Panasonic Projector Pt F200NT Operating Instructions

< 1 >
SPECFILE
Product Number :  PT-F200NT
Product Name : LCD Projector
As of January 2008. Appearance and specifications are subject to change without notice. 

SPECFILE
PT-F200NTLCD Projector
As of January 2008< 2 >
Specifications
Power supply
Power consumption
Optical system
LCD panel  Panel size
Display method
Drive method
Pixels
Pixel configuration
Lens
Lamp
Colors
Brightness *
1
Center-to-corner uniformity *1
Contrast ratio *1
Resolution RGB
Scanning frequency RGB YP
BPR
S-Video/Video
Projection size
Throw distance
Optical axis shift
Keystone correction range
Installation
On-screen menu
Built-in speakers Size Output power
Terminals COMPUTER 1 IN
COMPUTER 2...

SPECFILE
PT-F200NTLCD Projector
As of January 2008< 3 >
Remote control unit Power supply
Operation range*
2
Dimensions (W x H x D)
Weight
Wireless LAN  Standard ModulationIEEE 802.11b
IEEE 802.11g
Transmission system IEEE 802.11b
IEEE 802.11g
Transmission speed IEEE 802.11b
IEEE 802.11g
Operating range*
2
Frequency range
Channels
Infrastructure mode
Ad-hoc mode
Wireless Manager ME 4.5 system requirements
OS
Web browser
CPU
Memory
Free hard disk space
CD-ROM drive
Wireless LAN
Wired LAN connector
Supplied...

SPECFILE
PT-F200NTLCD Projector
As of January 2008< 4 >
Dimensions
319
53
213
432
115
9.5 124.5
309
70
85
(12-9/16˝)
(2-3/32˝)
(8-3/8˝)
(17˝)
(4-17/32˝)
(3/8˝) (4-29/32˝)
(12-5/32˝)
(2-3/4˝)
(3-11/32˝)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Terminals
1 LAN
2 Computer 1 input
3 Computer 2 input/computer 1 output
4 S-Video input
5 Video input
6 Component input
7 Audio input for component/S-Video/video
8 Serial input
9 Remote input
10 Audio input for computer 1
11 Audio input for...

SPECFILE
PT-F200NTLCD Projector
As of January 2008< 5 >
Standard setting-up positions
Projection distance (screen aspect ratio 4:3)
Projected image
Lower edge of projected image
Upper edge of projected image
L
L L
Projected image
H
H
70 (2-3/4˝)
65
369–449
(14-17/32˝– 17-11/16˝)
Adjus table 
in 20-mm
(15/32-inch)  step
 13 (1/2˝)
195
Ø43 Ø49
(7-11/16˝)
(1-11/16˝)
(1-15/16˝)
unit : mm (inch)
A: Distance to screen
E: Height from the edge of screen to
center of lens
NOTE:
Illustrations show the projector...

SPECFILE
PT-F200NTLCD Projector
As of January 2008< 6 >
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
H(Width of
projected image)
V
(Height of
projected image)
0.5V 0.5V
0.32H
0.32H
Standard pos tition 
of projected image
Installable Angle
Install the projector at an angle within the range shown below..
• Vertical direction
The projector may be installed at a vertical angle of ±30°.
• Horizontal direction
The projector may not be angled...

SPECFILE
PT-F200NTLCD Projector
As of January 2008< 7 >
Computer data compatibility
This projector accepts up to 91 kHz horizontal scanning frequency and 162 MHz dot clock.
NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 110 MHz. The display resolution of this projector is 1,024
x 768 pixels. If the display resolution indicated in the above data exceeds this resolution, image compression will be used to c on-
vert the input signal to 1,024 x 768 pixels.
List of compatible...

SPECFILE
PT-F200NTLCD Projector
As of January 2008< 8 >
STXETX
C1 C2 C3 : P1 P2 P3 P4
Start
(1 byte) End
(1 byte)
Colon
(1 byte) Parameter
(1-4 bytes)
Command
(3 bytes)
(Control and/or query commands)
Serial connector
The serial connector complies with RS-232C. To control the projector from a personal computer, com-
mands must be input through communication software, based on the format and satisfying the commu-
nication conditions shown below.
Pin assignments and signal names
Communication conditions...

SPECFILE
PT-F200NTLCD Projector
As of January 2008< 9 >
Control commands
*1
Do not s end PON, POF, or OS H commands continuously in a short period of time. Doing s o may burst the lamp or s horten the lamp replacement cycle.
*2
When a command other than O SH is  s ent while the s hutter function is  operating, the projector will s end an ER401 command in reply and releas e the shutter function.
PON*1
POF*1
AVL:
IIS:
OST
OFZ:
OEN
OXG:
VPM:
VPM:
VPM:
VPM:
VXX:DLVI0=
VXX:DLVI0=
VXX:DLVI0=
AUU
AUD
OMN
OCU...

SPECFILE
PT-F200NTLCD Projector
As of January 2008< 10 >
Parameter format
Parameter formatSize (Byte)Difinition










 3 (1 or 2 bytes also 
possible when 
under control)
1
3
1
3
3
1
4
1
8
6Dicimal without s
igns: 0-999 (000, 001, 002...999)
Dicimal with s igns: -99 to +99 (-99...-01, +00, +01, +02...+99)
 Callback  from the projector is  3 Byte.
0 = off, 1 = on
R G 1 = computer 1, RG 2 = computer 2, NWP = network ,
YUV = component, VID = video, S VD = S-Video
0 = front, 1 = rear, 2 = ceiling and...