Panasonic Pv Dv103 Operating Instructions Manual

							61
For Your  Information
Customer Services Directory
For Product Information, Operating Assistance, Literature Request, Dealer Locations,
and all Customer Service inquiries please contact:
1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 9 am-7 pm, EST.
or send e-mail : [email protected]
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Service in Puerto Rico
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter:
Ave. 65 de Infanteria. Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787) 750-4300   Fax (787) 768-2910
Web Site: http://www.panasonic.com
You can purchase parts, accessories or locate your
nearest servicenter by visiting our Web Site.
Accessory Purchases:
1-800-332-5368 (Customer Orders Only )
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032
(Monday-Friday 6 am-5 pm; Saturday 6 am-10:30 am, PST)
(Visa, MasterCard, Discover Card, American Express, Check)
As of August 2002
MAIL TO  :
Panasonic Services Company
1705 N. Randall Road,
Elgin, IL 60123-7847
Attention: Camcorder Repair
Please carefully pack and ship, prepaid and insured, to the Elgin Centralized Factory Servicenter.
Customer’s in Puerto Rico, please ship or carry in to location below (“Service in Puerto Rico”).
Product RepairsCentralized Factory Servicenter
DV103.p60-64.p6503/02/07, 10:50 61 
						

							62For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Spanish Quick Use Guide/Guía Para Uso Rápido
Este símbolo tiene por finalidad alertar al
usuario acerca de la presencia de tensión
sin aislación en el interior del producto, que
puede tener la intensidad suficiente como
para causar descargas eléctricas. Por lo
tanto, hacer contacto con cualquier pieza
en el interior de la unidad es peligroso.
Este símbolo tiene por finalidad alertar al
usuario de la presencia de importantes
instrucciones de operación y
mantenimiento en la literatura incluida con
la unidad. Por lo tanto, lea detenidamente
la literatura incluida para evitar problemas.PRECAUCIÓNRIESGO DE DESCARGA ELÉCTRICANO ABRIR
PRECAUCIÓN: PARA REDUCIR EL RIESGO DE
DESCARGA ELÉCTRICA, NO QUITE LA
CUBIERTA (O PARTE POSTERIOR).
EL APARATO NO TIENE EN SU INTERIOR PIEZAS
QUE PUEDAN SER REPARADAS POR EL USUARIO.
SOLICITE TODA REPARACIÓN A PERSONAL DE
SERVICIO CUALIFICADO.
La etiqueta de régimen está pegada en la base de la cubierta del cargador. Su 
Mini Palmcorder está diseñada para grabar y reproducir en el modo de Reproducción
Estándar (SP) y modo Largo (LP).
Se recomienda el uso sólo de cintas de cassette que hayan sido probadas e
inspeccionadas para su uso en aparatos VCR con la marca 
Mini.
ADVERTENCIA: PARA EVITAR INCENDIOS Y DESCARGAS
ELÉCTRICAS, NO EXPONGA ESTE EQUIPO A LA LLUVIA NI A
LA HUMEDAD.
Este dispositivo cumple con la parte 15 de las Reglas del FCC. El funcionamiento está
sujeto a las dos siguientes condiciones: (1) Este dispositivo puede no causar
interferencias perjudiciales, y (2) este dispositivo debe aceptar cualquier interferencia
recibida, incluyendo interferencias que pueden causar un funcionamiento no deseado.
Nota:Este equipo ha sido puesto a prueba y se encontró que cumple con la Parte 15
de las reglas del FCC. Estos limites están diseñados para proveer una
protección razonable contra interferencias cuando se opera en un ambiente
residencial.
Si este equipo causa interferencias en la recepción de radio o televisión, lo cual
se puede comprobar al apagar y encender el equipo, utilice el equipo en otra
ubicación y/o utilice un tomacorriente diferente al que está utilizando el receptor.
Si es necesario, consulte con el distribuidor o un técnico experto de radio/TV
para solicitar ayuda. Puede encontrar útil el folleto ‘Información sobre las
interferencias’ disponible en las oficinas regionales del FCC local.
Advertencia del FCC:
Para asegurar la conformidad  continua del FCC, utilice solamente el cable de
interfaz blindado cuando conecte una cámara de video digital a una
computadora de acuerdo con las instrucciones incluidas aquí. También,
cualquier cambio sin autorización o modificaciones a este equipo anularían la
autoridad del usuario para operarlo.
Precauciones para su seguridad
DV103.p60-64.p6503/02/07, 10:50 62 
						

