Panasonic Protocol Converter Aw If400g Operating Instructions
Have a look at the manual Panasonic Protocol Converter Aw If400g Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 7
- 6 (E) -
ENGLISH
Major operating controls and their functions
Power LED [POWER]This lights up green when DC power is supplied to the DC
12 V input connector
.
Transmission Status LED [COMMUNICATE]This lights up when data is being transmitted between the
controller and pan/tilt head.
Extended Distance Transmission LED [EXTENSION]This lights up when this unit is used to extend the
transmission distance between AW-RP400 and
AW-PH400.
Front panel](http://img.usermanuals.tech/thumb/58/68300/w64_aw-if400g_en_om_d-6.png "Page 7
- 6 (E) -
ENGLISH
Major operating controls and their functions
Power LED [POWER]This lights up green when DC power is supplied to the DC
12 V input connector
.
Transmission Status LED [COMMUNICATE]This lights up when data is being transmitted between the
controller and pan/tilt head.
Extended Distance Transmission LED [EXTENSION]This lights up when this unit is used to extend the
transmission distance between AW-RP400 and
AW-PH400.
Front panel")
![Page 8
- 7 (E) -
Major operating controls and their functions
Rear panel
Controller connector [CONTROLLER]Use the controller CONTROL OUT TO PAN/TILT terminal
and a 10BASE-T (equivalent to UTP category 5) straight
cable for connection. Pan/tilt head connector [PAN-TILT HEAD]Use the pan/tilt head IP/RP terminal and a 10BASE-T
(equivalent to UTP category 5) straight cable for
connection.](http://img.usermanuals.tech/thumb/58/68300/w64_aw-if400g_en_om_d-7.png "Page 8
- 7 (E) -
Major operating controls and their functions
Rear panel
Controller connector [CONTROLLER]Use the controller CONTROL OUT TO PAN/TILT terminal
and a 10BASE-T (equivalent to UTP category 5) straight
cable for connection. Pan/tilt head connector [PAN-TILT HEAD]Use the pan/tilt head IP/RP terminal and a 10BASE-T
(equivalent to UTP category 5) straight cable for
connection.")
This is used to select the operations of the AW-IF400.
Before changing a setting, the power must be turned off.
SETUP No.3 is the tilt range selector switch which is used
to control the AW-PH400 from the AW-RP605A.
At the ON position, the range is 300 degrees; at the OFF
position, it is 190 degrees. For any other...](http://img.usermanuals.tech/thumb/58/68300/w64_aw-if400g_en_om_d-8.png "Page 9
- 8 (E) -
ENGLISH
Major operating controls and their functions
Function Switches [SW1, SW2, SET UP](Factory defaults: SW1 = OFF, SW2 = OFF,
SET UP No.1 = ON, SET UP No.2 to 4 = OFF)
This is used to select the operations of the AW-IF400.
Before changing a setting, the power must be turned off.
SETUP No.3 is the tilt range selector switch which is used
to control the AW-PH400 from the AW-RP605A.
At the ON position, the range is 300 degrees; at the OFF
position, it is 190 degrees. For any other...")
- 10 (E) - ENGLISH Connections CONTROL OUT TO PAN/TILT HEAD Main unit Control panel (max. 1000 m) (max. 500 m) Multi-function controller AW-RP605A 10BASE-T (UTP category 5) straight cable AC adapter AW-PS505A Convertible camera Camera cable supplied with AW-PH400 AC power cable supplied with AW-PH400 Protocol converter AW-IF400G AC adapter AW-PS505A Zoom lens IP/RP Indoor pan/tilt head AW-PH400 When controlling AW-PH400 from AW-RP605A (AW-RP605) • Switch settings SW1SW2SET UP 1234 OFFOFFONOFFON(300 deg)OFF(190 deg)OFF
- 11 (E) - Connections (max. 1000 m)(max. 500 m) Multi hybrid control panel AW-RP555 10BASE-T (UTP category 5) straight cable AC adapter AW-PS505A Convertible camera Camera cable supplied with AW-PH400 AC power cable supplied with AW-PH400 Protocol converter AW-IF400G AC adapter AW-PS505A Zoom lens IP/RP Indoor pan/tilt head AW-PH400 When controlling AW-PH400 from AW-RP555 • Switch settings SW1SW2SET UP 1234 OFFOFFONOFFON(300 deg)OFF(190 deg)OFF
- 12 (E) - ENGLISH Connections (max. 1000 m)(max. 500 m) Multi-function controller AW-RP655 10BASE-T (UTP category 5) straight cable AC adapter AW-PS505A Convertible camera Camera cable supplied with AW-PH400 AC power cable supplied with AW-PH400 Protocol converter AW-IF400G AC adapter AW-PS505A Zoom lens IP/RP Indoor pan/tilt head AW-PH400 When controlling AW-PH400 from AW-RP655 • Switch settings SW1SW2SET UP 1234 OFFOFFONOFFON(300 deg)OFF(190 deg)OFF
