Panasonic Projector Pt D4000e Specifications

							The 4,000-lumen, 1-chip DLP™ system has further increased 
image quality and overall system efficiency.

	
 
	

4,000lm
XGA
PT-
 
						

							NEW
Further expanding reliability 
and picture quality
PT-D4000E
DLP™ 
Projector
High power brightness
4,000 lm
Panasonic's DLP™ system projectors have taken another step 
forward. Now they produce even better images while 
maintaining all of their highly reliable functions. 
Visibility has been improved in rooms 
with the lights turned on, and 
durability has been increased with 
the new AC lamp.
High brightness and high picture quality
Ultra bright 4,000-lmNEWNEW
More effective 
noise reduction
Dynamic 
sharpness control Progressive cinema 
scan 
(3/2 Pulldown)
This interlace/progressive conversion technology 
automatically detects when the input signal is 
derived from filmed material and selects the 
optimum progressive processing method to 
assure faithful reproduction of the original image.
New IP 
conversion circuit
The PT-D4000E features a new IP conversion 
circuit that produces more detailed images than 
our previous models.
Full 10-bit picture 
processing
The use of a full 10-bit image processing system 
provides smooth tonal expression. For example, 
skin tones appear natural and true to life.Images are noticeably clearer, thanks to higher-
performance frame noise reduction, which lowers 
image graininess, and improved MPEG noise reduction, 
which suppresses the block noise and mosquito noise 
that are common in fast-action scenes.
3D colour 
management system
Compensation provides optimal levels of colour 
saturation, hue, and brightness that were not 
possible with conventional projectors. Colours 
approach those of the original image, even on 
large-screen displays.The dynamic sharpness control circuit adjusts 
the video signal waveforms based on the 
difference in brightness of adjacent pixels for a 
sharp, clear picture that is relatively unaffected 
by signal noise.
NEWNEWNEW
System daylight view
The system daylight view function uses an 
image processing circuit to compensate 
for the loss of colour saturation that 
occurs when light reflects onto the screen 
from bright surroundings. It is especially 
effective for producing crisp, sharp 
images in dark portions containing 
gradation. The function can be adjusted in 
three steps.Off
OnThe PT-D4000E offers 4,000 lumens of 
brightness, thanks to the newly developed AC 
lamp and more efficient reflectors and synthetic 
mirror. Real-life images are also produced in 
rooms with the lights turned on. 
						

							Excellent reliability
Flexible system installation
NEW
Micro cut filter
A filter in the air intake section traps dust 
particles that are 10 microns* or larger. By 
capturing approximately 7 times as much dust 
as conventional filters, it guards against optical 
blocks and reduces the penetration of dust into 
to the interior to provide 
stable operation by, for 
example, preventing 
drops in brightness.
*10-micron dust = lint, 
pollen, etc.
Dual lamp system Liquid-cooling system
Panasonic's original liquid-cooling system 
directly cools the DLP™ chip, which extends 
PT-D4000E performance and attains a high level 
of reliability. It also enables operation in 
temperatures up to 
45˚C/113 ˚F for use in a 
wider variety of environments, and maintains a 
more stable performance even in harsh 
conditions while keeping the operating sound 
down to a quiet 29 dB*.
*with lamp mode: low
Dustproof design 
with sealed optical block
The effect of dust has been minimised by 
completely sealing the optical block.The dust-
free design helps ensure that this DLP™ 
projector will continue to deliver crisp, sharp, 
high-resolution images over an extended 
service life.
Micro cut filter
The use of two lamp 
systems increases 
brightness and eliminates 
the need to interrupt a 
presentation if a lamp 
burns out (in dual lamp 
operation mode).
AC lamp
Radiator
Reserver tank
Cooling directly
DLP™ chip
NEW
Web browser control/monitoring 
and e-mail message alert
Other features
A lens-centred, symmetrical design provides 
flexible system layout, eliminating the need for 
any special considerations when planning the 
installation site.
Lens-centred design
The LAN terminals support PJLink™ class 1 
connection. Control with the same specifications 
is also possible when used in a multi-projector 
system with 
projectors of 
another brand.
PJLink™ compatibility
A wide adjustment range of the horizontal/
vertical lens shift assures distortion free images 
and adds convenience and versatility. 
(Horizontal : manual, Vertical : powered)
Horizontal/Vertical lens shift
Five optional lenses with different throw 
distances are available in addition to the 
supplied lens. These powered zoom/focus 
lenses enable the projectors to perform 
superbly in an array of projection environments.
Optional lenses for 
various venues
The PT-D4000E has an array of terminals-two RGB inputs including a 5-BNC connector, serial 
in/out, one S-video inputs, two remote in, one remote out, DVI-D and control capability-to support a 
broad range of projection needs HDCP. (High-Bandwidth Digital Content Protection) compliant. 
Using the serial terminal(RS232C),it is also possible to connect and operate AMX and Crestron 
control systems with ease.
Multiple terminalsControl panel and 
wireless remote 
control
The PT-D4000E uses the bayonet system, so 
lenses attach and detach with one-touch ease.
Easy lens replacement
The rear control panel allows for easy 
operation when the PT-D4000E is set 
on a desk or floor. New wireless 
remote control with longer 
transmission capacity of 30 m.
•Mechanical lens shutter
•Direct power off
•Flexible angle setting
•Easy replacement of dust filter and lamp
•ID assignment for up to 65 units
•Coordinated group control for up to 
  26 groups (A-Z)
•Digital vertical keystone correction
•Built-in test pattern
•Selectable 9-language on-screen menu
  (English, German, French, Spanish, Italian,
   Russian,Japanese, Chinese, Korean)
•Anti-theft features with chain opening
Panasonic works from every angle to minimise 
environmental impact in the product design, 
production and delivery processes, and in the 
performance of the product during its life 
cycle. The PT-D4000E reflects the following 
ecological considerations.
• No halogenated flame retardants are 
   used in the cabinet.
• The packing case and operating manual 
   are made from recycled paper.
• Auto Power Save activates standby mode 
   when no signal is input.
Ecology-conscious design
PC
PCPC
PCPC
Remote control
e-mail
e-mail
Internet
LAN
LAN
PT-D4000E
V50%0
Screen centre
H
+10%
0Screen centre
-10%
PT-D4000ECompany A
projectorCompany B
projector
Company C
controller
LAN
PC PCPC
Newly developed AC lamps with full 210 
watts of power offer excellent brightness and 
greater reliability than other types. A new lamp 
drive system also lowers the stress on the lamp 
electrodes while the lamps are lit. The new 
lamps have a lifetime of approximately 3,000 
hours, which is reassuring 
for applications where the 
projector is frequently 
used. The AC lamps also 
minimise colour 
irregularities.
Anybody can operate the PT-D4000E by remote 
control or monitor its status 
over a LAN network, because it 
is all done using the 
computer’s familiar Web 
browser. Furthermore, the 
PT-D4000E sends an E-mail 
message to notify the operator 
when an error has occurred, or 
a lamp needs to be replaced. 
						