							63
For Your  Information
Spanish Quick Use Guide/Guía Para Uso Rápido
Inserte de la bateríaAntes de comenzar
Cargue la battería. (Página 14.)
Inserte el Cassette
Esta videocámara contiene un sistema de ejecución fácil del cassette. Por eso,
es fácil de introducir o sacar el cassette aunque esté montado sobre un
trípode. (Página 7.)
1Coloque la batería y deslícela hacia arriba hasta que
se quede bloqueada con un clic.
12
2Deslice el interruptor de
expulsión de cinta (TAPE
EJECT) para abrir la tapa del
compartimento del cassette.1Ajuste el interruptor
de alimentación
(POWER) a la posición
VCR o CAMERA.
3Introduzca un cassette con
la parte de la ventana hacia
arriba.
Asegúrese de que la
lengüeta de grabación esté
cerrada. (Página 6.)
4Presione la marca PUSH
CLOSE (EMPUJAR PARA
CERRAR) para cerrar la
tapa del compartimiento del
cassette.
DV103.p60-64.p6503/02/07, 10:50 63 
						

							64For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Para ver la reproducción en el LCD
(pantalla de visualización de cristal líquido)
Cuando el monitor LCD se enchuentra totalmente
abier to, el visor se DESACTIVA automáticamente.Antes de comenzar Cargue la battería. (Pàgina 14.)
Spanish Quick Use Guide/Guía Para Uso Rápido
Grabación con la cámara
Cuando el monitor LCD se enchuentra totalmente
abjer to, el visor se DESACTIVA automàticamente.
180°
90°
Monitor LCD
2Ajuste el control lde ajuste de
visión según lo desee.
4Presione el botón de grabación/pausa
(REC/PAUSE) para iniciar la grabación.
Vuelva a pulsar el botón de grabación/
pausa (REC/PAUSE) para hacer una
pausa en la grabación.
Visor
1Ajuste el interruptor de alimentación
(POWER) a la posición CAMERA.
3Utilice la lengüeta OPEN para
desbloquear el monitor LCD.
Balancée abriéndolo
completamente y ajuste el àngulo.
2Utilice la lengüeta OPEN para desbloquear el monitor LCD.
Balancée abriéndolo completamente y ajuste el àngulo. 180°
90°
1Ajuste el interruptor de
alimentación (POWER) a
la posición VCR.
3Presione el botón de
rebobinado 
 (REW)
para rebobinar la cinta.4Presione el botón de
reproducción  (PLAY)
para reproducir la cinta.
5Presione el botón de
parada  (STOP) para
detener la reproducción.
DV103.p60-64.p6503/02/07, 10:50 64 
						

							65
For Your  Information
MENU OSD
Camera Mode Menu Screen
1
3
4
5
6
7
8
9
102
D. ZOOM (p. 38)
To select 25X (from 10X to 25X) or
700X (from 10X to 700X).
Setting to OFF cancels the previously
selected digital zoom.
CINEMA (p. 23)
When set to ON, you can record a
picture compatible with a wide-screen
TV equipped with an S2 picture
terminal.
EFFECT (p. 41)
To select one of the 10 digital
functions.
Setting to OFF cancels the previously
selected digital function.
REC SPEED (pp. 6, 18)
SP:Normal recording speed mode.
LP:Recording time is 1.5 times as
long as in the SP mode. For
example, 120 minutes of
recording is possible on a
80 minute tape.
AUDIO REC (p. 43)
12 bit:The sound is recorded in the
12 bit/32 kHz mode.
16 bit:The sound is recorded in the
16 bit/48 kHz high-quality
mode.
SCENEINDEX
DAY:An index signal is recorded
when recording is restarted
after the date has changed
since the last recording.
2 HOUR:An index signal is recorded
when recording is restarted
after a lapse of more than
2 hours.
WIND CUT (p. 29)
To reduce sound distortion caused by
wind hitting the microphone.
ZOOM MIC (p. 21)
When set to ON, the microphone’s
directional angle and sensitivity vary
according to the zoom operation. PROG. AE (p. 24)
To select one of the 5 Program AE
modes. Setting to OFF cancels the
previously selected Program AE
mode.
PROGRESSIVE (p. 20)
When set to ON, still pictures taken
with PhotoShot are recorded with a
higher resolution than with normal
PhotoShot.
1
3
4
2
5
6
7
8
9
10
DV103.p65-66.p6503/02/07, 10:50 65 
						

