Panasonic Pv Dv53 Operating Instructions Manual

							Before attempting to connect, operate or adjust this product, please read these
instructions thoroughly.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
   LSQT0650B
        Model No. PV-DV53
Digital Video Camcorder
Operating Instructions
Mini
R
For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
DV53.p 1-4.p6503/01/21, 16:25 1 
						

							2For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Things You Should Know
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Thank you for choosing Panasonic!
You have purchased one of the most
sophisticated and reliable products on the
market today. Used properly, we’re sure it
will bring you and your family years of
enjoyment. Please take time to fill in the
information below. The serial number is on
the tag located on the underside of your
Palmcorder. Be sure to retain this manual
as your convenient Palmcorder information
source.
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock.
Therefore, it is dangerous to make any kind
of contact with any inside part of this unit.
This symbol alerts the user that important
literature concerning the operation and
maintenance of this unit has been included.
Therefore, it should be read carefully in order
to avoid any problems.
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The above markings are located on the appliance bottom cover.
Note: This equipment has been tested and found to comply with Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful
interference when operated in a residential environment.
If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, use the equipment in another location
and/or utilize an electrical outlet different from that used by the receiver.
If necessary, consult the dealer or an experienced radio/TV technician for help. You may
find the booklet, ‘Something About Interference’ available from FCC local regional offices
helpful.
FCC Warning:To assure continued FCC compliance, use only the specifed shielded
interface cable when connecting digital video camcorder to computer in
accordance with instruction herein. Also, any unauthorized changes or
modifications to this equipment would void the user’s authority to operate. Your 
Mini Palmcorder is designed to record and play back in Standard Play (SP) mode
and Long (LP) mode.
It is recommended that only cassette tapes that have been tested and inspected for use in
VCR machines with the 
Mini mark be used.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Safety Precautions
Declaration of Conformity
Model Number :PV-DV53
Trade Name :Panasonic
Responsibility  Party : Matsushita Electric Corporation of America
Address : One Panasonic Way Secaucus New Jersey 07094
Telephone Number : 1-800-211-PANA(7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
DV53.p 1-4.p6503/01/21, 16:25 2 
						

							3
Before Use11. Grounding or Polarization — This video unit may be
equipped with either a polarized 2-wire AC
(Alternating Current) line plug (a plug having one
blade wider than the other) or 3-wire grounding type
plug, a plug having a third (grounding) pin.
The 2-wire polarized plug will fit into the power outlet
only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still fails to fit, contact
your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
The 3-wire grounding type plug will fit into a
grounding type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding type plug.
12. Power-Cord Protection — Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords of
plugs, convenience receptacles, and the point
where they exit from the unit.
13. Outdoor Antenna Grounding — If an outside
antenna or cable system is connected to the video
unit, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Part 1 of
the Canadian Electrical Code, in USA Section 810
of the National Electrical Code, provides information
with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
14. Lightning — For added protection of this video unit
receiver during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the video unit due to lightning and power-line
surges. 1. Read Instructions — All the safety and operating
instructions should be read before the unit is
operated.
2. Retain Instructions — The safety and operating
instructions should be retained for future reference.
3. Heed Warnings — All warnings on the unit and in the
operating instructions should be adhered to.
4. Follow Instructions — All operating and maintenance
instructions should be followed.
5. Cleaning — Unplug this video unit from the wall outlet
before cleaning. Do not use liquid or aerosol
cleaners. Use a dry cloth for cleaning.
6. Attachments — Do not use attachments not
recommended by the video product manufacturer as
they may be hazardous.
7. Water and Moisture — Do not use this video unit near
water — for example near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, and the like.
8. Accessories — Do not place this video unit on an
unstable cart, stand, tripod, bracket, or table.  The
video unit may fall, causing serious injury to a child or
adult, and serious damage to the unit.  Use only with
a cart, stand, tripod, bracket, or table recommended
by the manufacturer, or sold with the video unit. Any
mounting of the unit should follow the manufacturer’s
instructions and should use a
mounting accessory
recommended by the
manufacturer.  An appliance and
cart combination should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the appliance and cart
combination to overturn.
9. Ventilation — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the video unit and to protect it from
overheating. These openings must not be blocked or
covered. Never place the video unit on a bed, sofa,
rug, or other similar surface, or near or over a radiator
or heat register. This video unit should not be placed
in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
10. Power Sources — This video unit should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer
or local power company. For video units intended to
be operated from battery power, or other sources,
refer to the operating instructions.
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
 NATIONAL ELECTRICAL CODE
NEC
ELECTRIC
SERVICE
EQUIPMENT
-
Important Safeguards
DV53.p 1-4.p6503/01/21, 16:25 3 
						

