Panasonic Projector PT-D4000U User Manual

							11
AC IN terminal (page 22)
Connect the supplied line power cord into this
receptacle.
Do not connect any other cable to this socket.
Air filter (page 51)
Security lock
Attach a commercial burglar prevention cable (e.g.,
from Kensington) to this lock port. It is compatible
with the Microsaver Security System from
Kensington. 
Anti-theft hook
Attach a chain or other fastening device available
from a hardware store through this clamp.
Level-adjusting feet (page 22)
Use these feet to adjust the tilt of the projector.
(The leveling feet at the front left and right can be
adjusted.)
Lens release button (page 24)
Press this to remove the projection lens.
Projection lens
Lens for projecting images on the screen.
Lens left/right adjusting dial (page 25)
Turn this clockwise to move the screen to the left;
conversely, turn it counterclockwise to move it to
the right.
Remote control receiver window (front) (page 14)
This window receives the signal beam emitted from
the remote control.
Focus ring (page 24)
For focus adjustment.
Powered focus adjustment is also available.
Temperature monitor (TEMP) (page 50)
Lighting or blinking of this lamp indicates an
abnormal condition of the internal temperature.
LAMP1 monitor (page 50)
This lamp lights up when the time to replace lamp
unit 1 is reached. It also blinks if something
unusual occurs in the lamp circuit.
LAMP2 monitor (page 50)
This lamp lights up when the time to replace lamp
unit 2 is reached. It also blinks if something
unusual occurs in the lamp circuit.
Power indicator (page 22)
The lamp lights in red when the MAIN POWER
switch is turned to “l” (on). It turns to green when
the POWER ON button of the remote control or the
main unit is pressed.
Lens cap
Cap the lens whenever the projector is left unused.
Air intake vents
Side-mounted 
connection terminals 
(page 13)Status LED lights
(Refer to the figure 
 on the right.)
Front and side of the projector
Status LED lights
• Do not remove the upper cover (white top
panel).Attention 
						

							12
Name and function of parts 
Lamp unit cover
The lamp unit is housed.
MAIN POWER switch (page 22)
Use this switch to turn on “I” and off “O” the main
power applied to the projector.
Remote control receiver window (rear) (page 14)
This also receives the signal beam coming from
the remote control.
POWER ON ( I ) button (page 22)
Turns on the power.
POWER STANDBY ( ) button (page 23)
Switches the power to the “standby” mode.
RGB1 button (page 22)
Switches to RGB1 input.
RGB2 button (page 22)
Switches to RGB2 input.
VIDEO button (page 22)
Switches to video input.
S-VIDEO button (page 22)
Switches to S-VIDEO input.
MENU button (page 27)
Displays and clears the MAIN MENU. It can also
return to the previous screen when the menu is
displayed.
The on-screen display (OSD) selection menu can
be displayed by holding down the menu key for at
least three seconds.
Air exhaust ventsAUTO SETUP button (page 25)
Pressing this button while projecting an image
automatically corrects the picture positioning on
the screen.
DVI button (page 22)
Switches to DVI-D input.
SHUTTER button (page 25)
Press this button to black out the image
temporarily.
ENTER button (page 27)
Press this button to enter your menu selection or to
run function.
LENS button (page 24)
Switches to the adjustment mode for lens focus,
zoom and shift (position).
Arrow ( ) buttons (page 27)
Use to select an item on the menu screen, change
setting and adjust the level.
Also use them to enter the “SECURITY” password.
Rear view of the main unitControls on rear panel
Controls on rear panel
Do not place your hands or other
objects close to the air outlet port.
• Heated air comes out of the air outlet port. Do not
place your hands or face, or objects which cannot
withstand heat close to this port [allow at least 50
cm (19.7) of space], otherwise burns or damage
could result. 
						

							13
VIDEO IN terminal (page 21) 
An input terminal for video signals. (BNC)
S-VIDEO IN terminal (page 21)
An input terminal for S-Video signals. 
(MIN4-pin DIN)
This terminal complies with S1 signals and
automatically toggles between 16:9 and 4:3
according to the size of input signals.
