Panasonic Projector PT-CX300U User Manual

ENGLISH - 11
Important 
 
Information
Preparation
Getting Started
Basic Operation
Settings
Maintenance
Appendix
ContentsBe sure to read “Read this first!”. ( pages 2 to 9)
Important Informatio n
Read this first! ...........................................2
Contents
  ....................................................1 1
Precautions for Use .................................13
Cautions when transporting ..........................................13
Cautions when installing...

12 - ENGLISH
Important 
 
Information
Preparation
Getting Started
Basic Operation
Settings
Maintenance
Appendix
Information  ...................................................................46
3D ..............................................................47
3D ...........................................................................\
......47
3D Invert
  .......................................................................47
3D Format...

ENGLISH - 13
Important 
 
Information
Precautions for Use
Cautions when transporting
When transporting the projector, be careful not to touch the mirror. z
When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impac\
ts.  z
Doing so may damage the internal parts and result in malfunctions.
Do not transport the projector with the adjustable feet extended. Doing \
so may damage the adjustable feet.
 z
Cautions when installing
Do not set up the projector outdoors....

Precautions for Use
14 - ENGLISH
Important 
 
Information
Do not tilt the projector or place it on its side. J
Do not tilt the projector body more than approximately ±10° vertically or ±10° horizontally . Over-tilting may 
result in shortening the life of the components.
Cautions when setting the projectors J
Do not stack the projectors. z Do not block the ventilation ports (intake and exhaust) of the projector .
 z
Avoid heating and cooling air from the air conditioning system directly blow to the...

Precautions for Use
ENGLISH - 15
Important 
 
InformationCautions on use
In order to get the picture quality J
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light  z
from indoor lamps from shining onto the screen.
Depending on where the projector is used, heated air from an exhaust por\
t or warm or cold air from an air 
 zconditioner can cause a shimmering effect on screen. 
Avoid use in locations where exhaust or streams of air from projector,...

Precautions for Use
16 - ENGLISH
Important 
 
Information
Accessories
Make sure the following accessories are provided with your projector . Numbers in the brackets ( ) show the 
number of accessories.
 Wireless remote control 
unit (x1)
(H458SZ01G001) Computer cable (x1)
(H4200200G005) Lithium coin cell Battery
CR2025 (x1) CD-ROM (x1)
(H368SY01G001(B))
CR2025
3V
Included to the remotecontrol unit at the time of purchase)
Power Cord (x1)
(H420010CG001) AC power cord cover 
(x1)
(H758SZ02G001) AC power...

ENGLISH - 17
Preparation
About Your Projector
Remote control
(17)(16)
(15)
(14) (13) (12)
(11)
(18) (19)
(1)
(2)
(4)
(5)
(6)
(8)
(7)
(3)
(9)
(10)
(1)    Remote control signal emitter
(2)     button 
       Switches COMPUTER 1 or COMPUTER 2 
input. If either of the input is selected, press 
 button will switch to the other 
one.
(3)    <
> button
     Turns the projector on/off.
(4)     button      Displays [3D] menu.
(5)     button
       
Temporarily stops the image and mute the 
sound. Press again to...

About Your Projector
18 - ENGLISH
Preparation
Projector body
13
1
3
2
6
7
8
9
5
10
11
12
1
121212124
(1)  Air intake port
(2)  Mirror Cover
(3)  Remote control signal receiver
(4)  Air exhaust port
WARNING: 
„Keep your hands and other objects away from 
the air exhaust port.
Keep your hand and face away.
 z
Do not insert your finger. z
Keep heat-sensitive articles away. z
Heated air from the air exhaust port can cause burns 
or external damage.
(5)  Lamp cover  (
Æ page 61)
(6)  Connecting...

About Your Projector
ENGLISH - 19
Preparation
Control Panel and Indicators
1
9
8
2
35
67
4
(1)   indicator
  Indicates the projector’s status.
(2)  <
> button
  Turns the projector on/off.
(3)   button   Turns the main menu on/off.
(4)   Remote control signal receiver
(5)   ▲▼◄►  buttons
 Uses to operate menu.
(6)   button 
     
Automatically synchronize the projector to the 
input source for computer input.
Note
The  operation may not optimize the image  z position or the resolution, depending on the...

About Your Projector
20 - ENGLISH
Preparation
Connecting terminals
2 34
7 6
5
10
9
1
8
 
(1)  
   For service use.
(2)     Input
   Connects to HDMI input signals.
(3)  
     Outputs COMPUTER 1 or COMPUTER 2 signals 
input to the projector.
(4)      Connects to a LAN cable for network connection.
(5)    
      
    Connects to S-VIDEO IN input signal and AUDIO 
IN signal.
(6)      Outputs the audio signals input to the projector.
(7)      Connects to a computer via an RS-232C cable.
(8)...