Panasonic Projector PT-EW650 User Manual
Here you can view all the pages of manual Panasonic Projector PT-EW650 User Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 101
f The
[SCHEDULE] screen is displayed.
3) Press as to select [PROGRAM EDIT].
4) Press qw to select a program number, and press the button.
5) Press as to select a command number, and press the button.
6) Press asqw to select [TIME], and press the button.
f The projector is in the adjustment mode (where the time is blinking).
7) Press qw to select “hour” or “minute”, and press as to set a time, and then press the
button.
8) Press...](http://img.usermanuals.tech/thumb/58/100226/w300_projector_manual_9469_d-100.png "Page 101
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 101
f The
[SCHEDULE] screen is displayed.
3) Press as to select [PROGRAM EDIT].
4) Press qw to select a program number, and press the button.
5) Press as to select a command number, and press the button.
6) Press asqw to select [TIME], and press the button.
f The projector is in the adjustment mode (where the time is blinking).
7) Press qw to select “hour” or “minute”, and press as to set a time, and then press the
button.
8) Press...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 101 f The [SCHEDULE] screen is displayed. 3) Press as to select [PROGRAM EDIT]. 4) Press qw to select a program number, and press the button. 5) Press as to select a command number, and press the button. 6) Press asqw to select [TIME], and press the button. f The projector is in the adjustment mode (where the time is blinking). 7) Press qw to select “hour” or “minute”, and press as to set a time, and then press the button. 8) Press...
Page 102
![Page 102
Chapter 4 Settings — [PROJECTOR SETUP] menu
102 - ENGLISH
f If an operation is executed with the remote control or the control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with the schedule function may not be executed.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector
.
Setting the time zone
1) Press as to select [DATE AND TIME].
2) Press the button.
f The
[DATE AND TIME] screen is...](http://img.usermanuals.tech/thumb/58/100226/w300_projector_manual_9469_d-101.png "Page 102
Chapter 4 Settings — [PROJECTOR SETUP] menu
102 - ENGLISH
f If an operation is executed with the remote control or the control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with the schedule function may not be executed.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector
.
Setting the time zone
1) Press as to select [DATE AND TIME].
2) Press the button.
f The
[DATE AND TIME] screen is...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 102 - ENGLISH f If an operation is executed with the remote control or the control panel of the projector or with a control command before the command set in [SCHEDULE] is executed, the command set with the schedule function may not be executed. [DATE AND TIME] Set the time zone, date, and time of the built-in clock of the projector . Setting the time zone 1) Press as to select [DATE AND TIME]. 2) Press the button. f The [DATE AND TIME] screen is...
Page 103
![Page 103
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 103
2)
Press the button.
f The confirmation screen is displayed.
3) Press qw to select [OK], and press the button.
f To cancel, select [CANCEL].
f The lens moves up, down, left, and right to automatically detect the lens shift limit value, and automatically
set the home position.
f The lens stops to complete the calibration.
Note
f [NOW CALIBRATING...] is displayed during lens calibration. Cannot cancel mid-operation.
f When lens...](http://img.usermanuals.tech/thumb/58/100226/w300_projector_manual_9469_d-102.png "Page 103
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 103
2)
Press the button.
f The confirmation screen is displayed.
3) Press qw to select [OK], and press the button.
f To cancel, select [CANCEL].
f The lens moves up, down, left, and right to automatically detect the lens shift limit value, and automatically
set the home position.
f The lens stops to complete the calibration.
Note
f [NOW CALIBRATING...] is displayed during lens calibration. Cannot cancel mid-operation.
f When lens...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 103 2) Press the button. f The confirmation screen is displayed. 3) Press qw to select [OK], and press the button. f To cancel, select [CANCEL]. f The lens moves up, down, left, and right to automatically detect the lens shift limit value, and automatically set the home position. f The lens stops to complete the calibration. Note f [NOW CALIBRATING...] is displayed during lens calibration. Cannot cancel mid-operation. f When lens...
Page 104
![Page 104
Chapter 4 Settings — [SECURITY] menu
104 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-menu.
Refer to “Navigating through the menu” (
x page 62) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press
awsqawsq in order, and press the button.
Attention
f When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password and...](http://img.usermanuals.tech/thumb/58/100226/w300_projector_manual_9469_d-103.png "Page 104
Chapter 4 Settings — [SECURITY] menu
104 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-menu.
Refer to “Navigating through the menu” (
x page 62) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press
awsqawsq in order, and press the button.
Attention
f When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password and...")
Chapter 4 Settings — [SECURITY] menu 104 - ENGLISH [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select an \ item from the sub-menu. Refer to “Navigating through the menu” ( x page 62) for the operation of the menu screen. f When the projector is used for the first time Initial password: Press awsqawsq in order, and press the button. Attention f When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password and...
Page 105
![Page 105
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 105
f The items will switch each time you press the button.
[OFF]
Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA
Y SETTING].
1) Press as to select [TEXT CHANGE]....](http://img.usermanuals.tech/thumb/58/100226/w300_projector_manual_9469_d-104.png "Page 105
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 105
f The items will switch each time you press the button.
[OFF]
Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA
Y SETTING].
1) Press as to select [TEXT CHANGE]....")
Chapter 4 Settings — [SECURITY] menu ENGLISH - 105 f The items will switch each time you press the button. [OFF] Hides the security message. [TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE]. [USER LOGO] Displays the image registered by the user. Note f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM. [TEXT CHANGE] Edit the text to be displayed when [TEXT] is selected in [DISPLA Y SETTING]. 1) Press as to select [TEXT CHANGE]....