							66For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
13
14
15
16
17
18
19
MENU OSD
20
21
DISPLAY (p. 70)
To select the desired type of display
changes to all function display, Partial
display, and Minimum display.
LCD/EVF SETUP (p. 19)
Setting to ON displays the menu for
adjusting the LCD brightness, color
level, and the EVF brightness.
REMOTE (p. 10)ly
VCR1:To receive signals from the
Remote Control, set to VCR1.
VCR2:To receive signals from
the Remote Control, set to
VCR2.
OFF:To prevent reception of
signals from the Remote
Control.
BEEP SOUND
Set to ON to hear beep when starting
and stopping camera recording or
when unusual conditions occur. To
cancel the beep, set to OFF.
Palmcorder will beep:
Once when you start recording
Twice when you stop recording
Repeatedly when warning of
unusual conditions. (p. 58)
SHTR EFFECT (p. 20)
When set to ON, still pictures taken in
the PhotoShot mode are recorded
with a visual shutter effect and click
sound.
CLOCK SET (p. 14)
When set to ON, the date and time
can be set on the screen.
SELF REC (p. 22)
NORMAL:During self-recording, the
picture on the LCD Monitor is the
same as it will be recorded.
MIRROR:During self-recording, the
picture on the LCD Monitor is
horizontally reversed.
DEMO MODE (p. 11)
When set to ON, Self Demo starts. DATE/TIME (p. 69)
The date and time can be set and
displayed on the screen.
C. DISPLAY (p. 70)
To select the desired type of counter
indication displayed on the LCD
Monitor or in the viewfinder.
C. RESET (p. 70)
Setting to ON resets the counter to
zero.
11
12
13
14
15
17
16
18
19
20
21
11
12
DV103.p65-66.p6503/02/07, 10:50 66 
						

							67
For Your  Information
VCR Mode Menu Screen1
2
6
MENU OSD
5
4
3
BLANK SEARCH (p. 31)
Select ON to go directly to a blank
portion of the tape.
SEARCH (p. 35)
To select the desired Index Search
function.
PHOTO:To search for Photo shot
pictures.
SCENE:To search for scenes marked
with Index signal.
12bit AUDIO (p. 44)
To select the desired audio playback
mode after performing audio dubbing
in the 12 bit mode (SP mode only).
ST1 :The original sound alone is
played back.
ST2 :The dubbed sound alone is
played back.
MIX :The original sound and the
dubbed sound are played back
together.
MULTI SPEED (p. 36)
In Strobe Multi mode, used to select
the interval at which a succession of
still screens are captured from the
playback picture.
FAST :Every 0.3 seconds
NORMAL :Every 0.6 seconds
SLOW :Every 1.0 seconds
EFFECT1 (p. 41)
To select one of the 6 digital functions.
Setting to OFF cancels the previously
selected digital function.
EFFECT2 (p. 41)
To select one of the 2 digital picture
effects for playback. Setting to OFF
cancels the previously selected digital
effect.
D. ZOOM (p. 39)
Set to ON to double the size of a
playback image. Setting to OFF
cancels the previously selected digital
zoom.
7
5
6
1
2
3
4
7
DV103.p67-68.p6503/02/07, 10:50 67 
						

