch on the card is set 
to [LOCK]
≥When the file is protected
≥Formatting≥When the write protect 
switch on the card is set 
to [LOCK]
≥Audio dubbing≥The section of a tape 
recorded in LP mode
≥The blank section of a 
tape
≥Sounds sent through the 
DV terminal
LSQT0861Eng.book  68 ページ  ２００４年１２月２２日　水曜日　午後２時３４分 
						

							Others
69LSQT0861
Before requesting repair (Problems 
and solutions)
Power/Body
1: The Camcorder power cannot be turned on.
 Is the battery fully charged? Use a fully 
charged battery.
 The battery protection circuit may have 
operated. Attach the battery to the AC adaptor 
for 5 to 10 seconds. If the Camcorder still 
cannot be used, the battery is faulty.
2: The Camcorder power is turned off 
automatically.
 If you set [POWER SAVE] to [5 MINUTES] and 
do not operate the Camcorder for about 
5 continuous minutes, the power is 
automatically turned off for tape protection and 
power conservation. To resume recording, turn 
the [OFF/ON] switch to [OFF]. Then turn it to 
[ON] again. (
-28-) 
3: The Camcorder power does not stay on 
long enough.
 Is the battery low? If the remaining battery 
power indication is flashing or the message 
“LOW BATTERY” is displayed, the battery has 
run down. Charge the battery or attach a fully 
charged battery. (
-16-) 
 Has condensation occurred? When you carry 
the Camcorder from a cold place into a warm 
place, condensation may occur inside it. If so, 
the power is turned off automatically, disabling 
all operations except for taking cassettes out. 
Wait until the condensation indication 
disappears. (
-72-) 
4: Battery runs down quickly.
 Is the battery fully charged? Charge it with the 
AC adaptor. (
-16-) 
 Are you using the battery in an extremely cold 
place? The battery is affected by ambient 
temperature. In cold places, the operating time 
of the battery becomes shorter.
 Has the battery worn out? The battery has a 
limited life. If the operating time is still too short 
even after the battery is fully charged, 
depending on the usage, the battery has worn 
out and can no longer be used. 
5: The Camcorder cannot be operated though 
powered up.
The Camcorder does not operate normally.
 Remove the cassette and then press the 
[RESET] button. (
-71-) If normal conditions are 
not restored yet, turn off the power. Then, 
about 1 minute later, turn on the power again. 
(Conducting the above operation when the 
access lamp is on may destroy the data on the 
card.) 6: The cassette cannot be removed.
 Does the power lamp comes on when opening 
the cassette cover? (
-19-) Make sure that the 
battery and the AC adaptor are properly 
connected. (
-16-) 
 Is the battery in use discharged? Charge the 
battery and remove the cassette.
 Close the cassette cover completely, and fully 
open it again. (
-17-) 
7: No operation other than cassette removal 
can be performed.
 Has condensation occurred? Wait until the 
condensation indication disappears. (
-72-) 
8: The remote control does not function.
 Has the button-type battery of the remote 
control run out? Replace it with a new button-
type battery. (
-25-) 
 Is the setting on the remote control correct? If 
the setting on the remote control is not in 
agreement with the [REMOTE] setting on the 
Camcorder, the remote control does not 
operate. (
-25-) 
Recording
1: Recording does not start although power is 
supplied to the Camcorder and the cassette 
is correctly inserted.
 Is the accidental erasure prevention slider on 
the cassette open? If it is open (set to [SAVE]), 
recording cannot be performed. (
-18-) 
 Is the tape wound to the end? Insert a new 
cassette.
 Is the recording mode set? When in the 
playback mode, recording cannot be 
performed. (
-27-) 
 Has condensation occurred? No operation 
other than cassette removal can be performed 
when condensation occurs. Wait until the 
condensation indication disappears. (
-72-) 
 Is the cassette cover open? If the cover is 
open, the Camcorder may not operate 
normally. Close the cassette cover. (
-17-) 
2: The screen has changed suddenly.
 Has the demonstration started? In the Tape 
Recording mode, if you set [DEMO MODE] >> 
[ON] without inserting a cassette and a card, 
the demonstration starts. For normal use, set 
this function to [OFF]. (
-64-) 
3: A cassette cannot be inserted.
 Has condensation occurred? Wait until the 
condensation indication disappears.
4: Auto focus function does not work.
