Panasonic Projector Pt Lw80ntu Operating Instructions

PICTURE menu
ENGLISH - 31
Settings
You can perform more detailed image adjustment 
manually.
JFor S-VIDEO/VIDEO signals
QTV-SYSTEM
When the video signal is changed, the setting 
switches automatically. You can switch the setting 
manually to match the video data. Press I H to 
cycle through the options.
QSTILL MODE
You can reduce the vertical flicker when projecting 
a still image.
 OFF: Deactive
 ON: Active
QNOISE REDUCTION
You can switch the automatic noise reduction 
system on/off. Press I H to select...

ENGLISH - 32
Settings
POSITION menu
If the projector is aligned non-perpendicularly to the 
screen, or if the projection screen has an angled surface, 
the keystone will be corrected automatically. Press I H 
to select the required setting.
 ON: Active
 OFF: Deactive
If you need to correct the angle of the projection even 
when the REALTIME KEYSTONE is activated, you can 
correct the keystone manually.You can move the projected image for fine adjustment. 
Press I H to move horizontally and F G...

POSITION menu
ENGLISH - 33
Settings
You can switch the aspect ratio manually when needed. 
Press I H to cycle through the options.
JAspect ratio options
QAUTO
Signals which contains an identifying aspect signal 
will be detected and automatically project the 
image in proper ratio.
Q4:3
When a 4:3 or 5:4 signal is detected, the image will 
be projected without any change, and other signals 
will be adjusted to 4:3 with preserving original ratio.
Q16:9
When a 16:10, 16:9 or 15:9 signal is detected, the...

Settings
POSITION menu
ENGLISH - 34
JAspect ratio depend on signals 
and SCREEN FORMAT menu 
option
If the 4 edges of an image is partly dropped, you can use 
this function to adjust and project it properly. (Not 
available with signals of COMPUTER/WIRELESS)
 H: Enlarge
 
I:Shrink
If the projected image is degraded, you can activate 
FRAME LOCK for synchronisation. Press I H to select 
the required option. (Available with signals of RGB only)
 OFFDeactive
 ONActive
SCREEN 
FORMAT 
menu
ASPECT menu...

ENGLISH - 35
Settings
OPTION menu
When you change the input method, the guidance 
appears in the upper right corner of the screen. The 
following display methods are available. Press I H to 
cycle through the options.
You can switch the logo on/off that is displayed when 
starting up the projector. Press I H to select the 
required option. STARTUP LOGO will be displayed for 
30 seconds.
 ONActive
 USERDisplay the original text
 OFFDeactive
QEditing the original text
If you select USER, you can display a...

Settings
OPTION menu
ENGLISH - 36
You can adjust the power of the lamp to save electricity, 
prolong the lamp life and reduce the noise.
 STANDARDWhen higher luminance is required
 ECO-MODEWhen lower luminance is sufficient
You can check how long the lamp has been used.
You can set the off timer to switch off the power of the 
projector after a certain period of time automatically 
when no signal is detected. Press I H to select the 
required period from 15 to 60 minutes at intervals of 
5 minutes.
You...

OPTION menu
ENGLISH - 37
Settings
Select the required screen format by pressing IH.
 16:10When project on a 16:10 or 4:3 
screen.
 16:9When project on a 16:9 screen.
If the input signal contains closed captions, you can turn 
on the feature and switch the channels.
CLOSED CAPTION
 OFFDeactive
 ONActive
MODE
 CC1 - 4Change the channels CC1 - 4
You can select a useful function from the list and assign 
to the FUNCTION button for shortcut. 
1. Press the ENTER button.
2. Press FG to select the required...

Settings
OPTION menu
ENGLISH - 38
JAUDIO BALANCE
You can adjust to hear the sound played equally 
through both right and left external stereo 
speakers, or shift the balance so more sound plays 
through the left or right side.
 IMore sound plays through the left 
side
 HMore sound plays through the right 
side
JINITIALIZE ALL
You can reset all of the customized settings to the 
factory defaults except WIRELESS and LAMP 
RUNTIME menu settings.
1. Press the ENTER button
2. Turn off the projector by...

ENGLISH - 39
Settings
SECURITY menu
JEntering the SECURITY menu
Every time when you apply to the SECURITY 
menu, you will be asked to perform the password 
operation.
QBefore you change the password to 
your original
Perform to input the following factory default 
password operation. 
1. Perform F H G I F H G I.
2. Press the ENTER button.
QAfter you change the password
You can change to your original password in the 
PASSWORD CHANGE menu. 
1. Perform the original password operation.
2. Press the ENTER...

Settings
SECURITY menu
ENGLISH - 40
You can enter your original text up to 22 characters for 
TEXT DISPLAY.1. Use F G I H to specify the location of the 
required character and press the ENTER button. The selected character will be displayed in the TEXT 
CHANGE box.
2. Repeat step 1 until finish your original text.
 To delete all the entered characters, move the cursor 
to ALL DELETE and press the ENTER button.
 To insert a character in the entered text line, move 
the cursor to the text box to select...