Panasonic Pv Dv702 Operating Instructions Manual

91
PC Connection
Transferring Your  Images  (Macintosh)
You can transfer images from your Palmcorder tape to your Macintosh.
Mac OS 9.0~9.1
Mac OS 8.6~9.1 (for ArcSoft Software)
iMac, iBook or Power Macintosh
® G3 with
USB port or Power Mac™ G4
RAM: 64 MB or more
CD-ROM drive (for installation)
System Requirements
(for Built-in SD Drive/ArcSoft Software)
USB Port
Mouse or other pointing device
210 MB minimum available hard disk
space (for ArcSoft Software)
High color (16 bit) or more (for...

92For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Transferring Your  Images  (Macintosh)
ArcSoft applications Installation
1Turn on the Macintosh.
2Insert the supplied Software
CD-ROM into the CD-ROM Drive.
3Double click the “Panasonic” icon.
Double click the “ArcSoft” Folder.
4Double click the “Panorama Maker
Installer,” “PhotoBase Installer,”
“PhotoImpression Installer,” and
“PhotoPrinter Pro Installer.”
5Follow the instructions as they appear
on...

93
For Your  Information
Palmcorder Accessory System
Accessory #
PV-DAC11A
CGR-D08A/1B
CGR-D16A/1B
CGP-D28A/1B
CGR-D53A/1K
PV-DDC9
PV-DRC9
PV-H150
RP-SD064BPPA
RP-SD032BPPA
RP-SD016BPPA
BN-SDCAPE/1B
BN-SDABPE/1B
Description
AC Adaptor with AC Cable
and DC Cable
800mAH / 1 h 30 min, Battery
Pack
1 600mAH / 3 h, Battery Pack
2 800mAH/ 5 h, Battery Pack
5 300mAH / 9 h, Battery Pack
DV Interface Cable (i.LINK)
(4-pin to 4-pin)
IR Remote Control
Carrying Case
64 MB SD Memory Card
32 MB SD Memory Card
16 MB SD...

94For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Palmcorder Accessory Order Form
TO OBTAIN ANY OF OUR PALMCORDER ACCESSORIES YOU CAN DO ANY OF THE
FOLLOWING:
VISIT YOUR LOCAL PANASONIC DEALER
OR
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368
[6 AM-5 PM M-F, 6 AM-10:30 AM SAT, PACIFIC TIME]
OR
MAIL THIS ORDER TO: PANASONIC SERVICES COMPANY ACCESSORY ORDER OFFICE
20421 84th Avenue South Kent, WA. 98032
Ship To:
Mr.
Mrs.
Ms.
First Last
Street...

95
For Your  Information
1Insert a rigid wire, such as an
extended paper clip into point (A)
and lift cover up.
2Using Tweezers or needle-nose
pliers, carefully remove bulb.
Take unit to servicenter if you need
assistance.
This product has a fluorescent lamp that contains a small amount of mercury. It also
contains lead in some components. Disposal of these materials may be regulated in
your community due to environmental considerations. For disposal or recycling
information please contact your local...

96For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Notes On Operations
Approximate Brightness Values
Your Palmcorder has been designed for normal scene illumination of 150 footcandles
(1500 lx). However, the Palmcorder may be used at F1:1.8, if illumination is more than
0.5 footcandles (5 lx).
The table below shows the color temperature for reference.
COLOR TINT
MIXTUREPALMCORDER
SETTINGS
(Blue Filter
Range)Bluish
Whitish
Yellowish
Reddish ARTIFICIAL...

97
For Your  Information
Specifications
Power Source:Palmcorder: 7.2 V DC (Battery)
7.8 V DC (AC Adaptor)
AC Adaptor: 110/120/220/240 V AC, 50/60 Hz
Battery: Lithium-Ion Type DC 7.2 V
Power Consumption:Palmcorder : 7.2 V/7.8 V DC 7 W (Max. 10 W)
AC Adaptor : 18 W
1 W (when not in use.)
Digital InterfaceUSB/i.LINK (IEEE1394)
Video Signal:EIA Standard (525 lines, 60 fields) NTSC color signal
Video Recording System:2 rotary heads, helical scanning system
Audio:12 bit (32 kHz) 4 tracks
16 bit (48 kHz) 2...

98For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Before Requesting Service
(a) Video Head Cleaning: Normally, your Palmcorder will not
require head cleaning. However, it is possible that the heads
may become clogged due to dust in the air, playing damaged
tapes, long term use, etc. If “NEED HEAD CLEANING”
appears for 5 seconds in the EVF or LCD monitor, the heads
may require cleaning.
(b) Cleaning the Heads: It is recommended that head cleaning
be...

99
For Your  Information
If you have a problem with your Palmcorder, it may be something you can correct
yourself.
Check the list below for symptoms and corrections.
No picture in the EVF or LCD Monitor...
Video cassette cannot be inserted...
Video cassette cannot be removed...
No operation starts when operation
buttons are pressed...
Recording cannot be done...
Auto Focus does not operate...
Sound from microphone cannot be
monitored...
Sound cannot be heard...
Symptom
Make sure the Power Source is...

100For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
The following warning displays appear in the EVF and the LCD monitor.
Indications
If the Palmcorder is in CAMERA mode without a cassette inserted,
“
” will flash and “TAPE NOT INSERTED” will appear for
5 seconds. Recording will not start.
If the Palmcorder is in CAMERA mode or Audio dub mode with
the cassette sliding record tab opened, “
” will flash and
“CHECK REC TAB” will appear for 5 seconds....