RGB 1 input (RGB 1 IN) terminal (page 21)
A terminal to input RGB or YP
BPRsignals. (BNC)
RGB 2 input (RGB 2 IN) terminal (page 21)
A terminal to input RGB or YP
BPRsignals. (D-Sub
15-pin female)
DVI-D IN terminal (page 21)
DVI-D signals are applied to this terminal. (24-pin
DVI-D connector)
LAN terminal (page 37)
This terminal is used to control the projector from
the PC. (10BASE-T/100BASE-TX compliant)
REMOTE1 lN/OUT terminal (page 15)
When two or more main units are used in the
system, they can be connected and controlled with
M3 stereo mini jack cable available in the market.
REMOTE2 IN terminal (page 49)
The user can remotely control the main unit by
using an external control circuit to this terminal. 
(D-Sub 9-pin female)
SERIAL IN terminal (pages 23, 48)
Use the RS-232C serial terminal as an alternative
interface for controlling the projector from your PC.
(D-Sub 9-pin female)
SERIAL OUT terminal (pages 23, 48)
The signal applied to the serial input terminal
appears at this terminal. (D-Sub 9-pin male)
RGB 2 IN
 VDSYNC/HDB/PBG/YRR/P
SERIALREMOTE 1
REMOTE 2 ININOUTLANDVI-D INRGB 1 INVIDEO INS-VIDEO  IN
IN OUT
Side-mounted
connection terminals
LAN terminal (10BASE-T/100BASE-TX)
Connect LAN cable. 
LAN 10/100 lamp (Yellow)
Lights up when 100BASE-TX
connected.
LAN LINK/ACT lamp (Green)
Lights up when connected.
Flashes when receiving/sending
signals. 
						

							14
Using the remote control unit
Loading dry cells
When loading batteries into the battery
compartment of the remote control, make sure that
their polarities are correct.
1. Open battery compartment lid.
Open the lid in the order of steps  and  .
2. Insert the dry cells.
Into battery compartment, with their polarities
orientated as indicated ( ,  ) in the
compartment.
3. Close the battery compartment lid.
Replace the battery compartment lid over the
compartment and slide until it clicks.
Effective range of remote
control operation
The remote control should normally be aimed at either
the front or rear remote control receiver window on
the projector (figure 1). Otherwise, it may also be
aimed at the screen, which will reflect commands
back to the projector’s front receiver window as
illustrated in figure 2.
The effective control range is approx. 30 m (98.4)
from the beam receiver on the front or rear.
• Do not drop the remote control unit.
• Do not expose remote control unit to
any liquid.
• Do not use NiCd batteries.Attention
Note• When the remote control is aimed at
the screen, the effective control range
may be reduced due to the optical loss
by screen reflection.
• The remote control may not function
properly if an object is in the light path.
• The remote control receiver may not
function properly in intense ambient
light such as fluorescent lamps.
Carefully site the projector so its
remote control receiver windows will
not be directly exposed to intense
light.
Accessory type-AA dry
batteries (insert the negative
side first).
(Front)(Rear)
[Top view] Remote 
controlRemote 
control
30˚ 30˚
30˚ 30˚
[Side view] Remote 
control
Remote 
control 15˚
15˚15˚
15˚
Remote control 
receiver window 
(rear) Remote control 
receiver window 
(front)Projector
Remote control Screen
Figure 1
Figure 2 
						

							15
Setting projector ID number to remote control
Every projector has its ID number and the ID number of the controlling projector must be set to the remote
control in advance so that the user can operate the remote control. The ID number of the projector is set to
“ALL” on shipping, and use the ID ALL button of the remote control when using only a single projector.
Procedure of ID setting 
Press the ID SET button, and within five seconds use the number (0 to 9) buttons
to enter the 2-digit ID number set by the projector.
However, if the ID ALL button is pressed, the projector can be controlled regardless of the ID number of the
projector (simultaneous control mode).
• Do not press the ID SET button accidentally or carelessly because the ID number on the remote
control can be set even when no projector is around.
If the ID SET button is pressed, the ID number goes back to the one set before pressing the ID
SET button unless a numeric button is pressed within five seconds after the ID SET button is
pressed.
• Your specified ID number is stored in the remote control unit unless another one is specified later.