 Is manual focus mode selected? If auto focus 
mode is selected, focus is automatically 
adjusted.
LSQT0861Eng.book  69 ページ  ２００４年１２月２２日　水曜日　午後２時３４分 
						

							Others
70LSQT0861
 There are some recording subjects and 
surroundings for which the auto focus does not 
operate correctly. (
-76-) If so, use the manual 
focus mode to adjust the focus. (-40-)
 Is the MagicPix function set? When the 
MagicPix function is working, focusing shifts 
into the manual mode.
Indications
1: A sentence is displayed in red or yellow in 
the screen center.
 Read the contents and respond to them. 
(
-66-)
2: The time code becomes inaccurate.
0The time code indication counter may not be 
constant in the reversed slow-motion playback, 
but this is not a malfunction.
3: The remaining tape time indication 
disappears.
 The remaining tape time indication may 
disappear temporarily during frame-by-frame 
playback or other operation. If you continue 
ordinary recording or playback, the indication is 
restored.
4: The remaining tape time Indication does not 
match the actual remaining tape time.
 If scenes of less than 15 seconds are 
continuously recorded, the remaining tape time 
cannot be correctly displayed.
 In some cases, the remaining tape time 
indication may show remaining tape time that is 
2 to 3 minutes shorter than the actual 
remaining tape time.
5: A function indication such as mode 
indication, remaining tape time indication, 
or time cord indication is not shown.
 If you set [SETUP] >> [DISPLAY] >> [OFF], 
indications other than the tape running 
condition, warning, and date indications 
disappear.
Playback (Sound) 
1: Sound is not played back from the built-in 
speaker of the Camcorder or the 
headphones.
0Is the volume too low? During playback, push 
the [s/VOLr] lever to display the volume 
indication and adjust it. (
-42-) 
2: Different sounds are reproduced at the 
same time.
 Have you set [SETUP] >> [12bit AUDIO] >> 
[MIX]? If you set [AUDIO REC] >> [12bit] and 
dub audio to a recorded tape, you can hear the 
sound on recording and the sound dubbed at a 
later time. To hear the sounds separately, set 
to [ST1] or [ST2]. (
-49-)  Have you set [SETUP] >> [AUDIO OUT] >> 
[STEREO] and reproduced a picture containing 
the main sound and sub sound? Set to [L] to 
hear main sound, and set to [R] to hear the sub 
sound. (
-63-) 
3: Audio dubbing cannot be performed.
 Is the accidental erasure prevention slider on 
the cassette open? If it is open (set to [SAVE]), 
audio dubbing cannot be performed. (
-18-) 
 Are you attempting to edit a tape portion that 
was recorded in LP mode? LP mode does not 
allow audio dubbing. (
-27-) 
4: The original sound was erased when audio 
dubbing was performed.
 If you perform audio dubbing on a recording 
made in [16bit] mode, the original sound will be 
erased. If you wish to preserve the original 
sound, be sure to select [12bit] mode when 
recording. 
5: Sounds cannot be played back.
 Although a cassette with no audio dubbing is 
being played, have you set [SETUP] >> 
[12bit AUDIO] >> [ST2]? To play back a 
cassette with no audio dubbing, set 
[12bit AUDIO] >> [ST1]. (
-49-) 
 Is the variable speed search function working? 
Press the [VAR. SEARCH] button on the 
remote control to cancel the variable speed 
search function. (
-43-) 
6: Noise is heard from the right headphone.
 Have you set [BASIC] >> [AV JACK] >> [OUT]? 
When you use the headphones, set to [OUT/
Ë].
Playback (Pictures) 
1: Mosaic-pattern noise appears on images 
during cue or review playback.
 This phenomenon is characteristic of digital 
video systems. It is not a malfunction.
2: Horizontal stripes appear on images during 
cue and review playback.
 Horizontal stripes may appear depending on 
the scene, but this is not a malfunction.
3: Although the Camcorder is correctly 
connected to a TV, playback images cannot 
be seen.
 Have you selected video input on the TV? 
Please read the operating instructions of your 
TV and select the channel that matches the 
input terminals used for the connection.
4: Playback picture is not clear.
 Are the heads of the Camcorder dirty? If the 
heads are dirty, playback image cannot be 
clear. Clean the heads by using the head 
cleaner for digital video (optional). (
-72-)
LSQT0861Eng.book  70 ページ  ２００４年１２月２２日　水曜日　午後２時３４分