							68For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
11
12
13
14
15
MENU OSD
10
9
8REC SPEED (p. 6)
SP:Normal recording speed
mode.
LP:Recording time is 1.5 times as
long as in the SP mode. For
example, 120 minutes of
recording is possible on an
80 minute tape.
AUDIO DUB (p. 43)
Set to AUDIO DUB “ON” in the Menu
OSD to use the Audio Dub feature.
DATE/TIME (p. 69)
The date and time can be set and
displayed on the screen.
C. DISPLAY (p. 70)
To select the desired type of counter
indication displayed on the LCD
Monitor or in the viewfinder.
C.RESET (p. 70)
Setting to ON resets the counter to
zero.
DISPLAY (p. 70)
To select the desired type of display
changes to all function display, Partial
display, and Minimum display.
LCD/EVF SETUP (p. 19)
Setting to ON displays the menu for
adjusting the LCD brightness, color
level, and the EVF brightness.
REMOTE (p. 10)
VCR1 :To receive signals from the
Remote Control, set to VCR1.
VCR2 :To receive signals from the
Remote Control, set to VCR2.
OFF :To prevent reception of signals
from the Remote Control.
CLOCK SET (p. 16)
When set to ON, the date and time can
be set on the screen.
16
8
9
11
12
13
10
14
15
16
DV103.p67-68.p6503/02/07, 10:50 68 
						

							69
For Your  Information
Here are some of the basic indications which will appear on the Palmcorder EVF and LCD
Monitor. Only Date and Time indications will be recorded onto the tape.
Battery Remaining
Tape Remaining
It will take several seconds for the tape
remaining indicator to operate after the
tape starts moving.
CINEMA Indication
(Menu OSD: p. 65)
Digital Zoom and other Digital
Functions (Menu OSD: p. 65)
This display appears when the digital
zoom function has been activated.
Playback Effect (Menu OSD: p. 67)
This display appears when SEPIA or
B/W is selected in VCR menu.
Volume Display (p. 31)
The volume bar appears when the
volume of the built-in speaker is being
adjusted.
(AY-DVM30EJ)(AY-DVM60EJ)
FULL
EMPTY
R0:30
R0:00
R1:00
R0:00
a
b
c
d
e
Electronic Viewfinder/LCD Monitor Indications
CAMERA/VCR Mode
a
b
c
d
e
f
f
g
h
h
g
Date and Time Indication
(Menu OSD: pp. 66, 68)
As shown below, the date and time
indication changes each time DATE/TIME
is selected from the Palmcorder’s MENU
(Menu OSD: pp. 66, 68) or the DATE/TIME
Button is pressed on the remote.
D/T
(DATE/TIME)
DATE
OFF
Tape Speed Indication
(Menu OSD: p. 65)
Indicates the tape speed  (SP or LP).
MNL Indication (pp. 26~29)
This display appears when AUTO/
MANUAL is pressed to MANUAL.
i
i
DV103.p69-71.p6503/02/07, 10:50 69 
						

							70For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Electronic Viewfinder/LCD Monitor Indications
jCAMERA/VCR Modekl
WARNING Indication (p. 58)
The warning displays appear in the
EVF and the LCD monitor.
Counter/Time Code
The indication switches as shown
below when the desired “C. DISPLAY”
mode is selected from the menu.
(Menu OSD: pp. 66, 68)
Memory Counter M 0:00.00
The Palmcorder will stop whenever it
reaches the point where the counter was
previously set to M 0:00.00 during audio
dub, fast forward, or rewind.
Time Code 0h00m00s00f
The Palmcorder calculates and displays
exactly where you are on any tape in terms
of hours, minutes, seconds, and frames
(30 frames = 1 second).
This display cannot be reset.
Linear Time  Counter
Memory Counter
Time Code
j
k
IMPORTANT NOTE:
Display must be set to ALL for MF, AE,
W.BALANCE or BACK LIGHT indications
to be displayed on the EVF or LCD Panel
when selected.
C.RESET does not work when C. DISPLAY
is set to T.CODE.
Tape Mode Indications
RECRecording.
PHOTOPhotoShot recording.
PAUSEPaused during recording.
Playback.
Still.
Slow (forward).Slow (reverse).
Frame Advance (forward).
Frame Advance (reverse).
R Repeat Playback.
CHKRecording Check.
FFFast forward.
REWRewind.
FF Search.
REW Search.
BLANKBlank Search.
SEARCHIndex Search.
l
m
mMAGICPIX Indication (p. 39)
This display appears when MAGIC
PIX is pressed.
DV103.p69-71.p6503/02/07, 10:51 70