However, the stored ID will be erased if the batteries of the remote control are left exhausted.
When the dry cells are replaced, set the same ID number again.Attention
Connect to the projector to use with a cable
When multiple main units are connected in the system, connect the units with the M3 stereo mini jack cable
available in the market to simultaneously control the multiple main units with a single remote control unit through
the REMOTE1 IN/OUT terminal. It is effective to use the wired remote control in the environment in which an
obstacle stands in the light path or where devices are susceptible to outside light.
• Use two-core shielded cable of length smaller than 15 m (49.2). If the cable length exceeds 15 m
(49.2), or if the shielding of the cable is inadequate, the operation may be unsatisfactory.Attention
B/PBG/YRR/P
REMOTE 1
REMOTE 2 INRGB 1 INVIDEO INS-VIDEO  IN
IN OUT
Connect to the 
secondary projector
M3 stereo mini jack cable 
(available in the market) 
						

							16
Installation
FRONT REAR
FLOOR
CEILING
(Default position)
Installation geometry
When planning the projector and screen geometry, refer to the figure below and the information on the next
page for reference. After the projector is roughly positioned, picture size and vertical picture positioning can be
finely adjusted with the powered zoom lens and lens tilt mechanism.
Side view
With optional ceiling mount
bracket (ET-PKD56H)
256
(10.1)
HH
ScreenSH185
(7.3)L
L
 417-497
(16.4-19.6)
Top view
200
(7.9) 100 (3.9)
200 (7.9) 100 (3.9) LScreen
SW
L : Projection distance
SH : Image height
SW : Image width
H : Distance from center of lens to bottom edge
of projected image.
• Do not place or use one projector on top of another projection unit.
• Leave a clearance of at least 50 cm (19.7) so that the ventilation opening on the rear panel will not be
blocked. (page 59)
Attention
Projection schemes
Any of the following four projection schemes can be used depending on user’s needs or viewing conditions.
Use “OPTION2” menu (chosen from the MAIN MENU) to choose the appropriate projection scheme. (page 34)
unit : mm, ( ) : inch 
						

							17
Projection distance by projection lens
Unit : m, ( ) : inch, [ ] : footScreen aspect ratio 4:3
1.27
(50)
1.52
(60)
1.78
(70)
2.03
(80)
2.29
(90)
2.54
(100)
3.05
(120)
3.81
(150)
5.08
(200)
6.35
(250)
7.62
(300)
8.89
(350)
10.16
(400)
12.70
(500)
15.24
(600)
Diagonal
length
(SD)
Height
(SH)
1.02
[3.33]
1.22
[4.00]
1.42
[4.67]
1.63
[5.33]
1.83
[6.00]
2.03
[6.66]
2.44
[8.00]
3.05
[10.00]
4.06
[13.33]
5.08
[16.66]
6.10
[19.99]
7.11
[23.33]
8.13
[26.66]
10.16
[33.32]
12.19
[39.99]
Width
(SW)Minimum
(LW)
Maximum
(LT)
1.81
[5.11]
2.18
[7.10]
2.55
[8.40]
2.92
[9.60]
3.29
[10.90]
3.66
[12.00]
4.41
[14.50]
5.52
[18.10]
7.38
[24.20]
9.23
[30.30]
11.09
[36.40]
12.95
[42.50]
14.80
[48.60]
18.51
[60.80]
22.23
[72.11]
Minimum
(LW)
2.40
[7.10]
2.89
[9.50]
3.38
[11.10]
3.87
[12.80]
4.36
[14.30]
4.85
[15.10]
