Panasonic Projector Pt Lb1ea Specifications

							Superb Basic Performance 
with a 5,000-Hour
*1
 
Lamp Replacement Cycle
Compact, Mobile Projectors
PT- LB2 EA
PT- LB1 EA
LCD Projectors
 PT-LB2   Series
307(
12-3/32 )210(
8-9/32 )80(
3-5/32 )69(
2-23/32 )
Ceiling mount
bracket:
ET-PKB2
Replacement air filter 
for ET-KFB2: 
ET-RFB2
Highly durable 
filter unit:
ET-KFB2
Replacement 
lamp unit:
ET-LAB2
Power supply
Power consumption
Optical system
LCD panel
Lens
Lamp
Screen size (diagonal)
Colour
Brightness
Centre-to-corner uniformity
Contrast
Resolution
Scanning 
frequency
Optical axis shift
Keystone correction range
Installation
Built-in speaker
Terminals
Cabinet material
Dimensions (W x H x D)
Weight
Operation environment
Supplied accessories Panel size
Display method
Drive method
Pixels
RGB
YP
BPR/YCBCR
S-Video/ Video
COMPUTER 1 IN
COMPUTER 2 IN
VIDEO IN
S-VIDEO IN
AUDIO IN
VARIABLE AUDIO OUT
SERIAL
LAN
Project size
(diagonal) [PT-LB2EA] Projection distance (L) [PT-LB1EA] Projection distance (L)
1.1 m (3.7´ )
1.4 m (4.7´ )
1.7 m (5.6´ )2.0 m (6.6´ )
2.3 m (7.6´ ) 2.6 m (8.5´ )
2.9 m (9.5´ )
3.5 m (11.4´ )
4.3 m (14.3´ ) 5.8 m (19.0´ )
7.3 m (23.8´ )
8.7 m (28.6´ ) 1.1 m (3.7´ )
1.4 m (4.5´ )
1.7 m (5.6´ )
2.1 m (6.8´ )
2.4 m (7.9´ )
2.8 m (9.1´ )
3.1 m (10.2´ )
3.5 m (11.4´ )
4.2 m (13.7´ )
5.2 m (17.1´ )
7.0 m (22.9´ )
8.7 m (28.7´ )
10.5 m (34.4´ ) 1.2 m (3.9´ )
1.5 m (4.8´ )
1.8 m (5.8´ )
2.1 m (6.8´ )
2.4 m (7.8´ )
2.7 m (8.8´ )
3.0 m (9.8´ )
3.6 m (11.8´ )
4.5 m (14.8´ )
6.0 m (19.7´ )
7.5 m (24.7´ )
9.0 m (29.6´ ) 1.1 m (3.8´ )
1.4 m (4.6´ )
1.8 m (5.8´ )
2.1 m (6.9´ )
2.5 m (8.1´ )
2.8 m (9.3´ )
3.2 m (10.5´ )
3.5 m (11.6´ )
4.3 m (14.0´ )
5.3 m (17.5´ )
7.1 m (23.4´ )
8.9 m (29.3´ )
10.7 m (35.1´ )
Min (wide)
- Max (telephoto) Min (wide)
-Max (telephoto) Height from the edge 
of screen to 
centre of lens (H)
0.08 m (0.28´ )
0.10 m (0.33´ )
0.13 m (0.42´ )
0.15 m (0.50´ )
0.18 m (0.58´ )
0.20 m (0.67´ )
0.23 m (0.75´ )
0.25 m (0.83´ )
0.30 m (1.00´ )
0.38 m (1.25´ )
0.51 m (1.67´ )
0.64 m (2.08´ )
0.76 m (2.50´ )
0.84 m (33´´ )
1.02 m (40´´ )
1.27 m (50´´ )
1.52 m (60´´ )
1.78 m (70´´ )
2.03 m (80´´ )
2.29 m (90´´ )
2.54 m (100´´ )
3.05 m (120´´ )
3.81 m (150´´ )
5.08 m (200´´ )
6.35 m (250´´ )
7.62 m (300´´ )
480i(525i): fH 15.75 kHz; fV 60 Hz
576i(625i): fH 15.63 kHz; fV 50 Hz 480p(525p): fH 31.50 kHz; fV 60 Hz
576p(625p): fH 31.25 kHz; fV 50 Hz 720p(750p): fH 45.00 kHz; fV 60 Hz
720p(750p): fH 37.50 kHz; fV 50 Hz 1080i(1125i): fH 33.75 kHz; fV 60 Hz
1080i(1125i): fH 28.13 kHz; fV 50 Hz 1080p(1125p): fH 67.50 kHz; fV 60 Hz
1080p(1125p): fH 56.25 kHz; fV 50 Hz
Manual zoom (1:1-1:1.2), manual focus, F 1.64-1.87, f 18.80-22.56 mm
2,600 lumens*2
Manual zoom (1:1-1:1.2), manual focus, F 2.00-2.20, f 19.22-22.68 mm
2,200 lumens*2
100-240 V AC, 50/60 Hz
 300W (0.4 W*1 in eco standby mode. 15 W in normal standby mode. 18 W in normal standb\
y mode when set to audio monitor out and with fan stopped.) Dichroic mirror separation/prism synthesis system16 mm (0.63´´ ) diagonal, 4:3 aspect ratioTransparent LCD panel (x 3, R/G/B) Active matrix
786,432 pixels (1,024 x 768 ) x 3 panels
220 W UHM lamp
0.84-7.62 m (33-300 inches) (4:3 aspect ratio) Full colour (16,777,216 colours)
85%*
2
500:1 (full on/full off)*2
1,024 x 768*3
Horizontal: 15-91 kHz, Vertical: 50-85 Hz
NTSC, NTSC4.43, PAL-M, PAL60: f
H 15.75 kHz; fV 60 Hz
PAL, SECAM, PAL-N: fH 15.63 kHz; fV 50 Hz
5:1 (fixed)
Vertical: ±30°
Front/rear ceiling/desk (menu selection) 4cm-2cm (1-1/16 - 25/32) (oval) x 1
D-sub HD 15-pin x 1 (RGB/YP
BPR/YCBCR x 1)
D-sub HD 15-pin x 1 (RGB/YPBPR/YCBCR x 1)
RCA pin x 1 (Composite video x 1) Mini DIN 4-pin x 1 (S-Video x 1) M3 x 2 (L-R x 2)
M3 x 1 (L-R x 1)
D-sub 9-pin x 1 (RS-232C)
RJ-45 x 1, compatible with PJLink™ (class 1), 100BASE-TX /10BASE-T Moulded plastic (PC+ABS)
307 x 69 x 210 mm (12-3/32 x 2-23/32 x 8-9/32)*
4
Approx. 2.3 kg (5.07 lbs.)*5
Temperature: 0°-40°C (32°-104°F)*6, Humidity: 20%-80% (no condensation)
Power cord, power cord secure lock, wireless remote control, batteries f\
or remote control (R03 type x2), VGA cable, carrying ba g, Application software (CD-ROM)
PT-LB2EA
Models
Specifications (The specifications and design are subject to change without notice as product development proceeds.)
Projection Distance (Screen aspect ratio = 4:3)
unit : mm (inch)
Option Accessories
Dimensions
PT-LB1EA
*1: In eco standby mode, net work functions such as Standby On via L AN are not available, and only cer tain commands can be recei ved from RS-232C control.
*2: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. 
*3: Input signal s that exceed this resolution will be conver ted to 1,024 x 768 pixel s. 
*4: Protruding par ts not included. 
*5: Aver age value (excluding lens cap). May dif fer depending on model s. 
*6: The oper ating temper ature r ange is 0°C (32°F) to 35°C (95°F) when used in High-Altitude mode (1,4 00 to 2,700 m (4,593 to 8, 858 feet)). 
      Al so, in L amp Normal mode, if the ambient temper ature exceeds 35°C /95°F (30°C /85°F in High-Altitude mode), the light output may be reduced approximately 30% to protect the projector.
Upper edge of projected image
Lower edge of projected image Projected image
HL
L
H
JQA-0443
Weights and dimensions shown are approximations. Specifications are subject to change without notice. 
Product availability differs depending on region and country. This product may be subject to export control regulations. 
All trademarks are the property of their respective trademark owners. Projection images simulated.
PT-LB2EA1 Printed in Japan.
All information included here is valid as of July 2010.
http://panasonic.net/avc/projector
For more information about Panasonic projectors 
Panasonics Daylight View Basic technology achieves sharp, 
easy-to-see images by clearly reproducing the details in dark image 
areas, which were previously 
difficult to see in brightly lit 
rooms. A built-in sensor 
measures the ambient light, and 
the Daylight View Basic function 
adjusts the half tone colour and 
brightness level according to the 
surrounding illumination. The compact body is the size of an A 4 file and weighs only about 2.3 
kg, while producing a brightness of 2,600 lm
*7. Its handy size and 
weight make it easy to carr y from room to room, or to a clients office 
for an on-site presentation. It gives you sharp, clear images wherever 
and whenever you need them.
The ecological design of the PT-LB2 series greatly reduces its 
environmental impact. In Eco Standby mode, power consumption is 
only 0.4 W
*8. A s examples of other environmental design features, the 
uncoated cabinet uses no halogenated flame retardants, the lens uses 
lead-free glass, and an Auto Off Timer switches the projector to 
Standby mode when no input signal is received for a preset time. 
The PT-LB2 series also complies with the standards of the RoHS 
Directive
*9.
The noise level is as low as 29-dB
*6. This helps your audience to keep 
their attention on the discussion or on the screen images during quiet 
scenes.
Panasonic employs a number of advanced 
technologies — including a proprietar y lamp 
drive system — that help maintain lamp 
per formance . This has resulted in a 
5,000-hour
*1 lamp replacement cycle. It helps 
saving operating cost by providing longer 
usage bet ween lamp replacements.
2
Portable Convenience and High Basic Performance, 
Including a 5,000-hour
*1 Lamp Replacement Cycle 
and a Resistance to Sudden Voltage Fluctuations
*3
The New Lamp Drive System 
Enables a 5,000-hour
*1 Lamp Replacement Cycle Easy Portability with a Compact, 
A4-File-Size Body
The Daylight View Basic Function
Ensures Clear Images Even in Brightly Lit Rooms
Momentar y power outages*4 or voltage drops*5 
can cause the projector to shut down, 
interrupting the projection. The PT-LB2 series 
equipped with the Intelligent Power 
Management function controls the power 
supply to cope with power fluctuations, to 
enable continued projection.
Intelligent Power Management Function Allows 
Resistance to Sudden Voltage Fluctuations*3
Quiet 29-dB*6 Design Helps to Hold 
Viewers Attention Low Standby Power Consumption of 
0.4 W
*8 Helps the Environment
*1 This value is calculated by continuously turning the lamp on for 2.5 hours and of f for 0.25 hour. 
     The lamp replacement c ycle will decrease if the lamp is turned on/of f more frequently, or if it is lef t on for longer inte
rvals.
*3 Fluctuations may occur in the electricity power supply except the power outage.
*4 Continuing 0V power supply during several tens of milliseconds.
*5 Power supply voltage reduction.  Excluding momentary power outage.
*6 L amp mode : Eco 
*7 For the P T-LB2E A . The P T-LB1E A has a brightness of 2,200 lm.
*8 In Eco Standby mode, net work functions such as Standby On via L AN are not available, and only cer tain commands can be receiv ed from RS-2 32C control.
*9 Restriction of the use of certain Hazardous Substances. The specified toxic substances used in the electrical and electronic  equipment that is manufactured 
     and distributed within Europe are controlled (the six substances are lead, mercur y, cadmium, hexavalent chromium, polybrom inated biphenyls (PBB), 
     and polybrominated diphenyl esters (PBDE)), and all Panasonic projectors comply with the standards of the European RoHS Di rective. *1 With the lamp mode in Eco mode.
2.3 kg (5.07 lbs.)
PT-
LB2 Series
307 mm (12-3/32)
210 mm (8-9/32)
69 mm (2-23/32) 
						

