Panasonic Projector Pt L780ntu Operating Instructions

31
Basic Operation
RGBVIDEOAUTO SETUP
ON(G)
STANDBY(R)
ENTER
MENU
POWERSHUTTERINPUTTEMP
LAMP
RGB INPUT
–  FOCUS  +
–
   ZOOM   +
*Press the FOCUS +/- or ZOOM +/- buttons to adjust the
projected image focus and size. 
The projected image focus can
also be adjusted by turning the
focus ring. To make fine
adjustments to the projected
image focus, use the FOCUS +/-
buttons.
Focus
Turning off the power
#Press the POWER button.  “Power
OFF ” is displayed on the screen.
$Select  “OK ” using the  I
I
and  H
H...

32
PICTUREPICTURE M\bDE
C\bL\bR TEMP.
BRIGHT
C\b\fTRAST
SHARP\fESS
WHITE BALA\fCE R
WHITE BALA\fCE G
WHITE BALA\fCE B
STA\fDARDSTA\fDARD
STA\fDARD
32
32 6
32
32
32
SELECT:[^][@]
ADJUST:[{][}] E\fTER:[E\fTER]
  ESC:[ME\fU]
PICTURE menu 
(page 38)
When an RGB/DVI signal is being 
input
On-screen menus
Menu screens
The various settings and adjustments for this projector can be carried o\
ut by
selecting the operations from on-screen menus.
The general arrangement of these menus is shown below.
NOTE:
B...

33
Basic Operation
P\bSITI\b\fP\bSITI\b\f
D\bT CL\bCK
CL\bCK PHASE
KEYST\b\fE
\bSD P\bSITI\b\f
RESIZI\fG
AUT\b SETUP
FRAME L\bCK
STA\fDARDH:   128    V:   32
H:    0    V:    0
32
16
\bFF
\bFF \b\f
\b\f
T\bP LEFT
SELECT:[^][@]
ADJUST:[{][}] E\fTER:[E\fTER]
ESC:[ME\fU]
POSITION menu
 (page  41)
When an RGB/DVI signal is being
input
P\bSITI\b\fP\bSITI\b\f
KEYST\b\fE
\bSD P\bSITI\b\f
ASPECT
RESIZI\fG
AUT\b SETUP
STA\fDARD H:   32    V:   32
H:    0    V:    0
\bFF \b\f
T\bP LEFT
4:3
SELECT:[^][@]...

34
\bPTI\b\fSHUTTER
\bSD
AUT\b KEYST\b\fE
RGB/YPbPr
RGB2 SELECT
BACK C\bL\bR
FR\b\fT/REAR
DESK/CEILI\fG
LAMP P\bWER
LAMP RU\f TIME
\fEXT PAGE @10 H
\bFF
\bFF
RGB
I\fPUT BLUE
FR\b\fT DESKL\bW \b\f
\b\f
YPbPr
\bUTPUT BLACKREAR
CEILI\fG HIGH
SELECT:[^][@]
ADJUST:[{][}] E\fTER:[E\fTER]
ESC:[ME\fU]\bPTI\b\fPREVI\bUS PAGE ^
FA\f C\b\fTR\bL
WEB C\b\fTR\bL
WEB STA\fDBY
WEB PASSW\bRD
C\b\fTR\bL KEY
FU\fC1
SET ID             \T   ALL
AUT\b P\bWER \bFF      D\TISABLESTA\fDARD
\bFF
\bFF
\bFF
MUTE HIGH
\b\f
\b\f...

35
Basic Operation
Menu operation guide
#Press the MENU button.
The menu screen will be
displayed.
$Press the I I
or H H
arrow
buttons to select a menu.
The selected menu screen will
then be displayed.
(Example: POSITION menu)
%Press the ENTER button to
accept the selection.
You can select an item here. The
selected item is shown in yellow.&Select an item pressing the F F
or G G
buttons. 
AFor the value adjusting items
Press the ENTER button to
display an individual adjustment
screen.
Press the Ior...

36
Returning a setting to
the factory default
Select the STANDARD from the
menu screen by pressing the For
Gbuttons and then press the
ENTER button to return all items
displayed on the screen to their
factory default settings. 
B
When a menu screen is being
displayed
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:   128    V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
Using the freeze...

37
Basic Operation
Using the D.ZOOM (digital zoom)
function
This function lets you enlarge the
picture.
#Press a D.ZOOM +/- button
[
The picture will then be enlarged
to 1.5 times the normal size.
$Use the F, G, Iand Hbuttons
to move the enlarged area
which you want to project.&Press the MENU button to
return to the normal screen.
NOTE:
BThis function can only be used
when using the remote control
unit.
BIf the type of signal being input
changes while the digital zoom
function is being used, the digital...

38
Select the item pressing the For G
buttons on the remote control unit or
the projector.
Press the Ior Hbuttons to set the
selective items. For the value
adjusting items, press the ENTER
button to display an individual
screen, and press the Ior H
buttons to adjust the setting.
Adjusting the picture
STANDARD
DYNAMIC
NATURAL
PICTURE MODE
Select the picture mode that best
matches the image source and
room conditions.
The mode best used in dark rooms
is NATURAL. For rooms having
regular lighting conditions...

39
Basic Operation
Color Hue Setting (color
temperature)
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
COLOR
(S-VIDEO/VIDEO/YPBPRonly)
Press the Hbutton to make the
color more vivid in tone, and press
the Ibutton to make the color
more pastel in tone.
TINT
(NTSC/NTSC 4.43/YPBPRonly)
This adjusts the flesh tones in the
picture. Press the Hbutton to make
flesh tones more greenish, and
press the Ibutton to make the
flesh tones more reddish.
BRIGHT
This adjusts the...

40
WHITE BALANCE R/G/B
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colorised. Press the Ibutton to
make the selected color lighter.
Press the  Hbutton to make the
selected color stronger.
Projecting sRGB-
compatible pictures
sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictures to be
reproduced more faithfully, make
the following...