5.83
[19.10]
7.30
[23.11]
9.75
[31.11]
12.20
[40.00]
14.65
[48.00]
17.10
[56.10]
19.55
[64.10]
24.45
[80.20]
29.35
[96.30]
Maximum
(LT)
Minimum
(LW)
Maximum
(LT)
0.79
[2.60]
0.96
[3.15]
1.13
[3.69]
1.29
[4.24]
1.46
[4.78]
1.62
[5.33]
1.96
[6.42]
2.45
[8.05]
3.28
[10.77]
–
–
–
–
–
–
ET-
DLE050Model number of 
projection lens
Throw ratio*
1
Projection screen sizeProjection distance (L) Lens typeWide-angle
zoom lens
ET-DLE100  Standard 
zoom lens
Minimum
(LW)
Maximum
(LT)
Intermediate-focus
zoom lens
ET-DLE200Optional lens
Long-focus
zoom lens
ET-DLE300
Wide-angle
fixed-focus
lens
(L)Minimum
(LW)
Maximum
(LT)
Ultra-long-focus
zoom lens
ET-DLE400Height
position: 
H*
2
0.76
[2.50]
0.91
[3.00]
1.07
[3.50]
1.22
[4.00]
1.37
[4.50]
1.52
[5.00]
1.83
[6.00]
2.29
[7.50]
3.05
[10.00]
3.81
[12.50]
4.57
[15.00]
5.33
[17.50]
6.10
[19.99]
7.62
[24.99]
9.14
[29.99]
1.33
[4.38]
1.61
[5.28]
1.89
[6.19]
2.16
[7.09]
2.44
[8.00]
2.71
[8.90]
3.27
[10.72]
4.09
[13.43]
5.47
[17.96]
6.85
[22.48]
8.23
[27.01]
9.61
[31.54]
10.99
[36.06]
13.75
[45.12]
16.51
[54.17]1.81
[5.94]
2.18
[7.16]
2.56
[8.38]
2.93
[9.60]
3.30
[10.82]
3.67
[12.04]
4.42
[14.49]
5.53
[18.15]
7.39
[24.25]
9.25
[30.35]
11.11
[36.45]
12.97
[42.55]
14.83
[48.65]
18.55
[60.85]
22.27
[73.05]3.84
[12.59]
4.63
[15.19]
5.43
[17.80]
6.22
[20.41]
7.02
[23.02]
7.81
[25.62]
9.40
[30.84]
11.79
[38.66]
15.76
[51.70]
19.74
[64.74]
23.71
[77.78]
27.69
[90.81]
31.66
[103.85]
39.61
[129.93]
47.56
[156.00]
6.03
[19.78]
7.26
[23.82]
8.49
[27.86]
9.73
[31.90]
10.96
[35.94]
12.19
[39.98]
14.65
[48.06]
18.35
[60.18]
24.51
[80.39]
30.67
[100.59]
36.83
[120.80]
42.99
[141.00]
49.15
[161.21]
61.47
[201.62]
73.79
[242.03]
2.45
[8.05]
2.96
[9.70]
3.46
[11.36]
3.97
[13.01]
4.47
[14.66]
4.97
[16.32]
5.98
[19.62]
7.49
[24.58]
10.01
[32.85]
12.53
[41.11]
15.05
[49.38]
17.57
[57.64]
20.09
[65.91]
25.13
[82.44]
30.17
[98.97]4.04
[13.26]
4.87
[15.97]
5.69
[18.67]
6.52
[21.37]
7.34
[24.08]
8.16
[26.78]
9.81
[32.18]
12.28
[40.29]
16.40
[53.81]
20.52
[67.32]
24.64
[80.83]
28.76
[94.35]
32.88
[107.86]
41.12
[134.89]
49.36
[161.91]
5.90
[19.37]
7.08
[23.22]
8.26
[27.08]
9.43
[30.94]
10.61
[34.80]
11.78
[38.65]
14.14
[46.37]
17.66
[57.94]
23.54
[77.23]
29.42
[96.51]
35.30
[115.80]
41.18
[135.08]
47.06
[154.37]
58.82
[192.94]
70.58
[231.52]
8.30
[27.21]
9.94
[32.61]
11.59
[38.01]
13.23
[43.40]
14.88
[48.80]
16.53
[54.20]
19.82
[65.00]
24.76
[81.20]
32.99
[108.19]
41.22
[135.19]
49.45
[162.18]
57.68
[189.17]
65.91
[216.17]
82.37
[270.16]
98.83
[324.15]
0 to 0.38
(0 to 15)
0 to 0.46
(0 to 18)
0 to 0.53
(0 to 21)
0 to 0.61
(0 to 24)
0 to 0.69
(0 to 27)
0 to 0.76
(0 to 30)
0 to 0.91
(0 to 36)
0 to 1.14
(0 to 45)
0 to 1.52
(0 to 60)
0 to 1.91
(0 to 75)
0 to 2.29
(0 to 90)
0 to 2.67
(0 to 105)
0 to 3.05
(0 to 120)
0 to 3.81
(0 to 150)
0 to 4.57
(0 to 180) (0.8:1)
(1.3–1.8:1) (1.8–2.5:1) (2.5–4.0:1) (3.7–5.7:1) (5.7–8.0:1)
*1The throw ratio is based on the value during projection onto an 80-inch screen size.
