Panasonic Projector Pt F100ntea Specifications

							
Long-Lasting Brightness
PT- F10 0NT EA
PT- F10 0 EA
LCD Projectors 
						

							
With their outstanding flexibility,
PT-F100 series projectors make
ideal replacements for existing 
ceiling-mounted systems. They
require little maintenance after
installation, so total cost of 
ownership is low.
A Bright Choice for 
New Installations and
Replacement Use
Advanced Technologies that Maintain High
Brightness Over a Longer Service Life
Auto Rolling Filter (ARF) and Anti-Dust Design
A Micro Cut Filter, a high-efficiency electro-
static filter, with superior dust-collecting per-
formance combines with Panasonic’s original
Auto Rolling Filter and anti-dust design to minimise brightness
loss due to dust accumulation. The Auto Rolling Filter periodi-
cally winds the used section into the casing so that a fresh
section of filter is exposed. Thus, peak performance is main-
tained. In developing the anti-dust design, Panasonic totally re-
engineered the airflow path, from intake to exhaust, to create a
cabinet that hermetically seals off the projector interior. This
design and the Auto Rolling Filter team up to keep the air
inside the projector dust-free at all times.

ARF unitARF unit
Micro Cut Filter
A high-efficiency electrostatic filter in the air intake section
traps dust particles that are 1 microns* or larger. By cap-
turing approximately 7 times as much dust as our previous
filters, it guards against optical blocks and reduces the
penetration of dust into the interior to provide stable oper-
ation by preventing drops in brightness.

100
Dus t
Dead
mite Pollen
Mould
Bacteria
Virus
u p  t o  0.25 µm
(micrometer)
2.5– 20 µm
25– 50 µm
10
1
0.5
0.05
0.01
Size of particles
1 
						

							
The projector can also be set on
a shelf at the back of the room,
greatly simplifying installation.
Thanks to the wireless LAN
function, you can set up a sys-
tem using multiple PCs quickly
and easily.The PT-F100NTEA and PT-F100EA are
high-performance LCD projectors designed
for use in fixed installations. Each model
combines Panasonic’s original Auto Rolling
Filter with a new lamp drive system to
deliver crisp, bright images over extended
periods of time. Each also offers outstand-
ing installation flexibility, with 2x zoom
lens, lens shift and wireless/wired LAN*
functions that accommodate everything
from permanent ceiling-mounted use to
simple placement on a shelf. Whether
you’re looking to install a new system or
considering a replacement, Panasonic
answers the call for projectors that pro-
vide long-lasting brightness, simple main-
tenance, and easy, casual use even in
fixed installations.
* The PT-F100NTEA only.

4 
						

							
New Drive System for Optimal Lamp Performance
Lamps used in a projector require much higher precision than
ordinary household lamps. Panasonic employs a number of new
technologies—including a new drive system—that help main-
tain optimal lamp performance for longer-lasting brightness.
Daylight View 3 Technology: Enhanced Perception of
Brightness and Contrast*
The PT-F100 series feature Panasonic’s
Daylight View 3 technology, which uses
an adaptive low-pass filter to
optimise the dark parts of the
image. This makes images seem
brighter and higher in contrast,
so they appear crisp, vivid and
easy to see even in brightly lit
rooms. Daylight View 3 also
includes a built-in ambient light
sensor that automatically detects
room brightness and adjusts
operation accordingly.
* There is no actual change in the rated brightness or contrast ratio.
Convenient features for fixed installation
Wide 2x Zoom and Horizontal/Vertical Lens Shift Give
You More Installation Flexibility
Each can project a 120-inch image from any distance between
3.6 m (11.8 feet) and 7.2 m (23.6 feet). In new installations,
this lets you accommodate a wide range of room sizes and shapes. And when replacing existing projectors, the new 2x
zoom greatly expands your installation flexibility.
Wired LAN: Web Browser Control/Monitoring, E-Mail
Message Alert (PT-F100NTEA)
Anybody can operate the PT-F100NTEA by remote control or
monitor its status over a LAN network, because it is all done
using the computer’s familiar web browser. Furthermore, the
projector sends an e-mail message to notify the operator when
an error has occurred, or a lamp needs to be replaced.
PJLink
™compatibility (PT-F100NTEA)
The LAN terminals support
PJLink
™class 1 connection.
Control with the same specifica-
tions is also possible when used
in a multi-projector system with
projectors of another brand.
Direct Power Off
Because the cooling fan keeps operating until the lamp is
cooled, you can turn off the room’s main power without waiting
for the projector to cool down.
Easy Lamp Replacement from the Rear
For easier maintenance, you can replace the
lamp from the rear. The lamp is easily
replaced even after the projector is installed
on the ceiling.