							4For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
15. Power Lines — An outside antenna system should
not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal.
16. Overloading — Do not overload wall outlets and
extension cords as this can result in a risk of fire or
electric shock.
17. Objects and Liquids — Never push objects of any
kind into this video unit through openings as they
may touch dangerous voltage points or short out
parts that could result in a fire or electric shock.
Never spill liquid of any kind onto the video unit.
18. Servicing — Do not attempt to service this video unit
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19. Damage Requiring Service — Unplug this video unit
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.b. If any liquid has been spilled into, or objects have
fallen onto, the video unit.
c. If the video unit has been exposed to rain or water.
d. If the video unit does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician to
restore the video unit to its normal operation.
e. If the video unit has been dropped or the cabinet
has been damaged.
f. When the video unit exhibits a distinct change in
performance — this indicates a need for service.
20. Replacement Parts — When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock or other hazards.
21. Safety Check— Upon completion of any service or
repairs to this video unit, ask the service technician to
perform safety checks to determine that the video
unit is in safe operating order.
USE & LOCATION
TO AVOID SHOCK HAZARD ...  Your Palmcorder and power supply should not be exposed to rain or moisture. Do
not connect the power supply or operate your Palmcorder if it gets wet. Your Palmcorder has been designed for
outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or direct
splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts of your
Palmcorder. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug your
Palmcorder from the power supply before cleaning.
DO NOT AIM YOUR PALMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS
DO NOT LEAVE THE PALMCORDER WITH THE EVF AIMED DIRECTLY AT THE SUN AS THIS MAY CAUSE
DAMAGE TO THE INTERNAL PARTS OF THE EVF
DO NOT EXPOSE YOUR PALMCORDER TO EXTENDED HIGH TEMPERATURE ...  Such as, direct sunlight,
inside a closed car, next to a heater, etc...  This action could permanently damage the internal parts of your
Palmcorder.
AVOID SUDDEN CHANGES IN TEMPERATURE ...  If the unit is suddenly moved from a cold place to a warm
place, moisture may form on the tape and inside the unit.
DO NOT LEAVE YOUR PALMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.
STORAGE OF YOUR PALMCORDER ...  Store and handle your Palmcorder in a manner that will not subject it to
unnecessary movement (avoid shaking and striking). Your Palmcorder contains a sensitive pick-up device which
could be damaged by improper handling or storage.
CARE
TO CLEAN YOUR PALMCORDER ...  Do not use strong or abrasive detergents when cleaning your Palmcorder
body.
TO PROTECT THE LENS ...  Do not touch the surface of the lens with your hand. Use a commercial Palmcorder
lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.
TO PROTECT THE FINISH OF YOUR PALMCORDER ...  Before handling your Palmcorder, make sure your hands
and face are free from any chemical products, such as suntan lotion, as it may damage the finish.
Important Safeguards
Precautions
DV53.p 1-4.p6503/01/21, 16:25 4 
						