*2Lens shift is not available when using the ET-DLE050, and so the height position (H) is SH/2. 
						

							18
Installation
Unit : m, ( ) : inch, [ ] : footScreen aspect ratio 16:9
1.27
(50)
1.52
(60)
1.78
(70)
2.03
(80)
2.29
(90)
2.54
(100)
3.05
(120)
3.81
(150)
5.08
(200)
6.35
(250)
7.62
(300)
8.89
(350)
10.16
(400)
12.70
(500)
15.24
(600)
Diagonal
length
(SD)
Height
(SH)
1.11
[3.63]
1.33
[4.36]
1.55
[5.08]
1.77
[5.81]
1.99
[6.54]
2.21
[7.26]
2.66
[8.71]
3.32
[10.89]
4.43
[14.52]
5.53
[18.15]
6.64
[21.78]
7.75
[25.41]
8.86
[29.05]
11.07
[36.31]
13.28
[43.57]
Width
(SW)Minimum
(LW)
Maximum
(LT)
1.97 
[6.58]
2.38 
[7.91]
2.78 
[9.24]
3.19 
[10.56]
3.59 
[11.89]
3.99 
[13.22]
4.80 
[15.87]
6.02 
[19.85]
8.04 
[26.48]
10.06 
[33.12]
12.08 
[39.75]
14.11 
[46.38]
16.13 
[53.01]
20.17 
[66.28]
24.22 
[79.55]
Minimum
(LW)
2.62 
[8.70]
3.15 
[10.45]
3.69 
[12.20]
4.22 
[13.96]
4.75 
[15.71]
5.29 
[17.46]
6.35 
[20.96]
7.96 
[26.21]
10.62 
[34.96]
13.29 
[43.72]
15.96 
[52.47]
18.63 
[61.22]
21.30 
[69.98]
26.64 
[87.48]
31.97 
[104.99]
Maximum
(LT)
Minimum
(LW)
Maximum
(LT)
0.87
[2.85]
1.05
[3.44]
1.23
[4.04]
1.41
[4.63]
1.59
[5.22]
1.77
[5.82]
2.14
[7.01]
2.68
[8.79]
3.58
[11.76]
–
–
–
–
–
–
ET-
DLE050Model number of 
projection lens
Throw ratio*
1
Projection screen sizeProjection distance (L) Lens typeWide-angle
zoom lens
ET-DLE100  Standard 
zoom lens
Minimum
(LW)
Maximum
(LT)
Intermediate-focus
zoom lens
ET-DLE200Optional lens
Long-focus
zoom lens
ET-DLE300
(L)
Minimum
(LW)
Maximum
(LT)
Ultra-long-focus
zoom lens
ET-DLE400Height
position: 
H*
2
0.62
[2.04]
0.75
[2.45]
0.87
[2.86]
1.00
[3.27]
1.12
[3.68]
1.25
[4.08]
1.49
[4.90]
1.87
[6.13]
2.49
[8.17]
3.11
[10.21]
3.74
[12.25]
4.36
[14.30]
4.98
[16.34]
6.23
[20.42]
7.47
[24.51]
1.46
[4.79]
1.76
[5.78]
2.06
[6.76]
2.36
[7.75]
2.66
[8.74]
2.96
[9.72]
3.57
[11.70]
4.47
[14.66]
5.97
[19.60]
7.48
[24.53]
8.98
[29.47]
10.49
[34.41]
11.99
[39.34]
15.00
[49.22]
18.01
[59.09]1.98
[6.49]
2.38
[7.81]
2.79
[9.14]
3.19
[10.47]
3.60
[11.80]
4.00
[13.13]
4.81
[15.78]
6.03
[19.77]
8.05
[26.41]
10.08
[33.05]
12.10
[39.70]
14.13
[46.34]
16.15
[52.98]
20.20
[66.26]
24.25
[79.55]4.19
[13.75]
5.06
[16.59]
5.92
[19.43]
6.79
[22.27]
7.66
[25.11]
8.52
[27.95]
10.25
[33.63]
12.85
[42.15]
17.18
[56.36]
21.51
[70.56]
25.84
[84.76]
30.17
[98.96]
