Panasonic Projector Pt Dw7000u Operating Instructions

21
• The projection distances listed here involve an error of ±5%.
• Keystone distortions are corrected in the way the screen size becomes smaller than the original one.Note
Projection distances by the type of projection lenses (for PT-DW7000U)
• For the screen aspect ratio of 16:9 Units: m (feet/inches)
Screen 
size
(inch)
Screen
dimensions
70
80
90
100
120
150
200
250
300
350
400
500
6000.871
(210)
0.996
(33)
1.120
(38)
1.245
(41)
1.494
(411)
1.868
(62)
2.491
(82)
3.113
(103)
3.736
(123)
4.358
(144)...

22
If the projector is used with a screen size not listed in this manual, check the diagonal dimension (inch) of your
screen and calculate the projection distance using the following formulas.
Calculation formulas for projection distance by lens types (for PT-D7700U)
Minimal distance:  L=0.1123 x Screen diagonal (inch) – 0.1158
Maximal distance: L=0.1786 x Screen diagonal (inch) – 0.1013
16:9 ET-D75LE5
(0.8:1)
Model number of projection lensAspect ratioProjection distance (L) formula Units: m 
L= 0.0158...

23
Calculation formulas for projection distance by lens types (for PT-DW7000U)
ET-D75LE5
(0.8:1)
Model number of projection lensAspect ratioProjection distance (L) formula Units: m 
L= 0.0176 x Screen diagonal (inch) – 0.0835 ET-D75LE1
(1.5–2.0 :1)Minimal distance:  L=0.0343 x Screen diagonal (inch) – 0.0760
Maximal distance: L=0.0458 x Screen diagonal (inch) – 0.1004 16:9
ET-D75LE2
(2.0–3.0 :1)16:9Minimal distance:  L=0.0460 x Screen diagonal (inch) – 0.0795
Maximal distance: L=0.0689 x Screen diagonal...

24
Connection
Before connection, read carefully the instruction manual for the device to be connected.
Turning off the power switch of the devices before connecting cables.
If any connection cable is not supplied with the device, or if no optional cable is available for connection of the
device, prepare a necessary system connection cable to suit the device.
Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture.  In
this case, a time base corrector...

25
SERIALS-VIDEOVIDEO REMOTE 1RGB 1 ININ IN
IN
OUT OUT
OUTSYNC/HD VD B/PBG/Y
REMOTE 2
R/PR
RS-232C (G) /  RS-422 (R) RS-232C (G) /  RS-422 (R)
INRGB 2 IN
Video deck (TBC built-in)
High-vision video deckControl PC Color monitor
Red (connected to PR terminal)
Blue (connected to P
B terminal)
Green (connected to Y terminal)
Video deck (TBC built-in)
Example of connecting with VIDEO devices
• When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or
use a TBC...

26
SERIALS-VIDEOVIDEO REMOTE 1RGB 1 ININ IN
IN
OUT OUT
OUTSYNC/HD VD B/PBG/Y
REMOTE 2
R/PR
RS-232C (G) /  RS-422 (R) RS-232C (G) /  RS-422 (R)
IN
SERIALS-VIDEOVIDEO REMOTE 1RGB 1 ININ IN
IN
OUT OUT
OUTSYNC/HD VD B/PBG/Y
REMOTE 2
R/PR
RS-232C (G) /  RS-422 (R) RS-232C (G) /  RS-422 (R)
IN
RGB 2 IN
RGB 2 IN
I/F
PC PC  Control PC
• When the main power of the main unit is turned off, also turn off the power of the PC.
Note
Attention
• For the specifications of the RGB signals that can be applied from the PC,...

27
SERIALS-VIDEOVIDEO REMOTE 1RGB 1 ININ IN
IN
OUT OUT
OUTSYNC/HD VD B/PBG/Y
REMOTE 2
R/PR
RS-232C (G) /  RS-422 (R) RS-232C (G) /  RS-422 (R)
IN
SERIALS-VIDEOVIDEO REMOTE 1RGB 1 ININ IN
IN
OUT OUT
OUTSYNC/HD VD B/PBG/Y
REMOTE 2
R/PR
RS-232C (G) /  RS-422 (R) RS-232C (G) /  RS-422 (R)
IN
RGB 2 IN
RGB 2 IN
OUT
O
F
FOFFPOWERONI
N
P
U
T
 
 
S
E
L
E
C
T1
2
34
56V
P
O
N
/
O
F
FS
i
g
n
a
l
 
S
e
l
e
c
t
o
r
 
T
W
-
S
W
SDigital broadcasting 
tunerDVD player Signal selector Video deck
(TBC built-in)Notebook...

28
SMPTE259M compliant : 480i, 576i
10BASE-T/100BASE-TX
SMPTE259M compliant : 480i, 576i
SMPTE292M compliant : 
720/60p, 720/59.94p, 720/50p
1 035/60i, 1 035/59.94i, 1 080/60i, 1 080/59.94i
1 080/50i, 1 080/24sF, 1 080/23.98sF, 1 080/30p
1 080/29.97p, 1 080/25p, 1 080/24p, 1 080/23.98p
10BASE-T/100BASE-TX
HDCP-compliant 
*1 DVI-D single link, DVI 1.0 compliant
EDID1 :
480p, 576p, 720/60p, 720/59.94p, 720/50p
       1 080/60i, 1 080/59.94i, 1 080/50i, 1 080/24sF, 
1 080/23.98sF
       1 080/30p, 1...

29
Procedure of installation
Disconnect the power before installing the input module.
Slot cover
Remove 2 screws.
Input module
Slot
Tighten the two screws.
Remove the slot cover.
Insert the input module.
Fix the input module.
Register the input signal.
This projector needs to register the type of input
signal after the installation of the input module.
(For details on the registration of the input signals,
refer to pages 40–43.) 

30
SD-SDI input 
module ET-MD77SD1
DVI-D input module
ET-MD77DV
Network module
ET-MD77NT SDI signal
DVI
signal
LAN
10BASE-T/
100BASE-TXProjector
High-vision 
video deckDVD player  Business 
digital VCR
PCHD/SD-SDI input 
module ET-MD77SD3
Connecting signals to the input module
When installing the projector, it is necessary to connect signals to the input module in accordance with the
connecting equipment.
Refer to the following diagram to establish proper signal connection. 
Installation of input module...