Simulated image with Daylight View 3
turned on. The brightness and contrast
over the entire image appear to be
enhanced, and details in shadow areas
are reproduced clearly. Simulated image with Daylight View 3
turned off. Overall contrast appears lower,
and images in dark areas are blackened.

Internet
LAN LAN
PC
PC
PC
PC PC
PT-F100NTEA Remote Control
e-mail
e-mail
e-mail
LAN
PC P
C
P C
C
ompany  C
controller C
ompany A
projector C
ompany B
projector
PT-F100NTEA
7.2 m/23.6 feet
120-inch screen
3.6 m/11.8 feet
Ambient light 
sensor (ALS)
Daylight View 3 Concept
Daylight View 
circuit
LCD panels
Projector
2 
						

							
Abundant connection terminals
Designed for versatility, each projector comes equipped with a
host of connection terminals. The RS232C specifications are
the same as in previous Panasonic models, so replacement is
quick and easy.
Easy-to-Use Remote Control with Laser Pointer
The supplied remote control features
a number of wireless projection con-
trols, including Microsoft
®PowerPoint®
page up/down capability. The control
range and distance have been extend-
ed, and the buttons are now larger
and easier to use.
Wireless Functions Add Versatility(PT-F100NTEA)
Easy Wireless Projection from Multiple PCs
With the PT-F100NTEA’s wireless capability, you don’t need
cables to connect a PC. That means it’s easy to bring in a lap- top (with a wireless LAN function) and deliver a smooth, has-
sle-free presentation. You can make the settings for wireless
connection quickly and easily using Wireless Manager ME 4.0
software. When the presentation is finished, Wireless Manager
restores the PC to its previous
LAN settings, so the PC is ready
to reconnect to your LAN.
Functions include Live mode and
Multi-Live mode. In Live mode,
the image projected is identical to
the image seen on the PC screen.
In Multi-Live mode, you can wire-
lessly connect with multiple PCs.
Other Valuable Features
• Anti-theft features: Security anchor,
user password, control panel lock and
text superimposing  
• HDTV compatibility  
• Full compatibility with sRGB colour space for accurate colour reproduction
(in natural mode)  
• Picture mode selection (standard/dynamic/natural)  
• Blackboard mode allows you to project images onto an ordi- nary classroom or conference room blackboard  
• Shutter function for image/sound muting 
• Selectable 17-language onscreen menu

Virtual Remote
Control
The same graphics
used on the pro-
jectors remote
control can be dis-
played on the PC
screen. This makes
it easy to operate
the projector right from the PC, with-
out having to use the remote control.

The front panel covers the lens to keep it clean from dust, and conceals the controls to
prevent accidental misoperation. It can be opened for easy access to controls even after
the projector is installed on the ceiling.

Equipped with
two transmit-
ters for an
extended
remote control
range.
Security anchor

3
Wireless Manager Control Panel (Launcher) 
To begin wireless projection, simply use the control
panel (launcher) displayed in the PC window.

Four-window style Index style(Four thumbnails) Extended index style
(16 thumbnails)
A Wide Variety of Wireless Functions
The PT-F100NTEA provides a host of convenient wireless functions, including Wireless
Prompter (Secondary Display Transmission), selective area transmission and a 16-window
index style that lets you project images from up to 16 PCs at the same t\
ime. Wireless
transmission is possible from one PC to a maximum of eight projectors at\
 a time.
The PT-F100NTEA features a LAN connector terminal.
PT-F100NTEA PT-F100EA 
						