							Balanced Quality and
Performance
1
1
2
2
3
3
4
4
5
5
6789
6789
LANInternetLAN
PT-LB2 Series
4
3
1
A Wired L AN Network Function 
and Other Functions 
Allow Easy System Integration
PT-LB2 EAPT-LB1EA
2600 lm XGA2200 lmXGA
Outstanding Performance and Excellent Mobility
Ideal for a Wide Range of Uses — From Business to Education
The PT-LB2 series offers superb basic performance, such as a 5,000-hour*1 lamp replacement cycle.
Its Intelligent Power Management function allows  resistance to sudden voltage fluctuations.
A network function reduces management tasks with a wired L AN connection, and allows flexible system upgrading. And an easy setup function enables quick operation for por table use.
This kind of versatility brings efficient visual communication to all kinds of applications.
Remote operation using a Web browser
Remote control
PC
PC
PC
PC
PC
E-mail
E-mail
E-mail
Basic concept of the Multi Projector Monitoring 
and Control Software
Auditorium
Lecture room Seminar room
Classroom
LAN
Serial input
Computer 1 input
S-Video input
Audio output
Computer 2 input
Video input
Audio 1 input
Audio 2 input
A Web browser on a computer connected through a wired L AN system 
lets you remotely operate projectors and check their status. An e-mail 
messaging function can also notif y you when a lamp needs 
replacement, and indicate the overall projector status. In addition, 
Multi Projector Monitoring and Control Sof t ware is included for 
monitoring and controlling multiple Panasonic projectors from a 
single PC. The wired L AN terminal is compatible with PJLink™
(Class1), an open protocol that is used by many manufacturers, to 
enable integrated control of systems that contain different brands of 
projectors. The lamp can be accessed through the top panel for easy 
replacement, and the air filter can be removed and installed 
through the side panel. This eliminates the need to detach the 
projector from its ceiling bracket and greatly simplifies 
maintenance. The air filter uses a Micro Cut Filter, which is an 
electrostatic filter that employs an ion effect to attract and trap 
dust particles with high efficiency. You can change the default Panasonic star t up 
logo to any logo you want. A new logo can be 
easily uploaded by connecting a computer to 
the PT-LB2 series through the L AN or serial 
connection by using the Logo Transfer 
Software
*13. An abundance of other securit y 
measures are also included, such as a 
securit y anchor, a user password, a control 
panel lock, and text superimposing.
The Direct Power Off function keeps the 
cooling fan turned on even when you unplug 
the power cord right af ter use. Electric power 
stored inside the unit is used to operate the 
cooling fan to lower the internal temperature. 
This lets you put ever y thing away and carr y 
the projector quickly to your next presentation 
or lecture. 
t wo windows, right and lef t, and display a 
frozen (still) image in one and a real-time 
action image in the other.
 ts of the display up to three 
times their original size.
*14

freezing a motion image.


a solid background colour (settable to either blue or black) is 
displayed on the screen to help prevent connection errors.