Page 106
![Page 106
Chapter 4 Settings — [SECURITY] menu
106 - ENGLISH
2)
Press the button.
f The
[CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROLLER].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER] You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE] and [DISABLE].
f You can set the limitation on the control by the control panel or the rem\
ote control....](http://img.usermanuals.tech/thumb/58/100226/w300_projector_manual_9469_d-105.png "Page 106
Chapter 4 Settings — [SECURITY] menu
106 - ENGLISH
2)
Press the button.
f The
[CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROLLER].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER] You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE] and [DISABLE].
f You can set the limitation on the control by the control panel or the rem\
ote control....")
Chapter 4 Settings — [SECURITY] menu 106 - ENGLISH 2) Press the button. f The [CONTROL DEVICE SETUP] screen is displayed. 3) Press as to select [CONTROL PANEL] or [REMOTE CONTROLLER]. [CONTROL PANEL] You can set the limitation on the control from the control panel. [REMOTE CONTROLLER] You can set the limitation on the control from the remote control. 4) Press qw to switch between [ENABLE] and [DISABLE]. f You can set the limitation on the control by the control panel or the rem\ ote control....
Page 107
![Page 107
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 107
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-menu.
Refer to “Navigating through the menu” (
x page 62) for the operation of the menu screen.
Note
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model
No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by...](http://img.usermanuals.tech/thumb/58/100226/w300_projector_manual_9469_d-106.png "Page 107
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 107
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-menu.
Refer to “Navigating through the menu” (
x page 62) for the operation of the menu screen.
Note
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model
No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by...")
Chapter 4 Settings — [NETWORK] menu ENGLISH - 107 [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select an i\ tem from the sub-menu. Refer to “Navigating through the menu” ( x page 62) for the operation of the menu screen. Note f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by...
Page 108
![Page 108
Chapter 4 Settings — [NETWORK] menu
108 - ENGLISH
[SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to
green, yellow, or red depending on that value.
Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter
.
f MAX/MIN: Maximum/minimum value of the amount of error.
f Green (-12 dB or lower)
→ Normal signal quality level.
f Yellow (
-11 to -8 dB)
→ Warning level where there is the possibility of...](http://img.usermanuals.tech/thumb/58/100226/w300_projector_manual_9469_d-107.png "Page 108
Chapter 4 Settings — [NETWORK] menu
108 - ENGLISH
[SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to
green, yellow, or red depending on that value.
Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter
.
f MAX/MIN: Maximum/minimum value of the amount of error.
f Green (-12 dB or lower)
→ Normal signal quality level.
f Yellow (
-11 to -8 dB)
→ Warning level where there is the possibility of...")
Chapter 4 Settings — [NETWORK] menu 108 - ENGLISH [SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to green, yellow, or red depending on that value. Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter . f MAX/MIN: Maximum/minimum value of the amount of error. f Green (-12 dB or lower) → Normal signal quality level. f Yellow ( -11 to -8 dB) → Warning level where there is the possibility of...
Page 109
![Page 109
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 109
2)
Press the button.
f The
[PROJECTOR NAME] screen is displayed.
3) Select characters with the asqw buttons and press the button to enter the projector
name.
f Up to eight characters can be input.
f Select [ALL DELETE] to delete all the entered characters, or press the button on the remote
control to delete a character on the cursor in the entry field.
4)
Select [OK] with the as buttons and press the button.
f To cancel the...](http://img.usermanuals.tech/thumb/58/100226/w300_projector_manual_9469_d-108.png "Page 109
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 109
2)
Press the button.
f The
[PROJECTOR NAME] screen is displayed.
3) Select characters with the asqw buttons and press the button to enter the projector
name.
f Up to eight characters can be input.
f Select [ALL DELETE] to delete all the entered characters, or press the button on the remote
control to delete a character on the cursor in the entry field.
4)
Select [OK] with the as buttons and press the button.
f To cancel the...")
Chapter 4 Settings — [NETWORK] menu ENGLISH - 109 2) Press the button. f The [PROJECTOR NAME] screen is displayed. 3) Select characters with the asqw buttons and press the button to enter the projector name. f Up to eight characters can be input. f Select [ALL DELETE] to delete all the entered characters, or press the button on the remote control to delete a character on the cursor in the entry field. 4) Select [OK] with the as buttons and press the button. f To cancel the...
Page 110
![Page 110
Chapter 4 Settings — [NETWORK] menu
110 - ENGLISH
[WIRELESS LAN] [SSID]*1Displays the character string of SSID.
[IP ADDRESS]*1Displays the IP address.
[Presenter Light] [LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic used.
*1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is
inserted.
Note
f The settings of network are same for both the terminal and the terminal.
f The on-screen menu...](http://img.usermanuals.tech/thumb/58/100226/w300_projector_manual_9469_d-109.png "Page 110
Chapter 4 Settings — [NETWORK] menu
110 - ENGLISH
[WIRELESS LAN] [SSID]*1Displays the character string of SSID.
[IP ADDRESS]*1Displays the IP address.
[Presenter Light] [LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic used.
*1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is
inserted.
Note
f The settings of network are same for both the terminal and the terminal.
f The on-screen menu...")
Chapter 4 Settings — [NETWORK] menu 110 - ENGLISH [WIRELESS LAN] [SSID]*1Displays the character string of SSID. [IP ADDRESS]*1Displays the IP address. [Presenter Light] [LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic used. *1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is inserted. Note f The settings of network are same for both the terminal and the terminal. f The on-screen menu...