							
Replacement lamp unit
ET-LAF100Replacement filter unit
ET-RFF100
Specifications
Power supply
Power consumption
LCD panel
Panel size
Display method
Drive method
Pixels
Pixel configuration
Lens
Lamp
Projection size
colours
Brightness
Centre-to-corner uniformity
Contrast ratio
Resolution (RGB) *
1
Scanning frequency 
RGB
YP
BPR
S-Video/Video 
Optical axis shift *
2
Keystone correction range
On-screen menu 100–240 V AC, 50/60 Hz
330 W (Approx. 3.5 W in standby
mode with fan stopped)
0.7 (17.78 mm) diagonal 
(4:3 aspect ratio)
Transparent LCD panel (x 3, R/G/B)
Active matrix
786,432 (1,024 x 768) x 3,
total of 2,359,296 pixels
Stripe
Manual zoom (1:1–1:2), manual
focus, F 1.7– 2.6, f 21.6– 43.0 mm 
250 W UHM™ lamp 
33 – 300 inches/838 –7,620 mm 
diagonally (16:10 aspect ratio)
Full colour (16,777,216 colours)
3,200 lumens
80%
400:1 (full on/full off)
1,024 x 768 pixels
Horizontal: 15 – 91 kHz,
Vertical: 50 – 85 Hz
480i (525i): f
H15.75 kHz; fV60 Hz
576i (625i): fH15.63 kHz; fV50 Hz
480p (525p): fH31.50 kHz; fV60 Hz
576p (625p): fH31.25 kHz; fV50 Hz
720/60p (750/60p): f
H45.00 kHz; fV60 Hz
720/50p (750/50p): f
H37.50 kHz; fV50 Hz
1080/60i(1125/60i): f
H33.75 kHz; fV60 Hz
1080/50i(1125/50i): f
H28.13 kHz; fV50Hz
NTSC, NTSC4.43, PAL-M, PAL60: f
H15.75 kHz; fV60 Hz 
PAL, SECAM, PAL-N: f
H15.63 kHz; fV50 Hz 
Vertical: ±50%, horizontal: ±32%
Vertical: ±30°
17 languages: English, French,
German, Spanish, Italian, Korean,
Russian, Chinese, Japanese,
Swedish, Norwegian, Danish,
Portuguese, Polish, Hungarian,
Czech, and Thai Front/rear ceiling/desk 
(menu selection)
4 cm (round), x 1,
3.0 W (monaural) output power
D-sub HD 15-pin x 1
D-sub HD 15-pin x 1 (input/output
selectable using on-screen menu)
RCA pin x 3
RCA pin x 1
Mini DIN 4-pin x 1
M3 (stereo) x 1
M3 (stereo) x 1
RCA pin (L, R) x 1
M3 (stereo) x 1 (variable)
D-sub 9-pin x 1 (RS-232C)
D-sub 9-pin x 1
RJ-45 x 1,
10BASE-T/100BASE-TX/1000BASE-T
2 m (6´7) 
Moulded plastic (PC+ABS)
432 x 124.5 x 319 mm
(17 x 4-29/32 x 12-9/16)
6.2 kg (13.7 lbs.)
0°–40°C (32°–104°F)
20%–80% (no condensation)
IEEE802.11b/g
Approx. 30 m (98´5)
3 V DC (AA battery x 2)
Approx. 15 m (49´3) when operated
from directly in front of the signal
receptor
48 x 163 x 24.5 mm
(1-7/8 x 6-13/32 x 31/32)
117 g (4.1 oz) (including batteries)
Installation
Built-in speakers
Terminals
COMPUTER 1 IN
COMPUTER 2 IN/COMPUTER 1 OUT
COMPONENT IN
VIDEO IN 
S-VIDEO IN 
AUDIO IN (COMPUTER 1) 
AUDIO IN (COMPUTER 2)
AUDIO IN (COMPONENT/VIDEO/S-VIDEO)
AUDIO OUT
SERIAL
REMOTE
LAN
Power cord length
Cabinet material
Dimensions (W x H x D)
Weight
Operating environment Temperature
Humidity
Wireless LAN (PT-F100NTEA) Standard
Operation range *
3
Wireless Remote Control Unit
Power supply
Operation range *
3
Dimensions (W x H x D)
Weight Supplied Accessories
 Power cord
 Wireless remote control
 Batteries for remote control
 Safety wire rope
 Wireless Manager ME 4.0 (CD-ROM)*
* For the PT-F100NTEA only
Optional AccessoriesET-LAF100  Replacement lamp unit
ET-RFF100 Replacement filter unit
ET-PKF100H  Ceiling mount bracket for high ceilings
ET-PKF100S  Ceiling mount bracket for low ceilings
N
OTES ON USE
 The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or
extended use. The length of time that it takes for the lamp to break or fail to illuminate
varies greatly depending on individual lamp characteristics and usage conditions.
 The brightness of the lamp will gradually decrease with use.
 The projector includes consumable parts. The frequency of replacement for the lamp and other consumable parts will increase if the projector is subjected t\
o extended, con-
tinuous use. For details, please consult a service representative.
To use network functions, a PC is required that meets the conditions given below:
OS: Microsoft® Windows® 2000 Professional, Windows® XP Professional, Windows® XP Home Edition, Windows® Vista™
NOTE: Some functions are not available with Windows® Vista™.Web browser: Internet Explorer 6.0 or later, or Netscape Communicator 7.0 or later
CPU: Intel® Pentium® III or higher, or other compatible processor (1 GHz orhigher is recommended).
Memory: 256 MB or more
Free hard disk space: 60 MB or more
CD-ROM drive: CD-ROM drive or DVD drive
Wireless LAN: IEEE 802.11b/g compatible (built-in wireless LAN system or external IEEE 802.11b/g LAN card must be installed and running normally.) 
NOTE: Some IEEE 802.11g/b wireless LAN may not allow connection to the project\
or.Wired LAN connector: RJ-45NOTE:  Use Category 5e (or higher) cables for 1000BASE-T connection.
Visit the Projectors Global Web Site shown below for the latest information.