A carr ying bag with a handy shoulder strap 
comes with the projector. It also protects the 
projector from impacts.
 t, the image quickly appears
*11 af ter you press the 
power button.

of the projector angle.

senses if you adjust its angle (in the ver tical direction) during 
operation and instantly makes whatever keystone correction is 
necessar y for optimal viewing.

connected and begins projection.
*12

connected by a VGA cable, this function displays the output setting 
method for the PC. The Help screen guides you through the button 
operations according to the maker of the connected PC.

illustrations to show the selected channel and whether the input 
signal is being received or not. It lets you confirm the input conditions 
at a glance, even when multiple devices are connected to the input 
terminals.

convenient when projecting in rooms that 
dont have a screen.
The external E T-KFB2 highly 
durable filter mounts to the 
PT-LB2 series projector to 
boost dust and par ticle 
collection. This optional filter 
is recommended if the 
projector is to be installed in 
a dust y area.
Easy Remote Monitoring and Control Even 
When Mounted on the Ceiling
Various inter faces: Inter faces include t wo computer 
(RGB) inputs, a wired L AN terminal, and a serial 
(RS-232C) terminal for external control. The serial 
terminal has an Emulate function that lets you continue 
using existing control systems when replacing a previous 
Panasonic model. It is also possible to output audio 
during Standby mode. This is convenient when connecting 
an external audio system
*10 through the projector.
The PT-LB2 series has useful features 
such as a wired L AN network.It is a 
mobile projector, but can also be used on 
a desktop or mounted to the ceiling.
Various Interfaces Allow Use with a Wide Range of Systems Top-Panel Lamp Replacement and Side Air Filter 
Replacement Simplify Maintenance 
Even for a Ceiling-Mounted Projector
Optional Highly Durable Filter for Use in Dusty Areas
A 5,000-hour*1 lamp replacement cycle saves 
operating costs. Also, the Intelligent Power 
Management function allows the projector to 
continue operating even when the power 
supply voltage is fluctuated.
Enhanced Basic Performance
Installation Flexibility
Setup is fast and easy thanks to features 
like Speed Star t, which brings up
the image quickly
*2, and simple, single-leg 
adjustment of the projector angle.
Easy Operation
Usability was Also a High Design Priority, 
as Seen in Versatile Functions for Easy Setup.
~ No halogenated flame retardants are used in the cabinet.
~ Non-coated cabinet for easy recycling.
~ Daylight View Basic function makes the screen seem 
   brighter without increasing power consumption.
~ Lead-free glass is used for the lens.
~ Low Standby Power Consumption of 0.4 W.
*15
~An Auto Off Timer switches the projector to Standby mode 
   when no input signal is received for a preset time.
*11 Standby mode : Normal
*12 Searches for approximately 5 minutes af ter the power is turned on.
*13 Uploadable still images are limited to 1024 X 768 pixel bitmap files. Al so, the application will reduce the number of colou rs to 191.
*14 Up to t wo times their original size when using video/S-V ideo signal input.
*15 In Eco Standby mode, net work functions such as Standby On via L AN are not available, and only cer tain commands can be recei ved from RS-2 32C control.
*10 Requires speakers and an audio amplifier.
*1 This value is calculated by continuously turning the lamp on for 2.5 hours and of f for 0.25 hour.  
     The lamp replacement c ycle will decrease if the lamp is turned on/of f more frequently, or if it is lef t on for longer inte
rvals.
*2 Standby mode : Normal
A Variety of Functions Provide Easy Setup
Direct Power Off Function 
- 
Unplug the Power Cord Immediately After Use Other Features
Eco Information Effective Theft Prevention with the Startup Logo
Convenient Carrying Bag
A frozen image A real-time action image Security anchor
The P T-LB2 series projectors are carefully designed by Panasonic 
in Japan to meet demands for high qualit y and per formance.Designed
PT
-
LB2 Series 
						