							NOTES ON USENotes on Projector Placement and Operation:
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following 
precautions.
1. Never place objects on top of the projector while it is operating.
2. Make sure there is an unobstructed space of 500 mm or more around the projectors exhaust openings.
3. Do not stack projector units directly on top of one another. If two units must be stacked for backup use in 
ordinary projection, use a method as shown below and provide ample space between the units to ensure 
that exhaust heat does not accumulate near the intake opening or around the units. Dual stacked 
projection of the PT-D4000E is not recommended.
4. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the projector 
is between 0 ˚C/32 ˚F and 40 ˚C/104 ˚F*. Also make sure the projectors intake and exhaust openings are 
not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the 
intake openings.
* Even when the ambient temperature near the intake opening is 40 ˚C/104 ˚F or lower, an accumulation of hot air inside the cabinet may cause the 
protective circuit to activate and shut down the projector. Please give ample consideration to the design with regard to ambient temperature conditions.
Operating the Projector Continuously:
1. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical systems 
alternating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 
hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per day if the 
using the dual-lamp mode.
2.The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
•The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, 
emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes 
for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and us 
age conditions.
•The brightness of the lamp will gradually decrease with use.
Optional accessories
Replacement Lamp Unit
ET-LAD40
ET-LAD40W (twin pack)
Zoom Lens (1.3-1.8:1)
ET-DLE100
Zoom Lens (2.4-4.0:1)
ET-DLE200
Zoom Lens (3.8-6.0:1)
ET-DLE300
Zoom Lens (5.8-8.1:1)
ET-DLE400
Fixed Focus Lens (0.8:1)
ET-DLE050Ceiling Mount Bracket
for low celling
ET-PKD55S Ceiling Mount Bracket
for high celling
ET-PKD56H
Specifications


		








	

 	
	 

   
   
 !	
	  !  !
	 
	 

 
	 #	 $$
 	
 

 

 	 	
	 	
 	  
 		
 
 


 
 	  
 
 	


 		
 	 
  
 		  
 		  	 
 	


  !
 
 !		
 #
 	 
 	 	
 
 

 	
 		
#$%  		 
 %		 & 
	 (
  )* 	

+* 	 		 
 

	
	 ,
 %	
 (

	
  
 		 	  
 
 
 		 

  

 	 	
-  - 

 	
 - %	
 

 	 		 
  		 
 	 


.(/ 0112 %		 & 
	 (
   
 3-4111&5312%	216  
 
 !		

