Panasonic Projector Pt L780ntu Operating Instructions

111
Settings of wireless card
q q
Click the icon on the task bar and,
from Menu, open Advanced
Settings.
w w
Enter the name in Profile Name to
preserve the settings.
The initial value is set to  Default .
Only alphanumeric characters and symbols are
acceptable.
e e
If the Communication mode is set to
Infrastructure (Access Point) or to
PEER-TO-PEER:
Set Network name (SSID) to the same setting as
the projector.
If the Communication mode is set to
AdHoc (Pseudo AdHoc):
Set the channel to the same number as...

112
Settings of personal computer
TCP/IP setting
 For WindowsMe
q
q
Right-click the Network Computer
icon and open Properties.
w w
Select TCP/IP -> Panasonic Wireless
Card, and click the Properties
button.
e e
Enter an IP address of the same
segment as the one assigned to the
projector.
r r
Enter the same value as the subnet
mask assigned to the projector.
t t
To communicate in AdHoc mode,
delete the gateway.
To communicate in Infrastructure
mode or PEER-TO-PEER mode, set a
proper gateway.
After the...

 For WindowsXP
q
q
Right-click the My Network icon
and open Properties.
w w
Right-click the My Network icon
and open Panasonic Wireless Card.
e e
Select Internet Protocol (TCP/IP),
and click the Properties button.
r r
Enter an IP address of the same
segment as the one assigned to the
projector.
t t
Enter the same value as the subnet
mask assigned to the projector.
After the entry, click the OK button to return to
the previous screen.
y y
Click the OK button to complete the setting procedure.
You do not...

If two or more network devices are existent
 For WindowsMe
q
q
Right-click the My Computer icon
and click Properties to open the
System Properties window.
w w
Open Device Manager, and select
the icon of the device you want to
disable, and click the Properties
button.
e e
Check the Disable in this hardware
profile checkbox and click the OK
button.
r r
Confirming that each icon of the
disabled adaptors is marked with X,
click the OK button to close the
window.
 For Windows98SE•To install the driver in a...

115
 For WindowsXP
q
q
Right-click the My Network Places
icon and select Properties, and
open the Network connection
window.
w w
Right-click the icon of the device you
want to disable and select Disable.
e e
Making sure the icon of the device
you just disabled is gray, close the
window.
 For Windows2000•To install the driver for Windows2000, refer to the procedure for WindowsXP.     

116
Web browser control
What you can do with Web browser
control
With the web browser, the user can access the projector for set-up using the projector
control and handle the SD card data loaded in the projector using the SD control.
Settings of Web browser control
Settings of projector
q q
Press the MENU button to display the menu.
w w
Use the  and  buttons to display the
Option screen.
e e
Press the ENTER button to display the
Option  set-up screen. 
Settings can be altered with  ,  ,  and 
buttons....

117
Note:•For Netscape, go to  “Edit ” → “Setting ” → “Details ” and enable JavaScript.
Operation of Web browser control
Starting Web browser control
Start the browser (Microsoft Internet Explorer is used as an
example here), and enter the IP address assigned to the
projector.
Web browser control will be started.
Note:• Web browser control can also be started from Wireless Manager 2.0.
While Wireless Manager 2.0 is running, right-click the icon shown on the\
 task bar,
select and left-click  Remote...

118
Projector control 
Click Projector control in the menu.The user can make various settings of the projector.
Basic control screen 
Notes:•When the power is turned ON, the
window is closed for the moment. Then,
confirming that the light is turned on, start
operation again from the top screen.
•Connection with the projector cannot be
established just after turning on the
power. In this case, wait for a while and
try connection again.
•
If Web control is not turned ON in the
option setting of the...

119
SD control 
q q
Switch to SD CARD by using the input selector (RGB)
button of the projector or the remote control.
It is also possible to switch to it on the basic control screen of the projector
control.
w w
Click SD control in the menu.
SD file list screen 
SD thumbnail screen 
Presentation screen
Select a folder in the SD card.
Select from display of thumbnail, display 
of file name list and presentation.
Control auto-play. 
Clicking a file name will zoom in on it 
within the Web browser.
Clicking...

120
When using PDA
From a personal digital assistance (PDA) and other portable information terminal, the
user can access this projector to make setting on the projector and to operate data of
the SD card.
For details of PDA and for setting of PDA network cad, refer to manufacturer’s
instruction manual for those devices.
Operation of PDA
Top screen Starting the Web browser control (PDA)
Start the browsing software and enter the following address:http://(the IP address set by the projector)/index_p.htm...