							Superb Basic Performance 
with a 5,000-Hour
*1
 
Lamp Replacement Cycle
Compact, Mobile Projectors
PT- LB2 EA
PT- LB1 EA
LCD Projectors
 PT-LB2   Series
307(
12-3/32 )210(
8-9/32 )80(
3-5/32 )69(
2-23/32 )
Ceiling mount
bracket:
ET-PKB2
Replacement air filter 
for ET-KFB2: 
ET-RFB2
Highly durable 
filter unit:
ET-KFB2
Replacement 
lamp unit:
ET-LAB2
Power supply
Power consumption
Optical system
LCD panel
Lens
Lamp
Screen size (diagonal)
Colour
Brightness
Centre-to-corner uniformity
Contrast
Resolution
Scanning 
frequency
Optical axis shift
Keystone correction range
Installation
Built-in speaker
Terminals
Cabinet material
Dimensions (W x H x D)
Weight
Operation environment
Supplied accessories Panel size
Display method
Drive method
Pixels
RGB
YP
BPR/YCBCR
S-Video/ Video
COMPUTER 1 IN
COMPUTER 2 IN
VIDEO IN
S-VIDEO IN
AUDIO IN
VARIABLE AUDIO OUT
SERIAL
LAN
Project size
(diagonal) [PT-LB2EA] Projection distance (L) [PT-LB1EA] Projection distance (L)
1.1 m (3.7´ )
1.4 m (4.7´ )
1.7 m (5.6´ )2.0 m (6.6´ )
2.3 m (7.6´ ) 2.6 m (8.5´ )
2.9 m (9.5´ )
3.5 m (11.4´ )
4.3 m (14.3´ ) 5.8 m (19.0´ )
7.3 m (23.8´ )
8.7 m (28.6´ ) 1.1 m (3.7´ )
1.4 m (4.5´ )
1.7 m (5.6´ )
2.1 m (6.8´ )
2.4 m (7.9´ )
2.8 m (9.1´ )
3.1 m (10.2´ )
3.5 m (11.4´ )
4.2 m (13.7´ )
5.2 m (17.1´ )
7.0 m (22.9´ )
8.7 m (28.7´ )
10.5 m (34.4´ ) 1.2 m (3.9´ )
1.5 m (4.8´ )
1.8 m (5.8´ )
2.1 m (6.8´ )
2.4 m (7.8´ )
2.7 m (8.8´ )
3.0 m (9.8´ )
3.6 m (11.8´ )
4.5 m (14.8´ )
6.0 m (19.7´ )
7.5 m (24.7´ )
9.0 m (29.6´ ) 1.1 m (3.8´ )
1.4 m (4.6´ )
1.8 m (5.8´ )
2.1 m (6.9´ )
2.5 m (8.1´ )
2.8 m (9.3´ )
3.2 m (10.5´ )
3.5 m (11.6´ )
4.3 m (14.0´ )
5.3 m (17.5´ )
7.1 m (23.4´ )
8.9 m (29.3´ )
10.7 m (35.1´ )
Min (wide)
- Max (telephoto) Min (wide)
-Max (telephoto) Height from the edge 
of screen to 
centre of lens (H)
0.08 m (0.28´ )
0.10 m (0.33´ )
0.13 m (0.42´ )
0.15 m (0.50´ )
0.18 m (0.58´ )
0.20 m (0.67´ )
0.23 m (0.75´ )
0.25 m (0.83´ )
0.30 m (1.00´ )
0.38 m (1.25´ )
0.51 m (1.67´ )
0.64 m (2.08´ )
0.76 m (2.50´ )
0.84 m (33´´ )
1.02 m (40´´ )
1.27 m (50´´ )
1.52 m (60´´ )
1.78 m (70´´ )
2.03 m (80´´ )
2.29 m (90´´ )
2.54 m (100´´ )
3.05 m (120´´ )
3.81 m (150´´ )
5.08 m (200´´ )
6.35 m (250´´ )
7.62 m (300´´ )
480i(525i): fH 15.75 kHz; fV 60 Hz
576i(625i): fH 15.63 kHz; fV 50 Hz 480p(525p): fH 31.50 kHz; fV 60 Hz
576p(625p): fH 31.25 kHz; fV 50 Hz 720p(750p): fH 45.00 kHz; fV 60 Hz
720p(750p): fH 37.50 kHz; fV 50 Hz 1080i(1125i): fH 33.75 kHz; fV 60 Hz
1080i(1125i): fH 28.13 kHz; fV 50 Hz 1080p(1125p): fH 67.50 kHz; fV 60 Hz
1080p(1125p): fH 56.25 kHz; fV 50 Hz
Manual zoom (1:1-1:1.2), manual focus, F 1.64-1.87, f 18.80-22.56 mm
2,600 lumens*2
Manual zoom (1:1-1:1.2), manual focus, F 2.00-2.20, f 19.22-22.68 mm
2,200 lumens*2
100-240 V AC, 50/60 Hz
 300W (0.4 W*1 in eco standby mode. 15 W in normal standby mode. 18 W in normal standb\
y mode when set to audio monitor out and with fan stopped.) Dichroic mirror separation/prism synthesis system16 mm (0.63´´ ) diagonal, 4:3 aspect ratioTransparent LCD panel (x 3, R/G/B) Active matrix
786,432 pixels (1,024 x 768 ) x 3 panels
220 W UHM lamp
0.84-7.62 m (33-300 inches) (4:3 aspect ratio) Full colour (16,777,216 colours)
85%*
2
500:1 (full on/full off)*2
1,024 x 768*3
Horizontal: 15-91 kHz, Vertical: 50-85 Hz
NTSC, NTSC4.43, PAL-M, PAL60: f
H 15.75 kHz; fV 60 Hz
PAL, SECAM, PAL-N: fH 15.63 kHz; fV 50 Hz
5:1 (fixed)
Vertical: ±30°
Front/rear ceiling/desk (menu selection) 4cm-2cm (1-1/16 - 25/32) (oval) x 1
D-sub HD 15-pin x 1 (RGB/YP
BPR/YCBCR x 1)
D-sub HD 15-pin x 1 (RGB/YPBPR/YCBCR x 1)
RCA pin x 1 (Composite video x 1) Mini DIN 4-pin x 1 (S-Video x 1) M3 x 2 (L-R x 2)
M3 x 1 (L-R x 1)
D-sub 9-pin x 1 (RS-232C)
RJ-45 x 1, compatible with PJLink™ (class 1), 100BASE-TX /10BASE-T Moulded plastic (PC+ABS)
307 x 69 x 210 mm (12-3/32 x 2-23/32 x 8-9/32)*
4
Approx. 2.3 kg (5.07 lbs.)*5
Temperature: 0°-40°C (32°-104°F)*6, Humidity: 20%-80% (no condensation)
Power cord, power cord secure lock, wireless remote control, batteries f\
or remote control (R03 type x2), VGA cable, carrying ba g, Application software (CD-ROM)
PT-LB2EA
Models
Specifications (The specifications and design are subject to change without notice as product development proceeds.)
Projection Distance (Screen aspect ratio = 4:3)
unit : mm (inch)
Option Accessories
Dimensions
PT-LB1EA
*1: In eco standby mode, net work functions such as Standby On via L AN are not available, and only cer tain commands can be recei ved from RS-232C control.
*2: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. 
*3: Input signal s that exceed this resolution will be conver ted to 1,024 x 768 pixel s. 
*4: Protruding par ts not included. 
*5: Aver age value (excluding lens cap). May dif fer depending on model s. 
*6: The oper ating temper ature r ange is 0°C (32°F) to 35°C (95°F) when used in High-Altitude mode (1,4 00 to 2,700 m (4,593 to 8, 858 feet)). 
      Al so, in L amp Normal mode, if the ambient temper ature exceeds 35°C /95°F (30°C /85°F in High-Altitude mode), the light output may be reduced approximately 30% to protect the projector.
Upper edge of projected image
Lower edge of projected image Projected image
HL
L
H
JQA-0443
Weights and dimensions shown are approximations. Specifications are subject to change without notice. 
Product availability differs depending on region and country. This product may be subject to export control regulations. 
All trademarks are the property of their respective trademark owners. Projection images simulated.
PT-LB2EA1 Printed in Japan.
All information included here is valid as of July 2010.
http://panasonic.net/avc/projector
For more information about Panasonic projectors 
Panasonics Daylight View Basic technology achieves sharp, 
easy-to-see images by clearly reproducing the details in dark image 
areas, which were previously 
difficult to see in brightly lit 
rooms. A built-in sensor 
measures the ambient light, and 
the Daylight View Basic function 
adjusts the half tone colour and 
brightness level according to the 
surrounding illumination. The compact body is the size of an A 4 file and weighs only about 2.3 
kg, while producing a brightness of 2,600 lm
*7. Its handy size and 
weight make it easy to carr y from room to room, or to a clients office 
for an on-site presentation. It gives you sharp, clear images wherever 
and whenever you need them.
The ecological design of the PT-LB2 series greatly reduces its 
environmental impact. In Eco Standby mode, power consumption is 
only 0.4 W
*8. A s examples of other environmental design features, the 
uncoated cabinet uses no halogenated flame retardants, the lens uses 
lead-free glass, and an Auto Off Timer switches the projector to 
Standby mode when no input signal is received for a preset time. 
The PT-LB2 series also complies with the standards of the RoHS 
Directive
*9.
The noise level is as low as 29-dB
*6. This helps your audience to keep 
their attention on the discussion or on the screen images during quiet 
scenes.
Panasonic employs a number of advanced 
technologies — including a proprietar y lamp 
drive system — that help maintain lamp 
per formance . This has resulted in a 
5,000-hour
*1 lamp replacement cycle. It helps 
saving operating cost by providing longer 
usage bet ween lamp replacements.
2
Portable Convenience and High Basic Performance, 
Including a 5,000-hour
*1 Lamp Replacement Cycle 
and a Resistance to Sudden Voltage Fluctuations
*3
The New Lamp Drive System 
Enables a 5,000-hour
*1 Lamp Replacement Cycle Easy Portability with a Compact, 
A4-File-Size Body
The Daylight View Basic Function
Ensures Clear Images Even in Brightly Lit Rooms
Momentar y power outages*4 or voltage drops*5 
can cause the projector to shut down, 
interrupting the projection. The PT-LB2 series 
equipped with the Intelligent Power 
Management function controls the power 
supply to cope with power fluctuations, to 
enable continued projection.
Intelligent Power Management Function Allows 
Resistance to Sudden Voltage Fluctuations*3
Quiet 29-dB*6 Design Helps to Hold 
Viewers Attention Low Standby Power Consumption of 
0.4 W
*8 Helps the Environment
*1 This value is calculated by continuously turning the lamp on for 2.5 hours and of f for 0.25 hour. 
     The lamp replacement c ycle will decrease if the lamp is turned on/of f more frequently, or if it is lef t on for longer inte
rvals.
*3 Fluctuations may occur in the electricity power supply except the power outage.
*4 Continuing 0V power supply during several tens of milliseconds.
*5 Power supply voltage reduction.  Excluding momentary power outage.
*6 L amp mode : Eco 
*7 For the P T-LB2E A . The P T-LB1E A has a brightness of 2,200 lm.
*8 In Eco Standby mode, net work functions such as Standby On via L AN are not available, and only cer tain commands can be receiv ed from RS-2 32C control.
*9 Restriction of the use of certain Hazardous Substances. The specified toxic substances used in the electrical and electronic  equipment that is manufactured 
     and distributed within Europe are controlled (the six substances are lead, mercur y, cadmium, hexavalent chromium, polybrom inated biphenyls (PBB), 
     and polybrominated diphenyl esters (PBDE)), and all Panasonic projectors comply with the standards of the European RoHS Di rective. *1 With the lamp mode in Eco mode.
2.3 kg (5.07 lbs.)
PT-
LB2 Series
307 mm (12-3/32)
210 mm (8-9/32)
69 mm (2-23/32) 
						