- 13 (E) - Connections When controlling AW-PH350 from AW-RP400 CONTROL IN IP/RP Indoor pan/tilt headAW-PH350 Pan/tilt control panel AW-RP400 CONTROL OUT TO PAN/TILT HEAD 10BASE-T (UTP category 5) straight cable Protocol converter AW-IF400G Remote operation panel AW-CB400 AC adapter AW-PS505A Convertible camera Camera cable AW-CA50T29 AW-CA50C29 AC adapter AW-PS300A Zoom lens AC adapter AW-PS505A (max. 500 m) (max. 1000 m) • Switch settings SW1SW2SET UP 1234 OFFONOFFONOFFOFF
- 14 (E) - ENGLISH Connections When controlling AW-PH360 from AW-RP400 (The tracing memory function is not available.) Set the SW1 switch on the CPU circuit board of AW-PH360 to “For RP605”. (For details, refer to the operating instructions for the AW-PH360.) CONTROL IN IP/RP Indoor pan/tilt head AW-PH360 Pan/tilt control panel AW-RP400 CONTROL OUT TO PAN/TILT HEAD 10BASE-T (UTP category 5) straight cable Protocol converter AW-IF400G Remote operation panel AW-CB400 AC adapter AW-PS505A Convertible camera Camera cable supplied with AW-PH360 AC adapter AW-PS300A Zoom lens AC adapter AW-PS505A (max. 500 m) (max. 1000 m) • Switch settings SW1SW2SET UP 1234 OFFONOFFONOFFOFF
- 15 (E) - Connections When controlling AW-PH650 from AW-RP400 ( For the connections of the AW-PH650 pan/tilt head, camera housing, and camera, refer to the operating instructions for the AW-PH650.) Pan/tilt control panel AW-RP400 CONTROL OUT TO PAN/TILT HEAD 10BASE-T (UTP category 5) straight cable Protocol converter AW-IF400G Remote operation panel AW-CB400 AC adapter AW-PS505A AC adapter AW-PS505A (max. 500 m) (max. 1000 m)• Switch settings SW1SW2SET UP 1234 OFFONOFFONOFFOFF Outdoor pan/tilt head AW-PH650 To be locally purchased RJ-45 relay adapter REMOTE POWER
- 16 (E) - ENGLISH Connections Pan/tilt control panelAW-RP400Remote operation panel AW-CB400 CONTROL OUT TO PAN/TILT HEAD 10BASE-T (UTP category 5) straight cable Protocol converter AW-IF400G IP/RP Indoor pan/tilt head AW-PH400 When using the extended distance transmission function of AW-RP400 and AW-PH400 AC adapter AW-PS505A Convertible camera Camera cable supplied with AW-PH400 AC power cable supplied with AW-PH400 Zoom lens AC adapter AW-PS505A (max. 500 m) (max. 500 m) • Switch settings SW1SW2SET UP 1234 ONONOFFOFFOFFOFF
- 17 (E) - Indoor pan/tilt headAW-PH360 Pan/tilt control panel AW-RP400 CONTROL OUT TO PAN/TILT HEAD 10BASE-T (UTP category 5) straight cable Protocol converter AW-IF400G Remote operation panel AW-CB400 AC adapter AW-PS505A Convertible camera Camera cable supplied with AW-PH360 AC adapter AW-PS300A Zoom lens AC adapter AW-PS505A (max. 500 m) (max. 500 m) Connections When using the extended distance transmission function of AW-RP400 and AW-PH360 (The tracing memory function is available.) • Switch settings SW1SW2SET UP 1234 ONONOFFOFFOFFOFF
- 18 (E) - ENGLISH 1/4(6) 1-15/16(50) 9/16(15) 5-11/16(145) 3-3/8(85) 1-3/16(30) Appearance For mounting and other applications, use the screw (M3 screw) holes in the side panels. Do not use screws longer than 10 mm. Unit: inch (mm) M3 screw hole (in 4 locations) ( Located in the same positions on both sides)
- 19 (E) - Specifications Controller supported: AW-RP400, AW-RP555, AW-RP605, AW-RP605A, AW-RP655 Pan/tilt head supported: AW-PH350, AW-PH360, AW-PH400, AW-PH650 Input connectors DC 12 V IN socket: Supply DC 12 V from the general-purpose AC adapter. (Recommended AC adapter: AW-PS505A) Input/Output connector CONTROLLER: RJ45, modular jack 10BASE-T straight cable (UTP category 5) PAN-TILT HEAD: RJ45, modular jack 10BASE-T straight cable (UTP category 5) Switch functions: Controller / Pan/Tilt Head selector switch (SW1, SW2, SET UP) Indicator: POWER, COMMUNICATE, EXTENSION Allowable operating temperature: 14°F to 113°F (–10°C to +45°C) Ambient operating humidity: 30% to 90% (no condensation) Dimensions (WHD): 5-11/16”1-3/16”3-3/8” (1453085 mm) (excluding rubber feet) Weight: Approx. 0.9 lbs. (0.4 kg) Finish: AV ivory paint (color resembling Munsell 7.9Y 6.8/0.8) Weight and dimensions indicated are approximate. Specifications are subject to change without notice. Source voltage: DC 10.8 V to DC 16.0 V Power consumption: 1.5 W indicates safety information.