							5
Before Use
Table of Contents
Camera
VCR
For Your  Information
Special Features
Things You Should Know ................................................................................................ 2
Important Safeguards ..................................................................................................... 3
Precautions .....................................................................................................................4
Before Using ....................................................................................................................6
Easy Cassette Eject/Insertion ................................................................................... 7
Self Demo Mode .......................................................................................................... 8
Quick Guide .....................................................................................................................9
Supplying Power ........................................................................................................... 11
Setting the Clock ........................................................................................................... 13
Using the Palmcorder Menu ......................................................................................... 14
Camera Recording ........................................................................................................ 15
Simple Recording ..................................................................................................15
Digital PhotoShot™ Mode .....................................................................................17
Zoom .....................................................................................................................18
Special Effect Features ................................................................................................. 20
Advanced Settings ........................................................................................................ 23
Palmcorder Accessory System ................................................................................... 46
Palmcorder Accessory Order Form ............................................................................ 47
Notes On Operations .................................................................................................... 48
Specifications ................................................................................................................ 50
Before Requesting Service .......................................................................................... 51
Request for Service Notice .......................................................................................... 52
On-Screen Displays (OSD) ........................................................................................... 53
Limited Warranty ........................................................................................................... 54
Customer Services Directory ...................................................................................... 55
Spanish Quick Use Guide/Guía Para Uso Rápido ...................................................... 56
MENU OSD ..................................................................................................................... 59
Electronic Viewfinder/LCD Monitor Indications .......................................................... 63
Index of Controls ........................................................................................................... 65
Index ............................................................................................................... Back Cover
Playback Your  Recordings ........................................................................................... 27
Special Effect Features ................................................................................................. 29
Digital Features ............................................................................................................. 33
Editing Features ............................................................................................................ 38
PC Connection .............................................................................................................. 42
PHOTOVU LINK (Optional) ............................................................................................ 44
DV53.p 5-8.p6503/01/21, 16:25 5 
						

							6For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
record tab
AY-DVM30EJ
AY-DVM60EJ Cassette type
60 minutes
45 minutes SPLP
90 minutes 30 minutesRecord Speed/
Playback time
AY-DVM80EJ 80 minutes 120 minutes Use only those tapes having the 
Mini
logo indicating the 6.35 mm digital
standard.
Record Speed/Playback TimeCassettes have a sliding record tab to
ensure recordings are not accidentally
erased.
Erase Protection
Before Using
1 pc. AC Adaptor
(PV-DAC11) with AC Cable
and DC Cable
1 pc. Shoulder Strap
(LSFC0012)1 pc. Battery Pack
(CGR-D08/CGR-D08R)
1 pc. Lens Cap (LSYF0521)
with Lens Cap Strap
(LSGQ0066)1 pc. A/V Cable
(LSJA0452)
Microsoft® and Windows® are registered trademarks of Microsoft in the United States
and other countries.
Intel
® Pentium® is a registered trademark.
i.LINK is a trademark.
PHOTOVU LINK is a registered trademark.
IBM is a registered trademark of IBM Company.
Unpack your Palmcorder
1To prevent accidental erasure:
Slide the tab to the left (open).
2To record again:Slide the tab to the right (close).
Open the Hand Strap as illustrated
at left.
Remove the Sensor tag.
Then, replace the Hand Strap.
How to remove the Sensor tag
1
2
1
2
Hand Strap
DV53.p 5-8.p6503/01/21, 16:25 6 
						

							7
Before Use
12
3
Before Using
Easy Cassette Eject/Insertion
If the Palmcorder is connected to a power
source, the cassette can be inserted and
ejected without turning the Palmcorder
on.
To remove the cassette...Slide TAPE EJECT to open the Cassette
Compartment Cover and pull the cassette
tape straight out.
Before you begin
Connect the Palmcorder to a power
source. (pp. 11, 12)
1LCD-OPEN
Cassette Compartment
Cover
2TAPE EJECT4PUSH
   CLOSE
1Press LCD-OPEN to unlock the LCD
monitor, and swing it fully open.
2Slide TAPE EJECT to open the
Cassette Compartment Cover.
3Insert a cassette record tab up,
window side facing out.
4Press PUSH CLOSE to close the
Cassette Compartment Cover.
1Undo the two strap ends
from their buckles.
2Thread the strap ends
through the Strap
Attachment Rings.
3Reinsert the strap ends through their
buckles.
Make sure the straps
are not twisted.
OR
1Loosen the strap from the Buckle and
create a loop.
2Pull the strap firmly through the
Buckle to shorten or lengthen the
strap.
1
Adjust the Length
Adjust the length of the Hand Strap to the
size of your hand as illustrated.
Attaching the Lens Cap Strap to the
Hand Strap:
Remove the Hand Strap from the front
clasp and thread the Strap through the loop
in the Lens Cap Strap.
Reattach the Hand Strap.
Lens Cap
Attaching the Shoulder Strap
2
13
Attaching the Lens Cap Strap:
Thread the Lens Cap Strap through the
Strap Attachment Ring as shown.
Hand Strap
Hand Strap
Note
When inserting the cassette, make sure it
is facing the right direction and then push
it in completely.
DV53.p 5-8.p6503/01/21, 16:25 7 
						

