Panasonic Projector PT-DW100 Specifications

< 1 >
SPECFILE
Product Number :  PT-DW100
Product Name : 3-Chip DLP™ Projector
As of October 2008. Appearance and specifications are subject to change without notice. 

SPECFILE
PT-DW1003-Chip DLP™ Projector
As of October 2008< 2 >
Specifications
Main Unit
Power supply: North America:
Europe, Asia
Power consumption: North America:
Europe, Asia
DLP™ chip:  Panel size:
Display method:
Pixels:
Lens: 
Lamp:
Screen size:
Brightness *
1:
Center-to-corner uniformity *
1:
Contrast *
1:
Resolution: 
Scanning frequency:  RGB:
YP
BPR(YCBCR):
S-Video/Video:
Optical axis shift*
3: Vertical: 
Horizontal:
Keystone correction range:
Installation:
Terminals: DVI-D IN:
RGB1 IN:
R, G, B:...

SPECFILE
PT-DW1003-Chip DLP™ Projector
As of October 2008< 3 >
RGB2 IN:
R, G, B:
Y,  P
B, PR
VIDEO IN:
VIDEO OUT:
S-VIDEO IN:
LAN:
SERIAL IN *
5:
SERIAL OUT *
5:
REMOTE 1 IN:
REMOTE 1 OUT:
REMOTE 2 IN:
Optional board slot *
6:
With ET-MD77SD1 installed:  SERIAL IN:
SERIAL OUT:
With ET-MD77SD3 installed:  SERIAL IN:
SERIAL OUT:
With ET-MD100SD4 installed: Link A/Link B IN:
With ET-MD77DV installed:  DVI-D IN:
Power cord:
Cabinet material: 
Dimensions (W x H x D):
Weight*
7:  D-sub HD 15-pin x 1
0.7 Vp-p...

SPECFILE
PT-DW1003-Chip DLP™ Projector
As of October 2008< 4 >
Weights and dimensions shown are approximate. Specifications subject to change without notice.
*1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2 Smooth image reproduction may not be possible when a motion video signal with a vertical frequency other than 50 or 60 Hz is input.
*3 Shift range is limited during simultaneous horizontal and vertical shifting.
*4 WUXGA resolution is...

SPECFILE
PT-DW1003-Chip DLP™ Projector
As of October 2008< 5 >
Shape of the plug receptacle
Note:  Be sure to use the power plug adaptor cord supplied with the projector. 
The supplied power plug adaptor can be used with the PT-DZ12000 only.
125 V AC, 20 A
(NEMA 5-20R) PT-DW100U PT-DW100E
250 V AC, 15 A
(NEMA 6-15R)220-240V AC, 16 A 220-240V AC, 13 A/15 A
Dimensions
Terminals
448 (17-5/8˝) (4-23/32˝)120
477
(18-25/32˝)
265 (10-7/16˝) 320 (12-19/32˝) 218 (8-19/32˝)36
(1-13/32˝)607
(23-29/32˝) 643...

SPECFILE
PT-DW1003-Chip DLP™ Projector
As of October 2008< 6 >
Standard setting-up positions
Upper edge of projected image
Projected image
Projected imageLL L
H H
416.5– 536.5 163
(16-13/32˝–
21-1/8˝) (6-13/32˝) 157
(6-3/16˝)
*1
87.5
(3-7/16˝) Lower edge of projected image
unit : mm (inch)
NOTE: 
Illustrations show the projector installed
using optional ceiling bracket
ET-PKD100H and an optional lens.
This illustration is not drawn to scale.
*1 When the lens protrudes to the maximum.
414 mm (16-5/16˝)...

SPECFILE
PT-DW1003-Chip DLP™ Projector
As of October 2008< 7 > 16:9 aspect ratio
Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.
ET-D75LE6 minimum L (mm) = (diagonal screen size in inches) x 23.1 - 56.6
maximum L (mm) = (diagonal screen size in inches) x 27.7 - 73.6
ET-D75LE1 minimum L (mm) = (diagonal screen size in inches) x 34.3 - 76.0
maximum L (mm) = (diagonal screen size in inches) x 45.8 - 100.4...

SPECFILE
PT-DW1003-Chip DLP™ Projector
As of October 2008< 8 >
List of compatible signals
This projector supports RGB signals with horizontal frequencies of 15 to 100 kHz, vertical frequencies
of 24 to 120 Hz and dot clock frequencies of 20 MHz to 162 MHz.
NOTE: The native resolution of this projector is 1,366 x 768 pixels. If the display resolution of the input signal is different from the
native resolution, image compression or expansion will be used to convert the input signal to a level within the...

SPECFILE
PT-DW1003-Chip DLP™ Projector
As of October 2008< 9 >
Serial connector
The serial connector complies with RS-232C. To control the projector from a personal computer, com-
mands must be input through communication software, based on the format and satisfying the commu-
nication conditions shown below.
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent
in this order. Add parameters according to the details of control. Communication...

SPECFILE
PT-DW1003-Chip DLP™ Projector
As of October 2008< 10 >
Control commands
Command : Parameter Function Callback
PON
POF
IIS:RG1
IIS:RG2
IIS:VID
IIS:SVD
IIS:DVI
IIS:AUX
LPM:0
LPM:1
LPM:2
LPM:3
LPM:4
LPM:5
LPM:6
LPM:7
LPM:8
LPM:9
LPM:10
LPM:11
LPM:12
LPM:13
OSH:1
OSH:0
OPP:0
OPP:1
OPP:2
OPP:3
OAS
VPM:NAT
VPM:STD
VPM:DYN
VPM:CIN
VPM:GRA
OTE:0
OTE:1
OTE:2
OTE:4
OTE:9
OTE:10
TSD:y1y2y3y4m1m2d1d2w
TST:h1h2m1m2s1s2
OOS:1
OOS:0Standby power on
Standby power off
RGB 1
RGB 2
Video
S-Video
DVI
AUX
Quad (four...