							Balanced Quality and
Performance
1
1
2
2
3
3
4
4
5
5
6789
6789
LANInternetLAN
PT-LB2 Series
4
3
1
A Wired L AN Network Function 
and Other Functions 
Allow Easy System Integration
PT-LB2 EAPT-LB1EA
2600 lm XGA2200 lmXGA
Outstanding Performance and Excellent Mobility
Ideal for a Wide Range of Uses — From Business to Education
The PT-LB2 series offers superb basic performance, such as a 5,000-hour*1 lamp replacement cycle.
Its Intelligent Power Management function allows  resistance to sudden voltage fluctuations.
A network function reduces management tasks with a wired L AN connection, and allows flexible system upgrading. And an easy setup function enables quick operation for por table use.
This kind of versatility brings efficient visual communication to all kinds of applications.
Remote operation using a Web browser
Remote control
PC
PC
PC
PC
PC
E-mail
E-mail
E-mail
Basic concept of the Multi Projector Monitoring 
and Control Software
Auditorium
Lecture room Seminar room
Classroom
LAN
Serial input
Computer 1 input
S-Video input
Audio output
Computer 2 input
Video input
Audio 1 input
Audio 2 input
A Web browser on a computer connected through a wired L AN system 
lets you remotely operate projectors and check their status. An e-mail 
messaging function can also notif y you when a lamp needs 
replacement, and indicate the overall projector status. In addition, 
Multi Projector Monitoring and Control Sof t ware is included for 
monitoring and controlling multiple Panasonic projectors from a 
single PC. The wired L AN terminal is compatible with PJLink™
(Class1), an open protocol that is used by many manufacturers, to 
enable integrated control of systems that contain different brands of 
projectors. The lamp can be accessed through the top panel for easy 
replacement, and the air filter can be removed and installed 
through the side panel. This eliminates the need to detach the 
projector from its ceiling bracket and greatly simplifies 
maintenance. The air filter uses a Micro Cut Filter, which is an 
electrostatic filter that employs an ion effect to attract and trap 
dust particles with high efficiency. You can change the default Panasonic star t up 
logo to any logo you want. A new logo can be 
easily uploaded by connecting a computer to 
the PT-LB2 series through the L AN or serial 
connection by using the Logo Transfer 
Software
*13. An abundance of other securit y 
measures are also included, such as a 
securit y anchor, a user password, a control 
panel lock, and text superimposing.
The Direct Power Off function keeps the 
cooling fan turned on even when you unplug 
the power cord right af ter use. Electric power 
stored inside the unit is used to operate the 
cooling fan to lower the internal temperature. 
This lets you put ever y thing away and carr y 
the projector quickly to your next presentation 
or lecture. 
t wo windows, right and lef t, and display a 
frozen (still) image in one and a real-time 
action image in the other.
 ts of the display up to three 
times their original size.
*14

freezing a motion image.


a solid background colour (settable to either blue or black) is 
displayed on the screen to help prevent connection errors.


A carr ying bag with a handy shoulder strap 
comes with the projector. It also protects the 
projector from impacts.
 t, the image quickly appears
*11 af ter you press the 
power button.

of the projector angle.

senses if you adjust its angle (in the ver tical direction) during 
operation and instantly makes whatever keystone correction is 
necessar y for optimal viewing.

connected and begins projection.
*12

connected by a VGA cable, this function displays the output setting 
method for the PC. The Help screen guides you through the button 
operations according to the maker of the connected PC.

illustrations to show the selected channel and whether the input 
signal is being received or not. It lets you confirm the input conditions 
at a glance, even when multiple devices are connected to the input 
terminals.

