Panasonic Projector PT-DW730U User Manual

[SECURITY] menu 
ENGLISH - 71
Settings
Note 
z
The logo is displayed on the whole screen in 
the normal projection condition when [DEFAULT 
LOGO] is set. Since the menu screen is displayed, 
it is not possible to see the whole image even if the 
logo display is canceled by pressing the  
button. 
 
z
Separate software   Logo Transfer Software¡  is 
re quired to create and register the pictures of [USER 
LOGO]. Refer to the application software  download 
f

rom the website support information...

[SECURITY] menu 
72 - ENGLISH
Settings
 
■ [REMOTE CONTROLLER]
 
z
You can set the limitation on the control from 
the remote control. 
[ENABLE] Enables the button operation from 
the remote control. 
[DISABLE] Disables the button operation from 
the remote control. 
5)  Press ▲▼ to select [ENABLE] or 
[DISABLE], and press the  
button. 
6)  When the confirmation is displayed,  select [OK] or [CANCEL], and press 
the  button. 
Note
 
z
When a button operation is performed on the device 
set to [DISABLE],...

[NETWORK] menu 
ENGLISH - 73
Settings
[NETWORK] menu 
Select [NETWORK] from the main menu, and 
select the item from the sub-menu. 
Refer to “
Navigating through the menu ”
 
(
 page 41) regarding the operation of the menu 
screen.   
z
After selecting the item, press ÛÝ/¢/£ to set. 
[NETWORK SETUP]
Perform the initial setting of the network before using 
the network function. 
1)  Press ▲▼ to select [NETWORK 
SETUP]. 
2)  Press the  button. 
 
z
The [NETWORK SETUP] screen is displayed. 
3)  Press ▲▼...

[NETWORK] menu 
74 - ENGLISH
Settings
Network connections
The projector has a network function, and the following operations are available from the computer using the Web 
browser control.  
z
Setting and adjustment of the projector
 
z
Display of the projector status 
 
z
Transmission of an E-mail message when there is a problem with the projector 
Note  
z
A LAN cable is required to use the network function. 
Computer
Projector
LAN cable (straight) LAN cable (straight)
Hub
 
z
A Web browser is required...

[NETWORK] menu 
ENGLISH - 75
Settings
Accessing from the Web browser 
1)  Start up the Web browser on the computer. 
2)  Enter the IP address set on the projector into the URL entry field of the Web browser.  3)  Enter the user name and the password. 
 
z
The factory default setting of the user name is user1 (user rights)/ad\
min1 (administrator rights) and the 
password is panasonic (lower case). 
4)  Click [OK]. 
 
z
The [Projector status] page is displayed. 
Note
 
z
 When you wish to control the...

[NETWORK] menu 
76 - ENGLISH
Settings
 
■ Item description
(1)
(2)
(3)
(4)
(5) (1) Page switch tab
Click the tab to switch between pages.
(2) [Status] The status of the projector is displayed by clicking 
this item. 
(3) [Projector control] The [Projector control] page is displayed by clicking 
this item.
(4) [Detailed set up] The [Detailed set up] page is displayed by clicking 
this item. 
(5) [Change password] The [Change password] page is displayed by 
clicking this item. 
 
■ [Projector status] page...

[NETWORK] menu 
ENGLISH - 77
Settings
 
■ Error information page
When [Error (Detail)] is displayed on the [Projector status] screen, c\
lick it to display the error details.
 
z
The projector may go into the standby status to protect the projector de\
pending on the contents of the 
error. 
[OK]: Normal operation
[FAILED]: Occurrence of trouble
 
z
Description of problem occurrence [FAILED]: 
Parameter  Description
[MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult your 
dealer....

[NETWORK] menu 
78 - ENGLISH
Settings
 
■ [Network status] page
Click [Status] 
 [Network status].
The current network setting status is displayed. 
 
■ [Access error log] page
Click [Status] 
 [Access error log].
The error log on the WEB server is displayed such as access to the pages\
 that do not exist or access with 
unauthorized user names or passwords.
 
■ [Access log] page
Click [Status] 
 [Access log].
The log such as user name accessed to the WEB control page, accessed IP address, accessed...

[NETWORK] menu 
ENGLISH - 79
Settings
 
■ [Basic control] page
Click [Projector control] 
 [Basic control]. 
(1)
(2)
(3)
(4)
(6)
(5) (1) [POWER] ([ON]/[STANDBY])
Switches between on/off of the power. 
(2) [SHUTTER] ([ON]/[OFF]) Switches between use or not use of the shutter 
function. 
(3) [OSD] ([ON]/[OFF]) Switches between on (display)/off (no display) of the 
on-screen display function. 
(4) [SYSTEM] ([SELECTOR]) Switches the system method. 
(5) On-screen display of the projector The same contents as...

[NETWORK] menu 
80 - ENGLISH
Settings
 
■ [Network config] page
Click [Detailed set up] 
 [Network config]. 
 
z
The [CAUTION!] screen is displayed by clicking [Network config]. 
 
z
The current settings are displayed by pressing the [Next] button. 
 
z
The following setting change screen is displayed by pressing the [Change] button. \
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8) (1) [PROJECTOR NAME]
Enter the name of the projector. Also enter the host 
name if it is required when using a DHCP server, etc. 
(2)...