							8For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
[ EVF or LCD Monitor ]
Before you begin
Connect the Palmcorder to a power
source. (pp. 11, 12)
1Set POWER to CAMERA.
2Press MENU to display the CAMERA
FUNCTIONS menu screen.
3Rotate JOG KEY to select OTHER
 FUNCTIONS , and press JOG KEY to
display the OTHER FUNCTIONS menu
screen.
4Rotate JOG KEY to select DEMO
 MODE , and press JOG KEY to select
OFF.
Press MENU to exit.
Before Using
1Hold down LIGHT for more than
0.7 second to turn ON or OFF.
“
” will appear on the screen. To brighten the natural colors in a scene.
Using the Built-in Light
Caution
This light becomes hot during operation.
Make sure nothing covers the light during
operation. Using Light reduces battery time.
Provide adequate ventilation if using
Light in a hot environment for a long time.
Set LIGHT to OFF when not in use.
When replacing the bulb, see page 48.
Built-in Light
Note
Before you begin
Connect the Palmcorder to a power
source. (pp. 11, 12)
Set POWER to CAMERA.
1LIGHT
Note
1POWER
2MENU
3, 4
JOG KEY
Self Demo Mode
If no operation takes place for approx.
10 minutes after the AC Adaptor was
connected to the Palmcorder and the
POWER Switch was turned to CAMERA
without inser ting a Cassette, the
Palmcorder is automatically set to Self
Demo mode for introducing its function.
To turn it off, follow steps 1~4 below.
If any button is pressed or operated
(except PLAY/MULTI, ZOOM and LIGHT),
the Self Demo mode is canceled.
The Self Demo mode can be star ted by
setting DEMO MODE to ON and by
exiting the menu.
To turn Self Demo back on:
Set to DEMO MODE : ON in MENU
screen.
DV53.p 5-8.p6503/01/21, 16:25 8 
						

							9
Before Use
Quick Guide
Insert the Battery Pack
Insert Cassette
1Insert the Battery Pack and slide
it up until it locks with a click.
Before you begin
Charge the Battery. (p. 11)
12
These Palmcorders are equipped with the Easy Cassette Eject System so
it is easy to inser t or remove tapes, even when on a tripod. (p. 7)
1Press LCD-OPEN to unlock the LCD
monitor, and swing it fully open.
3Slide TAPE EJECT to open
the Cassette Compartment
Cover.
2Set POWER to VCR or
CAMERA.
4Insert a cassette record tab
up, window side facing out.
 Make sure the record tab
is closed. (p. 6)
5Press PUSH CLOSE mark to
close the Cassette
Compartment Cover.
DV53.p 9-11.p6503/01/21, 16:25 9 
						

							10For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Quick Guide
Camera Recording
When the LCD monitor is fully open, the
Viewfinder automatically tur ns OFF.
180°
90°
LCD Monitor
2Adjust the Vision Adjustment
Control to your eyesight.
4Press REC/PAUSE to start recording.
Press REC/PAUSE again to pause
recording.
Viewfinder
1Set POWER to CAMERA.
3Press LCD-OPEN to unlock
the LCD monitor. Swing it fully
open and adjust the angle.
To Watch Playback in the LCD
(Liquid Crystal Display)
When the LCD monitor is fully open, the
Viewfinder automatically tur ns OFF.
3Press  (REW)
to rewind the tape.4Press  (PLAY) to start
playback.
5Press  (STOP) to stop
playback.
Before you begin
Charge the Battery. (p. 11)
2Press LCD-OPEN to unlock the LCD
monitor. Swing it fully open and
adjust the angle.
180°
90°1Set POWER to VCR.
DV53.p 9-11.p6503/01/21, 16:25 10