convenient when projecting in rooms that 
dont have a screen.
The external E T-KFB2 highly 
durable filter mounts to the 
PT-LB2 series projector to 
boost dust and par ticle 
collection. This optional filter 
is recommended if the 
projector is to be installed in 
a dust y area.
Easy Remote Monitoring and Control Even 
When Mounted on the Ceiling
Various inter faces: Inter faces include t wo computer 
(RGB) inputs, a wired L AN terminal, and a serial 
(RS-232C) terminal for external control. The serial 
terminal has an Emulate function that lets you continue 
using existing control systems when replacing a previous 
Panasonic model. It is also possible to output audio 
during Standby mode. This is convenient when connecting 
an external audio system
*10 through the projector.
The PT-LB2 series has useful features 
such as a wired L AN network.It is a 
mobile projector, but can also be used on 
a desktop or mounted to the ceiling.
Various Interfaces Allow Use with a Wide Range of Systems Top-Panel Lamp Replacement and Side Air Filter 
Replacement Simplify Maintenance 
Even for a Ceiling-Mounted Projector
Optional Highly Durable Filter for Use in Dusty Areas
A 5,000-hour*1 lamp replacement cycle saves 
operating costs. Also, the Intelligent Power 
Management function allows the projector to 
continue operating even when the power 
supply voltage is fluctuated.
Enhanced Basic Performance
Installation Flexibility
Setup is fast and easy thanks to features 
like Speed Star t, which brings up
the image quickly
*2, and simple, single-leg 
adjustment of the projector angle.
Easy Operation
Usability was Also a High Design Priority, 
as Seen in Versatile Functions for Easy Setup.
~ No halogenated flame retardants are used in the cabinet.
~ Non-coated cabinet for easy recycling.
~ Daylight View Basic function makes the screen seem 
   brighter without increasing power consumption.
~ Lead-free glass is used for the lens.
~ Low Standby Power Consumption of 0.4 W.
*15
~An Auto Off Timer switches the projector to Standby mode 
   when no input signal is received for a preset time.
*11 Standby mode : Normal
*12 Searches for approximately 5 minutes af ter the power is turned on.
*13 Uploadable still images are limited to 1024 X 768 pixel bitmap files. Al so, the application will reduce the number of colou rs to 191.
*14 Up to t wo times their original size when using video/S-V ideo signal input.
*15 In Eco Standby mode, net work functions such as Standby On via L AN are not available, and only cer tain commands can be recei ved from RS-2 32C control.
*10 Requires speakers and an audio amplifier.
*1 This value is calculated by continuously turning the lamp on for 2.5 hours and of f for 0.25 hour.  
     The lamp replacement c ycle will decrease if the lamp is turned on/of f more frequently, or if it is lef t on for longer inte
rvals.
*2 Standby mode : Normal
A Variety of Functions Provide Easy Setup
Direct Power Off Function 
- 
Unplug the Power Cord Immediately After Use Other Features
Eco Information Effective Theft Prevention with the Startup Logo
Convenient Carrying Bag
A frozen image A real-time action image Security anchor
The P T-LB2 series projectors are carefully designed by Panasonic 
in Japan to meet demands for high qualit y and per formance.Designed
PT
-
LB2 Series 
						

							Balanced Quality and
Performance
1
1
2
2
3
3
4
4
5
5
6789
6789
LANInternetLAN
PT-LB2 Series
4
3
1
A Wired L AN Network Function 
and Other Functions 
Allow Easy System Integration
PT-LB2 EAPT-LB1EA
2600 lm XGA2200 lmXGA
Outstanding Performance and Excellent Mobility
Ideal for a Wide Range of Uses — From Business to Education
The PT-LB2 series offers superb basic performance, such as a 5,000-hour*1 lamp replacement cycle.
Its Intelligent Power Management function allows  resistance to sudden voltage fluctuations.
A network function reduces management tasks with a wired L AN connection, and allows flexible system upgrading. And an easy setup function enables quick operation for por table use.
This kind of versatility brings efficient visual communication to all kinds of applications.
Remote operation using a Web browser
Remote control
PC
PC
PC
PC
PC
E-mail
E-mail
E-mail
Basic concept of the Multi Projector Monitoring 
and Control Software
Auditorium
Lecture room Seminar room
Classroom
LAN
Serial input
Computer 1 input
S-Video input
Audio output
Computer 2 input
Video input
Audio 1 input
Audio 2 input
A Web browser on a computer connected through a wired L AN system 
lets you remotely operate projectors and check their status. An e-mail 
messaging function can also notif y you when a lamp needs 
replacement, and indicate the overall projector status. In addition, 
Multi Projector Monitoring and Control Sof t ware is included for 
monitoring and controlling multiple Panasonic projectors from a 
single PC. The wired L AN terminal is compatible with PJLink™
(Class1), an open protocol that is used by many manufacturers, to 
enable integrated control of systems that contain different brands of 
projectors. The lamp can be accessed through the top panel for easy 
replacement, and the air filter can be removed and installed 
through the side panel. This eliminates the need to detach the 
projector from its ceiling bracket and greatly simplifies 
maintenance. The air filter uses a Micro Cut Filter, which is an 
electrostatic filter that employs an ion effect to attract and trap 
dust particles with high efficiency. You can change the default Panasonic star t up 
logo to any logo you want. A new logo can be 
easily uploaded by connecting a computer to 
the PT-LB2 series through the L AN or serial 
connection by using the Logo Transfer 
Software
*13. An abundance of other securit y 
measures are also included, such as a 
securit y anchor, a user password, a control 
panel lock, and text superimposing.
The Direct Power Off function keeps the 
cooling fan turned on even when you unplug 
the power cord right af ter use. Electric power 
stored inside the unit is used to operate the 
cooling fan to lower the internal temperature. 
This lets you put ever y thing away and carr y 
the projector quickly to your next presentation 
or lecture. 
t wo windows, right and lef t, and display a 
frozen (still) image in one and a real-time 
action image in the other.
 ts of the display up to three 
times their original size.
*14

freezing a motion image.


a solid background colour (settable to either blue or black) is 
displayed on the screen to help prevent connection errors.


A carr ying bag with a handy shoulder strap 
comes with the projector. It also protects the 
projector from impacts.
 t, the image quickly appears
*11 af ter you press the 
power button.

of the projector angle.

senses if you adjust its angle (in the ver tical direction) during 
operation and instantly makes whatever keystone correction is 
necessar y for optimal viewing.

connected and begins projection.
*12

connected by a VGA cable, this function displays the output setting 
method for the PC. The Help screen guides you through the button 
operations according to the maker of the connected PC.

illustrations to show the selected channel and whether the input 
signal is being received or not. It lets you confirm the input conditions 
at a glance, even when multiple devices are connected to the input 
terminals.

