Panasonic Pv Dc352 Operating Instructions Manual

51
Using the G726 Decoder
G726 Decoder allows you to listen to MPEG4 sound with Windows Media 
Player. Install it from enclosed CD-ROM.
In order for the G726 Decoder to be installed, the hard disk must have at 
least 16 MB of free space. Before proceeding with installation, check out the 
amount of free space on the hard disk.
For Windows
®
≥Microsoft Windows® XP, Windows® Me, Windows® 98SE, Windows®2000 
Professional pre-installed PC. Also, DirectX 6,7,8 random, DirectX Media 6 
or WMP 6-6.4, WMP7 must...

52
Check if Palmcorder is correctly recognized
1Verify [Removable Disk] icon is added in [My Computer].
≥Drive name (H: etc.) may vary depending on your computer.
≥If Palmcorder is connected to the computer before the driver is installed, or 
you are using the driver that came with Windows, then it may not be able to 
correctly recognize Palmcorder.
≥If it doesn’t function properly, check to see if the driver was correctly 
installed, and update the driver if necessary.
~~~~~~~~~~~~~~~~~~~~~~~~To...

53
Verifying and updating driver
Windows 98 SE
Verify and update driver while Palmcorder is connected to the computer.
ªVerifying driver
(Palmcorder must be connected to computer.)
1
Select [Start] >> [Settings] >> [Control Panel], double click 
[System] select device driver tab, verify 
[Panasonic DVC USB Driver] and 
[Panasonic DVC Port Driver] are displayed in 
[Universal Serial Bus controllers] of [Device Manager].
≥If [DVC] is displayed in [Other devices] of [Device Manager] tab, we 
recommend...

54
Windows 2000 Professional
Verify and update driver while Palmcorder is connected to the computer.
ªVerify driver
(Palmcorder must be connected to computer.)
1
Select [Start] >> [Settings] >> [Control Panel], double click 
[System] Hardware tab, [Device Manager]. Verify 
[Panasonic DVC USB Driver] and [USB Root Hub] in 
[Universal Serial Bus controllers] of [Device Manager] of 
[Hardware].
≥If [USB Mass Storage Device] is shown in [Universal Serial Bus 
controllers] of [Device Manager] tab, we...

55
Windows Me
Verify and update driver while Palmcorder is connected to the computer.
ªVerifying driver
(Palmcorder must be connected to computer.)
1
Select [Start] >> [Settings] >> [Control Panel], double click 
[System], Device Manager tab and verify 
[Panasonic DVC USB Driver] is displayed in 
[Universal Serial Bus controllers] of [Device Manager].
≥If [USB Mass Storage Device] is displayed in [Universal Serial Bus 
controllers] of [Device Manager] tab, we recommend updating the driver 
by following...

56
Windows XP
Verify the driver while Palmcorder is connected to the computer.
ªVerifying driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Control Panel] >> 
[Performance and Maintenance], double click [System], 
Hardware tab, Device Manager.
Please make sure that you can see the following drivers that come with 
Windows.
1. Matsushita DVC USB Device
2. Generic Volume
3. USB Mass Storage Device
~~~~~~~~~~~~~~~~~~~~~~~~If you no longer need software or driver (uninstall)...

57
Notes
≥Do not disconnect USB Connection Cable while the 
operation light of Palmcorder is on. It may freeze the 
software or destroy the data in transfer. Please refer to the 
user manual of Palmcorder.
≥We recommend using the AC adapter as the power source 
for the Palmcorder when using USB Connection Kit. Data 
may be lost If the battery power is lost while transferring 
data.
≥G726 may not recognize memory card files not created by 
Palmcorder.
≥Do not delete the folders in memory card such as...

58
Others
Indications
Various functions and Palmcorder conditions are displayed 
on the screen.
1) Remaining Battery Power [r]
≥When the battery power becomes low, the indication 
changes. When the battery is discharged completely, 
the 
u ( v) Indication flashes.
≥When you are using the AC Adaptor, the [s] 
Indication may appear, however, this has no meaning 
in this case.
2) Remaining Tape Time [R0:00]
≥Remaining tape time is indicated in minutes. When it 
reaches less than 3 minutes, the indication...

59
11) Recording Mode
≥AUTO: This appears when Mode Selector Switch is 
set to [AUTO]. (l 21)
≥MNL: This appears when Mode Selector Switch is 
set to [MANUAL]. (l 25, 26, 27)
Electronic Image Stabilizer [EIS] (l 23)
1.5 Times Tele Jump Zoom Function [ ] (l 22)
Audio Dubbing Input Display [MIC/AV IN] (l 36)
Audio Recording Mode [12bit/16bit] (l 20)
12) Manual Focus [MF] (l 26)
Backlight Mode [ª] (l 24)
Program AE Mode
≥5: Sports Mode (l 25)
≥7: Portrait Mode (l 25)
≥4: Low Light Mode (l 25)
≥Ω: Spotlight...

60 ªChanging the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY SETUP] 
Sub-Menu, you can change the Counter Display Mode to 
Tape Counter Indication (0:00.00), Memory Counter 
Indication (M0:00.00), and Time Code Indication 
(0h00m00s00f).
≥You can also press the [COUNTER] Button of the Remote 
Controller repeatedly to change the Counter Indication.
ªDisplaying Date/Time Indication
To display Date/Time Indication, set the appropriate date/
time in [DATE/TIME] on the [DISPLAY SETUP]...