System
Device
Pixels
Lamp
Brightness (normal lamp)
Contrast ratio
Resolution  
Lens
Screen size
Lens shift
RGB input scanning
    frequency
Component signal
Video signal
Terminals  
    VIDEO IN
    S-VIDEO IN
    RGB1/YP
BPR IN
    RGB2 IN
    DVI-D IN
    RS-232C IN
    RS-232C OUT
    REMOTE 1 IN
    REMOTE 1 OUT
    REMOTE 2 IN
    LAN 
Keystone correction range
Installation 
Power cord length
Power supply
Power consumption
Dimensions (W x H x D)
Weight
Operating temperature
Operating humidity
Supplied accessoriesDLP™ Projection system
0.7 (diagonal) DLP™
  chip 4:3
786,432 (1,024 x 768) x 1 total of 786,432 pixels
210 W UHM™ lamp x 2 (Dual Lamp System)
4,000 lumens (dual lamp, high power mode)
1,600:1 (full on/full off, contrast mode: high)
1,024 x 768 pixels
Powered zoom/focus lens, 
Supplied lens: (1.8-2.4:1)
F = 1.7-2.0, f = 25.6-33.8 mm
50 - 600 inches
Vertical (powered), horizontal (manual)
f
H 15-91 kHz, fV 50-85 Hz
Dot clock 150 MHz or lower
480i, 480p, 576i, 576p, 720/60p, 720/50p, 1080/60i, 
1080/60p 1080/50i, 1080/50p
NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM
BNC
Mini DIN 4-pin
BNC x 5
D-sub HD 15-pin
24pin DVI 1.0 compliant, HDCP compatible, for single link
D-sub 9-pin female
D-sub 9-pin male
M3 jack
M3 jack
D-sub 9-pin female (parallel)
RJ-45x1, compliant with PJLink™ (class 1), 10Base-T/100Base-TX
±30˚ (with standard lens)
Front/rear, ceiling/floor
3.0m (9.10)
220-240 V AC, 50 / 60 Hz
520 W (570 VA) (15 W during standby mode with fan stopped)
530 x 167 x 441 mm (20-7/8 x 6-9/16 x 17-3/8) 
13.7 kg (30.2 lbs) with supplied lens
0 -45 ˚C (32 -113 ˚F)
20-80% (no condensation)
Power cord, Wireless/wired remote control unit,
AA Batteries (x 2) for remote control, Wire rope
Dimensionsunit: mm [inch]
7 (8 ,%#449:*,0;)-& 0;>#;-)3- ;:*,5;)-&> ;3)-&> ;; >#
530 (20-7/8)
167 (6-9/16)
429 (16-7/8)
Projection distance

 	


 ? .4@A/
Diagonal
image
sizeWith ET-DLE050
0.8:1
50
80
100
150
200
300
400
500
6000.7m
2.6
1.2m
4.2
1.6m
5.3
2.4m
8.0
3.2m
10.7
—
—
—
—
—
—
—
—LWith ET-DLE100
1.3-1.8:1
min.
1.4m
4.4
2.2m
7.1
2.8m
9.0
4.1m
13.5
5.5m
18.0
8.3m
27.1
11.0m
36.1
13.8m
45.2
16.6m
54.2max.
1.8m
5.9
2.9m
9.6
3.6m
12.0
5.5m
18.1
7.3m
24.2
11.1m
36.4
14.8m
48.6
18.5m
60.8
22.2m
73.0With supplied lens
1.8-2.4:1
min.
1.9m
6.0
3.0m
9.6
3.7m
12.1
5.6m
18.1
7.4m
24.2
11.1m
36.4
14.8m
48.6
18.5m
60.7
22.3m
72.9max.
2.4m
7.8
3.8m
12.6
4.8m
15.9
7.3m
23.9
9.7m
31.9
14.6m
48.0
19.5m
64.1
24.4m
80.2
29.3m
96.2With ET-DLE200
2.4-4.0:1
min.
2.5m
8.1
4.0m
13.1
5.0m
16.4
7.5m
24.6
10.1m
32.9
15.1m
49.4
20.1m
66.0
25.2m
82.5
30.2m
99.0With ET-DLE300
3.8-6.0:1
min.
3.9m
12.6
6.3m
20.5
7.9m
25.7
11.8m
38.7
15.8m
51.8
23.8m
77.8
31.7m
103.9
39.7m
130.0
47.6m
156.1max.
6.0m
19.7
9.7m
31.9
12.1m
39.9
18.3m
60.2
24.5m
80.4
36.8m
120.8
49.1m
161.2
61.4m
201.6
73.7m
242.0With ET-DLE400
5.8-8.1:1
min.
6.0m
19.4
9.5m
31.0
11.8m
38.7
17.7m
58.0
23.6m
77.3
35.4m
115.9
47.1m
154.5
58.9m
193.0
70.6m
231.6max.
8.2m
27.2
13.2m
43.4
16.5m
54.2
24.7m
81.2
32.9m
108.2
49.4m
162.2
65.9m
216.2
82.3m
270.2
98.8m
324.2
max.
4.0m
13.2
6.5m
21.3
8.1m
26.7
12.2m
40.3
16.4m
53.8
24.6m
80.8
32.8m
107.8
41.1m
134.9
49.3m
161.9