convenient when projecting in rooms that 
dont have a screen.
The external E T-KFB2 highly 
durable filter mounts to the 
PT-LB2 series projector to 
boost dust and par ticle 
collection. This optional filter 
is recommended if the 
projector is to be installed in 
a dust y area.
Easy Remote Monitoring and Control Even 
When Mounted on the Ceiling
Various inter faces: Inter faces include t wo computer 
(RGB) inputs, a wired L AN terminal, and a serial 
(RS-232C) terminal for external control. The serial 
terminal has an Emulate function that lets you continue 
using existing control systems when replacing a previous 
Panasonic model. It is also possible to output audio 
during Standby mode. This is convenient when connecting 
an external audio system
*10 through the projector.
The PT-LB2 series has useful features 
such as a wired L AN network.It is a 
mobile projector, but can also be used on 
a desktop or mounted to the ceiling.
Various Interfaces Allow Use with a Wide Range of Systems Top-Panel Lamp Replacement and Side Air Filter 
Replacement Simplify Maintenance 
Even for a Ceiling-Mounted Projector
Optional Highly Durable Filter for Use in Dusty Areas
A 5,000-hour*1 lamp replacement cycle saves 
operating costs. Also, the Intelligent Power 
Management function allows the projector to 
continue operating even when the power 
supply voltage is fluctuated.
Enhanced Basic Performance
Installation Flexibility
Setup is fast and easy thanks to features 
like Speed Star t, which brings up
the image quickly
*2, and simple, single-leg 
adjustment of the projector angle.
Easy Operation
Usability was Also a High Design Priority, 
as Seen in Versatile Functions for Easy Setup.
~ No halogenated flame retardants are used in the cabinet.
~ Non-coated cabinet for easy recycling.
~ Daylight View Basic function makes the screen seem 
   brighter without increasing power consumption.
~ Lead-free glass is used for the lens.
~ Low Standby Power Consumption of 0.4 W.
*15
~An Auto Off Timer switches the projector to Standby mode 
   when no input signal is received for a preset time.
*11 Standby mode : Normal
*12 Searches for approximately 5 minutes af ter the power is turned on.
*13 Uploadable still images are limited to 1024 X 768 pixel bitmap files. Al so, the application will reduce the number of colou rs to 191.
*14 Up to t wo times their original size when using video/S-V ideo signal input.
*15 In Eco Standby mode, net work functions such as Standby On via L AN are not available, and only cer tain commands can be recei ved from RS-2 32C control.
*10 Requires speakers and an audio amplifier.
*1 This value is calculated by continuously turning the lamp on for 2.5 hours and of f for 0.25 hour.  
     The lamp replacement c ycle will decrease if the lamp is turned on/of f more frequently, or if it is lef t on for longer inte
rvals.
*2 Standby mode : Normal
A Variety of Functions Provide Easy Setup
Direct Power Off Function 
- 
Unplug the Power Cord Immediately After Use Other Features
Eco Information Effective Theft Prevention with the Startup Logo
Convenient Carrying Bag
A frozen image A real-time action image Security anchor
The P T-LB2 series projectors are carefully designed by Panasonic 
in Japan to meet demands for high qualit y and per formance.Designed
PT
-
LB2 Series 
						