Projectors Global Web Site
http://panasonic.co.jp/pavc/global/projector
Weights and dimensions shown are approximate. Specifications are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export
control regulations. UHM is a trademark of Matsushita Electric Industrial Co., Ltd. Intel and Pentium
are registered trademarks of Intel Corporation. Windows is either a registered trademark or trademark
of Microsoft Corporation in the United States and/or other countries. All other trademarks are the
property of their respective trademark owners. Projection images simulated.
PT-F100NTEA1-07MAR50K Printed in Japan.

Ceiling mount bracket for
high ceilings
ET-PKF100H

Ceiling mount bracket
for low ceilings
ET-PKF100S

*1: Input signals that exceed this resolution will be converted to 1,024
x 768 pixels. *2: Shift range is limited during simultaneous horizontal
and vertical shifting. *3: Operation range differs depending on the
environment.

319
53
213
432
115
9.5 124.5
309
70
85
12-9/16˝
2-2/32˝
8-3/8˝
17˝
4-17/32˝
3/8˝ 4-29/32˝
12-5/32˝
2-3/4˝
3-11/32˝
Dimensions
Projection Distance (4:3)unit: mm/inchProject 
size
(diagonal) Height from the edge of 
screen
to centre of len s (H)
Min (wide) Projection di
stance (L)
Max (telephoto)
/
/
/
/
/
/
/
/
/ /
/
/
/
/
/
/
/
//
/
/
/
/
/
/
/
/ /
/
/
/
/
/
/
/
/
0.84 m
1.02 m
1.52 m
2.03 m
2.54 m
3.05 m
3.81 m
5.08 m
7.
62 m –
1.2 m
1.8 m
2.4 m
3.0 m
3. 6 m
4.5 m
6 .0 m
9 .1 m 1.
9 m
2.4 m
3. 6 m
4.8 m
6 .0 m
7.2 m
9 .0 m
12.1 m
18.1 m 0.25 m
0.30 m
0.4
6 m
0. 61 m
0.7 6 m
0. 91 m
1.14 m
1.52 m
2.2 9 m
0 –
0 –
0 –
0 –
0 –
0 –
0 –
0 –
0 –
33
40
6
0
80
100
120
150
200
300 –
3.8´
5.8´
7.8´
9 .8´
11.8´
14.8´
1 9.8´
2 9.8´ 6
.4´
7.8´
11.7´
15.7´
1 9.7´
23.7´
2 9.6 ´
3 9.6 ´
5 9.5´ 0 –
0 –
0 –
0 –
0 –
0 –
0 –
0 –
0 –0.8´
1.0´
1.5´
2.0´
2.5´
3.0´
3.7´
5.0´
7.5´