34.50
[113.17]
43.16
[141.57]
51.82
[169.98]
6.58
[21.58]
7.92
[25.98]
9.26
[30.38]
10.61
[34.78]
11.95
[39.19]
13.29
[43.59]
15.97
[52.39]
20.00
[65.60]
26.71
[87.61]
33.42
[109.61]
40.13
[131.62]
46.84
[153.63]
53.55
[175.64]
66.97
[219.66]
80.39
[263.68]
2.68
[8.79]
3.23
[10.59]
3.78
[12.39]
4.33
[14.19]
4.88
[15.99]
5.42
[17.79]
6.52
[21.39]
8.17
[26.80]
10.91
[35.80]
13.66
[44.80]
16.40
[53.81]
19.15
[62.81]
21.89
[71.81]
27.38
[89.82]
32.87
[107.83]
4.41
[14.48]
5.31
[17.42]
6.21
[20.37]
7.11
[23.31]
8.01
[26.26]
8.90
[29.21]
10.70
[35.10]
13.39
[43.93]
17.88
[58.66]
22.37
[73.39]
26.86
[88.11]
31.35
[102.84]
35.84
[117.57]
44.82
[147.02]
53.80
[176.48]
6.43
[21.09]
7.71
[25.29]
8.99
[29.49]
10.27
[33.69]
11.55
[37.90]
12.83
[42.10]
15.40
[50.50]
19.24
[63.11]
25.64
[84.11]
32.05
[105.12]
38.45
[126.13]
44.86
[147.14]
51.26
[168.15]
64.07
[210.16]
76.88
[252.18]
9.03
[29.62]
10.82
[35.50]
12.62
[41.38]
14.41
[47.26]
16.20
[53.14]
18.00
[59.02]
21.58
[70.79]
26.96
[88.43]
35.93
[117.83]
44.89
[147.24]
53.86
[176.64]
62.82
[206.05]
71.79
[235.46]
89.72
[294.27]
107.65
[353.08] 
-0.10 to 0.31
(-4 1/4 to 12 1/4)
-0.12 to 0.37
(-4 29/32 to 14 45/64)
-0.15 to 0.44
(-5 23/32 to 17 5/32)
-0.17 to 0.50
(-6 17/32 to 19 39/64)
-0.19 to 0.56
(-7 23/64 to 22 1/16)
-0.21 to 0.62
(-8 11/64 to 24 33/64)
-0.25 to 0.75
(-9 13/16 to 29 27/64)
-0.31 to 0.93
(-12 1/4 to 36 49/64)
-0.42 to 1.25
(-16 11/32 to 49 1/32)
-0.52 to 1.56
(-20 27/64 to 61 9/32)
-0.62 to 1.87
(-24 33/64 to 73 35/64)
-0.73 to 2.18
(-28 19/32 to 85 51/64)
-0.83 to 2.49
(-32 11/32 to 98 3/64)
-1.04 to 3.11
(-40 55/64 to 122 9/16)
-1.25 to 3.74
(-49 1/32 to 147 5/64)
Wide-angle
fixed-focus
lens
(0.8:1)
(1.3–1.8:1) (1.8–2.5:1) (2.5–4.0:1) (3.7–5.7:1) (5.7–8.0:1)
*1The throw ratio is based on the value during projection onto an 80-inch screen size.
*2Lens shift is not available when using the ET-DLE050, and so the height position (H) is SH/2. 
						

							19
Note• The dimensions in the table in pages 17, 18 and the values obtained from the above formulas may
contain slight errors.
• When an SXGA signal is input and projected, the right and left ends of the picture will be blanked
and the aspect ratio will be 5:4.
• The brightness is different between the wide lens position settings and telephoto lens position
settings.