							Superb Basic Performance 
with a 5,000-Hour
*1
 
Lamp Replacement Cycle
Compact, Mobile Projectors
PT- LB2 EA
PT- LB1 EA
LCD Projectors
 PT-LB2   Series
307(
12-3/32 )210(
8-9/32 )80(
3-5/32 )69(
2-23/32 )
Ceiling mount
bracket:
ET-PKB2
Replacement air filter 
for ET-KFB2: 
ET-RFB2
Highly durable 
filter unit:
ET-KFB2
Replacement 
lamp unit:
ET-LAB2
Power supply
Power consumption
Optical system
LCD panel
Lens
Lamp
Screen size (diagonal)
Colour
Brightness
Centre-to-corner uniformity
Contrast
Resolution
Scanning 
frequency
Optical axis shift
Keystone correction range
Installation
Built-in speaker
Terminals
Cabinet material
Dimensions (W x H x D)
Weight
Operation environment
Supplied accessories Panel size
Display method
Drive method
Pixels
RGB
YP
BPR/YCBCR
S-Video/ Video
COMPUTER 1 IN
COMPUTER 2 IN
VIDEO IN
S-VIDEO IN
AUDIO IN
VARIABLE AUDIO OUT
SERIAL
LAN
Project size
(diagonal) [PT-LB2EA] Projection distance (L) [PT-LB1EA] Projection distance (L)
1.1 m (3.7´ )
1.4 m (4.7´ )
1.7 m (5.6´ )2.0 m (6.6´ )
2.3 m (7.6´ ) 2.6 m (8.5´ )
2.9 m (9.5´ )
3.5 m (11.4´ )
4.3 m (14.3´ ) 5.8 m (19.0´ )
7.3 m (23.8´ )
8.7 m (28.6´ ) 1.1 m (3.7´ )
1.4 m (4.5´ )
1.7 m (5.6´ )
2.1 m (6.8´ )
2.4 m (7.9´ )
2.8 m (9.1´ )
3.1 m (10.2´ )
3.5 m (11.4´ )
4.2 m (13.7´ )
5.2 m (17.1´ )
7.0 m (22.9´ )
8.7 m (28.7´ )
10.5 m (34.4´ ) 1.2 m (3.9´ )
1.5 m (4.8´ )
1.8 m (5.8´ )
2.1 m (6.8´ )
2.4 m (7.8´ )
2.7 m (8.8´ )
3.0 m (9.8´ )
3.6 m (11.8´ )
4.5 m (14.8´ )
6.0 m (19.7´ )
7.5 m (24.7´ )
9.0 m (29.6´ ) 1.1 m (3.8´ )
1.4 m (4.6´ )
1.8 m (5.8´ )
2.1 m (6.9´ )
2.5 m (8.1´ )
2.8 m (9.3´ )
3.2 m (10.5´ )
3.5 m (11.6´ )
4.3 m (14.0´ )
5.3 m (17.5´ )
7.1 m (23.4´ )
8.9 m (29.3´ )
10.7 m (35.1´ )
Min (wide)
- Max (telephoto) Min (wide)
-Max (telephoto) Height from the edge 
of screen to 
centre of lens (H)
0.08 m (0.28´ )
0.10 m (0.33´ )
0.13 m (0.42´ )
0.15 m (0.50´ )
0.18 m (0.58´ )
0.20 m (0.67´ )
0.23 m (0.75´ )
0.25 m (0.83´ )
0.30 m (1.00´ )
0.38 m (1.25´ )
0.51 m (1.67´ )
0.64 m (2.08´ )
0.76 m (2.50´ )
0.84 m (33´´ )
1.02 m (40´´ )
1.27 m (50´´ )
1.52 m (60´´ )
1.78 m (70´´ )
2.03 m (80´´ )
2.29 m (90´´ )
2.54 m (100´´ )
3.05 m (120´´ )
3.81 m (150´´ )
5.08 m (200´´ )
6.35 m (250´´ )
7.62 m (300´´ )
480i(525i): fH 15.75 kHz; fV 60 Hz
576i(625i): fH 15.63 kHz; fV 50 Hz 480p(525p): fH 31.50 kHz; fV 60 Hz
576p(625p): fH 31.25 kHz; fV 50 Hz 720p(750p): fH 45.00 kHz; fV 60 Hz
720p(750p): fH 37.50 kHz; fV 50 Hz 1080i(1125i): fH 33.75 kHz; fV 60 Hz
1080i(1125i): fH 28.13 kHz; fV 50 Hz 1080p(1125p): fH 67.50 kHz; fV 60 Hz
1080p(1125p): fH 56.25 kHz; fV 50 Hz
Manual zoom (1:1-1:1.2), manual focus, F 1.64-1.87, f 18.80-22.56 mm
2,600 lumens*2
Manual zoom (1:1-1:1.2), manual focus, F 2.00-2.20, f 19.22-22.68 mm
2,200 lumens*2
100-240 V AC, 50/60 Hz
 300W (0.4 W*1 in eco standby mode. 15 W in normal standby mode. 18 W in normal standb\
y mode when set to audio monitor out and with fan stopped.) Dichroic mirror separation/prism synthesis system16 mm (0.63´´ ) diagonal, 4:3 aspect ratioTransparent LCD panel (x 3, R/G/B) Active matrix
786,432 pixels (1,024 x 768 ) x 3 panels
220 W UHM lamp
0.84-7.62 m (33-300 inches) (4:3 aspect ratio) Full colour (16,777,216 colours)
85%*
2
500:1 (full on/full off)*2
1,024 x 768*3
Horizontal: 15-91 kHz, Vertical: 50-85 Hz
NTSC, NTSC4.43, PAL-M, PAL60: f
H 15.75 kHz; fV 60 Hz
PAL, SECAM, PAL-N: fH 15.63 kHz; fV 50 Hz
5:1 (fixed)
Vertical: ±30°
Front/rear ceiling/desk (menu selection) 4cm-2cm (1-1/16 - 25/32) (oval) x 1
D-sub HD 15-pin x 1 (RGB/YP
BPR/YCBCR x 1)
D-sub HD 15-pin x 1 (RGB/YPBPR/YCBCR x 1)
RCA pin x 1 (Composite video x 1) Mini DIN 4-pin x 1 (S-Video x 1) M3 x 2 (L-R x 2)
M3 x 1 (L-R x 1)
D-sub 9-pin x 1 (RS-232C)
RJ-45 x 1, compatible with PJLink™ (class 1), 100BASE-TX /10BASE-T Moulded plastic (PC+ABS)
307 x 69 x 210 mm (12-3/32 x 2-23/32 x 8-9/32)*
4
Approx. 2.3 kg (5.07 lbs.)*5
Temperature: 0°-40°C (32°-104°F)*6, Humidity: 20%-80% (no condensation)
Power cord, power cord secure lock, wireless remote control, batteries f\
or remote control (R03 type x2), VGA cable, carrying ba g, Application software (CD-ROM)
PT-LB2EA
Models
Specifications (The specifications and design are subject to change without notice as product development proceeds.)
Projection Distance (Screen aspect ratio = 4:3)
unit : mm (inch)
Option Accessories
Dimensions
PT-LB1EA
*1: In eco standby mode, net work functions such as Standby On via L AN are not available, and only cer tain commands can be recei ved from RS-232C control.
*2: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. 
*3: Input signal s that exceed this resolution will be conver ted to 1,024 x 768 pixel s. 
*4: Protruding par ts not included. 
*5: Aver age value (excluding lens cap). May dif fer depending on model s. 
*6: The oper ating temper ature r ange is 0°C (32°F) to 35°C (95°F) when used in High-Altitude mode (1,4 00 to 2,700 m (4,593 to 8, 858 feet)). 
      Al so, in L amp Normal mode, if the ambient temper ature exceeds 35°C /95°F (30°C /85°F in High-Altitude mode), the light output may be reduced approximately 30% to protect the projector.
Upper edge of projected image
Lower edge of projected image Projected image
HL
L
H
JQA-0443
Weights and dimensions shown are approximations. Specifications are subject to change without notice. 
Product availability differs depending on region and country. This product may be subject to export control regulations. 
All trademarks are the property of their respective trademark owners. Projection images simulated.
PT-LB2EA1 Printed in Japan.
All information included here is valid as of July 2010.
http://panasonic.net/avc/projector
For more information about Panasonic projectors 
Panasonics Daylight View Basic technology achieves sharp, 
easy-to-see images by clearly reproducing the details in dark image 
areas, which were previously 
difficult to see in brightly lit 
rooms. A built-in sensor 
measures the ambient light, and 
the Daylight View Basic function 
adjusts the half tone colour and 
brightness level according to the 
surrounding illumination. The compact body is the size of an A 4 file and weighs only about 2.3 
kg, while producing a brightness of 2,600 lm
*7. Its handy size and 
weight make it easy to carr y from room to room, or to a clients office 
for an on-site presentation. It gives you sharp, clear images wherever 
and whenever you need them.
The ecological design of the PT-LB2 series greatly reduces its 
environmental impact. In Eco Standby mode, power consumption is 
only 0.4 W
*8. A s examples of other environmental design features, the 
uncoated cabinet uses no halogenated flame retardants, the lens uses 
lead-free glass, and an Auto Off Timer switches the projector to 
Standby mode when no input signal is received for a preset time. 
The PT-LB2 series also complies with the standards of the RoHS 
Directive
*9.
The noise level is as low as 29-dB
*6. This helps your audience to keep 
their attention on the discussion or on the screen images during quiet 
scenes.
Panasonic employs a number of advanced 
technologies — including a proprietar y lamp 
drive system — that help maintain lamp 
per formance . This has resulted in a 
5,000-hour
*1 lamp replacement cycle. It helps 
saving operating cost by providing longer 
usage bet ween lamp replacements.
2
Portable Convenience and High Basic Performance, 
Including a 5,000-hour
*1 Lamp Replacement Cycle 
and a Resistance to Sudden Voltage Fluctuations
*3
The New Lamp Drive System 
Enables a 5,000-hour
*1 Lamp Replacement Cycle Easy Portability with a Compact, 
A4-File-Size Body
The Daylight View Basic Function
Ensures Clear Images Even in Brightly Lit Rooms
Momentar y power outages*4 or voltage drops*5 
can cause the projector to shut down, 
interrupting the projection. The PT-LB2 series 
equipped with the Intelligent Power 
Management function controls the power 
supply to cope with power fluctuations, to 
enable continued projection.
Intelligent Power Management Function Allows 
Resistance to Sudden Voltage Fluctuations*3
Quiet 29-dB*6 Design Helps to Hold 
Viewers Attention Low Standby Power Consumption of 
0.4 W
*8 Helps the Environment
*1 This value is calculated by continuously turning the lamp on for 2.5 hours and of f for 0.25 hour. 
     The lamp replacement c ycle will decrease if the lamp is turned on/of f more frequently, or if it is lef t on for longer inte
rvals.
*3 Fluctuations may occur in the electricity power supply except the power outage.
*4 Continuing 0V power supply during several tens of milliseconds.
*5 Power supply voltage reduction.  Excluding momentary power outage.
*6 L amp mode : Eco 
*7 For the P T-LB2E A . The P T-LB1E A has a brightness of 2,200 lm.
*8 In Eco Standby mode, net work functions such as Standby On via L AN are not available, and only cer tain commands can be receiv ed from RS-2 32C control.
*9 Restriction of the use of certain Hazardous Substances. The specified toxic substances used in the electrical and electronic  equipment that is manufactured 
     and distributed within Europe are controlled (the six substances are lead, mercur y, cadmium, hexavalent chromium, polybrom inated biphenyls (PBB), 
     and polybrominated diphenyl esters (PBDE)), and all Panasonic projectors comply with the standards of the European RoHS Di rective. *1 With the lamp mode in Eco mode.
2.3 kg (5.07 lbs.)
PT-
LB2 Series
307 mm (12-3/32)
210 mm (8-9/32)
69 mm (2-23/32)