Standard 
zoom lens
Wide-angle fixed-
focus lens
Wide-angle
zoom lens
Intermediate-focus
zoom lens
Long-focus
zoom lens
Ultra-long-focus 
zoom lensModel No. :
ET-DLE050
Model No. :
ET-DLE100
Model No. :
ET-DLE200
Model No. :
ET-DLE300
Model No. :
ET-DLE4004:3
16:9
4:3
16:9
4:3
16:9
4:3
16:9
4:3
16:9
4:3
16:9Minimum (LW)
Maximum (LT)
Minimum (LW)
Maximum (LT)
Minimum (LW)
Maximum (LT)
Minimum (LW)
Maximum (LT)
Minimum (LW)
Maximum (LT)
Minimum (LW)
Maximum (LT)
Minimum (LW)
Maximum (LT)
Minimum (LW)
Maximum (LT)
Minimum (LW)
Maximum (LT)
Minimum (LW)
Maximum (LT)L=0.0371 x SD-0.0507
L=0.0490 x SD-0.0500
L=1.8270 x SD-0.0507
L=2.4110 x SD-0.0500
L=0.0166 x SD-0.0361
L=0.0181 x SD-0.0361
L=0.0276 x SD-0.0452
L=0.0372 x SD-0.0478
L=0.0301 x SD-0.0452
L=0.0405 x SD-0.0478
L=0.0504 x SD-0.0657
L=0.0824 x SD-0.0758
L=0.0549 x SD-0.0657
L=0.0898 x SD-0.0758
L=0.0795 x SD-0.1380
L=0.1232 x SD-0.1310
L=0.0866 x SD-0.1380
L=0.1342 x SD-0.1310
L=0.1176 x SD+0.0244
L=0.1646 x SD+0.0651
L=0.1281 x SD+0.0244
L=0.1793 x SD+0.0651(L, LW, LT : m    SD : inch)
Lens type Aspect ratio Projection distance (L) formula
Calculation formulas for projection distance by lens types 
						

							20
Connection
Setup precautions
• Before connecting any of your video/audio equipment to the projector, carefully read the owners manual
supplied with the equipment once again.
• All cable connections should be made with the entire system devices, including the projector, first turned off.
• Obtain commercial interconnecting cables for devices supplied with no accessory or optional interconnect
cables.
• Video signals containing too much jitter may cause the images on the screen to randomly wobble or shake.
Inserting a time base corrector (TBC) in the projector’s video line will relieve this problem.
• The projector only accepts composite-video, S-Video, analog-RGB (with TTL sync. level) and digital signal.
• Some PC models are not compatible with PT-D5700U/PT-D5700UL/PT-DW5100U/PT-DW5100UL projectors.
• When using long cables to connect various equipment to the projector, there is a possibility that the image will
not be output correctly unless a compensator is used.
• The pin assignments on the S-VIDEO IN terminal are
as follows:• The pin assignments on the DVI-D input terminal
are as follows (interface with DVI-D output
terminal on PC):
• The pin assignments on the RGB2 input terminal are
as follows:
Viewed from mating side
Pin No.           Signal
Ground (luminance)
Ground (color)
Luminance signal
Color signal
Pin  : Not used.
Pins - , and : Ground
 Viewed from mating side
            Signal
R/P
R
G/G · SYNC/Y
B/P
B
HD/SYNC
VD
Pin No.
Viewed from mating side
Pin No.            Signal
T. M. D. S data 2–
T. M. D. S data 2+
T. M. D. S data 2
shield
DDC clock
DDC data
T. M. D. S data 1–
T. M. D. S data 1+
T. M. D. S data 1
shield            Signal
+5 V
Ground
Hot plug sense
T. M. D. S data 0–
T. M. D. S data 0+
T. M. D. S data 0
shield
T. M. D. S clock 
shield
T. M. D. S clock+
T. M. D. S clock–Pin No.
• The DVI-D input terminal supports single link only.
• EDID settings may be needed depending on the DVI
equipment being connected. (page 33)
• The DVI-D input terminal can be used to connect to a
DVI equipment, but note that images may not appear
or the projector may not work properly when
connected to certain DVI equipment. 
• This projector supports HDCP.